From: Suman Anna <s-anna@ti.com>
To: Nishanth Menon <nm@ti.com>, Rob Herring <robh+dt@kernel.org>,
Tero Kristo <t-kristo@ti.com>
Cc: <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
Vignesh Raghavendra <vigneshr@ti.com>, <lokeshvutla@ti.com>,
<grygorii.strashko@ti.com>, <nsekhar@ti.com>
Subject: Re: [PATCH 3/7] arm64: dts: ti: k3-*: Use generic pinctrl for node names
Date: Tue, 1 Sep 2020 23:14:14 -0500 [thread overview]
Message-ID: <e70b2bcd-c642-5c3b-e8fd-c05d020fffbc@ti.com> (raw)
In-Reply-To: <20200901223059.14801-4-nm@ti.com>
On 9/1/20 5:30 PM, Nishanth Menon wrote:
> Use pinctrl@ naming for nodes following standard conventions of device
> tree (section 2.2.2 Generic Names recommendation in [1]).
>
> [1] https://github.com/devicetree-org/devicetree-specification/tree/v0.3
>
> Suggested-by: Suman Anna <s-anna@ti.com>
> Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Suman Anna <s-anna@ti.com>
> ---
> arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 4 ++--
> arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 2 +-
> arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 2 +-
> arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 2 +-
> 4 files changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
> index 03e28fc256de..9c96e3f58c86 100644
> --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
> @@ -134,7 +134,7 @@
> };
> };
>
> - main_pmx0: pinmux@11c000 {
> + main_pmx0: pinctrl@11c000 {
> compatible = "pinctrl-single";
> reg = <0x0 0x11c000 0x0 0x2e4>;
> #pinctrl-cells = <1>;
> @@ -142,7 +142,7 @@
> pinctrl-single,function-mask = <0xffffffff>;
> };
>
> - main_pmx1: pinmux@11c2e8 {
> + main_pmx1: pinctrl@11c2e8 {
> compatible = "pinctrl-single";
> reg = <0x0 0x11c2e8 0x0 0x24>;
> #pinctrl-cells = <1>;
> diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
> index 0765700a8ba8..bb498be2f0a4 100644
> --- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
> @@ -39,7 +39,7 @@
> reg = <0x43000014 0x4>;
> };
>
> - wkup_pmx0: pinmux@4301c000 {
> + wkup_pmx0: pinctrl@4301c000 {
> compatible = "pinctrl-single";
> reg = <0x4301c000 0x118>;
> #pinctrl-cells = <1>;
> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
> index 00a36a14efe7..1d2a7c05b6f3 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
> @@ -327,7 +327,7 @@
> };
> };
>
> - main_pmx0: pinmux@11c000 {
> + main_pmx0: pinctrl@11c000 {
> compatible = "pinctrl-single";
> /* Proxy 0 addressing */
> reg = <0x0 0x11c000 0x0 0x2b4>;
> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
> index c4a48e8d420a..9ad0266598ad 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
> @@ -53,7 +53,7 @@
> reg = <0x0 0x43000014 0x0 0x4>;
> };
>
> - wkup_pmx0: pinmux@4301c000 {
> + wkup_pmx0: pinctrl@4301c000 {
> compatible = "pinctrl-single";
> /* Proxy 0 addressing */
> reg = <0x00 0x4301c000 0x00 0x178>;
>
next prev parent reply other threads:[~2020-09-02 4:14 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-01 22:30 [PATCH 0/7] arm64: dts: ti: k3-*: Squash up node_name_chars_strict warnings Nishanth Menon
2020-09-01 22:30 ` [PATCH 1/7] arm64: dts: ti: k3-am65*: Use generic gpio for node names Nishanth Menon
2020-09-02 4:13 ` Suman Anna
2020-09-01 22:30 ` [PATCH 2/7] arm64: dts: ti: k3-am65*: Use generic clock for serdes clock name Nishanth Menon
2020-09-02 17:45 ` Suman Anna
2020-09-02 18:21 ` Nishanth Menon
2020-09-01 22:30 ` [PATCH 3/7] arm64: dts: ti: k3-*: Use generic pinctrl for node names Nishanth Menon
2020-09-02 4:14 ` Suman Anna [this message]
2020-09-01 22:30 ` [PATCH 4/7] arm64: dts: ti: k3-am65-base-board Use generic camera for node name instead of ov5640 Nishanth Menon
2020-09-02 4:14 ` Suman Anna
2020-09-01 22:30 ` [PATCH 5/7] arm64: dts: ti: k3-am65-wakeup: Use generic temperature-sensor for node name Nishanth Menon
2020-09-02 16:55 ` Suman Anna
2020-09-02 18:14 ` Nishanth Menon
2020-09-01 22:30 ` [PATCH 6/7] arm64: dts: ti: k3-*: Use generic adc for node names Nishanth Menon
2020-09-02 16:51 ` Suman Anna
2020-09-02 18:18 ` Nishanth Menon
2020-09-03 5:25 ` Vignesh Raghavendra
2020-09-03 11:23 ` Nishanth Menon
2020-09-01 22:30 ` [PATCH 7/7] arm64: dts: ti: k3-*: Fix up node_name_chars_strict errors Nishanth Menon
2020-09-02 16:54 ` Suman Anna
2020-09-02 18:16 ` Nishanth Menon
2020-09-02 3:36 ` [PATCH 0/7] arm64: dts: ti: k3-*: Squash up node_name_chars_strict warnings Lokesh Vutla
2020-09-03 13:00 ` [PATCH V2 0/8] arm64: dts: ti: k3-*: Squash up node_name_chars_strict warnings + hex usage Nishanth Menon
2020-09-07 11:54 ` Nishanth Menon
2020-09-03 13:00 ` [PATCH V2 1/8] arm64: dts: ti: k3-j721e: Use lower case hexadecimal Nishanth Menon
2020-09-03 13:23 ` Suman Anna
2020-09-03 13:23 ` Suman Anna
2020-09-03 14:01 ` Lokesh Vutla
2020-09-03 13:00 ` [PATCH V2 2/8] arm64: dts: ti: k3-am65-main: " Nishanth Menon
2020-09-03 13:24 ` Suman Anna
2020-09-03 14:02 ` Lokesh Vutla
2020-09-03 13:00 ` [PATCH V2 3/8] arm64: dts: ti: k3-am65*: Use generic gpio for node names Nishanth Menon
2020-09-03 13:00 ` [PATCH V2 4/8] arm64: dts: ti: k3-am65*: Use generic clock for syscon clock names Nishanth Menon
2020-09-03 13:21 ` Vignesh Raghavendra
2020-09-03 13:00 ` [PATCH V2 5/8] arm64: dts: ti: k3-*: Use generic pinctrl for node names Nishanth Menon
2020-09-03 13:00 ` [PATCH V2 6/8] arm64: dts: ti: k3-am65-base-board Use generic camera for node name instead of ov5640 Nishanth Menon
2020-09-03 13:00 ` [PATCH V2 7/8] arm64: dts: ti: k3-am65-wakeup: Use generic temperature-sensor for node name Nishanth Menon
2020-09-03 13:20 ` Vignesh Raghavendra
2020-09-03 13:00 ` [PATCH V2 8/8] arm64: dts: ti: k3-*: Fix up node_name_chars_strict warnings Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e70b2bcd-c642-5c3b-e8fd-c05d020fffbc@ti.com \
--to=s-anna@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=grygorii.strashko@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lokeshvutla@ti.com \
--cc=nm@ti.com \
--cc=nsekhar@ti.com \
--cc=robh+dt@kernel.org \
--cc=t-kristo@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox