From: Dave Jiang <dave.jiang@intel.com>
To: Jonathan Cameron <Jonathan.Cameron@huawei.com>,
Li Ming <ming.li@zohomail.com>
Cc: dave@stgolabs.net, alison.schofield@intel.com,
vishal.l.verma@intel.com, ira.weiny@intel.com,
dan.j.williams@intel.com, linux-cxl@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v1 7/7] cxl/region: Drop goto pattern of construct_region()
Date: Tue, 11 Feb 2025 14:24:54 -0700 [thread overview]
Message-ID: <d848f0ab-5055-4cda-8531-258c6fa7280e@intel.com> (raw)
In-Reply-To: <20250211173606.00004d33@huawei.com>
On 2/11/25 10:36 AM, Jonathan Cameron wrote:
> On Tue, 11 Feb 2025 15:57:27 +0800
> Li Ming <ming.li@zohomail.com> wrote:
>
>> Some operations need to be procted by the cxl_region_rwsem in construct
>> region(). Currently, construct_region() uses down_write() and up_write()
>> for the cxl_region_rwsem, so there is a goto pattern after down_write()
>> invoked to release cxl_region_rwsem.
>>
>> construct region() can be optimized to remove the goto pattern. The
>> changes are creating a new function called __construct_region() which
>> will include all checking and operations protected by the
>> cxl_region_rwsem, and using guard(rwsem_write) to replace down_write()
>> and up_write() in __construct_region().
>>
>> Signed-off-by: Li Ming <ming.li@zohomail.com>
>> ---
>> drivers/cxl/core/region.c | 71 +++++++++++++++++++++------------------
>> 1 file changed, 39 insertions(+), 32 deletions(-)
>>
>> diff --git a/drivers/cxl/core/region.c b/drivers/cxl/core/region.c
>> index 36f3771818d3..170278bdcedc 100644
>> --- a/drivers/cxl/core/region.c
>> +++ b/drivers/cxl/core/region.c
>> @@ -3217,49 +3217,31 @@ static int match_region_by_range(struct device *dev, const void *data)
>> return rc;
>> }
>>
>> -/* Establish an empty region covering the given HPA range */
>> -static struct cxl_region *construct_region(struct cxl_root_decoder *cxlrd,
>> - struct cxl_endpoint_decoder *cxled)
>> +static int __construct_region(struct cxl_region *cxlr,
>
> This is only factoring out part, so I'm not sure the naming makes sense.
> I don't have a better name however as this is doing various different things...
> setup_region() doesn't feel right either...
setup_auto_region()? construct_auto_region()?
DJ
>
>
>> + struct cxl_root_decoder *cxlrd,
>> + struct cxl_endpoint_decoder *cxled)
>> {
>> struct cxl_memdev *cxlmd = cxled_to_memdev(cxled);
>> - struct cxl_port *port = cxlrd_to_port(cxlrd);
>> struct range *hpa = &cxled->cxld.hpa_range;
>> struct cxl_region_params *p;
>> - struct cxl_region *cxlr;
>> struct resource *res;
>> int rc;
>>
>> - do {
>> - cxlr = __create_region(cxlrd, cxled->mode,
>> - atomic_read(&cxlrd->region_id));
>> - } while (IS_ERR(cxlr) && PTR_ERR(cxlr) == -EBUSY);
>> -
>> - if (IS_ERR(cxlr)) {
>> - dev_err(cxlmd->dev.parent,
>> - "%s:%s: %s failed assign region: %ld\n",
>> - dev_name(&cxlmd->dev), dev_name(&cxled->cxld.dev),
>> - __func__, PTR_ERR(cxlr));
>> - return cxlr;
>> - }
>> -
>> - down_write(&cxl_region_rwsem);
>> + guard(rwsem_write)(&cxl_region_rwsem);
>> p = &cxlr->params;
>> if (p->state >= CXL_CONFIG_INTERLEAVE_ACTIVE) {
>> dev_err(cxlmd->dev.parent,
>> "%s:%s: %s autodiscovery interrupted\n",
>> dev_name(&cxlmd->dev), dev_name(&cxled->cxld.dev),
>> __func__);
>> - rc = -EBUSY;
>> - goto err;
>> + return -EBUSY;
>> }
>>
>> set_bit(CXL_REGION_F_AUTO, &cxlr->flags);
>>
>> res = kmalloc(sizeof(*res), GFP_KERNEL);
>> - if (!res) {
>> - rc = -ENOMEM;
>> - goto err;
>> - }
>> + if (!res)
>> + return -ENOMEM;
>>
>> *res = DEFINE_RES_MEM_NAMED(hpa->start, range_len(hpa),
>> dev_name(&cxlr->dev));
>> @@ -3282,7 +3264,7 @@ static struct cxl_region *construct_region(struct cxl_root_decoder *cxlrd,
>>
>> rc = sysfs_update_group(&cxlr->dev.kobj, get_cxl_region_target_group());
>> if (rc)
>> - goto err;
>> + return rc;
>>
>> dev_dbg(cxlmd->dev.parent, "%s:%s: %s %s res: %pr iw: %d ig: %d\n",
>> dev_name(&cxlmd->dev), dev_name(&cxled->cxld.dev), __func__,
>> @@ -3291,14 +3273,39 @@ static struct cxl_region *construct_region(struct cxl_root_decoder *cxlrd,
>>
>> /* ...to match put_device() in cxl_add_to_region() */
>> get_device(&cxlr->dev);
>> - up_write(&cxl_region_rwsem);
>>
>> - return cxlr;
>> + return 0;
>> +}
>>
>> -err:
>> - up_write(&cxl_region_rwsem);
>> - devm_release_action(port->uport_dev, unregister_region, cxlr);
>> - return ERR_PTR(rc);
>> +/* Establish an empty region covering the given HPA range */
>> +static struct cxl_region *construct_region(struct cxl_root_decoder *cxlrd,
>> + struct cxl_endpoint_decoder *cxled)
>> +{
>> + struct cxl_memdev *cxlmd = cxled_to_memdev(cxled);
>> + struct cxl_port *port = cxlrd_to_port(cxlrd);
>> + struct cxl_region *cxlr;
>> + int rc;
>> +
>> + do {
>> + cxlr = __create_region(cxlrd, cxled->mode,
>> + atomic_read(&cxlrd->region_id));
>> + } while (IS_ERR(cxlr) && PTR_ERR(cxlr) == -EBUSY);
>> +
>> + if (IS_ERR(cxlr)) {
>> + dev_err(cxlmd->dev.parent,
>> + "%s:%s: %s failed assign region: %ld\n",
>> + dev_name(&cxlmd->dev), dev_name(&cxled->cxld.dev),
>> + __func__, PTR_ERR(cxlr));
>> + return cxlr;
>> + }
>> +
>> + rc = __construct_region(cxlr, cxlrd, cxled);
>> + if (rc) {
>> + devm_release_action(port->uport_dev, unregister_region, cxlr);
>> + return ERR_PTR(rc);
>> + }
>> +
>> + return cxlr;
>> }
>>
>> int cxl_add_to_region(struct cxl_port *root, struct cxl_endpoint_decoder *cxled)
>
next prev parent reply other threads:[~2025-02-11 21:24 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-11 7:57 [PATCH v1 0/7] Use guard() instead of rwsem locking Li Ming
2025-02-11 7:57 ` [PATCH v1 1/7] cxl/core: Use guard() to replace open-coded down_read/write() Li Ming
2025-02-11 17:26 ` Jonathan Cameron
2025-02-12 6:36 ` Li Ming
2025-02-11 7:57 ` [PATCH v1 2/7] cxl/core: cxl_mem_sanitize() cleanup Li Ming
2025-02-11 17:27 ` Jonathan Cameron
2025-02-11 7:57 ` [PATCH v1 3/7] cxl/memdev: cxl_memdev_ioctl() cleanup Li Ming
2025-02-11 17:28 ` Jonathan Cameron
2025-02-11 7:57 ` [PATCH v1 4/7] cxl/core: Use guard() to drop the goto pattern of cxl_dpa_free() Li Ming
2025-02-11 17:30 ` Jonathan Cameron
2025-02-11 7:57 ` [PATCH v1 5/7] cxl/core: Use guard() to drop goto pattern of cxl_dpa_alloc() Li Ming
2025-02-11 17:32 ` Jonathan Cameron
2025-02-11 7:57 ` [PATCH v1 6/7] cxl/region: Drop goto pattern in cxl_dax_region_alloc() Li Ming
2025-02-11 17:32 ` Jonathan Cameron
2025-02-11 7:57 ` [PATCH v1 7/7] cxl/region: Drop goto pattern of construct_region() Li Ming
2025-02-11 17:36 ` Jonathan Cameron
2025-02-11 21:24 ` Dave Jiang [this message]
2025-02-13 4:15 ` Li Ming
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d848f0ab-5055-4cda-8531-258c6fa7280e@intel.com \
--to=dave.jiang@intel.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=alison.schofield@intel.com \
--cc=dan.j.williams@intel.com \
--cc=dave@stgolabs.net \
--cc=ira.weiny@intel.com \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ming.li@zohomail.com \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox