From: Adrian Hunter <adrian.hunter@intel.com>
To: alexandre.belloni@bootlin.com
Cc: Frank.Li@nxp.com, linux-i3c@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH V3 07/16] i3c: mipi-i3c-hci: Complete transfer lists immediately on error
Date: Mon, 4 May 2026 14:33:43 +0300 [thread overview]
Message-ID: <20260504113352.38490-8-adrian.hunter@intel.com> (raw)
In-Reply-To: <20260504113352.38490-1-adrian.hunter@intel.com>
In DMA mode, transfer lists are currently completed only when the final
transfer in the list completes. If an earlier transfer fails, the list is
left incomplete and callers wait until timeout.
There is no need to wait for a timeout, as the completion path in
i3c_hci_process_xfer() already checks for error status. Complete the
transfer list as soon as any transfer in the list reports an error.
This avoids unnecessary delays and spurious timeouts on error.
Complete a transfer list completion immediately there is an error.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
Changes in V3:
None
Changes in V2:
Renamed completing_xfer to final_xfer
drivers/i3c/master/mipi-i3c-hci/dma.c | 6 ++++--
drivers/i3c/master/mipi-i3c-hci/hci.h | 1 +
2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/i3c/master/mipi-i3c-hci/dma.c b/drivers/i3c/master/mipi-i3c-hci/dma.c
index 28e4d38f55d3..899fdf6555a8 100644
--- a/drivers/i3c/master/mipi-i3c-hci/dma.c
+++ b/drivers/i3c/master/mipi-i3c-hci/dma.c
@@ -502,6 +502,8 @@ static int hci_dma_queue_xfer(struct i3c_hci *hci,
struct hci_xfer *xfer = xfer_list + i;
u32 *ring_data = rh->xfer + rh->xfer_struct_sz * enqueue_ptr;
+ xfer->final_xfer = xfer_list + n - 1;
+
/* store cmd descriptor */
*ring_data++ = xfer->cmd_desc[0];
*ring_data++ = xfer->cmd_desc[1];
@@ -576,8 +578,8 @@ static void hci_dma_xfer_done(struct i3c_hci *hci, struct hci_rh_data *rh)
tid, xfer->cmd_tid);
/* TODO: do something about it? */
}
- if (xfer->completion)
- complete(xfer->completion);
+ if (xfer == xfer->final_xfer || RESP_STATUS(resp))
+ complete(xfer->final_xfer->completion);
if (RESP_STATUS(resp))
hci->enqueue_blocked = true;
}
diff --git a/drivers/i3c/master/mipi-i3c-hci/hci.h b/drivers/i3c/master/mipi-i3c-hci/hci.h
index d630400ec945..f07fc627d4d2 100644
--- a/drivers/i3c/master/mipi-i3c-hci/hci.h
+++ b/drivers/i3c/master/mipi-i3c-hci/hci.h
@@ -104,6 +104,7 @@ struct hci_xfer {
struct {
/* DMA specific */
struct i3c_dma *dma;
+ struct hci_xfer *final_xfer;
int ring_number;
int ring_entry;
};
--
2.51.0
next prev parent reply other threads:[~2026-05-04 11:34 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-04 11:33 [PATCH V3 00/16] i3c: mipi-i3c-hci: DMA abort, recovery and related improvements Adrian Hunter
2026-05-04 11:33 ` [PATCH V3 01/16] i3c: mipi-i3c-hci: Fix suspend behavior when bus disable falls back to software reset Adrian Hunter
2026-05-04 11:33 ` [PATCH V3 02/16] i3c: mipi-i3c-hci: Preserve RUN bit when aborting DMA ring Adrian Hunter
2026-05-04 11:33 ` [PATCH V3 03/16] i3c: mipi-i3c-hci: Prevent DMA enqueue while ring is aborting or in error Adrian Hunter
2026-05-04 11:33 ` [PATCH V3 04/16] i3c: mipi-i3c-hci: Wait for DMA ring restart to complete Adrian Hunter
2026-05-04 11:33 ` [PATCH V3 05/16] i3c: mipi-i3c-hci: Move hci_dma_xfer_done() definition Adrian Hunter
2026-05-04 11:33 ` [PATCH V3 06/16] i3c: mipi-i3c-hci: Call hci_dma_xfer_done() from dequeue path Adrian Hunter
2026-05-04 11:33 ` Adrian Hunter [this message]
2026-05-04 11:33 ` [PATCH V3 08/16] i3c: mipi-i3c-hci: Avoid restarting DMA ring after aborting wrong transfer Adrian Hunter
2026-05-04 11:33 ` [PATCH V3 09/16] i3c: mipi-i3c-hci: Add DMA ring abort/reset quirk for Intel controllers Adrian Hunter
2026-05-04 11:33 ` [PATCH V3 10/16] i3c: mipi-i3c-hci: Add DMA ring abort " Adrian Hunter
2026-05-04 11:33 ` [PATCH V3 11/16] i3c: mipi-i3c-hci: Factor out reset-and-restore helper Adrian Hunter
2026-05-04 11:33 ` [PATCH V3 12/16] i3c: mipi-i3c-hci: Add DMA-mode recovery for internal controller errors Adrian Hunter
2026-05-04 11:33 ` [PATCH V3 13/16] i3c: mipi-i3c-hci: Wait for NoOp commands to complete Adrian Hunter
2026-05-04 11:33 ` [PATCH V3 14/16] i3c: mipi-i3c-hci: Base timeouts on actual transfer start time Adrian Hunter
2026-05-04 11:33 ` [PATCH V3 15/16] i3c: mipi-i3c-hci: Consolidate DMA ring allocation Adrian Hunter
2026-05-04 11:33 ` [PATCH V3 16/16] i3c: mipi-i3c-hci: Increase DMA transfer ring size to maximum Adrian Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260504113352.38490-8-adrian.hunter@intel.com \
--to=adrian.hunter@intel.com \
--cc=Frank.Li@nxp.com \
--cc=alexandre.belloni@bootlin.com \
--cc=linux-i3c@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox