* BUG: kernel panic in kernel 2.6.0-test5-bk11
@ 2003-09-24 15:32 Andreas Feldmann
0 siblings, 0 replies; only message in thread
From: Andreas Feldmann @ 2003-09-24 15:32 UTC (permalink / raw)
To: linux-kernel
---One line summary of the problem:
kernel panic in kernel 2.6.0-test5-bk11
---Full description of the problem/report:
This morning I tried the newest kernel version 2.6.0-test5-bk11.
It didn't boot. Instead there was a kernel panic which looked like
this:
Call Trace:
[<c0143a2f>] invalidate_inode_pages+0x1f/0x30
[<c02698c7>] dp_md_run+0x157/0x460
[<c0120c3d>] printk+0x11d/0x180
[<c0269f04>] autorun_array+094/0xc0
[<c026a13b>] autorun_devices+0x20b/0x250
[<c026d05a>] autostart_arrays+0x2a/0xc6
[<c016f78b>] igrab+0x4b/0x50
[<c026b573>] md_ioctl+0x7a3/0x7e0
[<c01bb4dd>] devfs_open+0x10d/0x110
[<c0154fa5>] dentry_open+0x145/0x210
[<c0154e58>] filp_open+0x68/0x70
[<c0234473>] blkdev_ioctl+0xb3/0x45a
[<c0167fb3>] sys_ioctl+0xf3/0x280
[<c0362b6b>] md_run_setup+0x6b/0xc0
[<c0360f89>] prepare_namespace+0x19/0x150
[<c01050d7>] init+0x37/0x160
[<c01050a0>] init+0x0/0x160
[<c0108bc9>] kernel_thread_helper+0x5/0xc
Code: 8b 18 89 1c 24 e8 d3 dd ff ff 85 c0 89 c6 0f 84 89 00 00 00
<0> Kernel panic: Attempted to kill init!
I had a problem with the bk10 kernel too, which I already sent to the
software raid mailing list (I use raid0 with lvm - see below). I guess
this problem is related because it says something about md in the kernel
panic. But because I am not shure about that I'm sending it to
linux-kernel@vger.kernel.org.
The panic occurs shortly after the linux kernel is loaded. It prints
some stuff first and then panics. I guess the panic occurs when it tries
to load init.
---Keywords (i.e., modules, networking, kernel): kernel, raid, lvm
---Kernel version:
2.6.0-test5-bk11 (this is not from /proc/version since I have to use the
2.6.0-test5-bk3 - which works fine - to write this mail)
---Software (add the output of the ver_linux script here)
root@chaos:/usr/src/linux/scripts # ./ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux chaos.diy 2.6.0-test5-bk3 #1 Fri Sep 12 16:16:48 CEST 2003 i686
GNU/Linux
Gnu C 3.2.3
Gnu make 3.79.1
util-linux 2.11n
mount 2.11n
e2fsprogs 1.34-WIP
PPP 2.4.1
Linux C Library 2.3.2
Dynamic linker (ldd) 2.3.2
Procps 100.
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 5.0
Modules Loaded lp parport_pc parport fan thermal processor
button snd_ens1371 snd_rawmidi snd_ac97_codec snd_seq_device snd_pcm_oss
snd_pcm snd_page_alloc snd_timer snd_mixer_oss snd via_rhine mii crc32
ppp_generic slhc autofs4 cpuid hid ehci_hcd uhci_hcd usbcore nvidia
agpgart ipv6 sg sr_mod cdrom ide_scsi scsi_mod
---Processor information (from /proc/cpuinfo):
root@chaos:/proc # cat cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 8
model name : AMD Athlon(tm) XP 2200+
stepping : 1
cpu MHz : 1799.077
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow
bogomips : 3530.75
---Module information (from /proc/modules):
root@chaos:/proc # cat modules
lp 9760 0 - Live 0xe098c000
parport_pc 23368 1 - Live 0xe094d000
parport 28864 2 lp,parport_pc, Live 0xe0996000
fan 3976 0 - Live 0xe0827000
thermal 13832 0 - Live 0xe0948000
processor 14232 1 thermal, Live 0xe092a000
button 6100 0 - Live 0xe0937000
snd_ens1371 20036 1 - Live 0xe0907000
snd_rawmidi 25536 1 snd_ens1371, Live 0xe0940000
snd_ac97_codec 53892 1 snd_ens1371, Live 0xe097d000
snd_seq_device 8388 1 snd_rawmidi, Live 0xe0926000
snd_pcm_oss 52740 1 - Live 0xe096f000
snd_pcm 100352 2 snd_ens1371,snd_pcm_oss, Live 0xe0955000
snd_page_alloc 11844 1 snd_pcm, Live 0xe0914000
snd_timer 26240 1 snd_pcm, Live 0xe092f000
snd_mixer_oss 19392 1 snd_pcm_oss, Live 0xe090e000
snd 51844 8
snd_ens1371,snd_rawmidi,snd_ac97_codec,snd_seq_device,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss,
Live 0xe0918000
via_rhine 19784 0 - Live 0xe08f8000
mii 5184 1 via_rhine, Live 0xe08f5000
crc32 4352 1 via_rhine, Live 0xe0860000
ppp_generic 27848 0 - Live 0xe08ff000
slhc 7488 1 ppp_generic, Live 0xe0897000
autofs4 16320 0 - Live 0xe0863000
cpuid 2496 0 - Live 0xe083b000
hid 33472 0 - Live 0xe088d000
ehci_hcd 24832 0 - Live 0xe0885000
uhci_hcd 32968 0 - Live 0xe087b000
usbcore 110356 5 hid,ehci_hcd,uhci_hcd, Live 0xe089b000
nvidia 1702188 10 - Live 0xe0ac7000
agpgart 32648 0 - Live 0xe0872000
ipv6 242208 39 - Live 0xe08b8000
sg 33228 0 - Live 0xe0868000
sr_mod 16032 0 - Live 0xe0830000
cdrom 35744 1 sr_mod, Live 0xe0853000
ide_scsi 16000 0 - Live 0xe082b000
scsi_mod 77848 3 sg,sr_mod,ide_scsi, Live 0xe083e000
---Loaded driver and hardware information (/proc/ioports, /proc/iomem):
root@chaos:/proc # cat ioports
0000-001f : dma1
0020-0021 : pic1
0040-005f : timer
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
0378-037a : parport0
037b-037f : parport0
03c0-03df : vga+
03f6-03f6 : ide0
0cf8-0cff : PCI conf1
dc00-dcff : 0000:00:12.0
dc00-dcff : via-rhine
e000-e01f : 0000:00:10.0
e000-e01f : uhci-hcd
e400-e41f : 0000:00:10.1
e400-e41f : uhci-hcd
e800-e81f : 0000:00:10.2
e800-e81f : uhci-hcd
ec00-ec3f : 0000:00:0b.0
ec00-ec3f : Ensoniq AudioPCI
fc00-fc0f : 0000:00:11.1
fc00-fc07 : ide0
fc08-fc0f : ide1
root@chaos:/proc # cat iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000d2000-000d7fff : reserved
000f0000-000fffff : System ROM
00100000-1ffeffff : System RAM
00100000-002c9edd : Kernel code
002c9ede-0035c53f : Kernel data
1fff0000-1fff7fff : ACPI Tables
1fff8000-1fffffff : ACPI Non-volatile Storage
cdc00000-ddcfffff : PCI Bus #01
d0000000-d7ffffff : 0000:01:00.0
ddc80000-ddcfffff : 0000:01:00.0
dde00000-dfefffff : PCI Bus #01
de000000-deffffff : 0000:01:00.0
dffffe00-dffffeff : 0000:00:12.0
dffffe00-dffffeff : via-rhine
dfffff00-dfffffff : 0000:00:10.3
dfffff00-dfffffff : ehci_hcd
e0000000-e1ffffff : 0000:00:00.0
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
fff80000-ffffffff : reserved
---PCI information ('lspci -vvv' as root):
root@chaos:/proc # lspci -vvv
00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 3116
Subsystem: Unknown device 1849:3156
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 8
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=32M]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP]
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: dde00000-dfefffff
Prefetchable memory behind bridge: cdc00000-ddcfffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02)
Subsystem: Ensoniq: Unknown device 8001
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort+ <MAbort+ >SERR- <PERR-
Latency: 32 (3000ns min, 32000ns max)
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at ec00 [size=64]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.0 USB Controller: VIA Technologies, Inc. UHCI USB (rev 80)
(prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. UHCI USB
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at e000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.1 USB Controller: VIA Technologies, Inc. UHCI USB (rev 80)
(prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. UHCI USB
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at e400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 80)
(prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. UHCI USB
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin C routed to IRQ 21
Region 4: I/O ports at e800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.3 USB Controller: VIA Technologies, Inc.: Unknown device 3104 (rev
82) (prog-if 20)
Subsystem: VIA Technologies, Inc.: Unknown device 3104
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 10
Interrupt: pin D routed to IRQ 21
Region 0: Memory at dfffff00 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.0 ISA bridge: VIA Technologies, Inc.: Unknown device 3177
Subsystem: Unknown device 1849:3177
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)
(prog-if 8a [Master SecP PriP])
Subsystem: Unknown device 1849:0571
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 255
Region 4: I/O ports at fc00 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:12.0 Ethernet controller: VIA Technologies, Inc. Ethernet Controller
(rev 74)
Subsystem: VIA Technologies, Inc. Ethernet Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (750ns min, 2000ns max), cache line size 08
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at dc00 [size=256]
Region 1: Memory at dffffe00 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: nVidia Corporation: Unknown device
0253 (rev a3) (prog-if 00 [VGA])
Subsystem: CardExpert Technology: Unknown device 0002
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Region 2: Memory at ddc80000 (32-bit, prefetchable) [size=512K]
Expansion ROM at dfee0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
---SCSI information (from /proc/scsi/scsi):
root@chaos:/proc # cat scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: SONY Model: CD-ROM CDU5211 Rev: YYS7
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: YAMAHA Model: CRW8824E Rev: 1.00
Type: CD-ROM ANSI SCSI revision: 02
---Other information that might be relevant to the problem:
root@chaos:/proc # cat mdstat
Personalities : [raid0] [multipath]
md1 : active raid0 hdc3[1] hda5[0]
979648 blocks 4k chunks
md0 : active raid0 hdc2[1] hda6[0]
148874240 blocks 4k chunks
unused devices: <none>
root@chaos:/proc # mount
/dev/md1 on / type ext3 (rw,errors=remount-ro)
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
/dev/hda1 on /boot type ext3 (rw)
/dev/vg01/usr on /usr type ext3 (rw)
/dev/vg01/opt on /opt type ext3 (rw)
/dev/vg01/home on /home type ext3 (rw)
/dev/vg01/data on /mnt/data type ext3 (rw)
!!vg01 is a volume group on md0!!
--
"One world, one web, one program" -- Microsoft promotional ad
"Ein Volk, ein Reich, ein Fuehrer" -- Adolf Hitler
computers and internet gave you freedom. TCPA would TAKE your FREEDOM!
http://www.againsttcpa.com
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-09-24 15:33 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-09-24 15:32 BUG: kernel panic in kernel 2.6.0-test5-bk11 Andreas Feldmann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox