From: Nishanth Menon <nm@ti.com>
To: Rob Herring <robh+dt@kernel.org>, Tero Kristo <t-kristo@ti.com>
Cc: <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
Suman Anna <s-anna@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
<lokeshvutla@ti.com>, <grygorii.strashko@ti.com>,
<nsekhar@ti.com>, Nishanth Menon <nm@ti.com>
Subject: [PATCH V2 0/8] arm64: dts: ti: k3-*: Squash up node_name_chars_strict warnings + hex usage
Date: Thu, 3 Sep 2020 08:00:07 -0500 [thread overview]
Message-ID: <20200903130015.21361-1-nm@ti.com> (raw)
In-Reply-To: <20200901223059.14801-1-nm@ti.com>
Hi,
This is a respin of v2 of the series posted as [1].
As part of this cleanup, I ran a cross check of nodes that are
part of K3 as of right now, Vs what is "generic" definition as per 0.3
dt specification [2].
Changes in v2:
- Based off 20200903
- Picked up Acks and reviewed-by from previous versions (please comment
if you disagree).
- Dropped tsadc rename [3] based on review
- Added 2 patches to fixup hexadecimal usage caught as part of review
- few additional fixups.
Nishanth Menon (8):
arm64: dts: ti: k3-j721e: Use lower case hexadecimal
arm64: dts: ti: k3-am65-main: Use lower case hexadecimal
arm64: dts: ti: k3-am65*: Use generic gpio for node names
arm64: dts: ti: k3-am65*: Use generic clock for syscon clock names
arm64: dts: ti: k3-*: Use generic pinctrl for node names
arm64: dts: ti: k3-am65-base-board Use generic camera for node name
instead of ov5640
arm64: dts: ti: k3-am65-wakeup: Use generic temperature-sensor for
node name
arm64: dts: ti: k3-*: Fix up node_name_chars_strict warnings
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 22 +++++++++----------
arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 4 ++--
arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 6 ++---
.../arm64/boot/dts/ti/k3-am654-base-board.dts | 18 +++++++--------
.../dts/ti/k3-am654-industrial-thermal.dtsi | 12 +++++-----
.../dts/ti/k3-j721e-common-proc-board.dts | 18 +++++++--------
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 8 +++----
.../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 4 ++--
arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi | 2 +-
arch/arm64/boot/dts/ti/k3-j721e.dtsi | 2 +-
10 files changed, 48 insertions(+), 48 deletions(-)
[1] v1: https://lore.kernel.org/linux-arm-kernel/20200901223059.14801-1-nm@ti.com/
[2] https://pastebin.ubuntu.com/p/Z5zGQydH3G/
[3] https://lore.kernel.org/linux-arm-kernel/9fb2f8f4-5eeb-6190-9cbf-b28084c58a8f@ti.com/
--
2.17.1
next prev parent reply other threads:[~2020-09-03 13:43 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-01 22:30 [PATCH 0/7] arm64: dts: ti: k3-*: Squash up node_name_chars_strict warnings Nishanth Menon
2020-09-01 22:30 ` [PATCH 1/7] arm64: dts: ti: k3-am65*: Use generic gpio for node names Nishanth Menon
2020-09-02 4:13 ` Suman Anna
2020-09-01 22:30 ` [PATCH 2/7] arm64: dts: ti: k3-am65*: Use generic clock for serdes clock name Nishanth Menon
2020-09-02 17:45 ` Suman Anna
2020-09-02 18:21 ` Nishanth Menon
2020-09-01 22:30 ` [PATCH 3/7] arm64: dts: ti: k3-*: Use generic pinctrl for node names Nishanth Menon
2020-09-02 4:14 ` Suman Anna
2020-09-01 22:30 ` [PATCH 4/7] arm64: dts: ti: k3-am65-base-board Use generic camera for node name instead of ov5640 Nishanth Menon
2020-09-02 4:14 ` Suman Anna
2020-09-01 22:30 ` [PATCH 5/7] arm64: dts: ti: k3-am65-wakeup: Use generic temperature-sensor for node name Nishanth Menon
2020-09-02 16:55 ` Suman Anna
2020-09-02 18:14 ` Nishanth Menon
2020-09-01 22:30 ` [PATCH 6/7] arm64: dts: ti: k3-*: Use generic adc for node names Nishanth Menon
2020-09-02 16:51 ` Suman Anna
2020-09-02 18:18 ` Nishanth Menon
2020-09-03 5:25 ` Vignesh Raghavendra
2020-09-03 11:23 ` Nishanth Menon
2020-09-01 22:30 ` [PATCH 7/7] arm64: dts: ti: k3-*: Fix up node_name_chars_strict errors Nishanth Menon
2020-09-02 16:54 ` Suman Anna
2020-09-02 18:16 ` Nishanth Menon
2020-09-02 3:36 ` [PATCH 0/7] arm64: dts: ti: k3-*: Squash up node_name_chars_strict warnings Lokesh Vutla
2020-09-03 13:00 ` Nishanth Menon [this message]
2020-09-07 11:54 ` [PATCH V2 0/8] arm64: dts: ti: k3-*: Squash up node_name_chars_strict warnings + hex usage Nishanth Menon
2020-09-03 13:00 ` [PATCH V2 1/8] arm64: dts: ti: k3-j721e: Use lower case hexadecimal Nishanth Menon
2020-09-03 13:23 ` Suman Anna
2020-09-03 13:23 ` Suman Anna
2020-09-03 14:01 ` Lokesh Vutla
2020-09-03 13:00 ` [PATCH V2 2/8] arm64: dts: ti: k3-am65-main: " Nishanth Menon
2020-09-03 13:24 ` Suman Anna
2020-09-03 14:02 ` Lokesh Vutla
2020-09-03 13:00 ` [PATCH V2 3/8] arm64: dts: ti: k3-am65*: Use generic gpio for node names Nishanth Menon
2020-09-03 13:00 ` [PATCH V2 4/8] arm64: dts: ti: k3-am65*: Use generic clock for syscon clock names Nishanth Menon
2020-09-03 13:21 ` Vignesh Raghavendra
2020-09-03 13:00 ` [PATCH V2 5/8] arm64: dts: ti: k3-*: Use generic pinctrl for node names Nishanth Menon
2020-09-03 13:00 ` [PATCH V2 6/8] arm64: dts: ti: k3-am65-base-board Use generic camera for node name instead of ov5640 Nishanth Menon
2020-09-03 13:00 ` [PATCH V2 7/8] arm64: dts: ti: k3-am65-wakeup: Use generic temperature-sensor for node name Nishanth Menon
2020-09-03 13:20 ` Vignesh Raghavendra
2020-09-03 13:00 ` [PATCH V2 8/8] arm64: dts: ti: k3-*: Fix up node_name_chars_strict warnings Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200903130015.21361-1-nm@ti.com \
--to=nm@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=grygorii.strashko@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lokeshvutla@ti.com \
--cc=nsekhar@ti.com \
--cc=robh+dt@kernel.org \
--cc=s-anna@ti.com \
--cc=t-kristo@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox