Re: [PATCH 2/7] arm64: dts: ti: k3-am65*: Use generic clock for serdes clock name

[Suman Anna <s-anna@ti.com>]

On 9/1/20 5:30 PM, Nishanth Menon wrote:
> Use clock@ naming for nodes following standard conventions of device
> tree (section 2.2.2 Generic Names recommendation in [1]).
> 
> [1] https://github.com/devicetree-org/devicetree-specification/tree/v0.3
> 
> Suggested-by: Suman Anna <s-anna@ti.com>
> Signed-off-by: Nishanth Menon <nm@ti.com>

Acked-by: Suman Anna <s-anna@ti.com>

> ---
>  arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
> index 336d09d6fec7..03e28fc256de 100644
> --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
> @@ -327,12 +327,12 @@
>  			reg = <0x00000210 0x4>;
>  		};
>  
> -		serdes0_clk: serdes_clk@4080 {
> +		serdes0_clk: clock@4080 {
>  			compatible = "syscon";
>  			reg = <0x00004080 0x4>;
>  		};
>  
> -		serdes1_clk: serdes_clk@4090 {
> +		serdes1_clk: clock@4090 {
>  			compatible = "syscon";
>  			reg = <0x00004090 0x4>;
>  		};
> 

Btw, there is also ehrpwm_tbclk alongside these nodes which is currently defined
as a syscon, but is actually a clock.

regards
Suman