* [RFC PATCH v3] ceph: prevent a client from exceeding the MDS maximum xattr size
@ 2022-06-01 16:29 Luís Henriques
2022-06-02 2:33 ` Xiubo Li
0 siblings, 1 reply; 6+ messages in thread
From: Luís Henriques @ 2022-06-01 16:29 UTC (permalink / raw)
To: Jeff Layton, Xiubo Li, Ilya Dryomov, Gregory Farnum
Cc: ceph-devel, linux-kernel, Luís Henriques
The MDS tries to enforce a limit on the total key/values in extended
attributes. However, this limit is enforced only if doing a synchronous
operation (MDS_OP_SETXATTR) -- if we're buffering the xattrs, the MDS
doesn't have a chance to enforce these limits.
This patch adds support for decoding the xattrs maximum size setting that is
distributed in the mdsmap. Then, when setting an xattr, the kernel client
will revert to do a synchronous operation if that maximum size is exceeded.
While there, fix a dout() that would trigger a printk warning:
[ 98.718078] ------------[ cut here ]------------
[ 98.719012] precision 65536 too large
[ 98.719039] WARNING: CPU: 1 PID: 3755 at lib/vsprintf.c:2703 vsnprintf+0x5e3/0x600
...
URL: https://tracker.ceph.com/issues/55725
Signed-off-by: Luís Henriques <lhenriques@suse.de>
---
fs/ceph/mdsmap.c | 27 +++++++++++++++++++++++----
fs/ceph/xattr.c | 12 ++++++++----
include/linux/ceph/mdsmap.h | 1 +
3 files changed, 32 insertions(+), 8 deletions(-)
* Changes since v2
Well, a lot has changed since v2! Now the xattr max value setting is
obtained through the mdsmap, which needs to be decoded, and the feature
that was used in the previous revision was dropped. The drawback is that
the MDS isn't unable to know in advance if a client is aware of this xattr
max value.
* Changes since v1
Added support for new feature bit to get the MDS max_xattr_pairs_size
setting.
Also note that this patch relies on a patch that hasn't been merged yet
("ceph: use correct index when encoding client supported features"),
otherwise the new feature bit won't be correctly encoded.
diff --git a/fs/ceph/mdsmap.c b/fs/ceph/mdsmap.c
index 30387733765d..36b2bc18ca2a 100644
--- a/fs/ceph/mdsmap.c
+++ b/fs/ceph/mdsmap.c
@@ -13,6 +13,12 @@
#include "super.h"
+/*
+ * Maximum size of xattrs the MDS can handle per inode by default. This
+ * includes the attribute name and 4+4 bytes for the key/value sizes.
+ */
+#define MDS_MAX_XATTR_SIZE (1<<16) /* 64K */
+
#define CEPH_MDS_IS_READY(i, ignore_laggy) \
(m->m_info[i].state > 0 && ignore_laggy ? true : !m->m_info[i].laggy)
@@ -352,12 +358,10 @@ struct ceph_mdsmap *ceph_mdsmap_decode(void **p, void *end, bool msgr2)
__decode_and_drop_type(p, end, u8, bad_ext);
}
if (mdsmap_ev >= 8) {
- u32 name_len;
/* enabled */
ceph_decode_8_safe(p, end, m->m_enabled, bad_ext);
- ceph_decode_32_safe(p, end, name_len, bad_ext);
- ceph_decode_need(p, end, name_len, bad_ext);
- *p += name_len;
+ /* fs_name */
+ ceph_decode_skip_string(p, end, bad_ext);
}
/* damaged */
if (mdsmap_ev >= 9) {
@@ -370,6 +374,21 @@ struct ceph_mdsmap *ceph_mdsmap_decode(void **p, void *end, bool msgr2)
} else {
m->m_damaged = false;
}
+ if (mdsmap_ev >= 17) {
+ /* balancer */
+ ceph_decode_skip_string(p, end, bad_ext);
+ /* standby_count_wanted */
+ ceph_decode_skip_32(p, end, bad_ext);
+ /* old_max_mds */
+ ceph_decode_skip_32(p, end, bad_ext);
+ /* min_compat_client */
+ ceph_decode_skip_8(p, end, bad_ext);
+ /* required_client_features */
+ ceph_decode_skip_set(p, end, 64, bad_ext);
+ ceph_decode_64_safe(p, end, m->m_max_xattr_size, bad_ext);
+ } else {
+ m->m_max_xattr_size = MDS_MAX_XATTR_SIZE;
+ }
bad_ext:
dout("mdsmap_decode m_enabled: %d, m_damaged: %d, m_num_laggy: %d\n",
!!m->m_enabled, !!m->m_damaged, m->m_num_laggy);
diff --git a/fs/ceph/xattr.c b/fs/ceph/xattr.c
index 8c2dc2c762a4..67f046dac35c 100644
--- a/fs/ceph/xattr.c
+++ b/fs/ceph/xattr.c
@@ -1086,7 +1086,7 @@ static int ceph_sync_setxattr(struct inode *inode, const char *name,
flags |= CEPH_XATTR_REMOVE;
}
- dout("setxattr value=%.*s\n", (int)size, value);
+ dout("setxattr value size: %ld\n", size);
/* do request */
req = ceph_mdsc_create_request(mdsc, op, USE_AUTH_MDS);
@@ -1184,8 +1184,14 @@ int __ceph_setxattr(struct inode *inode, const char *name,
spin_lock(&ci->i_ceph_lock);
retry:
issued = __ceph_caps_issued(ci, NULL);
- if (ci->i_xattrs.version == 0 || !(issued & CEPH_CAP_XATTR_EXCL))
+ required_blob_size = __get_required_blob_size(ci, name_len, val_len);
+ if ((ci->i_xattrs.version == 0) || !(issued & CEPH_CAP_XATTR_EXCL) ||
+ (required_blob_size >= mdsc->mdsmap->m_max_xattr_size)) {
+ dout("%s do sync setxattr: version: %llu size: %d max: %llu\n",
+ __func__, ci->i_xattrs.version, required_blob_size,
+ mdsc->mdsmap->m_max_xattr_size);
goto do_sync;
+ }
if (!lock_snap_rwsem && !ci->i_head_snapc) {
lock_snap_rwsem = true;
@@ -1201,8 +1207,6 @@ int __ceph_setxattr(struct inode *inode, const char *name,
ceph_cap_string(issued));
__build_xattrs(inode);
- required_blob_size = __get_required_blob_size(ci, name_len, val_len);
-
if (!ci->i_xattrs.prealloc_blob ||
required_blob_size > ci->i_xattrs.prealloc_blob->alloc_len) {
struct ceph_buffer *blob;
diff --git a/include/linux/ceph/mdsmap.h b/include/linux/ceph/mdsmap.h
index 523fd0452856..4c3e0648dc27 100644
--- a/include/linux/ceph/mdsmap.h
+++ b/include/linux/ceph/mdsmap.h
@@ -25,6 +25,7 @@ struct ceph_mdsmap {
u32 m_session_timeout; /* seconds */
u32 m_session_autoclose; /* seconds */
u64 m_max_file_size;
+ u64 m_max_xattr_size; /* maximum size for xattrs blob */
u32 m_max_mds; /* expected up:active mds number */
u32 m_num_active_mds; /* actual up:active mds number */
u32 possible_max_rank; /* possible max rank index */
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [RFC PATCH v3] ceph: prevent a client from exceeding the MDS maximum xattr size
2022-06-01 16:29 [RFC PATCH v3] ceph: prevent a client from exceeding the MDS maximum xattr size Luís Henriques
@ 2022-06-02 2:33 ` Xiubo Li
2022-06-02 9:26 ` Luís Henriques
0 siblings, 1 reply; 6+ messages in thread
From: Xiubo Li @ 2022-06-02 2:33 UTC (permalink / raw)
To: Luís Henriques, Jeff Layton, Ilya Dryomov, Gregory Farnum
Cc: ceph-devel, linux-kernel
On 6/2/22 12:29 AM, Luís Henriques wrote:
> The MDS tries to enforce a limit on the total key/values in extended
> attributes. However, this limit is enforced only if doing a synchronous
> operation (MDS_OP_SETXATTR) -- if we're buffering the xattrs, the MDS
> doesn't have a chance to enforce these limits.
>
> This patch adds support for decoding the xattrs maximum size setting that is
> distributed in the mdsmap. Then, when setting an xattr, the kernel client
> will revert to do a synchronous operation if that maximum size is exceeded.
>
> While there, fix a dout() that would trigger a printk warning:
>
> [ 98.718078] ------------[ cut here ]------------
> [ 98.719012] precision 65536 too large
> [ 98.719039] WARNING: CPU: 1 PID: 3755 at lib/vsprintf.c:2703 vsnprintf+0x5e3/0x600
> ...
>
> URL: https://tracker.ceph.com/issues/55725
> Signed-off-by: Luís Henriques <lhenriques@suse.de>
> ---
> fs/ceph/mdsmap.c | 27 +++++++++++++++++++++++----
> fs/ceph/xattr.c | 12 ++++++++----
> include/linux/ceph/mdsmap.h | 1 +
> 3 files changed, 32 insertions(+), 8 deletions(-)
>
> * Changes since v2
>
> Well, a lot has changed since v2! Now the xattr max value setting is
> obtained through the mdsmap, which needs to be decoded, and the feature
> that was used in the previous revision was dropped. The drawback is that
> the MDS isn't unable to know in advance if a client is aware of this xattr
> max value.
>
> * Changes since v1
>
> Added support for new feature bit to get the MDS max_xattr_pairs_size
> setting.
>
> Also note that this patch relies on a patch that hasn't been merged yet
> ("ceph: use correct index when encoding client supported features"),
> otherwise the new feature bit won't be correctly encoded.
>
> diff --git a/fs/ceph/mdsmap.c b/fs/ceph/mdsmap.c
> index 30387733765d..36b2bc18ca2a 100644
> --- a/fs/ceph/mdsmap.c
> +++ b/fs/ceph/mdsmap.c
> @@ -13,6 +13,12 @@
>
> #include "super.h"
>
> +/*
> + * Maximum size of xattrs the MDS can handle per inode by default. This
> + * includes the attribute name and 4+4 bytes for the key/value sizes.
> + */
> +#define MDS_MAX_XATTR_SIZE (1<<16) /* 64K */
> +
> #define CEPH_MDS_IS_READY(i, ignore_laggy) \
> (m->m_info[i].state > 0 && ignore_laggy ? true : !m->m_info[i].laggy)
>
> @@ -352,12 +358,10 @@ struct ceph_mdsmap *ceph_mdsmap_decode(void **p, void *end, bool msgr2)
> __decode_and_drop_type(p, end, u8, bad_ext);
> }
> if (mdsmap_ev >= 8) {
> - u32 name_len;
> /* enabled */
> ceph_decode_8_safe(p, end, m->m_enabled, bad_ext);
> - ceph_decode_32_safe(p, end, name_len, bad_ext);
> - ceph_decode_need(p, end, name_len, bad_ext);
> - *p += name_len;
> + /* fs_name */
> + ceph_decode_skip_string(p, end, bad_ext);
> }
> /* damaged */
> if (mdsmap_ev >= 9) {
> @@ -370,6 +374,21 @@ struct ceph_mdsmap *ceph_mdsmap_decode(void **p, void *end, bool msgr2)
> } else {
> m->m_damaged = false;
> }
> + if (mdsmap_ev >= 17) {
> + /* balancer */
> + ceph_decode_skip_string(p, end, bad_ext);
> + /* standby_count_wanted */
> + ceph_decode_skip_32(p, end, bad_ext);
> + /* old_max_mds */
> + ceph_decode_skip_32(p, end, bad_ext);
> + /* min_compat_client */
> + ceph_decode_skip_8(p, end, bad_ext);
This is incorrect.
If mdsmap_ev == 15 the min_compat_client will be a feature_bitset_t
instead of int8_t.
> + /* required_client_features */
> + ceph_decode_skip_set(p, end, 64, bad_ext);
> + ceph_decode_64_safe(p, end, m->m_max_xattr_size, bad_ext);
> + } else {
> + m->m_max_xattr_size = MDS_MAX_XATTR_SIZE;
> + }
> bad_ext:
> dout("mdsmap_decode m_enabled: %d, m_damaged: %d, m_num_laggy: %d\n",
> !!m->m_enabled, !!m->m_damaged, m->m_num_laggy);
> diff --git a/fs/ceph/xattr.c b/fs/ceph/xattr.c
> index 8c2dc2c762a4..67f046dac35c 100644
> --- a/fs/ceph/xattr.c
> +++ b/fs/ceph/xattr.c
> @@ -1086,7 +1086,7 @@ static int ceph_sync_setxattr(struct inode *inode, const char *name,
> flags |= CEPH_XATTR_REMOVE;
> }
>
> - dout("setxattr value=%.*s\n", (int)size, value);
> + dout("setxattr value size: %ld\n", size);
>
> /* do request */
> req = ceph_mdsc_create_request(mdsc, op, USE_AUTH_MDS);
> @@ -1184,8 +1184,14 @@ int __ceph_setxattr(struct inode *inode, const char *name,
> spin_lock(&ci->i_ceph_lock);
> retry:
> issued = __ceph_caps_issued(ci, NULL);
> - if (ci->i_xattrs.version == 0 || !(issued & CEPH_CAP_XATTR_EXCL))
> + required_blob_size = __get_required_blob_size(ci, name_len, val_len);
> + if ((ci->i_xattrs.version == 0) || !(issued & CEPH_CAP_XATTR_EXCL) ||
> + (required_blob_size >= mdsc->mdsmap->m_max_xattr_size)) {
Shouldn't it be '>' instead ?
We'd better always force to do a sync request with old ceph. Just check
if the mdsmap_ev < 17. It's not safe to buffer it because it maybe
discarded as your ceph PR does.
-- Xiubo
> + dout("%s do sync setxattr: version: %llu size: %d max: %llu\n",
> + __func__, ci->i_xattrs.version, required_blob_size,
> + mdsc->mdsmap->m_max_xattr_size);
> goto do_sync;
> + }
>
> if (!lock_snap_rwsem && !ci->i_head_snapc) {
> lock_snap_rwsem = true;
> @@ -1201,8 +1207,6 @@ int __ceph_setxattr(struct inode *inode, const char *name,
> ceph_cap_string(issued));
> __build_xattrs(inode);
>
> - required_blob_size = __get_required_blob_size(ci, name_len, val_len);
> -
> if (!ci->i_xattrs.prealloc_blob ||
> required_blob_size > ci->i_xattrs.prealloc_blob->alloc_len) {
> struct ceph_buffer *blob;
> diff --git a/include/linux/ceph/mdsmap.h b/include/linux/ceph/mdsmap.h
> index 523fd0452856..4c3e0648dc27 100644
> --- a/include/linux/ceph/mdsmap.h
> +++ b/include/linux/ceph/mdsmap.h
> @@ -25,6 +25,7 @@ struct ceph_mdsmap {
> u32 m_session_timeout; /* seconds */
> u32 m_session_autoclose; /* seconds */
> u64 m_max_file_size;
> + u64 m_max_xattr_size; /* maximum size for xattrs blob */
> u32 m_max_mds; /* expected up:active mds number */
> u32 m_num_active_mds; /* actual up:active mds number */
> u32 possible_max_rank; /* possible max rank index */
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [RFC PATCH v3] ceph: prevent a client from exceeding the MDS maximum xattr size
2022-06-02 2:33 ` Xiubo Li
@ 2022-06-02 9:26 ` Luís Henriques
2022-06-02 9:42 ` Xiubo Li
0 siblings, 1 reply; 6+ messages in thread
From: Luís Henriques @ 2022-06-02 9:26 UTC (permalink / raw)
To: Xiubo Li
Cc: Jeff Layton, Ilya Dryomov, Gregory Farnum, ceph-devel,
linux-kernel
Xiubo Li <xiubli@redhat.com> writes:
> On 6/2/22 12:29 AM, Luís Henriques wrote:
>> The MDS tries to enforce a limit on the total key/values in extended
>> attributes. However, this limit is enforced only if doing a synchronous
>> operation (MDS_OP_SETXATTR) -- if we're buffering the xattrs, the MDS
>> doesn't have a chance to enforce these limits.
>>
>> This patch adds support for decoding the xattrs maximum size setting that is
>> distributed in the mdsmap. Then, when setting an xattr, the kernel client
>> will revert to do a synchronous operation if that maximum size is exceeded.
>>
>> While there, fix a dout() that would trigger a printk warning:
>>
>> [ 98.718078] ------------[ cut here ]------------
>> [ 98.719012] precision 65536 too large
>> [ 98.719039] WARNING: CPU: 1 PID: 3755 at lib/vsprintf.c:2703 vsnprintf+0x5e3/0x600
>> ...
>>
>> URL: https://tracker.ceph.com/issues/55725
>> Signed-off-by: Luís Henriques <lhenriques@suse.de>
>> ---
>> fs/ceph/mdsmap.c | 27 +++++++++++++++++++++++----
>> fs/ceph/xattr.c | 12 ++++++++----
>> include/linux/ceph/mdsmap.h | 1 +
>> 3 files changed, 32 insertions(+), 8 deletions(-)
>>
>> * Changes since v2
>>
>> Well, a lot has changed since v2! Now the xattr max value setting is
>> obtained through the mdsmap, which needs to be decoded, and the feature
>> that was used in the previous revision was dropped. The drawback is that
>> the MDS isn't unable to know in advance if a client is aware of this xattr
>> max value.
>>
>> * Changes since v1
>>
>> Added support for new feature bit to get the MDS max_xattr_pairs_size
>> setting.
>>
>> Also note that this patch relies on a patch that hasn't been merged yet
>> ("ceph: use correct index when encoding client supported features"),
>> otherwise the new feature bit won't be correctly encoded.
>>
>> diff --git a/fs/ceph/mdsmap.c b/fs/ceph/mdsmap.c
>> index 30387733765d..36b2bc18ca2a 100644
>> --- a/fs/ceph/mdsmap.c
>> +++ b/fs/ceph/mdsmap.c
>> @@ -13,6 +13,12 @@
>> #include "super.h"
>> +/*
>> + * Maximum size of xattrs the MDS can handle per inode by default. This
>> + * includes the attribute name and 4+4 bytes for the key/value sizes.
>> + */
>> +#define MDS_MAX_XATTR_SIZE (1<<16) /* 64K */
>> +
>> #define CEPH_MDS_IS_READY(i, ignore_laggy) \
>> (m->m_info[i].state > 0 && ignore_laggy ? true : !m->m_info[i].laggy)
>> @@ -352,12 +358,10 @@ struct ceph_mdsmap *ceph_mdsmap_decode(void **p, void
>> *end, bool msgr2)
>> __decode_and_drop_type(p, end, u8, bad_ext);
>> }
>> if (mdsmap_ev >= 8) {
>> - u32 name_len;
>> /* enabled */
>> ceph_decode_8_safe(p, end, m->m_enabled, bad_ext);
>> - ceph_decode_32_safe(p, end, name_len, bad_ext);
>> - ceph_decode_need(p, end, name_len, bad_ext);
>> - *p += name_len;
>> + /* fs_name */
>> + ceph_decode_skip_string(p, end, bad_ext);
>> }
>> /* damaged */
>> if (mdsmap_ev >= 9) {
>> @@ -370,6 +374,21 @@ struct ceph_mdsmap *ceph_mdsmap_decode(void **p, void *end, bool msgr2)
>> } else {
>> m->m_damaged = false;
>> }
>> + if (mdsmap_ev >= 17) {
>> + /* balancer */
>> + ceph_decode_skip_string(p, end, bad_ext);
>> + /* standby_count_wanted */
>> + ceph_decode_skip_32(p, end, bad_ext);
>> + /* old_max_mds */
>> + ceph_decode_skip_32(p, end, bad_ext);
>> + /* min_compat_client */
>> + ceph_decode_skip_8(p, end, bad_ext);
>
> This is incorrect.
>
> If mdsmap_ev == 15 the min_compat_client will be a feature_bitset_t instead of
> int8_t.
Hmm... can you point me at where that's done in the code? As usual, I'm
confused with that code and simply can't see that.
Also, if that happens only when mdsmap_ev == 15, then there's no problem
because that branch is only taken if it's >= 17.
>
>
>> + /* required_client_features */
>> + ceph_decode_skip_set(p, end, 64, bad_ext);
>> + ceph_decode_64_safe(p, end, m->m_max_xattr_size, bad_ext);
>> + } else {
>> + m->m_max_xattr_size = MDS_MAX_XATTR_SIZE;
>> + }
>> bad_ext:
>> dout("mdsmap_decode m_enabled: %d, m_damaged: %d, m_num_laggy: %d\n",
>> !!m->m_enabled, !!m->m_damaged, m->m_num_laggy);
>> diff --git a/fs/ceph/xattr.c b/fs/ceph/xattr.c
>> index 8c2dc2c762a4..67f046dac35c 100644
>> --- a/fs/ceph/xattr.c
>> +++ b/fs/ceph/xattr.c
>> @@ -1086,7 +1086,7 @@ static int ceph_sync_setxattr(struct inode *inode, const char *name,
>> flags |= CEPH_XATTR_REMOVE;
>> }
>> - dout("setxattr value=%.*s\n", (int)size, value);
>> + dout("setxattr value size: %ld\n", size);
>> /* do request */
>> req = ceph_mdsc_create_request(mdsc, op, USE_AUTH_MDS);
>> @@ -1184,8 +1184,14 @@ int __ceph_setxattr(struct inode *inode, const char *name,
>> spin_lock(&ci->i_ceph_lock);
>> retry:
>> issued = __ceph_caps_issued(ci, NULL);
>> - if (ci->i_xattrs.version == 0 || !(issued & CEPH_CAP_XATTR_EXCL))
>> + required_blob_size = __get_required_blob_size(ci, name_len, val_len);
>> + if ((ci->i_xattrs.version == 0) || !(issued & CEPH_CAP_XATTR_EXCL) ||
>> + (required_blob_size >= mdsc->mdsmap->m_max_xattr_size)) {
>
> Shouldn't it be '>' instead ?
Ok, I'll fix that.
> We'd better always force to do a sync request with old ceph. Just check if the
> mdsmap_ev < 17. It's not safe to buffer it because it maybe discarded as your
> ceph PR does.
Right, that can be done. So, I can simply set the m_max_xattr_size to '0'
if mdsmap_ev < 17. Then, this 'if' condition will always be evaluated to
true because required_blob_size will be > 0. Does that sound OK?
Cheers,
--
Luís
> -- Xiubo
>
>> + dout("%s do sync setxattr: version: %llu size: %d max: %llu\n",
>> + __func__, ci->i_xattrs.version, required_blob_size,
>> + mdsc->mdsmap->m_max_xattr_size);
>> goto do_sync;
>> + }
>> if (!lock_snap_rwsem && !ci->i_head_snapc) {
>> lock_snap_rwsem = true;
>> @@ -1201,8 +1207,6 @@ int __ceph_setxattr(struct inode *inode, const char *name,
>> ceph_cap_string(issued));
>> __build_xattrs(inode);
>> - required_blob_size = __get_required_blob_size(ci, name_len, val_len);
>> -
>> if (!ci->i_xattrs.prealloc_blob ||
>> required_blob_size > ci->i_xattrs.prealloc_blob->alloc_len) {
>> struct ceph_buffer *blob;
>> diff --git a/include/linux/ceph/mdsmap.h b/include/linux/ceph/mdsmap.h
>> index 523fd0452856..4c3e0648dc27 100644
>> --- a/include/linux/ceph/mdsmap.h
>> +++ b/include/linux/ceph/mdsmap.h
>> @@ -25,6 +25,7 @@ struct ceph_mdsmap {
>> u32 m_session_timeout; /* seconds */
>> u32 m_session_autoclose; /* seconds */
>> u64 m_max_file_size;
>> + u64 m_max_xattr_size; /* maximum size for xattrs blob */
>> u32 m_max_mds; /* expected up:active mds number */
>> u32 m_num_active_mds; /* actual up:active mds number */
>> u32 possible_max_rank; /* possible max rank index */
>>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [RFC PATCH v3] ceph: prevent a client from exceeding the MDS maximum xattr size
2022-06-02 9:26 ` Luís Henriques
@ 2022-06-02 9:42 ` Xiubo Li
2022-06-02 10:28 ` Luís Henriques
0 siblings, 1 reply; 6+ messages in thread
From: Xiubo Li @ 2022-06-02 9:42 UTC (permalink / raw)
To: Luís Henriques
Cc: Jeff Layton, Ilya Dryomov, Gregory Farnum, ceph-devel,
linux-kernel
On 6/2/22 5:26 PM, Luís Henriques wrote:
> Xiubo Li <xiubli@redhat.com> writes:
>
>> On 6/2/22 12:29 AM, Luís Henriques wrote:
>>> The MDS tries to enforce a limit on the total key/values in extended
>>> attributes. However, this limit is enforced only if doing a synchronous
>>> operation (MDS_OP_SETXATTR) -- if we're buffering the xattrs, the MDS
>>> doesn't have a chance to enforce these limits.
>>>
>>> This patch adds support for decoding the xattrs maximum size setting that is
>>> distributed in the mdsmap. Then, when setting an xattr, the kernel client
>>> will revert to do a synchronous operation if that maximum size is exceeded.
>>>
>>> While there, fix a dout() that would trigger a printk warning:
>>>
>>> [ 98.718078] ------------[ cut here ]------------
>>> [ 98.719012] precision 65536 too large
>>> [ 98.719039] WARNING: CPU: 1 PID: 3755 at lib/vsprintf.c:2703 vsnprintf+0x5e3/0x600
>>> ...
>>>
>>> URL: https://tracker.ceph.com/issues/55725
>>> Signed-off-by: Luís Henriques <lhenriques@suse.de>
>>> ---
>>> fs/ceph/mdsmap.c | 27 +++++++++++++++++++++++----
>>> fs/ceph/xattr.c | 12 ++++++++----
>>> include/linux/ceph/mdsmap.h | 1 +
>>> 3 files changed, 32 insertions(+), 8 deletions(-)
>>>
>>> * Changes since v2
>>>
>>> Well, a lot has changed since v2! Now the xattr max value setting is
>>> obtained through the mdsmap, which needs to be decoded, and the feature
>>> that was used in the previous revision was dropped. The drawback is that
>>> the MDS isn't unable to know in advance if a client is aware of this xattr
>>> max value.
>>>
>>> * Changes since v1
>>>
>>> Added support for new feature bit to get the MDS max_xattr_pairs_size
>>> setting.
>>>
>>> Also note that this patch relies on a patch that hasn't been merged yet
>>> ("ceph: use correct index when encoding client supported features"),
>>> otherwise the new feature bit won't be correctly encoded.
>>>
>>> diff --git a/fs/ceph/mdsmap.c b/fs/ceph/mdsmap.c
>>> index 30387733765d..36b2bc18ca2a 100644
>>> --- a/fs/ceph/mdsmap.c
>>> +++ b/fs/ceph/mdsmap.c
>>> @@ -13,6 +13,12 @@
>>> #include "super.h"
>>> +/*
>>> + * Maximum size of xattrs the MDS can handle per inode by default. This
>>> + * includes the attribute name and 4+4 bytes for the key/value sizes.
>>> + */
>>> +#define MDS_MAX_XATTR_SIZE (1<<16) /* 64K */
>>> +
>>> #define CEPH_MDS_IS_READY(i, ignore_laggy) \
>>> (m->m_info[i].state > 0 && ignore_laggy ? true : !m->m_info[i].laggy)
>>> @@ -352,12 +358,10 @@ struct ceph_mdsmap *ceph_mdsmap_decode(void **p, void
>>> *end, bool msgr2)
>>> __decode_and_drop_type(p, end, u8, bad_ext);
>>> }
>>> if (mdsmap_ev >= 8) {
>>> - u32 name_len;
>>> /* enabled */
>>> ceph_decode_8_safe(p, end, m->m_enabled, bad_ext);
>>> - ceph_decode_32_safe(p, end, name_len, bad_ext);
>>> - ceph_decode_need(p, end, name_len, bad_ext);
>>> - *p += name_len;
>>> + /* fs_name */
>>> + ceph_decode_skip_string(p, end, bad_ext);
>>> }
>>> /* damaged */
>>> if (mdsmap_ev >= 9) {
>>> @@ -370,6 +374,21 @@ struct ceph_mdsmap *ceph_mdsmap_decode(void **p, void *end, bool msgr2)
>>> } else {
>>> m->m_damaged = false;
>>> }
>>> + if (mdsmap_ev >= 17) {
>>> + /* balancer */
>>> + ceph_decode_skip_string(p, end, bad_ext);
>>> + /* standby_count_wanted */
>>> + ceph_decode_skip_32(p, end, bad_ext);
>>> + /* old_max_mds */
>>> + ceph_decode_skip_32(p, end, bad_ext);
>>> + /* min_compat_client */
>>> + ceph_decode_skip_8(p, end, bad_ext);
>> This is incorrect.
>>
>> If mdsmap_ev == 15 the min_compat_client will be a feature_bitset_t instead of
>> int8_t.
> Hmm... can you point me at where that's done in the code? As usual, I'm
> confused with that code and simply can't see that.
>
> Also, if that happens only when mdsmap_ev == 15, then there's no problem
> because that branch is only taken if it's >= 17.
Yeah, so you should skip 32 or 32+64 bits instead here, just likes:
3536 /* version >= 3, feature bits */
3537 ceph_decode_32_safe(&p, end, len, bad);
3538 if (len) {
3539 ceph_decode_64_safe(&p, end, features, bad);
3540 p += len - sizeof(features);
3541 }
For the ceph code please see:
Please see https://github.com/ceph/ceph/blob/main/src/mds/MDSMap.cc#L925.
>>
>>> + /* required_client_features */
>>> + ceph_decode_skip_set(p, end, 64, bad_ext);
>>> + ceph_decode_64_safe(p, end, m->m_max_xattr_size, bad_ext);
>>> + } else {
>>> + m->m_max_xattr_size = MDS_MAX_XATTR_SIZE;
>>> + }
>>> bad_ext:
>>> dout("mdsmap_decode m_enabled: %d, m_damaged: %d, m_num_laggy: %d\n",
>>> !!m->m_enabled, !!m->m_damaged, m->m_num_laggy);
>>> diff --git a/fs/ceph/xattr.c b/fs/ceph/xattr.c
>>> index 8c2dc2c762a4..67f046dac35c 100644
>>> --- a/fs/ceph/xattr.c
>>> +++ b/fs/ceph/xattr.c
>>> @@ -1086,7 +1086,7 @@ static int ceph_sync_setxattr(struct inode *inode, const char *name,
>>> flags |= CEPH_XATTR_REMOVE;
>>> }
>>> - dout("setxattr value=%.*s\n", (int)size, value);
>>> + dout("setxattr value size: %ld\n", size);
>>> /* do request */
>>> req = ceph_mdsc_create_request(mdsc, op, USE_AUTH_MDS);
>>> @@ -1184,8 +1184,14 @@ int __ceph_setxattr(struct inode *inode, const char *name,
>>> spin_lock(&ci->i_ceph_lock);
>>> retry:
>>> issued = __ceph_caps_issued(ci, NULL);
>>> - if (ci->i_xattrs.version == 0 || !(issued & CEPH_CAP_XATTR_EXCL))
>>> + required_blob_size = __get_required_blob_size(ci, name_len, val_len);
>>> + if ((ci->i_xattrs.version == 0) || !(issued & CEPH_CAP_XATTR_EXCL) ||
>>> + (required_blob_size >= mdsc->mdsmap->m_max_xattr_size)) {
>> Shouldn't it be '>' instead ?
> Ok, I'll fix that.
>
>> We'd better always force to do a sync request with old ceph. Just check if the
>> mdsmap_ev < 17. It's not safe to buffer it because it maybe discarded as your
>> ceph PR does.
> Right, that can be done. So, I can simply set the m_max_xattr_size to '0'
> if mdsmap_ev < 17. Then, this 'if' condition will always be evaluated to
> true because required_blob_size will be > 0. Does that sound OK?
Yeah, sounds good.
-- Xiubo
>
> Cheers,
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [RFC PATCH v3] ceph: prevent a client from exceeding the MDS maximum xattr size
2022-06-02 9:42 ` Xiubo Li
@ 2022-06-02 10:28 ` Luís Henriques
2022-06-02 10:57 ` Xiubo Li
0 siblings, 1 reply; 6+ messages in thread
From: Luís Henriques @ 2022-06-02 10:28 UTC (permalink / raw)
To: Xiubo Li
Cc: Jeff Layton, Ilya Dryomov, Gregory Farnum, ceph-devel,
linux-kernel
Xiubo Li <xiubli@redhat.com> writes:
> On 6/2/22 5:26 PM, Luís Henriques wrote:
>> Xiubo Li <xiubli@redhat.com> writes:
>>
>>> On 6/2/22 12:29 AM, Luís Henriques wrote:
>>>> The MDS tries to enforce a limit on the total key/values in extended
>>>> attributes. However, this limit is enforced only if doing a synchronous
>>>> operation (MDS_OP_SETXATTR) -- if we're buffering the xattrs, the MDS
>>>> doesn't have a chance to enforce these limits.
>>>>
>>>> This patch adds support for decoding the xattrs maximum size setting that is
>>>> distributed in the mdsmap. Then, when setting an xattr, the kernel client
>>>> will revert to do a synchronous operation if that maximum size is exceeded.
>>>>
>>>> While there, fix a dout() that would trigger a printk warning:
>>>>
>>>> [ 98.718078] ------------[ cut here ]------------
>>>> [ 98.719012] precision 65536 too large
>>>> [ 98.719039] WARNING: CPU: 1 PID: 3755 at lib/vsprintf.c:2703 vsnprintf+0x5e3/0x600
>>>> ...
>>>>
>>>> URL: https://tracker.ceph.com/issues/55725
>>>> Signed-off-by: Luís Henriques <lhenriques@suse.de>
>>>> ---
>>>> fs/ceph/mdsmap.c | 27 +++++++++++++++++++++++----
>>>> fs/ceph/xattr.c | 12 ++++++++----
>>>> include/linux/ceph/mdsmap.h | 1 +
>>>> 3 files changed, 32 insertions(+), 8 deletions(-)
>>>>
>>>> * Changes since v2
>>>>
>>>> Well, a lot has changed since v2! Now the xattr max value setting is
>>>> obtained through the mdsmap, which needs to be decoded, and the feature
>>>> that was used in the previous revision was dropped. The drawback is that
>>>> the MDS isn't unable to know in advance if a client is aware of this xattr
>>>> max value.
>>>>
>>>> * Changes since v1
>>>>
>>>> Added support for new feature bit to get the MDS max_xattr_pairs_size
>>>> setting.
>>>>
>>>> Also note that this patch relies on a patch that hasn't been merged yet
>>>> ("ceph: use correct index when encoding client supported features"),
>>>> otherwise the new feature bit won't be correctly encoded.
>>>>
>>>> diff --git a/fs/ceph/mdsmap.c b/fs/ceph/mdsmap.c
>>>> index 30387733765d..36b2bc18ca2a 100644
>>>> --- a/fs/ceph/mdsmap.c
>>>> +++ b/fs/ceph/mdsmap.c
>>>> @@ -13,6 +13,12 @@
>>>> #include "super.h"
>>>> +/*
>>>> + * Maximum size of xattrs the MDS can handle per inode by default. This
>>>> + * includes the attribute name and 4+4 bytes for the key/value sizes.
>>>> + */
>>>> +#define MDS_MAX_XATTR_SIZE (1<<16) /* 64K */
>>>> +
>>>> #define CEPH_MDS_IS_READY(i, ignore_laggy) \
>>>> (m->m_info[i].state > 0 && ignore_laggy ? true : !m->m_info[i].laggy)
>>>> @@ -352,12 +358,10 @@ struct ceph_mdsmap *ceph_mdsmap_decode(void **p, void
>>>> *end, bool msgr2)
>>>> __decode_and_drop_type(p, end, u8, bad_ext);
>>>> }
>>>> if (mdsmap_ev >= 8) {
>>>> - u32 name_len;
>>>> /* enabled */
>>>> ceph_decode_8_safe(p, end, m->m_enabled, bad_ext);
>>>> - ceph_decode_32_safe(p, end, name_len, bad_ext);
>>>> - ceph_decode_need(p, end, name_len, bad_ext);
>>>> - *p += name_len;
>>>> + /* fs_name */
>>>> + ceph_decode_skip_string(p, end, bad_ext);
>>>> }
>>>> /* damaged */
>>>> if (mdsmap_ev >= 9) {
>>>> @@ -370,6 +374,21 @@ struct ceph_mdsmap *ceph_mdsmap_decode(void **p, void *end, bool msgr2)
>>>> } else {
>>>> m->m_damaged = false;
>>>> }
>>>> + if (mdsmap_ev >= 17) {
>>>> + /* balancer */
>>>> + ceph_decode_skip_string(p, end, bad_ext);
>>>> + /* standby_count_wanted */
>>>> + ceph_decode_skip_32(p, end, bad_ext);
>>>> + /* old_max_mds */
>>>> + ceph_decode_skip_32(p, end, bad_ext);
>>>> + /* min_compat_client */
>>>> + ceph_decode_skip_8(p, end, bad_ext);
>>> This is incorrect.
>>>
>>> If mdsmap_ev == 15 the min_compat_client will be a feature_bitset_t instead of
>>> int8_t.
>> Hmm... can you point me at where that's done in the code? As usual, I'm
>> confused with that code and simply can't see that.
>>
>> Also, if that happens only when mdsmap_ev == 15, then there's no problem
>> because that branch is only taken if it's >= 17.
>
> Yeah, so you should skip 32 or 32+64 bits instead here, just likes:
>
> 3536 /* version >= 3, feature bits */
> 3537 ceph_decode_32_safe(&p, end, len, bad);
> 3538 if (len) {
> 3539 ceph_decode_64_safe(&p, end, features, bad);
> 3540 p += len - sizeof(features);
> 3541 }
>
> For the ceph code please see:
>
> Please see https://github.com/ceph/ceph/blob/main/src/mds/MDSMap.cc#L925.
I still don't see what your saying. From what I understand, with <= 15 we
used to have 'min_compat_client', which is of type 'ceph_release_t',
defined in src/common/ceph_releases.h:
enum class ceph_release_t : std::uint8_t {
...
}
Then, starting with >= 16 the MDS ignores this 'min_compat_client' field
(but still encodes/decodes it), and it *adds* 'required_client_features',
which is a 'feature_bitset_t' and that is decoded immediately after (see
bellow, the ceph_decode_skip_set() call).
Cheers,
--
Luís
>>>
>>>> + /* required_client_features */
>>>> + ceph_decode_skip_set(p, end, 64, bad_ext);
>>>> + ceph_decode_64_safe(p, end, m->m_max_xattr_size, bad_ext);
>>>> + } else {
>>>> + m->m_max_xattr_size = MDS_MAX_XATTR_SIZE;
>>>> + }
>>>> bad_ext:
>>>> dout("mdsmap_decode m_enabled: %d, m_damaged: %d, m_num_laggy: %d\n",
>>>> !!m->m_enabled, !!m->m_damaged, m->m_num_laggy);
>>>> diff --git a/fs/ceph/xattr.c b/fs/ceph/xattr.c
>>>> index 8c2dc2c762a4..67f046dac35c 100644
>>>> --- a/fs/ceph/xattr.c
>>>> +++ b/fs/ceph/xattr.c
>>>> @@ -1086,7 +1086,7 @@ static int ceph_sync_setxattr(struct inode *inode, const char *name,
>>>> flags |= CEPH_XATTR_REMOVE;
>>>> }
>>>> - dout("setxattr value=%.*s\n", (int)size, value);
>>>> + dout("setxattr value size: %ld\n", size);
>>>> /* do request */
>>>> req = ceph_mdsc_create_request(mdsc, op, USE_AUTH_MDS);
>>>> @@ -1184,8 +1184,14 @@ int __ceph_setxattr(struct inode *inode, const char *name,
>>>> spin_lock(&ci->i_ceph_lock);
>>>> retry:
>>>> issued = __ceph_caps_issued(ci, NULL);
>>>> - if (ci->i_xattrs.version == 0 || !(issued & CEPH_CAP_XATTR_EXCL))
>>>> + required_blob_size = __get_required_blob_size(ci, name_len, val_len);
>>>> + if ((ci->i_xattrs.version == 0) || !(issued & CEPH_CAP_XATTR_EXCL) ||
>>>> + (required_blob_size >= mdsc->mdsmap->m_max_xattr_size)) {
>>> Shouldn't it be '>' instead ?
>> Ok, I'll fix that.
>>
>>> We'd better always force to do a sync request with old ceph. Just check if the
>>> mdsmap_ev < 17. It's not safe to buffer it because it maybe discarded as your
>>> ceph PR does.
>> Right, that can be done. So, I can simply set the m_max_xattr_size to '0'
>> if mdsmap_ev < 17. Then, this 'if' condition will always be evaluated to
>> true because required_blob_size will be > 0. Does that sound OK?
>
> Yeah, sounds good.
>
> -- Xiubo
>
>
>>
>> Cheers,
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [RFC PATCH v3] ceph: prevent a client from exceeding the MDS maximum xattr size
2022-06-02 10:28 ` Luís Henriques
@ 2022-06-02 10:57 ` Xiubo Li
0 siblings, 0 replies; 6+ messages in thread
From: Xiubo Li @ 2022-06-02 10:57 UTC (permalink / raw)
To: Luís Henriques
Cc: Jeff Layton, Ilya Dryomov, Gregory Farnum, ceph-devel,
linux-kernel
On 6/2/22 6:28 PM, Luís Henriques wrote:
> Xiubo Li <xiubli@redhat.com> writes:
>
>> On 6/2/22 5:26 PM, Luís Henriques wrote:
>>> Xiubo Li <xiubli@redhat.com> writes:
>>>
>>>> On 6/2/22 12:29 AM, Luís Henriques wrote:
>>>>> The MDS tries to enforce a limit on the total key/values in extended
>>>>> attributes. However, this limit is enforced only if doing a synchronous
>>>>> operation (MDS_OP_SETXATTR) -- if we're buffering the xattrs, the MDS
>>>>> doesn't have a chance to enforce these limits.
>>>>>
>>>>> This patch adds support for decoding the xattrs maximum size setting that is
>>>>> distributed in the mdsmap. Then, when setting an xattr, the kernel client
>>>>> will revert to do a synchronous operation if that maximum size is exceeded.
>>>>>
>>>>> While there, fix a dout() that would trigger a printk warning:
>>>>>
>>>>> [ 98.718078] ------------[ cut here ]------------
>>>>> [ 98.719012] precision 65536 too large
>>>>> [ 98.719039] WARNING: CPU: 1 PID: 3755 at lib/vsprintf.c:2703 vsnprintf+0x5e3/0x600
>>>>> ...
>>>>>
>>>>> URL: https://tracker.ceph.com/issues/55725
>>>>> Signed-off-by: Luís Henriques <lhenriques@suse.de>
>>>>> ---
>>>>> fs/ceph/mdsmap.c | 27 +++++++++++++++++++++++----
>>>>> fs/ceph/xattr.c | 12 ++++++++----
>>>>> include/linux/ceph/mdsmap.h | 1 +
>>>>> 3 files changed, 32 insertions(+), 8 deletions(-)
>>>>>
>>>>> * Changes since v2
>>>>>
>>>>> Well, a lot has changed since v2! Now the xattr max value setting is
>>>>> obtained through the mdsmap, which needs to be decoded, and the feature
>>>>> that was used in the previous revision was dropped. The drawback is that
>>>>> the MDS isn't unable to know in advance if a client is aware of this xattr
>>>>> max value.
>>>>>
>>>>> * Changes since v1
>>>>>
>>>>> Added support for new feature bit to get the MDS max_xattr_pairs_size
>>>>> setting.
>>>>>
>>>>> Also note that this patch relies on a patch that hasn't been merged yet
>>>>> ("ceph: use correct index when encoding client supported features"),
>>>>> otherwise the new feature bit won't be correctly encoded.
>>>>>
>>>>> diff --git a/fs/ceph/mdsmap.c b/fs/ceph/mdsmap.c
>>>>> index 30387733765d..36b2bc18ca2a 100644
>>>>> --- a/fs/ceph/mdsmap.c
>>>>> +++ b/fs/ceph/mdsmap.c
>>>>> @@ -13,6 +13,12 @@
>>>>> #include "super.h"
>>>>> +/*
>>>>> + * Maximum size of xattrs the MDS can handle per inode by default. This
>>>>> + * includes the attribute name and 4+4 bytes for the key/value sizes.
>>>>> + */
>>>>> +#define MDS_MAX_XATTR_SIZE (1<<16) /* 64K */
>>>>> +
>>>>> #define CEPH_MDS_IS_READY(i, ignore_laggy) \
>>>>> (m->m_info[i].state > 0 && ignore_laggy ? true : !m->m_info[i].laggy)
>>>>> @@ -352,12 +358,10 @@ struct ceph_mdsmap *ceph_mdsmap_decode(void **p, void
>>>>> *end, bool msgr2)
>>>>> __decode_and_drop_type(p, end, u8, bad_ext);
>>>>> }
>>>>> if (mdsmap_ev >= 8) {
>>>>> - u32 name_len;
>>>>> /* enabled */
>>>>> ceph_decode_8_safe(p, end, m->m_enabled, bad_ext);
>>>>> - ceph_decode_32_safe(p, end, name_len, bad_ext);
>>>>> - ceph_decode_need(p, end, name_len, bad_ext);
>>>>> - *p += name_len;
>>>>> + /* fs_name */
>>>>> + ceph_decode_skip_string(p, end, bad_ext);
>>>>> }
>>>>> /* damaged */
>>>>> if (mdsmap_ev >= 9) {
>>>>> @@ -370,6 +374,21 @@ struct ceph_mdsmap *ceph_mdsmap_decode(void **p, void *end, bool msgr2)
>>>>> } else {
>>>>> m->m_damaged = false;
>>>>> }
>>>>> + if (mdsmap_ev >= 17) {
>>>>> + /* balancer */
>>>>> + ceph_decode_skip_string(p, end, bad_ext);
>>>>> + /* standby_count_wanted */
>>>>> + ceph_decode_skip_32(p, end, bad_ext);
>>>>> + /* old_max_mds */
>>>>> + ceph_decode_skip_32(p, end, bad_ext);
>>>>> + /* min_compat_client */
>>>>> + ceph_decode_skip_8(p, end, bad_ext);
>>>> This is incorrect.
>>>>
>>>> If mdsmap_ev == 15 the min_compat_client will be a feature_bitset_t instead of
>>>> int8_t.
>>> Hmm... can you point me at where that's done in the code? As usual, I'm
>>> confused with that code and simply can't see that.
>>>
>>> Also, if that happens only when mdsmap_ev == 15, then there's no problem
>>> because that branch is only taken if it's >= 17.
>> Yeah, so you should skip 32 or 32+64 bits instead here, just likes:
>>
>> 3536 /* version >= 3, feature bits */
>> 3537 ceph_decode_32_safe(&p, end, len, bad);
>> 3538 if (len) {
>> 3539 ceph_decode_64_safe(&p, end, features, bad);
>> 3540 p += len - sizeof(features);
>> 3541 }
>>
>> For the ceph code please see:
>>
>> Please see https://github.com/ceph/ceph/blob/main/src/mds/MDSMap.cc#L925.
> I still don't see what your saying. From what I understand, with <= 15 we
> used to have 'min_compat_client', which is of type 'ceph_release_t',
> defined in src/common/ceph_releases.h:
>
> enum class ceph_release_t : std::uint8_t {
> ...
> }
Okay, you are right.
I miss reading that code.
-- Xiubo
> Then, starting with >= 16 the MDS ignores this 'min_compat_client' field
> (but still encodes/decodes it), and it *adds* 'required_client_features',
> which is a 'feature_bitset_t' and that is decoded immediately after (see
> bellow, the ceph_decode_skip_set() call).
>
> Cheers,
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2022-06-02 10:57 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-06-01 16:29 [RFC PATCH v3] ceph: prevent a client from exceeding the MDS maximum xattr size Luís Henriques
2022-06-02 2:33 ` Xiubo Li
2022-06-02 9:26 ` Luís Henriques
2022-06-02 9:42 ` Xiubo Li
2022-06-02 10:28 ` Luís Henriques
2022-06-02 10:57 ` Xiubo Li
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox