From: Rishikesh Donadkar <r-donadkar@ti.com>
To: <jai.luthra@linux.dev>, <mripard@kernel.org>
Cc: <linux-kernel@vger.kernel.org>, <linux-media@vger.kernel.org>,
<devicetree@vger.kernel.org>, <r-donadkar@ti.com>,
<devarsht@ti.com>, <y-abhilashchandra@ti.com>,
<mchehab@kernel.org>, <robh@kernel.org>, <krzk+dt@kernel.org>,
<conor+dt@kernel.org>, <vaishnav.a@ti.com>, <s-jain1@ti.com>,
<vigneshr@ti.com>, <sakari.ailus@linux.intel.com>,
<hverkuil-cisco@xs4all.nl>, <tomi.valkeinen@ideasonboard.com>,
<jai.luthra@ideasonboard.com>,
<changhuang.liang@starfivetech.com>, <jack.zhu@starfivetech.com>,
<laurent.pinchart@ideasonboard.com>
Subject: [PATCH v3 05/13] media: ti: j721e-csi2rx: add a subdev for the core device
Date: Thu, 17 Apr 2025 12:25:46 +0530 [thread overview]
Message-ID: <20250417065554.437541-6-r-donadkar@ti.com> (raw)
In-Reply-To: <20250417065554.437541-1-r-donadkar@ti.com>
From: Jai Luthra <j-luthra@ti.com>
With single stream capture, it was simpler to use the video device as
the media entity representing the main TI CSI2RX device. Now with multi
stream capture coming into the picture, the model has shifted to each
video device having a link to the main device's subdev. The routing
would then be set on this subdev.
Add this subdev, link each context to this subdev's entity and link the
subdev's entity to the source. Also add an array of media pads. It will
have one sink pad and source pads equal to the number of contexts.
Co-developed-by: Pratyush Yadav <p.yadav@ti.com>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Rishikesh Donadkar <r-donadkar@ti.com>
---
.../platform/ti/j721e-csi2rx/j721e-csi2rx.c | 230 ++++++++++++++++--
1 file changed, 205 insertions(+), 25 deletions(-)
diff --git a/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c b/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c
index 523c890139098..ea7e331e872af 100644
--- a/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c
+++ b/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c
@@ -51,6 +51,11 @@
#define MAX_WIDTH_BYTES SZ_16K
#define MAX_HEIGHT_LINES SZ_16K
+#define TI_CSI2RX_PAD_SINK 0
+#define TI_CSI2RX_PAD_FIRST_SOURCE 1
+#define TI_CSI2RX_NUM_SOURCE_PADS 1
+#define TI_CSI2RX_NUM_PADS (1 + TI_CSI2RX_NUM_SOURCE_PADS)
+
#define DRAIN_TIMEOUT_MS 50
#define DRAIN_BUFFER_SIZE SZ_32K
@@ -97,6 +102,7 @@ struct ti_csi2rx_ctx {
struct mutex mutex; /* To serialize ioctls. */
struct v4l2_format v_fmt;
struct ti_csi2rx_dma dma;
+ struct media_pad pad;
u32 sequence;
u32 idx;
};
@@ -104,12 +110,15 @@ struct ti_csi2rx_ctx {
struct ti_csi2rx_dev {
struct device *dev;
void __iomem *shim;
+ struct mutex mutex; /* To serialize ioctls. */
+ unsigned int enable_count;
struct v4l2_device v4l2_dev;
struct media_device mdev;
struct media_pipeline pipe;
- struct media_pad pad;
+ struct media_pad pads[TI_CSI2RX_NUM_PADS];
struct v4l2_async_notifier notifier;
struct v4l2_subdev *source;
+ struct v4l2_subdev subdev;
struct ti_csi2rx_ctx ctx[TI_CSI2RX_NUM_CTX];
/* Buffer to drain stale data from PSI-L endpoint */
struct {
@@ -431,6 +440,15 @@ static int csi_async_notifier_complete(struct v4l2_async_notifier *notifier)
struct ti_csi2rx_dev *csi = dev_get_drvdata(notifier->v4l2_dev->dev);
int ret, i;
+ /* Create link from source to subdev */
+ ret = v4l2_create_fwnode_links_to_pad(csi->source,
+ &csi->pads[TI_CSI2RX_PAD_SINK],
+ MEDIA_LNK_FL_IMMUTABLE |
+ MEDIA_LNK_FL_ENABLED);
+ if (ret)
+ return ret;
+
+ /* Create and link video nodes for all DMA contexts */
for (i = 0; i < TI_CSI2RX_NUM_CTX; i++) {
struct ti_csi2rx_ctx *ctx = &csi->ctx[i];
struct video_device *vdev = &ctx->vdev;
@@ -438,13 +456,17 @@ static int csi_async_notifier_complete(struct v4l2_async_notifier *notifier)
ret = video_register_device(vdev, VFL_TYPE_VIDEO, -1);
if (ret)
goto unregister_dev;
- }
- ret = v4l2_create_fwnode_links_to_pad(csi->source, &csi->pad,
- MEDIA_LNK_FL_IMMUTABLE |
- MEDIA_LNK_FL_ENABLED);
- if (ret)
- goto unregister_dev;
+ ret = media_create_pad_link(&csi->subdev.entity,
+ TI_CSI2RX_PAD_FIRST_SOURCE + ctx->idx,
+ &vdev->entity, 0,
+ MEDIA_LNK_FL_IMMUTABLE |
+ MEDIA_LNK_FL_ENABLED);
+ if (ret) {
+ video_unregister_device(vdev);
+ goto unregister_dev;
+ }
+ }
ret = v4l2_device_register_subdev_nodes(&csi->v4l2_dev);
if (ret)
@@ -454,8 +476,10 @@ static int csi_async_notifier_complete(struct v4l2_async_notifier *notifier)
unregister_dev:
i--;
- for (; i >= 0; i--)
+ for (; i >= 0; i--) {
+ media_entity_remove_links(&csi->ctx[i].vdev.entity);
video_unregister_device(&csi->ctx[i].vdev);
+ }
return ret;
}
@@ -859,7 +883,7 @@ static int ti_csi2rx_start_streaming(struct vb2_queue *vq, unsigned int count)
dma->state = TI_CSI2RX_DMA_ACTIVE;
spin_unlock_irqrestore(&dma->lock, flags);
- ret = v4l2_subdev_call(csi->source, video, s_stream, 1);
+ ret = v4l2_subdev_call(&csi->subdev, video, s_stream, 1);
if (ret)
goto err_dma;
@@ -887,7 +911,7 @@ static void ti_csi2rx_stop_streaming(struct vb2_queue *vq)
writel(0, csi->shim + SHIM_CNTL);
writel(0, csi->shim + SHIM_DMACNTX(ctx->idx));
- ret = v4l2_subdev_call(csi->source, video, s_stream, 0);
+ ret = v4l2_subdev_call(&csi->subdev, video, s_stream, 0);
if (ret)
dev_err(csi->dev, "Failed to stop subdev stream\n");
@@ -903,8 +927,112 @@ static const struct vb2_ops csi_vb2_qops = {
.stop_streaming = ti_csi2rx_stop_streaming,
};
+static inline struct ti_csi2rx_dev *to_csi2rx_dev(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct ti_csi2rx_dev, subdev);
+}
+
+static int ti_csi2rx_sd_set_fmt(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *state,
+ struct v4l2_subdev_format *format)
+{
+ struct v4l2_mbus_framefmt *fmt;
+
+ /* No transcoding, don't allow setting source fmt */
+ if (format->pad > TI_CSI2RX_PAD_SINK)
+ return v4l2_subdev_get_fmt(sd, state, format);
+
+ if (!find_format_by_code(format->format.code))
+ format->format.code = ti_csi2rx_formats[0].code;
+
+ format->format.field = V4L2_FIELD_NONE;
+
+ fmt = v4l2_subdev_state_get_format(state, format->pad, format->stream);
+ *fmt = format->format;
+
+ fmt = v4l2_subdev_state_get_format(state, TI_CSI2RX_PAD_FIRST_SOURCE,
+ format->stream);
+ *fmt = format->format;
+
+ return 0;
+}
+
+static int ti_csi2rx_sd_init_state(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *state)
+{
+ struct v4l2_subdev_format format = {
+ .pad = TI_CSI2RX_PAD_SINK,
+ .format = {
+ .width = 640,
+ .height = 480,
+ .code = MEDIA_BUS_FMT_UYVY8_1X16,
+ .field = V4L2_FIELD_NONE,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .ycbcr_enc = V4L2_YCBCR_ENC_601,
+ .quantization = V4L2_QUANTIZATION_LIM_RANGE,
+ .xfer_func = V4L2_XFER_FUNC_SRGB,
+ },
+ };
+
+ return ti_csi2rx_sd_set_fmt(sd, state, &format);
+}
+
+static int ti_csi2rx_sd_s_stream(struct v4l2_subdev *sd, int enable)
+{
+ struct ti_csi2rx_dev *csi = to_csi2rx_dev(sd);
+ int ret = 0;
+
+ mutex_lock(&csi->mutex);
+
+ if (enable) {
+ if (csi->enable_count > 0) {
+ csi->enable_count++;
+ goto out;
+ }
+
+ ret = v4l2_subdev_call(csi->source, video, s_stream, 1);
+ if (ret)
+ goto out;
+
+ csi->enable_count++;
+ } else {
+ if (csi->enable_count == 0) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ if (--csi->enable_count > 0)
+ goto out;
+
+ ret = v4l2_subdev_call(csi->source, video, s_stream, 0);
+ }
+
+out:
+ mutex_unlock(&csi->mutex);
+ return ret;
+}
+
+static const struct v4l2_subdev_pad_ops ti_csi2rx_subdev_pad_ops = {
+ .get_fmt = v4l2_subdev_get_fmt,
+ .set_fmt = ti_csi2rx_sd_set_fmt,
+};
+
+static const struct v4l2_subdev_video_ops ti_csi2rx_subdev_video_ops = {
+ .s_stream = ti_csi2rx_sd_s_stream,
+};
+
+static const struct v4l2_subdev_ops ti_csi2rx_subdev_ops = {
+ .video = &ti_csi2rx_subdev_video_ops,
+ .pad = &ti_csi2rx_subdev_pad_ops,
+};
+
+static const struct v4l2_subdev_internal_ops ti_csi2rx_internal_ops = {
+ .init_state = ti_csi2rx_sd_init_state,
+};
+
static void ti_csi2rx_cleanup_v4l2(struct ti_csi2rx_dev *csi)
{
+ v4l2_subdev_cleanup(&csi->subdev);
media_device_unregister(&csi->mdev);
v4l2_device_unregister(&csi->v4l2_dev);
media_device_cleanup(&csi->mdev);
@@ -961,14 +1089,22 @@ static int ti_csi2rx_link_validate(struct media_link *link)
struct v4l2_subdev_format source_fmt = {
.which = V4L2_SUBDEV_FORMAT_ACTIVE,
.pad = link->source->index,
+ .stream = 0,
};
+ struct v4l2_subdev_state *state;
const struct ti_csi2rx_fmt *ti_fmt;
int ret;
- ret = v4l2_subdev_call_state_active(csi->source, pad,
- get_fmt, &source_fmt);
- if (ret)
- return ret;
+ state = v4l2_subdev_lock_and_get_active_state(&csi->subdev);
+ ret = v4l2_subdev_call(&csi->subdev, pad, get_fmt, state, &source_fmt);
+ v4l2_subdev_unlock_state(state);
+
+ if (ret) {
+ dev_dbg(csi->dev,
+ "Skipping validation as no format present on \"%s\":%u:0\n",
+ link->source->entity->name, link->source->index);
+ return 0;
+ }
if (source_fmt.format.width != csi_fmt->width) {
dev_dbg(csi->dev, "Width does not match (source %u, sink %u)\n",
@@ -998,8 +1134,9 @@ static int ti_csi2rx_link_validate(struct media_link *link)
if (ti_fmt->fourcc != csi_fmt->pixelformat) {
dev_dbg(csi->dev,
- "Cannot transform source fmt 0x%x to sink fmt 0x%x\n",
- ti_fmt->fourcc, csi_fmt->pixelformat);
+ "Cannot transform \"%s\":%u format %p4cc to %p4cc\n",
+ link->source->entity->name, link->source->index,
+ &ti_fmt->fourcc, &csi_fmt->pixelformat);
return -EPIPE;
}
@@ -1010,6 +1147,10 @@ static const struct media_entity_operations ti_csi2rx_video_entity_ops = {
.link_validate = ti_csi2rx_link_validate,
};
+static const struct media_entity_operations ti_csi2rx_subdev_entity_ops = {
+ .link_validate = v4l2_subdev_link_validate,
+};
+
static int ti_csi2rx_init_dma(struct ti_csi2rx_ctx *ctx)
{
struct dma_slave_config cfg = {
@@ -1041,6 +1182,7 @@ static int ti_csi2rx_init_dma(struct ti_csi2rx_ctx *ctx)
static int ti_csi2rx_v4l2_init(struct ti_csi2rx_dev *csi)
{
struct media_device *mdev = &csi->mdev;
+ struct v4l2_subdev *sd = &csi->subdev;
int ret;
mdev->dev = csi->dev;
@@ -1053,16 +1195,51 @@ static int ti_csi2rx_v4l2_init(struct ti_csi2rx_dev *csi)
ret = v4l2_device_register(csi->dev, &csi->v4l2_dev);
if (ret)
- return ret;
+ goto cleanup_media;
ret = media_device_register(mdev);
- if (ret) {
- v4l2_device_unregister(&csi->v4l2_dev);
- media_device_cleanup(mdev);
- return ret;
- }
+ if (ret)
+ goto unregister_v4l2;
+
+ v4l2_subdev_init(sd, &ti_csi2rx_subdev_ops);
+ sd->internal_ops = &ti_csi2rx_internal_ops;
+ sd->entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
+ sd->flags = V4L2_SUBDEV_FL_HAS_DEVNODE;
+ strscpy(sd->name, dev_name(csi->dev), sizeof(sd->name));
+ sd->dev = csi->dev;
+ sd->entity.ops = &ti_csi2rx_subdev_entity_ops;
+
+ csi->pads[TI_CSI2RX_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
+
+ for (unsigned int i = TI_CSI2RX_PAD_FIRST_SOURCE;
+ i < TI_CSI2RX_NUM_PADS; i++)
+ csi->pads[i].flags = MEDIA_PAD_FL_SOURCE;
+
+ ret = media_entity_pads_init(&sd->entity, ARRAY_SIZE(csi->pads),
+ csi->pads);
+ if (ret)
+ goto unregister_media;
+
+ ret = v4l2_subdev_init_finalize(sd);
+ if (ret)
+ goto unregister_media;
+
+ ret = v4l2_device_register_subdev(&csi->v4l2_dev, sd);
+ if (ret)
+ goto cleanup_subdev;
return 0;
+
+cleanup_subdev:
+ v4l2_subdev_cleanup(sd);
+unregister_media:
+ media_device_unregister(mdev);
+unregister_v4l2:
+ v4l2_device_unregister(&csi->v4l2_dev);
+cleanup_media:
+ media_device_cleanup(mdev);
+
+ return ret;
}
static int ti_csi2rx_init_ctx(struct ti_csi2rx_ctx *ctx)
@@ -1089,9 +1266,9 @@ static int ti_csi2rx_init_ctx(struct ti_csi2rx_ctx *ctx)
ti_csi2rx_fill_fmt(fmt, &ctx->v_fmt);
- csi->pad.flags = MEDIA_PAD_FL_SINK;
+ ctx->pad.flags = MEDIA_PAD_FL_SINK;
vdev->entity.ops = &ti_csi2rx_video_entity_ops;
- ret = media_entity_pads_init(&ctx->vdev.entity, 1, &csi->pad);
+ ret = media_entity_pads_init(&ctx->vdev.entity, 1, &ctx->pad);
if (ret)
return ret;
@@ -1147,6 +1324,8 @@ static int ti_csi2rx_probe(struct platform_device *pdev)
if (!csi->drain.vaddr)
return -ENOMEM;
+ mutex_init(&csi->mutex);
+
ret = ti_csi2rx_v4l2_init(csi);
if (ret)
goto err_v4l2;
@@ -1179,6 +1358,7 @@ static int ti_csi2rx_probe(struct platform_device *pdev)
ti_csi2rx_cleanup_ctx(&csi->ctx[i]);
ti_csi2rx_cleanup_v4l2(csi);
err_v4l2:
+ mutex_destroy(&csi->mutex);
dma_free_coherent(csi->dev, csi->drain.len, csi->drain.vaddr,
csi->drain.paddr);
return ret;
@@ -1194,7 +1374,7 @@ static void ti_csi2rx_remove(struct platform_device *pdev)
ti_csi2rx_cleanup_notifier(csi);
ti_csi2rx_cleanup_v4l2(csi);
-
+ mutex_destroy(&csi->mutex);
dma_free_coherent(csi->dev, csi->drain.len, csi->drain.vaddr,
csi->drain.paddr);
}
--
2.34.1
next prev parent reply other threads:[~2025-04-17 6:56 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-17 6:55 [PATCH v3 00/13] media: cadence,ti: CSI2RX Multistream Support Rishikesh Donadkar
2025-04-17 6:55 ` [PATCH v3 01/13] dt-bindings: media: ti,j721e-csi2rx-shim: Support 32 dma chans Rishikesh Donadkar
2025-04-21 11:15 ` Laurent Pinchart
2025-04-21 22:26 ` Rob Herring (Arm)
2025-04-17 6:55 ` [PATCH v3 02/13] media: ti: j721e-csi2rx: separate out device and context Rishikesh Donadkar
2025-04-21 11:32 ` Laurent Pinchart
2025-04-30 11:01 ` Rishikesh Donadkar
2025-05-09 8:15 ` Rishikesh Donadkar
2025-04-17 6:55 ` [PATCH v3 03/13] media: ti: j721e-csi2rx: prepare SHIM code for multiple contexts Rishikesh Donadkar
2025-04-21 11:33 ` Laurent Pinchart
2025-04-17 6:55 ` [PATCH v3 04/13] media: ti: j721e-csi2rx: allocate DMA channel based on context index Rishikesh Donadkar
2025-04-21 11:36 ` Laurent Pinchart
2025-04-17 6:55 ` Rishikesh Donadkar [this message]
2025-04-21 13:12 ` [PATCH v3 05/13] media: ti: j721e-csi2rx: add a subdev for the core device Laurent Pinchart
2025-05-03 5:54 ` Rishikesh Donadkar
2025-04-17 6:55 ` [PATCH v3 06/13] media: ti: j721e-csi2rx: get number of contexts from device tree Rishikesh Donadkar
2025-04-21 13:20 ` Laurent Pinchart
2025-05-03 5:59 ` Rishikesh Donadkar
2025-04-17 6:55 ` [PATCH v3 07/13] media: cadence: csi2rx: add get_frame_desc wrapper Rishikesh Donadkar
2025-04-21 7:00 ` 回复: " Changhuang Liang
2025-04-21 13:22 ` Laurent Pinchart
2025-04-17 6:55 ` [PATCH v3 08/13] media: ti: j721e-csi2rx: add support for processing virtual channels Rishikesh Donadkar
2025-04-21 13:34 ` Laurent Pinchart
2025-05-05 7:06 ` Rishikesh Donadkar
2025-04-17 6:55 ` [PATCH v3 09/13] media: cadence: csi2rx: Use new enable stream APIs Rishikesh Donadkar
2025-04-21 7:01 ` 回复: " Changhuang Liang
2025-04-21 13:25 ` Laurent Pinchart
2025-04-17 6:55 ` [PATCH v3 10/13] media: cadence: csi2rx: Enable multi-stream support Rishikesh Donadkar
2025-04-21 7:02 ` 回复: " Changhuang Liang
2025-04-21 13:57 ` Laurent Pinchart
2025-05-06 11:06 ` Rishikesh Donadkar
2025-05-09 8:47 ` Laurent Pinchart
2025-04-17 6:55 ` [PATCH v3 11/13] media: ti: j721e-csi2rx: add multistream support Rishikesh Donadkar
2025-04-17 6:55 ` [PATCH v3 12/13] media: ti: j721e-csi2rx: Submit all available buffers Rishikesh Donadkar
2025-04-17 6:55 ` [PATCH v3 13/13] media: ti: j721e-csi2rx: Change the drain architecture for multistream Rishikesh Donadkar
2025-04-25 11:35 ` Jai Luthra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250417065554.437541-6-r-donadkar@ti.com \
--to=r-donadkar@ti.com \
--cc=changhuang.liang@starfivetech.com \
--cc=conor+dt@kernel.org \
--cc=devarsht@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=hverkuil-cisco@xs4all.nl \
--cc=jack.zhu@starfivetech.com \
--cc=jai.luthra@ideasonboard.com \
--cc=jai.luthra@linux.dev \
--cc=krzk+dt@kernel.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=mripard@kernel.org \
--cc=robh@kernel.org \
--cc=s-jain1@ti.com \
--cc=sakari.ailus@linux.intel.com \
--cc=tomi.valkeinen@ideasonboard.com \
--cc=vaishnav.a@ti.com \
--cc=vigneshr@ti.com \
--cc=y-abhilashchandra@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox