[PATCH AUTOSEL 6.9 01/28] usb: gadget: uvc: configfs: ensure guid to be valid before set

[PATCH AUTOSEL 6.9 01/28] usb: gadget: uvc: configfs: ensure guid to be valid before set

[Sasha Levin]

From: Michael Grzeschik <m.grzeschik@pengutronix.de>

[ Upstream commit f7a7f80ccc8df017507e2b1e1dd652361374d25b ]

When setting the guid via configfs it is possible to test if
its value is one of the kernel supported ones by calling
uvc_format_by_guid on it. If the result is NULL, we know the
guid is unsupported and can be ignored.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20240221-uvc-gadget-configfs-guid-v1-1-f0678ca62ebb@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/function/uvc_configfs.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/function/uvc_configfs.c b/drivers/usb/gadget/function/uvc_configfs.c
index a4377df612f51..6fac696ea8463 100644
--- a/drivers/usb/gadget/function/uvc_configfs.c
+++ b/drivers/usb/gadget/function/uvc_configfs.c
@@ -13,6 +13,7 @@
 #include "uvc_configfs.h"
 
 #include <linux/sort.h>
+#include <linux/usb/uvc.h>
 #include <linux/usb/video.h>
 
 /* -----------------------------------------------------------------------------
@@ -2260,6 +2261,8 @@ static ssize_t uvcg_uncompressed_guid_format_store(struct config_item *item,
 	struct f_uvc_opts *opts;
 	struct config_item *opts_item;
 	struct mutex *su_mutex = &ch->fmt.group.cg_subsys->su_mutex;
+	const struct uvc_format_desc *format;
+	u8 tmpguidFormat[sizeof(ch->desc.guidFormat)];
 	int ret;
 
 	mutex_lock(su_mutex); /* for navigating configfs hierarchy */
@@ -2273,7 +2276,16 @@ static ssize_t uvcg_uncompressed_guid_format_store(struct config_item *item,
 		goto end;
 	}
 
-	memcpy(ch->desc.guidFormat, page,
+	memcpy(tmpguidFormat, page,
+	       min(sizeof(tmpguidFormat), len));
+
+	format = uvc_format_by_guid(tmpguidFormat);
+	if (!format) {
+		ret = -EINVAL;
+		goto end;
+	}
+
+	memcpy(ch->desc.guidFormat, tmpguidFormat,
 	       min(sizeof(ch->desc.guidFormat), len));
 	ret = sizeof(ch->desc.guidFormat);
 
-- 
2.43.0

[PATCH AUTOSEL 6.9 02/28] f2fs: fix to detect inconsistent nat entry during truncation

[Sasha Levin]

From: Chao Yu <chao@kernel.org>

[ Upstream commit 92c556ed6318e13c16746495a8d4513129eb9b0f ]

As Roman Smirnov reported as below:

"
There is a possible bug in f2fs_truncate_inode_blocks():

    if (err < 0 && err != -ENOENT)
    			goto fail;
        ...
        offset[1] = 0;
        offset[0]++;
        nofs += err;

If err = -ENOENT then nofs will sum with an error code,
which is strange behaviour. Also if nofs < ENOENT this will
cause an overflow. err will be equal to -ENOENT with the
following call stack:

truncate_nodes()
  f2fs_get_node_page()
     __get_node_page()
        read_node_page()
"

If nat is corrupted, truncate_nodes() may return -ENOENT, and
f2fs_truncate_inode_blocks() doesn't handle such error correctly,
fix it.

Reported-by: Roman Smirnov <r.smirnov@omp.ru>
Closes: https://lore.kernel.org/linux-f2fs-devel/085b27fd2b364a3c8c3a9ca77363e246@omp.ru
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/node.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/fs/f2fs/node.c b/fs/f2fs/node.c
index b3de6d6cdb021..bb57bbaff7b4f 100644
--- a/fs/f2fs/node.c
+++ b/fs/f2fs/node.c
@@ -1187,7 +1187,17 @@ int f2fs_truncate_inode_blocks(struct inode *inode, pgoff_t from)
 		default:
 			BUG();
 		}
-		if (err < 0 && err != -ENOENT)
+		if (err == -ENOENT) {
+			set_sbi_flag(F2FS_P_SB(page), SBI_NEED_FSCK);
+			f2fs_handle_error(sbi, ERROR_INVALID_BLKADDR);
+			f2fs_err_ratelimited(sbi,
+				"truncate node fail, ino:%lu, nid:%u, "
+				"offset[0]:%d, offset[1]:%d, nofs:%d",
+				inode->i_ino, dn.nid, offset[0],
+				offset[1], nofs);
+			err = 0;
+		}
+		if (err < 0)
 			goto fail;
 		if (offset[1] == 0 &&
 				ri->i_nid[offset[0] - NODE_DIR1_BLOCK]) {
-- 
2.43.0

[PATCH AUTOSEL 6.9 03/28] f2fs: remove clear SB_INLINECRYPT flag in default_options

[Sasha Levin]

From: Yunlei He <heyunlei@oppo.com>

[ Upstream commit ac5eecf481c29942eb9a862e758c0c8b68090c33 ]

In f2fs_remount, SB_INLINECRYPT flag will be clear and re-set.
If create new file or open file during this gap, these files
will not use inlinecrypt. Worse case, it may lead to data
corruption if wrappedkey_v0 is enable.

Thread A:                               Thread B:

-f2fs_remount				-f2fs_file_open or f2fs_new_inode
  -default_options
	<- clear SB_INLINECRYPT flag

                                          -fscrypt_select_encryption_impl

  -parse_options
	<- set SB_INLINECRYPT again

Signed-off-by: Yunlei He <heyunlei@oppo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/super.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index a4bc26dfdb1af..e4c795a711f0f 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -2132,8 +2132,6 @@ static void default_options(struct f2fs_sb_info *sbi, bool remount)
 	F2FS_OPTION(sbi).memory_mode = MEMORY_MODE_NORMAL;
 	F2FS_OPTION(sbi).errors = MOUNT_ERRORS_CONTINUE;
 
-	sbi->sb->s_flags &= ~SB_INLINECRYPT;
-
 	set_opt(sbi, INLINE_XATTR);
 	set_opt(sbi, INLINE_DATA);
 	set_opt(sbi, INLINE_DENTRY);
-- 
2.43.0

[PATCH AUTOSEL 6.9 04/28] usb: typec: ucsi_glink: rework quirks implementation

[Sasha Levin]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit 3f81cf54c1889eeecbb8d9188f5f2f597622170e ]

In preparation to adding more quirks, extract quirks to the static
variables and reference them through match->data. Otherwise adding
more quirks will add the table really cumbersome.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240329-qcom-ucsi-fixes-v2-8-0f5d37ed04db@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/typec/ucsi/ucsi_glink.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/typec/ucsi/ucsi_glink.c b/drivers/usb/typec/ucsi/ucsi_glink.c
index ce08eb33e5bec..0e6f837f6c31b 100644
--- a/drivers/usb/typec/ucsi/ucsi_glink.c
+++ b/drivers/usb/typec/ucsi/ucsi_glink.c
@@ -311,12 +311,14 @@ static void pmic_glink_ucsi_destroy(void *data)
 	mutex_unlock(&ucsi->lock);
 }
 
+static unsigned long quirk_sc8180x = UCSI_NO_PARTNER_PDOS;
+
 static const struct of_device_id pmic_glink_ucsi_of_quirks[] = {
-	{ .compatible = "qcom,qcm6490-pmic-glink", .data = (void *)UCSI_NO_PARTNER_PDOS, },
-	{ .compatible = "qcom,sc8180x-pmic-glink", .data = (void *)UCSI_NO_PARTNER_PDOS, },
-	{ .compatible = "qcom,sc8280xp-pmic-glink", .data = (void *)UCSI_NO_PARTNER_PDOS, },
-	{ .compatible = "qcom,sm8350-pmic-glink", .data = (void *)UCSI_NO_PARTNER_PDOS, },
-	{ .compatible = "qcom,sm8550-pmic-glink", .data = (void *)UCSI_NO_PARTNER_PDOS, },
+	{ .compatible = "qcom,qcm6490-pmic-glink", .data = &quirk_sc8180x, },
+	{ .compatible = "qcom,sc8180x-pmic-glink", .data = &quirk_sc8180x, },
+	{ .compatible = "qcom,sc8280xp-pmic-glink", .data = &quirk_sc8180x, },
+	{ .compatible = "qcom,sm8350-pmic-glink", .data = &quirk_sc8180x, },
+	{ .compatible = "qcom,sm8550-pmic-glink", .data = &quirk_sc8180x, },
 	{}
 };
 
@@ -354,7 +356,7 @@ static int pmic_glink_ucsi_probe(struct auxiliary_device *adev,
 
 	match = of_match_device(pmic_glink_ucsi_of_quirks, dev->parent);
 	if (match)
-		ucsi->ucsi->quirks = (unsigned long)match->data;
+		ucsi->ucsi->quirks = *(unsigned long *)match->data;
 
 	ucsi_set_drvdata(ucsi->ucsi, ucsi);
 
-- 
2.43.0

[PATCH AUTOSEL 6.9 05/28] usb: misc: uss720: check for incompatible versions of the Belkin F5U002

[Sasha Levin]

From: Alex Henrie <alexhenrie24@gmail.com>

[ Upstream commit 3295f1b866bfbcabd625511968e8a5c541f9ab32 ]

The incompatible device in my possession has a sticker that says
"F5U002 Rev 2" and "P80453-B", and lsusb identifies it as
"050d:0002 Belkin Components IEEE-1284 Controller". There is a bug
report from 2007 from Michael Trausch who was seeing the exact same
errors that I saw in 2024 trying to use this cable.

Link: https://lore.kernel.org/all/46DE5830.9060401@trausch.us/
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Link: https://lore.kernel.org/r/20240326150723.99939-5-alexhenrie24@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/misc/uss720.c | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c
index b00d92db5dfd1..eb5a8e0d9e2d6 100644
--- a/drivers/usb/misc/uss720.c
+++ b/drivers/usb/misc/uss720.c
@@ -677,7 +677,7 @@ static int uss720_probe(struct usb_interface *intf,
 	struct parport_uss720_private *priv;
 	struct parport *pp;
 	unsigned char reg;
-	int i;
+	int ret;
 
 	dev_dbg(&intf->dev, "probe: vendor id 0x%x, device id 0x%x\n",
 		le16_to_cpu(usbdev->descriptor.idVendor),
@@ -688,8 +688,8 @@ static int uss720_probe(struct usb_interface *intf,
 		usb_put_dev(usbdev);
 		return -ENODEV;
 	}
-	i = usb_set_interface(usbdev, intf->altsetting->desc.bInterfaceNumber, 2);
-	dev_dbg(&intf->dev, "set interface result %d\n", i);
+	ret = usb_set_interface(usbdev, intf->altsetting->desc.bInterfaceNumber, 2);
+	dev_dbg(&intf->dev, "set interface result %d\n", ret);
 
 	interface = intf->cur_altsetting;
 
@@ -725,12 +725,18 @@ static int uss720_probe(struct usb_interface *intf,
 	set_1284_register(pp, 7, 0x00, GFP_KERNEL);
 	set_1284_register(pp, 6, 0x30, GFP_KERNEL);  /* PS/2 mode */
 	set_1284_register(pp, 2, 0x0c, GFP_KERNEL);
-	/* debugging */
-	get_1284_register(pp, 0, &reg, GFP_KERNEL);
+
+	/* The Belkin F5U002 Rev 2 P80453-B USB parallel port adapter shares the
+	 * device ID 050d:0002 with some other device that works with this
+	 * driver, but it itself does not. Detect and handle the bad cable
+	 * here. */
+	ret = get_1284_register(pp, 0, &reg, GFP_KERNEL);
 	dev_dbg(&intf->dev, "reg: %7ph\n", priv->reg);
+	if (ret < 0)
+		return ret;
 
-	i = usb_find_last_int_in_endpoint(interface, &epd);
-	if (!i) {
+	ret = usb_find_last_int_in_endpoint(interface, &epd);
+	if (!ret) {
 		dev_dbg(&intf->dev, "epaddr %d interval %d\n",
 				epd->bEndpointAddress, epd->bInterval);
 	}
-- 
2.43.0

[PATCH AUTOSEL 6.9 06/28] Avoid hw_desc array overrun in dw-axi-dmac

[Sasha Levin]

From: Joao Pinto <Joao.Pinto@synopsys.com>

[ Upstream commit 333e11bf47fa8d477db90e2900b1ed3c9ae9b697 ]

I have a use case where nr_buffers = 3 and in which each descriptor is composed by 3
segments, resulting in the DMA channel descs_allocated to be 9. Since axi_desc_put()
handles the hw_desc considering the descs_allocated, this scenario would result in a
kernel panic (hw_desc array will be overrun).

To fix this, the proposal is to add a new member to the axi_dma_desc structure,
where we keep the number of allocated hw_descs (axi_desc_alloc()) and use it in
axi_desc_put() to handle the hw_desc array correctly.

Additionally I propose to remove the axi_chan_start_first_queued() call after completing
the transfer, since it was identified that unbalance can occur (started descriptors can
be interrupted and transfer ignored due to DMA channel not being enabled).

Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Link: https://lore.kernel.org/r/1711536564-12919-1-git-send-email-jpinto@synopsys.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c | 6 ++----
 drivers/dma/dw-axi-dmac/dw-axi-dmac.h          | 1 +
 2 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
index a86a81ff0caa6..321446fdddbd7 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
@@ -302,6 +302,7 @@ static struct axi_dma_desc *axi_desc_alloc(u32 num)
 		kfree(desc);
 		return NULL;
 	}
+	desc->nr_hw_descs = num;
 
 	return desc;
 }
@@ -328,7 +329,7 @@ static struct axi_dma_lli *axi_desc_get(struct axi_dma_chan *chan,
 static void axi_desc_put(struct axi_dma_desc *desc)
 {
 	struct axi_dma_chan *chan = desc->chan;
-	int count = atomic_read(&chan->descs_allocated);
+	int count = desc->nr_hw_descs;
 	struct axi_dma_hw_desc *hw_desc;
 	int descs_put;
 
@@ -1139,9 +1140,6 @@ static void axi_chan_block_xfer_complete(struct axi_dma_chan *chan)
 		/* Remove the completed descriptor from issued list before completing */
 		list_del(&vd->node);
 		vchan_cookie_complete(vd);
-
-		/* Submit queued descriptors after processing the completed ones */
-		axi_chan_start_first_queued(chan);
 	}
 
 out:
diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
index 454904d996540..ac571b413b21c 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
@@ -104,6 +104,7 @@ struct axi_dma_desc {
 	u32				completed_blocks;
 	u32				length;
 	u32				period_len;
+	u32				nr_hw_descs;
 };
 
 struct axi_dma_chan_config {
-- 
2.43.0

[PATCH AUTOSEL 6.9 07/28] usb: dwc3: pci: Don't set "linux,phy_charger_detect" property on Lenovo Yoga Tab2 1380

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 0fb782b5d5c462b2518b3b4fe7d652114c28d613 ]

The Lenovo Yoga Tablet 2 Pro 1380 model is the exception to the rule that
devices which use the Crystal Cove PMIC without using ACPI for battery and
AC power_supply class support use the USB-phy for charger detection.

Unlike the Lenovo Yoga Tablet 2 830 / 1050 models this model has an extra
LC824206XA Micro USB switch which does the charger detection.

Add a DMI quirk to not set the "linux,phy_charger_detect" property on
the 1380 model. This quirk matches on the BIOS version to differentiate
the 1380 model from the 830 and 1050 models which otherwise have
the same DMI strings.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240406140127.17885-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/dwc3/dwc3-pci.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 497deed38c0c1..9ef821ca2fc71 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -8,6 +8,7 @@
  *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
  */
 
+#include <linux/dmi.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
@@ -220,6 +221,7 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc,
 
 		if (pdev->device == PCI_DEVICE_ID_INTEL_BYT) {
 			struct gpio_desc *gpio;
+			const char *bios_ver;
 			int ret;
 
 			/* On BYT the FW does not always enable the refclock */
@@ -277,8 +279,12 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc,
 			 * detection. These can be identified by them _not_
 			 * using the standard ACPI battery and ac drivers.
 			 */
+			bios_ver = dmi_get_system_info(DMI_BIOS_VERSION);
 			if (acpi_dev_present("INT33FD", "1", 2) &&
-			    acpi_quirk_skip_acpi_ac_and_battery()) {
+			    acpi_quirk_skip_acpi_ac_and_battery() &&
+			    /* Lenovo Yoga Tablet 2 Pro 1380 uses LC824206XA instead */
+			    !(bios_ver &&
+			      strstarts(bios_ver, "BLADE_21.X64.0005.R00.1504101516"))) {
 				dev_info(&pdev->dev, "Using TUSB1211 phy for charger detection\n");
 				swnode = &dwc3_pci_intel_phy_charger_detect_swnode;
 			}
-- 
2.43.0

[PATCH AUTOSEL 6.9 08/28] usb: typec: ucsi_glink: drop special handling for CCI_BUSY

[Sasha Levin]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit 1a395af9d53c6240bf7799abc43b4dc292ca9dd0 ]

Newer Qualcomm platforms (sm8450+) successfully handle busy state and
send the Command Completion after sending the Busy state. Older devices
have firmware bug and can not continue after sending the CCI_BUSY state,
but the command that leads to CCI_BUSY is already forbidden by the
NO_PARTNER_PDOS quirk.

Follow other UCSI glue drivers and drop special handling for CCI_BUSY
event. Let the UCSI core properly handle this state.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240408-qcom-ucsi-fixes-bis-v1-3-716c145ca4b1@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/typec/ucsi/ucsi_glink.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/typec/ucsi/ucsi_glink.c b/drivers/usb/typec/ucsi/ucsi_glink.c
index 0e6f837f6c31b..1d0e2d87e9b31 100644
--- a/drivers/usb/typec/ucsi/ucsi_glink.c
+++ b/drivers/usb/typec/ucsi/ucsi_glink.c
@@ -176,7 +176,8 @@ static int pmic_glink_ucsi_sync_write(struct ucsi *__ucsi, unsigned int offset,
 	left = wait_for_completion_timeout(&ucsi->sync_ack, 5 * HZ);
 	if (!left) {
 		dev_err(ucsi->dev, "timeout waiting for UCSI sync write response\n");
-		ret = -ETIMEDOUT;
+		/* return 0 here and let core UCSI code handle the CCI_BUSY */
+		ret = 0;
 	} else if (ucsi->sync_val) {
 		dev_err(ucsi->dev, "sync write returned: %d\n", ucsi->sync_val);
 	}
@@ -243,10 +244,7 @@ static void pmic_glink_ucsi_notify(struct work_struct *work)
 		ucsi_connector_change(ucsi->ucsi, con_num);
 	}
 
-	if (ucsi->sync_pending && cci & UCSI_CCI_BUSY) {
-		ucsi->sync_val = -EBUSY;
-		complete(&ucsi->sync_ack);
-	} else if (ucsi->sync_pending &&
+	if (ucsi->sync_pending &&
 		   (cci & (UCSI_CCI_ACK_COMPLETE | UCSI_CCI_COMMAND_COMPLETE))) {
 		complete(&ucsi->sync_ack);
 	}
-- 
2.43.0

[PATCH AUTOSEL 6.9 09/28] udf: udftime: prevent overflow in udf_disk_stamp_to_time()

[Sasha Levin]

From: Roman Smirnov <r.smirnov@omp.ru>

[ Upstream commit 3b84adf460381169c085e4bc09e7b57e9e16db0a ]

An overflow can occur in a situation where src.centiseconds
takes the value of 255. This situation is unlikely, but there
is no validation check anywere in the code.

Found by Linux Verification Center (linuxtesting.org) with Svace.

Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Roman Smirnov <r.smirnov@omp.ru>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240327132755.13945-1-r.smirnov@omp.ru>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/udf/udftime.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/fs/udf/udftime.c b/fs/udf/udftime.c
index 758163af39c26..78ecc633606fb 100644
--- a/fs/udf/udftime.c
+++ b/fs/udf/udftime.c
@@ -46,13 +46,18 @@ udf_disk_stamp_to_time(struct timespec64 *dest, struct timestamp src)
 	dest->tv_sec = mktime64(year, src.month, src.day, src.hour, src.minute,
 			src.second);
 	dest->tv_sec -= offset * 60;
-	dest->tv_nsec = 1000 * (src.centiseconds * 10000 +
-			src.hundredsOfMicroseconds * 100 + src.microseconds);
+
 	/*
 	 * Sanitize nanosecond field since reportedly some filesystems are
 	 * recorded with bogus sub-second values.
 	 */
-	dest->tv_nsec %= NSEC_PER_SEC;
+	if (src.centiseconds < 100 && src.hundredsOfMicroseconds < 100 &&
+	    src.microseconds < 100) {
+		dest->tv_nsec = 1000 * (src.centiseconds * 10000 +
+			src.hundredsOfMicroseconds * 100 + src.microseconds);
+	} else {
+		dest->tv_nsec = 0;
+	}
 }
 
 void
-- 
2.43.0

[PATCH AUTOSEL 6.9 10/28] PCI/PM: Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports

[Sasha Levin]

From: Mario Limonciello <mario.limonciello@amd.com>

[ Upstream commit 256df20c590bf0e4d63ac69330cf23faddac3e08 ]

Hewlett-Packard HP Pavilion 17 Notebook PC/1972 is an Intel Ivy Bridge
system with a muxless AMD Radeon dGPU.  Attempting to use the dGPU fails
with the following sequence:

  ACPI Error: Aborting method \AMD3._ON due to previous error (AE_AML_LOOP_TIMEOUT) (20230628/psparse-529)
  radeon 0000:01:00.0: not ready 1023ms after resume; waiting
  radeon 0000:01:00.0: not ready 2047ms after resume; waiting
  radeon 0000:01:00.0: not ready 4095ms after resume; waiting
  radeon 0000:01:00.0: not ready 8191ms after resume; waiting
  radeon 0000:01:00.0: not ready 16383ms after resume; waiting
  radeon 0000:01:00.0: not ready 32767ms after resume; waiting
  radeon 0000:01:00.0: not ready 65535ms after resume; giving up
  radeon 0000:01:00.0: Unable to change power state from D3cold to D0, device inaccessible

The issue is that the Root Port the dGPU is connected to can't handle the
transition from D3cold to D0 so the dGPU can't properly exit runtime PM.

The existing logic in pci_bridge_d3_possible() checks for systems that are
newer than 2015 to decide that D3 is safe.  This would nominally work for
an Ivy Bridge system (which was discontinued in 2015), but this system
appears to have continued to receive BIOS updates until 2017 and so this
existing logic doesn't appropriately capture it.

Add the system to bridge_d3_blacklist to prevent D3cold from being used.

Link: https://lore.kernel.org/r/20240307163709.323-1-mario.limonciello@amd.com
Reported-by: Eric Heintzmann <heintzmann.eric@free.fr>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3229
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Eric Heintzmann <heintzmann.eric@free.fr>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/pci.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index e5f243dd42884..4028717ec2cea 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -2962,6 +2962,18 @@ static const struct dmi_system_id bridge_d3_blacklist[] = {
 			DMI_MATCH(DMI_BOARD_VERSION, "Continental Z2"),
 		},
 	},
+	{
+		/*
+		 * Changing power state of root port dGPU is connected fails
+		 * https://gitlab.freedesktop.org/drm/amd/-/issues/3229
+		 */
+		.ident = "Hewlett-Packard HP Pavilion 17 Notebook PC/1972",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_BOARD_NAME, "1972"),
+			DMI_MATCH(DMI_BOARD_VERSION, "95.33"),
+		},
+	},
 #endif
 	{ }
 };
-- 
2.43.0

[PATCH AUTOSEL 6.9 11/28] f2fs: don't set RO when shutting down f2fs

[Sasha Levin]

From: Jaegeuk Kim <jaegeuk@kernel.org>

[ Upstream commit 3bdb7f161697e2d5123b89fe1778ef17a44858e7 ]

Shutdown does not check the error of thaw_super due to readonly, which
causes a deadlock like below.

f2fs_ioc_shutdown(F2FS_GOING_DOWN_FULLSYNC)        issue_discard_thread
 - bdev_freeze
  - freeze_super
 - f2fs_stop_checkpoint()
  - f2fs_handle_critical_error                     - sb_start_write
    - set RO                                         - waiting
 - bdev_thaw
  - thaw_super_locked
    - return -EINVAL, if sb_rdonly()
 - f2fs_stop_discard_thread
  -> wait for kthread_stop(discard_thread);

Reported-by: "Light Hsieh (謝明燈)" <Light.Hsieh@mediatek.com>
Reviewed-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/super.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index e4c795a711f0f..2f75a7dfc311d 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -4129,9 +4129,15 @@ void f2fs_handle_critical_error(struct f2fs_sb_info *sbi, unsigned char reason,
 	if (shutdown)
 		set_sbi_flag(sbi, SBI_IS_SHUTDOWN);
 
-	/* continue filesystem operators if errors=continue */
-	if (continue_fs || f2fs_readonly(sb))
+	/*
+	 * Continue filesystem operators if errors=continue. Should not set
+	 * RO by shutdown, since RO bypasses thaw_super which can hang the
+	 * system.
+	 */
+	if (continue_fs || f2fs_readonly(sb) || shutdown) {
+		f2fs_warn(sbi, "Stopped filesystem due to reason: %d", reason);
 		return;
+	}
 
 	f2fs_warn(sbi, "Remounting filesystem read-only");
 	/*
-- 
2.43.0

[PATCH AUTOSEL 6.9 12/28] MIPS: Octeon: Add PCIe link status check

[Sasha Levin]

From: Songyang Li <leesongyang@outlook.com>

[ Upstream commit 29b83a64df3b42c88c0338696feb6fdcd7f1f3b7 ]

The standard PCIe configuration read-write interface is used to
access the configuration space of the peripheral PCIe devices
of the mips processor after the PCIe link surprise down, it can
generate kernel panic caused by "Data bus error". So it is
necessary to add PCIe link status check for system protection.
When the PCIe link is down or in training, assigning a value
of 0 to the configuration address can prevent read-write behavior
to the configuration space of peripheral PCIe devices, thereby
preventing kernel panic.

Signed-off-by: Songyang Li <leesongyang@outlook.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/pci/pcie-octeon.c | 6 ++++++
 1 file changed, 6 insertions(+)
 mode change 100644 => 100755 arch/mips/pci/pcie-octeon.c

diff --git a/arch/mips/pci/pcie-octeon.c b/arch/mips/pci/pcie-octeon.c
old mode 100644
new mode 100755
index 2583e318e8c6b..b080c7c6cc463
--- a/arch/mips/pci/pcie-octeon.c
+++ b/arch/mips/pci/pcie-octeon.c
@@ -230,12 +230,18 @@ static inline uint64_t __cvmx_pcie_build_config_addr(int pcie_port, int bus,
 {
 	union cvmx_pcie_address pcie_addr;
 	union cvmx_pciercx_cfg006 pciercx_cfg006;
+	union cvmx_pciercx_cfg032 pciercx_cfg032;
 
 	pciercx_cfg006.u32 =
 	    cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG006(pcie_port));
 	if ((bus <= pciercx_cfg006.s.pbnum) && (dev != 0))
 		return 0;
 
+	pciercx_cfg032.u32 =
+		cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG032(pcie_port));
+	if ((pciercx_cfg032.s.dlla == 0) || (pciercx_cfg032.s.lt == 1))
+		return 0;
+
 	pcie_addr.u64 = 0;
 	pcie_addr.config.upper = 2;
 	pcie_addr.config.io = 1;
-- 
2.43.0

[PATCH AUTOSEL 6.9 13/28] serial: imx: Introduce timeout when waiting on transmitter empty

[Sasha Levin]

From: Esben Haabendal <esben@geanix.com>

[ Upstream commit e533e4c62e9993e62e947ae9bbec34e4c7ae81c2 ]

By waiting at most 1 second for USR2_TXDC to be set, we avoid a potential
deadlock.

In case of the timeout, there is not much we can do, so we simply ignore
the transmitter state and optimistically try to continue.

Signed-off-by: Esben Haabendal <esben@geanix.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/919647898c337a46604edcabaf13d42d80c0915d.1712837613.git.esben@geanix.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/imx.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index e148132506161..09c1678ddfd49 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -26,6 +26,7 @@
 #include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/dma-mapping.h>
 
 #include <asm/irq.h>
@@ -2010,7 +2011,7 @@ imx_uart_console_write(struct console *co, const char *s, unsigned int count)
 	struct imx_port *sport = imx_uart_ports[co->index];
 	struct imx_port_ucrs old_ucr;
 	unsigned long flags;
-	unsigned int ucr1;
+	unsigned int ucr1, usr2;
 	int locked = 1;
 
 	if (sport->port.sysrq)
@@ -2041,8 +2042,8 @@ imx_uart_console_write(struct console *co, const char *s, unsigned int count)
 	 *	Finally, wait for transmitter to become empty
 	 *	and restore UCR1/2/3
 	 */
-	while (!(imx_uart_readl(sport, USR2) & USR2_TXDC));
-
+	read_poll_timeout_atomic(imx_uart_readl, usr2, usr2 & USR2_TXDC,
+				 0, USEC_PER_SEC, false, sport, USR2);
 	imx_uart_ucrs_restore(sport, &old_ucr);
 
 	if (locked)
-- 
2.43.0

[PATCH AUTOSEL 6.9 14/28] serial: exar: adding missing CTI and Exar PCI ids

[Sasha Levin]

From: Parker Newman <pnewman@connecttech.com>

[ Upstream commit b86ae40ffcf5a16b9569b1016da4a08c4f352ca2 ]

- Added Connect Tech and Exar IDs not already in pci_ids.h

Signed-off-by: Parker Newman <pnewman@connecttech.com>
Link: https://lore.kernel.org/r/7c3d8e795a864dd9b0a00353b722060dc27c4e09.1713270624.git.pnewman@connecttech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/8250/8250_exar.c | 42 +++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 0440df7de1ed7..4d1e07343d0bb 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -46,8 +46,50 @@
 #define PCI_DEVICE_ID_COMMTECH_4228PCIE		0x0021
 #define PCI_DEVICE_ID_COMMTECH_4222PCIE		0x0022
 
+#define PCI_VENDOR_ID_CONNECT_TECH				0x12c4
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_SP_OPTO        0x0340
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_SP_OPTO_A      0x0341
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_SP_OPTO_B      0x0342
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_XPRS           0x0350
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_XPRS_A         0x0351
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_XPRS_B         0x0352
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_XPRS           0x0353
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_16_XPRS_A        0x0354
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_16_XPRS_B        0x0355
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_XPRS_OPTO      0x0360
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_XPRS_OPTO_A    0x0361
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_XPRS_OPTO_B    0x0362
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_SP             0x0370
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_SP_232         0x0371
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_SP_485         0x0372
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_4_SP           0x0373
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_6_2_SP           0x0374
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_6_SP           0x0375
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_SP_232_NS      0x0376
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_XP_OPTO_LEFT   0x0380
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_XP_OPTO_RIGHT  0x0381
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_XP_OPTO        0x0382
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_4_XPRS_OPTO    0x0392
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_XPRS_LP        0x03A0
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_XPRS_LP_232    0x03A1
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_XPRS_LP_485    0x03A2
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_XPRS_LP_232_NS 0x03A3
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCIE_XEG001               0x0602
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCIE_XR35X_BASE           0x1000
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCIE_XR35X_2              0x1002
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCIE_XR35X_4              0x1004
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCIE_XR35X_8              0x1008
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCIE_XR35X_12             0x100C
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCIE_XR35X_16             0x1010
+#define PCI_DEVICE_ID_CONNECT_TECH_PCI_XR79X_12_XIG00X          0x110c
+#define PCI_DEVICE_ID_CONNECT_TECH_PCI_XR79X_12_XIG01X          0x110d
+#define PCI_DEVICE_ID_CONNECT_TECH_PCI_XR79X_16                 0x1110
+
 #define PCI_DEVICE_ID_EXAR_XR17V4358		0x4358
 #define PCI_DEVICE_ID_EXAR_XR17V8358		0x8358
+#define PCI_DEVICE_ID_EXAR_XR17V252		0x0252
+#define PCI_DEVICE_ID_EXAR_XR17V254		0x0254
+#define PCI_DEVICE_ID_EXAR_XR17V258		0x0258
 
 #define PCI_SUBDEVICE_ID_USR_2980		0x0128
 #define PCI_SUBDEVICE_ID_USR_2981		0x0129
-- 
2.43.0

[PATCH AUTOSEL 6.9 15/28] usb: gadget: function: Remove usage of the deprecated ida_simple_xx() API

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 920e7522e3bab5ebc2fb0cc1a034f4470c87fa97 ]

ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().

Note that the upper limit of ida_simple_get() is exclusive, but the one of
ida_alloc_max() is inclusive. So a -1 has been added when needed.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/7cd361e2b377a5373968fa7deee4169229992a1e.1713107386.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/function/f_hid.c     | 6 +++---
 drivers/usb/gadget/function/f_printer.c | 6 +++---
 drivers/usb/gadget/function/rndis.c     | 4 ++--
 3 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/gadget/function/f_hid.c b/drivers/usb/gadget/function/f_hid.c
index 3c8a9dd585c09..2db01e03bfbf0 100644
--- a/drivers/usb/gadget/function/f_hid.c
+++ b/drivers/usb/gadget/function/f_hid.c
@@ -1029,9 +1029,9 @@ static inline int hidg_get_minor(void)
 {
 	int ret;
 
-	ret = ida_simple_get(&hidg_ida, 0, 0, GFP_KERNEL);
+	ret = ida_alloc(&hidg_ida, GFP_KERNEL);
 	if (ret >= HIDG_MINORS) {
-		ida_simple_remove(&hidg_ida, ret);
+		ida_free(&hidg_ida, ret);
 		ret = -ENODEV;
 	}
 
@@ -1176,7 +1176,7 @@ static const struct config_item_type hid_func_type = {
 
 static inline void hidg_put_minor(int minor)
 {
-	ida_simple_remove(&hidg_ida, minor);
+	ida_free(&hidg_ida, minor);
 }
 
 static void hidg_free_inst(struct usb_function_instance *f)
diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c
index 076dd4c1be96c..ba7d180cc9e6d 100644
--- a/drivers/usb/gadget/function/f_printer.c
+++ b/drivers/usb/gadget/function/f_printer.c
@@ -1312,9 +1312,9 @@ static inline int gprinter_get_minor(void)
 {
 	int ret;
 
-	ret = ida_simple_get(&printer_ida, 0, 0, GFP_KERNEL);
+	ret = ida_alloc(&printer_ida, GFP_KERNEL);
 	if (ret >= PRINTER_MINORS) {
-		ida_simple_remove(&printer_ida, ret);
+		ida_free(&printer_ida, ret);
 		ret = -ENODEV;
 	}
 
@@ -1323,7 +1323,7 @@ static inline int gprinter_get_minor(void)
 
 static inline void gprinter_put_minor(int minor)
 {
-	ida_simple_remove(&printer_ida, minor);
+	ida_free(&printer_ida, minor);
 }
 
 static int gprinter_setup(int);
diff --git a/drivers/usb/gadget/function/rndis.c b/drivers/usb/gadget/function/rndis.c
index 29bf8664bf582..12c5d9cf450c1 100644
--- a/drivers/usb/gadget/function/rndis.c
+++ b/drivers/usb/gadget/function/rndis.c
@@ -869,12 +869,12 @@ EXPORT_SYMBOL_GPL(rndis_msg_parser);
 
 static inline int rndis_get_nr(void)
 {
-	return ida_simple_get(&rndis_ida, 0, 1000, GFP_KERNEL);
+	return ida_alloc_max(&rndis_ida, 999, GFP_KERNEL);
 }
 
 static inline void rndis_put_nr(int nr)
 {
-	ida_simple_remove(&rndis_ida, nr);
+	ida_free(&rndis_ida, nr);
 }
 
 struct rndis_params *rndis_register(void (*resp_avail)(void *v), void *v)
-- 
2.43.0

[PATCH AUTOSEL 6.9 16/28] usb: dwc3: core: Access XHCI address space temporarily to read port info

[Sasha Levin]

From: Krishna Kurapati <quic_kriskura@quicinc.com>

[ Upstream commit 921e109c6200741499ad0136e41cca9d16431c92 ]

All DWC3 Multi Port controllers that exist today only support host mode.
Temporarily map XHCI address space for host-only controllers and parse
XHCI Extended Capabilities registers to read number of usb2 ports and
usb3 ports present on multiport controller. Each USB Port is at least HS
capable.

The port info for usb2 and usb3 phy are identified as num_usb2_ports
and num_usb3_ports and these are used as iterators for phy operations
and for modifying GUSB2PHYCFG/ GUSB3PIPECTL registers accordingly.

Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240420044901.884098-3-quic_kriskura@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/dwc3/core.c | 61 +++++++++++++++++++++++++++++++++++++++++
 drivers/usb/dwc3/core.h |  5 ++++
 2 files changed, 66 insertions(+)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 100041320e8dd..2a93468bdce50 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -39,6 +39,7 @@
 #include "io.h"
 
 #include "debug.h"
+#include "../host/xhci-ext-caps.h"
 
 #define DWC3_DEFAULT_AUTOSUSPEND_DELAY	5000 /* ms */
 
@@ -1867,10 +1868,56 @@ static int dwc3_get_clocks(struct dwc3 *dwc)
 	return 0;
 }
 
+static int dwc3_get_num_ports(struct dwc3 *dwc)
+{
+	void __iomem *base;
+	u8 major_revision;
+	u32 offset;
+	u32 val;
+
+	/*
+	 * Remap xHCI address space to access XHCI ext cap regs since it is
+	 * needed to get information on number of ports present.
+	 */
+	base = ioremap(dwc->xhci_resources[0].start,
+		       resource_size(&dwc->xhci_resources[0]));
+	if (!base)
+		return -ENOMEM;
+
+	offset = 0;
+	do {
+		offset = xhci_find_next_ext_cap(base, offset,
+						XHCI_EXT_CAPS_PROTOCOL);
+		if (!offset)
+			break;
+
+		val = readl(base + offset);
+		major_revision = XHCI_EXT_PORT_MAJOR(val);
+
+		val = readl(base + offset + 0x08);
+		if (major_revision == 0x03) {
+			dwc->num_usb3_ports += XHCI_EXT_PORT_COUNT(val);
+		} else if (major_revision <= 0x02) {
+			dwc->num_usb2_ports += XHCI_EXT_PORT_COUNT(val);
+		} else {
+			dev_warn(dwc->dev, "unrecognized port major revision %d\n",
+				 major_revision);
+		}
+	} while (1);
+
+	dev_dbg(dwc->dev, "hs-ports: %u ss-ports: %u\n",
+		dwc->num_usb2_ports, dwc->num_usb3_ports);
+
+	iounmap(base);
+
+	return 0;
+}
+
 static int dwc3_probe(struct platform_device *pdev)
 {
 	struct device		*dev = &pdev->dev;
 	struct resource		*res, dwc_res;
+	unsigned int		hw_mode;
 	void __iomem		*regs;
 	struct dwc3		*dwc;
 	int			ret;
@@ -1954,6 +2001,20 @@ static int dwc3_probe(struct platform_device *pdev)
 			goto err_disable_clks;
 	}
 
+	/*
+	 * Currently only DWC3 controllers that are host-only capable
+	 * can have more than one port.
+	 */
+	hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
+	if (hw_mode == DWC3_GHWPARAMS0_MODE_HOST) {
+		ret = dwc3_get_num_ports(dwc);
+		if (ret)
+			goto err_disable_clks;
+	} else {
+		dwc->num_usb2_ports = 1;
+		dwc->num_usb3_ports = 1;
+	}
+
 	spin_lock_init(&dwc->lock);
 	mutex_init(&dwc->mutex);
 
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 180dd8d29287c..ef80864fcd57b 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -1039,6 +1039,8 @@ struct dwc3_scratchpad_array {
  * @usb3_phy: pointer to USB3 PHY
  * @usb2_generic_phy: pointer to USB2 PHY
  * @usb3_generic_phy: pointer to USB3 PHY
+ * @num_usb2_ports: number of USB2 ports
+ * @num_usb3_ports: number of USB3 ports
  * @phys_ready: flag to indicate that PHYs are ready
  * @ulpi: pointer to ulpi interface
  * @ulpi_ready: flag to indicate that ULPI is initialized
@@ -1187,6 +1189,9 @@ struct dwc3 {
 	struct phy		*usb2_generic_phy;
 	struct phy		*usb3_generic_phy;
 
+	u8			num_usb2_ports;
+	u8			num_usb3_ports;
+
 	bool			phys_ready;
 
 	struct ulpi		*ulpi;
-- 
2.43.0

Re: [PATCH AUTOSEL 6.9 16/28] usb: dwc3: core: Access XHCI address space temporarily to read port info

[Johan Hovold]

On Wed, Jun 05, 2024 at 07:48:45AM -0400, Sasha Levin wrote:
> From: Krishna Kurapati <quic_kriskura@quicinc.com>
> 
> [ Upstream commit 921e109c6200741499ad0136e41cca9d16431c92 ]
> 
> All DWC3 Multi Port controllers that exist today only support host mode.
> Temporarily map XHCI address space for host-only controllers and parse
> XHCI Extended Capabilities registers to read number of usb2 ports and
> usb3 ports present on multiport controller. Each USB Port is at least HS
> capable.
> 
> The port info for usb2 and usb3 phy are identified as num_usb2_ports
> and num_usb3_ports and these are used as iterators for phy operations
> and for modifying GUSB2PHYCFG/ GUSB3PIPECTL registers accordingly.
> 
> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
> Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
> Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
> Tested-by: Johan Hovold <johan+linaro@kernel.org>
> Link: https://lore.kernel.org/r/20240420044901.884098-3-quic_kriskura@quicinc.com
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>

This is not a fix. Please drop.

Johan

Re: [PATCH AUTOSEL 6.9 16/28] usb: dwc3: core: Access XHCI address space temporarily to read port info

[Sasha Levin]

On Wed, Jun 05, 2024 at 01:53:22PM +0200, Johan Hovold wrote:
>On Wed, Jun 05, 2024 at 07:48:45AM -0400, Sasha Levin wrote:
>> From: Krishna Kurapati <quic_kriskura@quicinc.com>
>>
>> [ Upstream commit 921e109c6200741499ad0136e41cca9d16431c92 ]
>>
>> All DWC3 Multi Port controllers that exist today only support host mode.
>> Temporarily map XHCI address space for host-only controllers and parse
>> XHCI Extended Capabilities registers to read number of usb2 ports and
>> usb3 ports present on multiport controller. Each USB Port is at least HS
>> capable.
>>
>> The port info for usb2 and usb3 phy are identified as num_usb2_ports
>> and num_usb3_ports and these are used as iterators for phy operations
>> and for modifying GUSB2PHYCFG/ GUSB3PIPECTL registers accordingly.
>>
>> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
>> Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
>> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
>> Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
>> Tested-by: Johan Hovold <johan+linaro@kernel.org>
>> Link: https://lore.kernel.org/r/20240420044901.884098-3-quic_kriskura@quicinc.com
>> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>
>This is not a fix. Please drop.

Dropped, thanks!

-- 
Thanks,
Sasha

[PATCH AUTOSEL 6.9 17/28] f2fs: fix to do sanity check on i_xattr_nid in sanity_check_inode()

[Sasha Levin]

From: Chao Yu <chao@kernel.org>

[ Upstream commit 20faaf30e55522bba2b56d9c46689233205d7717 ]

syzbot reports a kernel bug as below:

F2FS-fs (loop0): Mounted with checkpoint version = 48b305e4
==================================================================
BUG: KASAN: slab-out-of-bounds in f2fs_test_bit fs/f2fs/f2fs.h:2933 [inline]
BUG: KASAN: slab-out-of-bounds in current_nat_addr fs/f2fs/node.h:213 [inline]
BUG: KASAN: slab-out-of-bounds in f2fs_get_node_info+0xece/0x1200 fs/f2fs/node.c:600
Read of size 1 at addr ffff88807a58c76c by task syz-executor280/5076

CPU: 1 PID: 5076 Comm: syz-executor280 Not tainted 6.9.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114
 print_address_description mm/kasan/report.c:377 [inline]
 print_report+0x169/0x550 mm/kasan/report.c:488
 kasan_report+0x143/0x180 mm/kasan/report.c:601
 f2fs_test_bit fs/f2fs/f2fs.h:2933 [inline]
 current_nat_addr fs/f2fs/node.h:213 [inline]
 f2fs_get_node_info+0xece/0x1200 fs/f2fs/node.c:600
 f2fs_xattr_fiemap fs/f2fs/data.c:1848 [inline]
 f2fs_fiemap+0x55d/0x1ee0 fs/f2fs/data.c:1925
 ioctl_fiemap fs/ioctl.c:220 [inline]
 do_vfs_ioctl+0x1c07/0x2e50 fs/ioctl.c:838
 __do_sys_ioctl fs/ioctl.c:902 [inline]
 __se_sys_ioctl+0x81/0x170 fs/ioctl.c:890
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

The root cause is we missed to do sanity check on i_xattr_nid during
f2fs_iget(), so that in fiemap() path, current_nat_addr() will access
nat_bitmap w/ offset from invalid i_xattr_nid, result in triggering
kasan bug report, fix it.

Reported-and-tested-by: syzbot+3694e283cf5c40df6d14@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-f2fs-devel/00000000000094036c0616e72a1d@google.com
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/inode.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/fs/f2fs/inode.c b/fs/f2fs/inode.c
index c26effdce9aa7..2af50bc34fcd7 100644
--- a/fs/f2fs/inode.c
+++ b/fs/f2fs/inode.c
@@ -361,6 +361,12 @@ static bool sanity_check_inode(struct inode *inode, struct page *node_page)
 		return false;
 	}
 
+	if (fi->i_xattr_nid && f2fs_check_nid_range(sbi, fi->i_xattr_nid)) {
+		f2fs_warn(sbi, "%s: inode (ino=%lx) has corrupted i_xattr_nid: %u, run fsck to fix.",
+			  __func__, inode->i_ino, fi->i_xattr_nid);
+		return false;
+	}
+
 	return true;
 }
 
-- 
2.43.0

[PATCH AUTOSEL 6.9 18/28] xhci: remove XHCI_TRUST_TX_LENGTH quirk

[Sasha Levin]

From: Mathias Nyman <mathias.nyman@linux.intel.com>

[ Upstream commit 34b67198244f2d7d8409fa4eb76204c409c0c97e ]

If this quirk was set then driver would treat transfer events with
'Success' completion code as 'Short packet' if there were untransferred
bytes left.

This is so common that turn it into default behavior.

xhci_warn_ratelimited() is no longer used after this, so remove it.

A success event with untransferred bytes left doesn't always mean a
misbehaving controller. If there was an error mid a multi-TRB TD it's
allowed to issue a success event for the last TRB in that TD.

See xhci 1.2 spec 4.9.1 Transfer Descriptors

"Note: If an error is detected while processing a multi-TRB TD, the xHC
 shall generate a Transfer Event for the TRB that the error was detected
 on with the appropriate error Condition Code, then may advance to the
 next TD. If in the process of advancing to the next TD, a Transfer TRB
 is encountered with its IOC flag set, then the Condition Code of the
 Transfer Event generated for that Transfer TRB should be Success,
 because there was no error actually associated with the TRB that
 generated the Event. However, an xHC implementation may redundantly
 assert the original error Condition Code."

Co-developed-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240429140245.3955523-10-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/xhci-pci.c  | 15 ++-------------
 drivers/usb/host/xhci-rcar.c |  6 ++----
 drivers/usb/host/xhci-ring.c | 15 +++++----------
 drivers/usb/host/xhci.h      |  4 +---
 4 files changed, 10 insertions(+), 30 deletions(-)

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 93b6976480188..653b47c45591d 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -270,17 +270,12 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 				"QUIRK: Fresco Logic revision %u "
 				"has broken MSI implementation",
 				pdev->revision);
-		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
 	}
 
 	if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
 			pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1009)
 		xhci->quirks |= XHCI_BROKEN_STREAMS;
 
-	if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
-			pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1100)
-		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
-
 	if (pdev->vendor == PCI_VENDOR_ID_NEC)
 		xhci->quirks |= XHCI_NEC_HOST;
 
@@ -307,11 +302,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 		xhci->quirks |= XHCI_RESET_ON_RESUME;
 	}
 
-	if (pdev->vendor == PCI_VENDOR_ID_AMD) {
-		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
-		if (pdev->device == 0x43f7)
-			xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
-	}
+	if (pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == 0x43f7)
+		xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
 
 	if ((pdev->vendor == PCI_VENDOR_ID_AMD) &&
 		((pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4) ||
@@ -399,12 +391,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
 			pdev->device == PCI_DEVICE_ID_EJ168) {
 		xhci->quirks |= XHCI_RESET_ON_RESUME;
-		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
 		xhci->quirks |= XHCI_BROKEN_STREAMS;
 	}
 	if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
 	    pdev->device == 0x0014) {
-		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
 		xhci->quirks |= XHCI_ZERO_64B_REGS;
 	}
 	if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
@@ -434,7 +424,6 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 	}
 	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
 		pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI) {
-		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
 		xhci->quirks |= XHCI_NO_64BIT_SUPPORT;
 	}
 	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c
index ab9c5969e4624..8b357647728c2 100644
--- a/drivers/usb/host/xhci-rcar.c
+++ b/drivers/usb/host/xhci-rcar.c
@@ -214,8 +214,7 @@ static int xhci_rcar_resume_quirk(struct usb_hcd *hcd)
  */
 #define SET_XHCI_PLAT_PRIV_FOR_RCAR(firmware)				\
 	.firmware_name = firmware,					\
-	.quirks = XHCI_NO_64BIT_SUPPORT | XHCI_TRUST_TX_LENGTH |	\
-		  XHCI_SLOW_SUSPEND,					\
+	.quirks = XHCI_NO_64BIT_SUPPORT |  XHCI_SLOW_SUSPEND,		\
 	.init_quirk = xhci_rcar_init_quirk,				\
 	.plat_start = xhci_rcar_start,					\
 	.resume_quirk = xhci_rcar_resume_quirk,
@@ -229,8 +228,7 @@ static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen3 = {
 };
 
 static const struct xhci_plat_priv xhci_plat_renesas_rzv2m = {
-	.quirks = XHCI_NO_64BIT_SUPPORT | XHCI_TRUST_TX_LENGTH |
-		  XHCI_SLOW_SUSPEND,
+	.quirks = XHCI_NO_64BIT_SUPPORT | XHCI_SLOW_SUSPEND,
 	.init_quirk = xhci_rzv2m_init_quirk,
 	.plat_start = xhci_rzv2m_start,
 };
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 575f0fd9c9f11..e9ba5bc321bd1 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2399,8 +2399,7 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep,
 			break;
 		if (remaining) {
 			frame->status = short_framestatus;
-			if (xhci->quirks & XHCI_TRUST_TX_LENGTH)
-				sum_trbs_for_length = true;
+			sum_trbs_for_length = true;
 			break;
 		}
 		frame->status = 0;
@@ -2650,15 +2649,11 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 	 * transfer type
 	 */
 	case COMP_SUCCESS:
-		if (EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) == 0)
-			break;
-		if (xhci->quirks & XHCI_TRUST_TX_LENGTH ||
-		    ep_ring->last_td_was_short)
+		if (EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {
 			trb_comp_code = COMP_SHORT_PACKET;
-		else
-			xhci_warn_ratelimited(xhci,
-					      "WARN Successful completion on short TX for slot %u ep %u: needs XHCI_TRUST_TX_LENGTH quirk?\n",
-					      slot_id, ep_index);
+			xhci_dbg(xhci, "Successful completion on short TX for slot %u ep %u with last td short %d\n",
+				 slot_id, ep_index, ep_ring->last_td_was_short);
+		}
 		break;
 	case COMP_SHORT_PACKET:
 		break;
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 6f4bf98a62824..cdca3126b302b 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1589,7 +1589,7 @@ struct xhci_hcd {
 #define XHCI_RESET_ON_RESUME	BIT_ULL(7)
 #define	XHCI_SW_BW_CHECKING	BIT_ULL(8)
 #define XHCI_AMD_0x96_HOST	BIT_ULL(9)
-#define XHCI_TRUST_TX_LENGTH	BIT_ULL(10)
+#define XHCI_TRUST_TX_LENGTH	BIT_ULL(10) /* Deprecated */
 #define XHCI_LPM_SUPPORT	BIT_ULL(11)
 #define XHCI_INTEL_HOST		BIT_ULL(12)
 #define XHCI_SPURIOUS_REBOOT	BIT_ULL(13)
@@ -1729,8 +1729,6 @@ static inline bool xhci_has_one_roothub(struct xhci_hcd *xhci)
 	dev_err(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
 #define xhci_warn(xhci, fmt, args...) \
 	dev_warn(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
-#define xhci_warn_ratelimited(xhci, fmt, args...) \
-	dev_warn_ratelimited(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
 #define xhci_info(xhci, fmt, args...) \
 	dev_info(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
 
-- 
2.43.0

[PATCH AUTOSEL 6.9 19/28] tty: add the option to have a tty reject a new ldisc

[Sasha Levin]

From: Linus Torvalds <torvalds@linux-foundation.org>

[ Upstream commit 6bd23e0c2bb6c65d4f5754d1456bc9a4427fc59b ]

... and use it to limit the virtual terminals to just N_TTY.  They are
kind of special, and in particular, the "con_write()" routine violates
the "writes cannot sleep" rule that some ldiscs rely on.

This avoids the

   BUG: sleeping function called from invalid context at kernel/printk/printk.c:2659

when N_GSM has been attached to a virtual console, and gsmld_write()
calls con_write() while holding a spinlock, and con_write() then tries
to get the console lock.

Tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Daniel Starke <daniel.starke@siemens.com>
Reported-by: syzbot <syzbot+dbac96d8e73b61aa559c@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=dbac96d8e73b61aa559c
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240423163339.59780-1-torvalds@linux-foundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/tty_ldisc.c    |  6 ++++++
 drivers/tty/vt/vt.c        | 10 ++++++++++
 include/linux/tty_driver.h |  8 ++++++++
 3 files changed, 24 insertions(+)

diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 3f68e213df1f7..d80e9d4c974b4 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -545,6 +545,12 @@ int tty_set_ldisc(struct tty_struct *tty, int disc)
 		goto out;
 	}
 
+	if (tty->ops->ldisc_ok) {
+		retval = tty->ops->ldisc_ok(tty, disc);
+		if (retval)
+			goto out;
+	}
+
 	old_ldisc = tty->ldisc;
 
 	/* Shutdown the old discipline. */
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 9b5b98dfc8b40..cd87e3d1291ed 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -3576,6 +3576,15 @@ static void con_cleanup(struct tty_struct *tty)
 	tty_port_put(&vc->port);
 }
 
+/*
+ * We can't deal with anything but the N_TTY ldisc,
+ * because we can sleep in our write() routine.
+ */
+static int con_ldisc_ok(struct tty_struct *tty, int ldisc)
+{
+	return ldisc == N_TTY ? 0 : -EINVAL;
+}
+
 static int default_color           = 7; /* white */
 static int default_italic_color    = 2; // green (ASCII)
 static int default_underline_color = 3; // cyan (ASCII)
@@ -3695,6 +3704,7 @@ static const struct tty_operations con_ops = {
 	.resize = vt_resize,
 	.shutdown = con_shutdown,
 	.cleanup = con_cleanup,
+	.ldisc_ok = con_ldisc_ok,
 };
 
 static struct cdev vc0_cdev;
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index 7372124fbf90b..dd4b31ce6d5d4 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -154,6 +154,13 @@ struct serial_struct;
  *
  *	Optional. Called under the @tty->termios_rwsem. May sleep.
  *
+ * @ldisc_ok: ``int ()(struct tty_struct *tty, int ldisc)``
+ *
+ *	This routine allows the @tty driver to decide if it can deal
+ *	with a particular @ldisc.
+ *
+ *	Optional. Called under the @tty->ldisc_sem and @tty->termios_rwsem.
+ *
  * @set_ldisc: ``void ()(struct tty_struct *tty)``
  *
  *	This routine allows the @tty driver to be notified when the device's
@@ -372,6 +379,7 @@ struct tty_operations {
 	void (*hangup)(struct tty_struct *tty);
 	int (*break_ctl)(struct tty_struct *tty, int state);
 	void (*flush_buffer)(struct tty_struct *tty);
+	int (*ldisc_ok)(struct tty_struct *tty, int ldisc);
 	void (*set_ldisc)(struct tty_struct *tty);
 	void (*wait_until_sent)(struct tty_struct *tty, int timeout);
 	void (*send_xchar)(struct tty_struct *tty, u8 ch);
-- 
2.43.0

[PATCH AUTOSEL 6.9 20/28] greybus: Fix use-after-free bug in gb_interface_release due to race condition.

[Sasha Levin]

From: Sicong Huang <congei42@163.com>

[ Upstream commit 5c9c5d7f26acc2c669c1dcf57d1bb43ee99220ce ]

In gb_interface_create, &intf->mode_switch_completion is bound with
gb_interface_mode_switch_work. Then it will be started by
gb_interface_request_mode_switch. Here is the relevant code.
if (!queue_work(system_long_wq, &intf->mode_switch_work)) {
	...
}

If we call gb_interface_release to make cleanup, there may be an
unfinished work. This function will call kfree to free the object
"intf". However, if gb_interface_mode_switch_work is scheduled to
run after kfree, it may cause use-after-free error as
gb_interface_mode_switch_work will use the object "intf".
The possible execution flow that may lead to the issue is as follows:

CPU0                            CPU1

                            |   gb_interface_create
                            |   gb_interface_request_mode_switch
gb_interface_release        |
kfree(intf) (free)          |
                            |   gb_interface_mode_switch_work
                            |   mutex_lock(&intf->mutex) (use)

Fix it by canceling the work before kfree.

Signed-off-by: Sicong Huang <congei42@163.com>
Link: https://lore.kernel.org/r/20240416080313.92306-1-congei42@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/greybus/interface.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/greybus/interface.c b/drivers/greybus/interface.c
index fd58a86b0888d..d022bfb5e95d7 100644
--- a/drivers/greybus/interface.c
+++ b/drivers/greybus/interface.c
@@ -693,6 +693,7 @@ static void gb_interface_release(struct device *dev)
 
 	trace_gb_interface_release(intf);
 
+	cancel_work_sync(&intf->mode_switch_work);
 	kfree(intf);
 }
 
-- 
2.43.0

[PATCH AUTOSEL 6.9 21/28] i2c: lpi2c: Avoid calling clk_get_rate during transfer

[Sasha Levin]

From: Alexander Stein <alexander.stein@ew.tq-group.com>

[ Upstream commit 4268254a39484fc11ba991ae148bacbe75d9cc0a ]

Instead of repeatedly calling clk_get_rate for each transfer, lock
the clock rate and cache the value.
A deadlock has been observed while adding tlv320aic32x4 audio codec to
the system. When this clock provider adds its clock, the clk mutex is
locked already, it needs to access i2c, which in return needs the mutex
for clk_get_rate as well.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-imx-lpi2c.c | 19 ++++++++++++++++---
 1 file changed, 16 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c b/drivers/i2c/busses/i2c-imx-lpi2c.c
index 6d72e4e126dde..36e8f6196a87b 100644
--- a/drivers/i2c/busses/i2c-imx-lpi2c.c
+++ b/drivers/i2c/busses/i2c-imx-lpi2c.c
@@ -99,6 +99,7 @@ struct lpi2c_imx_struct {
 	__u8			*rx_buf;
 	__u8			*tx_buf;
 	struct completion	complete;
+	unsigned long		rate_per;
 	unsigned int		msglen;
 	unsigned int		delivered;
 	unsigned int		block_data;
@@ -212,9 +213,7 @@ static int lpi2c_imx_config(struct lpi2c_imx_struct *lpi2c_imx)
 
 	lpi2c_imx_set_mode(lpi2c_imx);
 
-	clk_rate = clk_get_rate(lpi2c_imx->clks[0].clk);
-	if (!clk_rate)
-		return -EINVAL;
+	clk_rate = lpi2c_imx->rate_per;
 
 	if (lpi2c_imx->mode == HS || lpi2c_imx->mode == ULTRA_FAST)
 		filt = 0;
@@ -611,6 +610,20 @@ static int lpi2c_imx_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	/*
+	 * Lock the parent clock rate to avoid getting parent clock upon
+	 * each transfer
+	 */
+	ret = devm_clk_rate_exclusive_get(&pdev->dev, lpi2c_imx->clks[0].clk);
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret,
+				     "can't lock I2C peripheral clock rate\n");
+
+	lpi2c_imx->rate_per = clk_get_rate(lpi2c_imx->clks[0].clk);
+	if (!lpi2c_imx->rate_per)
+		return dev_err_probe(&pdev->dev, -EINVAL,
+				     "can't get I2C peripheral clock rate\n");
+
 	pm_runtime_set_autosuspend_delay(&pdev->dev, I2C_PM_TIMEOUT);
 	pm_runtime_use_autosuspend(&pdev->dev);
 	pm_runtime_get_noresume(&pdev->dev);
-- 
2.43.0

[PATCH AUTOSEL 6.9 22/28] cxl: Add post-reset warning if reset results in loss of previously committed HDM decoders

[Sasha Levin]

From: Dave Jiang <dave.jiang@intel.com>

[ Upstream commit 934edcd436dca0447e0d3691a908394ba16d06c3 ]

Secondary Bus Reset (SBR) is equivalent to a device being hot removed and
inserted again. Doing a SBR on a CXL type 3 device is problematic if the
exported device memory is part of system memory that cannot be offlined.
The event is equivalent to violently ripping out that range of memory from
the kernel. While the hardware requires the "Unmask SBR" bit set in the
Port Control Extensions register and the kernel currently does not unmask
it, user can unmask this bit via setpci or similar tool.

The driver does not have a way to detect whether a reset coming from the
PCI subsystem is a Function Level Reset (FLR) or SBR. The only way to
detect is to note if a decoder is marked as enabled in software but the
decoder control register indicates it's not committed.

Add a helper function to find discrepancy between the decoder software
state versus the hardware register state.

Suggested-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20240502165851.1948523-6-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cxl/core/pci.c | 29 +++++++++++++++++++++++++++++
 drivers/cxl/cxl.h      |  2 ++
 drivers/cxl/pci.c      | 22 ++++++++++++++++++++++
 3 files changed, 53 insertions(+)

diff --git a/drivers/cxl/core/pci.c b/drivers/cxl/core/pci.c
index 0df09bd794088..2773f05adb7d2 100644
--- a/drivers/cxl/core/pci.c
+++ b/drivers/cxl/core/pci.c
@@ -1045,3 +1045,32 @@ long cxl_pci_get_latency(struct pci_dev *pdev)
 
 	return cxl_flit_size(pdev) * MEGA / bw;
 }
+
+static int __cxl_endpoint_decoder_reset_detected(struct device *dev, void *data)
+{
+	struct cxl_port *port = data;
+	struct cxl_decoder *cxld;
+	struct cxl_hdm *cxlhdm;
+	void __iomem *hdm;
+	u32 ctrl;
+
+	if (!is_endpoint_decoder(dev))
+		return 0;
+
+	cxld = to_cxl_decoder(dev);
+	if ((cxld->flags & CXL_DECODER_F_ENABLE) == 0)
+		return 0;
+
+	cxlhdm = dev_get_drvdata(&port->dev);
+	hdm = cxlhdm->regs.hdm_decoder;
+	ctrl = readl(hdm + CXL_HDM_DECODER0_CTRL_OFFSET(cxld->id));
+
+	return !FIELD_GET(CXL_HDM_DECODER0_CTRL_COMMITTED, ctrl);
+}
+
+bool cxl_endpoint_decoder_reset_detected(struct cxl_port *port)
+{
+	return device_for_each_child(&port->dev, port,
+				     __cxl_endpoint_decoder_reset_detected);
+}
+EXPORT_SYMBOL_NS_GPL(cxl_endpoint_decoder_reset_detected, CXL);
diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
index 036d17db68e00..72fa477407689 100644
--- a/drivers/cxl/cxl.h
+++ b/drivers/cxl/cxl.h
@@ -891,6 +891,8 @@ void cxl_coordinates_combine(struct access_coordinate *out,
 			     struct access_coordinate *c1,
 			     struct access_coordinate *c2);
 
+bool cxl_endpoint_decoder_reset_detected(struct cxl_port *port);
+
 /*
  * Unit test builds overrides this to __weak, find the 'strong' version
  * of these symbols in tools/testing/cxl/.
diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
index 2ff361e756d66..659f9d46b154c 100644
--- a/drivers/cxl/pci.c
+++ b/drivers/cxl/pci.c
@@ -957,11 +957,33 @@ static void cxl_error_resume(struct pci_dev *pdev)
 		 dev->driver ? "successful" : "failed");
 }
 
+static void cxl_reset_done(struct pci_dev *pdev)
+{
+	struct cxl_dev_state *cxlds = pci_get_drvdata(pdev);
+	struct cxl_memdev *cxlmd = cxlds->cxlmd;
+	struct device *dev = &pdev->dev;
+
+	/*
+	 * FLR does not expect to touch the HDM decoders and related
+	 * registers.  SBR, however, will wipe all device configurations.
+	 * Issue a warning if there was an active decoder before the reset
+	 * that no longer exists.
+	 */
+	guard(device)(&cxlmd->dev);
+	if (cxlmd->endpoint &&
+	    cxl_endpoint_decoder_reset_detected(cxlmd->endpoint)) {
+		dev_crit(dev, "SBR happened without memory regions removal.\n");
+		dev_crit(dev, "System may be unstable if regions hosted system memory.\n");
+		add_taint(TAINT_USER, LOCKDEP_STILL_OK);
+	}
+}
+
 static const struct pci_error_handlers cxl_error_handlers = {
 	.error_detected	= cxl_error_detected,
 	.slot_reset	= cxl_slot_reset,
 	.resume		= cxl_error_resume,
 	.cor_error_detected	= cxl_cor_error_detected,
+	.reset_done	= cxl_reset_done,
 };
 
 static struct pci_driver cxl_pci_driver = {
-- 
2.43.0

[PATCH AUTOSEL 6.9 23/28] vfio/pci: Collect hot-reset devices to local buffer

[Sasha Levin]

From: Alex Williamson <alex.williamson@redhat.com>

[ Upstream commit f6944d4a0b87c16bc34ae589169e1ded3d4db08e ]

Lockdep reports the below circular locking dependency issue.  The
mmap_lock acquisition while holding pci_bus_sem is due to the use of
copy_to_user() from within a pci_walk_bus() callback.

Building the devices array directly into the user buffer is only for
convenience.  Instead we can allocate a local buffer for the array,
bounded by the number of devices on the bus/slot, fill the device
information into this local buffer, then copy it into the user buffer
outside the bus walk callback.

======================================================
WARNING: possible circular locking dependency detected
6.9.0-rc5+ #39 Not tainted
------------------------------------------------------
CPU 0/KVM/4113 is trying to acquire lock:
ffff99a609ee18a8 (&vdev->vma_lock){+.+.}-{4:4}, at: vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core]

but task is already holding lock:
ffff99a243a052a0 (&mm->mmap_lock){++++}-{4:4}, at: vaddr_get_pfns+0x3f/0x170 [vfio_iommu_type1]

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #3 (&mm->mmap_lock){++++}-{4:4}:
       __lock_acquire+0x4e4/0xb90
       lock_acquire+0xbc/0x2d0
       __might_fault+0x5c/0x80
       _copy_to_user+0x1e/0x60
       vfio_pci_fill_devs+0x9f/0x130 [vfio_pci_core]
       vfio_pci_walk_wrapper+0x45/0x60 [vfio_pci_core]
       __pci_walk_bus+0x6b/0xb0
       vfio_pci_ioctl_get_pci_hot_reset_info+0x10b/0x1d0 [vfio_pci_core]
       vfio_pci_core_ioctl+0x1cb/0x400 [vfio_pci_core]
       vfio_device_fops_unl_ioctl+0x7e/0x140 [vfio]
       __x64_sys_ioctl+0x8a/0xc0
       do_syscall_64+0x8d/0x170
       entry_SYSCALL_64_after_hwframe+0x76/0x7e

-> #2 (pci_bus_sem){++++}-{4:4}:
       __lock_acquire+0x4e4/0xb90
       lock_acquire+0xbc/0x2d0
       down_read+0x3e/0x160
       pci_bridge_wait_for_secondary_bus.part.0+0x33/0x2d0
       pci_reset_bus+0xdd/0x160
       vfio_pci_dev_set_hot_reset+0x256/0x270 [vfio_pci_core]
       vfio_pci_ioctl_pci_hot_reset_groups+0x1a3/0x280 [vfio_pci_core]
       vfio_pci_core_ioctl+0x3b5/0x400 [vfio_pci_core]
       vfio_device_fops_unl_ioctl+0x7e/0x140 [vfio]
       __x64_sys_ioctl+0x8a/0xc0
       do_syscall_64+0x8d/0x170
       entry_SYSCALL_64_after_hwframe+0x76/0x7e

-> #1 (&vdev->memory_lock){+.+.}-{4:4}:
       __lock_acquire+0x4e4/0xb90
       lock_acquire+0xbc/0x2d0
       down_write+0x3b/0xc0
       vfio_pci_zap_and_down_write_memory_lock+0x1c/0x30 [vfio_pci_core]
       vfio_basic_config_write+0x281/0x340 [vfio_pci_core]
       vfio_config_do_rw+0x1fa/0x300 [vfio_pci_core]
       vfio_pci_config_rw+0x75/0xe50 [vfio_pci_core]
       vfio_pci_rw+0xea/0x1a0 [vfio_pci_core]
       vfs_write+0xea/0x520
       __x64_sys_pwrite64+0x90/0xc0
       do_syscall_64+0x8d/0x170
       entry_SYSCALL_64_after_hwframe+0x76/0x7e

-> #0 (&vdev->vma_lock){+.+.}-{4:4}:
       check_prev_add+0xeb/0xcc0
       validate_chain+0x465/0x530
       __lock_acquire+0x4e4/0xb90
       lock_acquire+0xbc/0x2d0
       __mutex_lock+0x97/0xde0
       vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core]
       __do_fault+0x31/0x160
       do_pte_missing+0x65/0x3b0
       __handle_mm_fault+0x303/0x720
       handle_mm_fault+0x10f/0x460
       fixup_user_fault+0x7f/0x1f0
       follow_fault_pfn+0x66/0x1c0 [vfio_iommu_type1]
       vaddr_get_pfns+0xf2/0x170 [vfio_iommu_type1]
       vfio_pin_pages_remote+0x348/0x4e0 [vfio_iommu_type1]
       vfio_pin_map_dma+0xd2/0x330 [vfio_iommu_type1]
       vfio_dma_do_map+0x2c0/0x440 [vfio_iommu_type1]
       vfio_iommu_type1_ioctl+0xc5/0x1d0 [vfio_iommu_type1]
       __x64_sys_ioctl+0x8a/0xc0
       do_syscall_64+0x8d/0x170
       entry_SYSCALL_64_after_hwframe+0x76/0x7e

other info that might help us debug this:

Chain exists of:
  &vdev->vma_lock --> pci_bus_sem --> &mm->mmap_lock

 Possible unsafe locking scenario:

block dm-0: the capability attribute has been deprecated.
       CPU0                    CPU1
       ----                    ----
  rlock(&mm->mmap_lock);
                               lock(pci_bus_sem);
                               lock(&mm->mmap_lock);
  lock(&vdev->vma_lock);

 *** DEADLOCK ***

2 locks held by CPU 0/KVM/4113:
 #0: ffff99a25f294888 (&iommu->lock#2){+.+.}-{4:4}, at: vfio_dma_do_map+0x60/0x440 [vfio_iommu_type1]
 #1: ffff99a243a052a0 (&mm->mmap_lock){++++}-{4:4}, at: vaddr_get_pfns+0x3f/0x170 [vfio_iommu_type1]

stack backtrace:
CPU: 1 PID: 4113 Comm: CPU 0/KVM Not tainted 6.9.0-rc5+ #39
Hardware name: Dell Inc. PowerEdge T640/04WYPY, BIOS 2.15.1 06/16/2022
Call Trace:
 <TASK>
 dump_stack_lvl+0x64/0xa0
 check_noncircular+0x131/0x150
 check_prev_add+0xeb/0xcc0
 ? add_chain_cache+0x10a/0x2f0
 ? __lock_acquire+0x4e4/0xb90
 validate_chain+0x465/0x530
 __lock_acquire+0x4e4/0xb90
 lock_acquire+0xbc/0x2d0
 ? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core]
 ? lock_is_held_type+0x9a/0x110
 __mutex_lock+0x97/0xde0
 ? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core]
 ? lock_acquire+0xbc/0x2d0
 ? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core]
 ? find_held_lock+0x2b/0x80
 ? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core]
 vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core]
 __do_fault+0x31/0x160
 do_pte_missing+0x65/0x3b0
 __handle_mm_fault+0x303/0x720
 handle_mm_fault+0x10f/0x460
 fixup_user_fault+0x7f/0x1f0
 follow_fault_pfn+0x66/0x1c0 [vfio_iommu_type1]
 vaddr_get_pfns+0xf2/0x170 [vfio_iommu_type1]
 vfio_pin_pages_remote+0x348/0x4e0 [vfio_iommu_type1]
 vfio_pin_map_dma+0xd2/0x330 [vfio_iommu_type1]
 vfio_dma_do_map+0x2c0/0x440 [vfio_iommu_type1]
 vfio_iommu_type1_ioctl+0xc5/0x1d0 [vfio_iommu_type1]
 __x64_sys_ioctl+0x8a/0xc0
 do_syscall_64+0x8d/0x170
 ? rcu_core+0x8d/0x250
 ? __lock_release+0x5e/0x160
 ? rcu_core+0x8d/0x250
 ? lock_release+0x5f/0x120
 ? sched_clock+0xc/0x30
 ? sched_clock_cpu+0xb/0x190
 ? irqtime_account_irq+0x40/0xc0
 ? __local_bh_enable+0x54/0x60
 ? __do_softirq+0x315/0x3ca
 ? lockdep_hardirqs_on_prepare.part.0+0x97/0x140
 entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f8300d0357b
Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 75 68 0f 00 f7 d8 64 89 01 48
RSP: 002b:00007f82ef3fb948 EFLAGS: 00000206 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f8300d0357b
RDX: 00007f82ef3fb990 RSI: 0000000000003b71 RDI: 0000000000000023
RBP: 00007f82ef3fb9c0 R08: 0000000000000000 R09: 0000561b7e0bcac2
R10: 0000000000000000 R11: 0000000000000206 R12: 0000000000000000
R13: 0000000200000000 R14: 0000381800000000 R15: 0000000000000000
 </TASK>

Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240503143138.3562116-1-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vfio/pci/vfio_pci_core.c | 78 ++++++++++++++++++++------------
 1 file changed, 49 insertions(+), 29 deletions(-)

diff --git a/drivers/vfio/pci/vfio_pci_core.c b/drivers/vfio/pci/vfio_pci_core.c
index d94d61b92c1ac..d8c95cc16be81 100644
--- a/drivers/vfio/pci/vfio_pci_core.c
+++ b/drivers/vfio/pci/vfio_pci_core.c
@@ -778,25 +778,26 @@ static int vfio_pci_count_devs(struct pci_dev *pdev, void *data)
 }
 
 struct vfio_pci_fill_info {
-	struct vfio_pci_dependent_device __user *devices;
-	struct vfio_pci_dependent_device __user *devices_end;
 	struct vfio_device *vdev;
+	struct vfio_pci_dependent_device *devices;
+	int nr_devices;
 	u32 count;
 	u32 flags;
 };
 
 static int vfio_pci_fill_devs(struct pci_dev *pdev, void *data)
 {
-	struct vfio_pci_dependent_device info = {
-		.segment = pci_domain_nr(pdev->bus),
-		.bus = pdev->bus->number,
-		.devfn = pdev->devfn,
-	};
+	struct vfio_pci_dependent_device *info;
 	struct vfio_pci_fill_info *fill = data;
 
-	fill->count++;
-	if (fill->devices >= fill->devices_end)
-		return 0;
+	/* The topology changed since we counted devices */
+	if (fill->count >= fill->nr_devices)
+		return -EAGAIN;
+
+	info = &fill->devices[fill->count++];
+	info->segment = pci_domain_nr(pdev->bus);
+	info->bus = pdev->bus->number;
+	info->devfn = pdev->devfn;
 
 	if (fill->flags & VFIO_PCI_HOT_RESET_FLAG_DEV_ID) {
 		struct iommufd_ctx *iommufd = vfio_iommufd_device_ictx(fill->vdev);
@@ -809,19 +810,19 @@ static int vfio_pci_fill_devs(struct pci_dev *pdev, void *data)
 		 */
 		vdev = vfio_find_device_in_devset(dev_set, &pdev->dev);
 		if (!vdev) {
-			info.devid = VFIO_PCI_DEVID_NOT_OWNED;
+			info->devid = VFIO_PCI_DEVID_NOT_OWNED;
 		} else {
 			int id = vfio_iommufd_get_dev_id(vdev, iommufd);
 
 			if (id > 0)
-				info.devid = id;
+				info->devid = id;
 			else if (id == -ENOENT)
-				info.devid = VFIO_PCI_DEVID_OWNED;
+				info->devid = VFIO_PCI_DEVID_OWNED;
 			else
-				info.devid = VFIO_PCI_DEVID_NOT_OWNED;
+				info->devid = VFIO_PCI_DEVID_NOT_OWNED;
 		}
 		/* If devid is VFIO_PCI_DEVID_NOT_OWNED, clear owned flag. */
-		if (info.devid == VFIO_PCI_DEVID_NOT_OWNED)
+		if (info->devid == VFIO_PCI_DEVID_NOT_OWNED)
 			fill->flags &= ~VFIO_PCI_HOT_RESET_FLAG_DEV_ID_OWNED;
 	} else {
 		struct iommu_group *iommu_group;
@@ -830,13 +831,10 @@ static int vfio_pci_fill_devs(struct pci_dev *pdev, void *data)
 		if (!iommu_group)
 			return -EPERM; /* Cannot reset non-isolated devices */
 
-		info.group_id = iommu_group_id(iommu_group);
+		info->group_id = iommu_group_id(iommu_group);
 		iommu_group_put(iommu_group);
 	}
 
-	if (copy_to_user(fill->devices, &info, sizeof(info)))
-		return -EFAULT;
-	fill->devices++;
 	return 0;
 }
 
@@ -1258,10 +1256,11 @@ static int vfio_pci_ioctl_get_pci_hot_reset_info(
 {
 	unsigned long minsz =
 		offsetofend(struct vfio_pci_hot_reset_info, count);
+	struct vfio_pci_dependent_device *devices = NULL;
 	struct vfio_pci_hot_reset_info hdr;
 	struct vfio_pci_fill_info fill = {};
 	bool slot = false;
-	int ret = 0;
+	int ret, count;
 
 	if (copy_from_user(&hdr, arg, minsz))
 		return -EFAULT;
@@ -1277,9 +1276,23 @@ static int vfio_pci_ioctl_get_pci_hot_reset_info(
 	else if (pci_probe_reset_bus(vdev->pdev->bus))
 		return -ENODEV;
 
-	fill.devices = arg->devices;
-	fill.devices_end = arg->devices +
-			   (hdr.argsz - sizeof(hdr)) / sizeof(arg->devices[0]);
+	ret = vfio_pci_for_each_slot_or_bus(vdev->pdev, vfio_pci_count_devs,
+					    &count, slot);
+	if (ret)
+		return ret;
+
+	if (count > (hdr.argsz - sizeof(hdr)) / sizeof(*devices)) {
+		hdr.count = count;
+		ret = -ENOSPC;
+		goto header;
+	}
+
+	devices = kcalloc(count, sizeof(*devices), GFP_KERNEL);
+	if (!devices)
+		return -ENOMEM;
+
+	fill.devices = devices;
+	fill.nr_devices = count;
 	fill.vdev = &vdev->vdev;
 
 	if (vfio_device_cdev_opened(&vdev->vdev))
@@ -1291,16 +1304,23 @@ static int vfio_pci_ioctl_get_pci_hot_reset_info(
 					    &fill, slot);
 	mutex_unlock(&vdev->vdev.dev_set->lock);
 	if (ret)
-		return ret;
+		goto out;
+
+	if (copy_to_user(arg->devices, devices,
+			 sizeof(*devices) * fill.count)) {
+		ret = -EFAULT;
+		goto out;
+	}
 
 	hdr.count = fill.count;
 	hdr.flags = fill.flags;
-	if (copy_to_user(arg, &hdr, minsz))
-		return -EFAULT;
 
-	if (fill.count > fill.devices - arg->devices)
-		return -ENOSPC;
-	return 0;
+header:
+	if (copy_to_user(arg, &hdr, minsz))
+		ret = -EFAULT;
+out:
+	kfree(devices);
+	return ret;
 }
 
 static int
-- 
2.43.0

[PATCH AUTOSEL 6.9 24/28] usb: typec: qcom-pmic-typec: split HPD bridge alloc and registration

[Sasha Levin]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit 718b36a7b49acbba36546371db2d235271ceb06c ]

If a probe function returns -EPROBE_DEFER after creating another device
there is a change of ending up in a probe deferral loop, (see commit
fbc35b45f9f6 ("Add documentation on meaning of -EPROBE_DEFER"). In case
of the qcom-pmic-typec driver the tcpm_register_port() function looks up
external resources (USB role switch and inherently via called
typec_register_port() USB-C muxes, switches and retimers).

In order to prevent such probe-defer loops caused by qcom-pmic-typec
driver, use the API added by Johan Hovold and move HPD bridge
registration to the end of the probe function.

The devm_drm_dp_hpd_bridge_add() is called at the end of the probe
function after all TCPM start functions. This is done as a way to
overcome a different problem, the DRM subsystem can not properly cope
with the DRM bridges being destroyed once the bridge is attached. Having
this function call at the end of the probe function prevents possible
DRM bridge device creation followed by destruction in case one of the
TCPM start functions returns an error.

Reported-by: Caleb Connolly <caleb.connolly@linaro.org>
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240424-qc-pmic-typec-hpd-split-v4-1-f7e10d147443@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c
index d3958c061a972..501eddb294e43 100644
--- a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c
+++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c
@@ -41,7 +41,7 @@ static int qcom_pmic_typec_probe(struct platform_device *pdev)
 	struct device_node *np = dev->of_node;
 	const struct pmic_typec_resources *res;
 	struct regmap *regmap;
-	struct device *bridge_dev;
+	struct auxiliary_device *bridge_dev;
 	u32 base;
 	int ret;
 
@@ -92,7 +92,7 @@ static int qcom_pmic_typec_probe(struct platform_device *pdev)
 	if (!tcpm->tcpc.fwnode)
 		return -EINVAL;
 
-	bridge_dev = drm_dp_hpd_bridge_register(tcpm->dev, to_of_node(tcpm->tcpc.fwnode));
+	bridge_dev = devm_drm_dp_hpd_bridge_alloc(tcpm->dev, to_of_node(tcpm->tcpc.fwnode));
 	if (IS_ERR(bridge_dev))
 		return PTR_ERR(bridge_dev);
 
@@ -110,8 +110,14 @@ static int qcom_pmic_typec_probe(struct platform_device *pdev)
 	if (ret)
 		goto port_stop;
 
+	ret = devm_drm_dp_hpd_bridge_add(tcpm->dev, bridge_dev);
+	if (ret)
+		goto pdphy_stop;
+
 	return 0;
 
+pdphy_stop:
+	tcpm->pdphy_stop(tcpm);
 port_stop:
 	tcpm->port_stop(tcpm);
 port_unregister:
-- 
2.43.0

[PATCH AUTOSEL 6.9 25/28] cpufreq: amd-pstate: fix memory leak on CPU EPP exit

[Sasha Levin]

From: Peng Ma <andypma@tencent.com>

[ Upstream commit cea04f3d9aeebda9d9c063c0dfa71e739c322c81 ]

The cpudata memory from kzalloc() in amd_pstate_epp_cpu_init() is
not freed in the analogous exit function, so fix that.

Signed-off-by: Peng Ma <andypma@tencent.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Perry Yuan <Perry.Yuan@amd.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/amd-pstate.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c
index 2015c9fcc3c91..097268e7b0aa8 100644
--- a/drivers/cpufreq/amd-pstate.c
+++ b/drivers/cpufreq/amd-pstate.c
@@ -1378,6 +1378,13 @@ static int amd_pstate_epp_cpu_init(struct cpufreq_policy *policy)
 
 static int amd_pstate_epp_cpu_exit(struct cpufreq_policy *policy)
 {
+	struct amd_cpudata *cpudata = policy->driver_data;
+
+	if (cpudata) {
+		kfree(cpudata);
+		policy->driver_data = NULL;
+	}
+
 	pr_debug("CPU %d exiting\n", policy->cpu);
 	return 0;
 }
-- 
2.43.0

[PATCH AUTOSEL 6.9 26/28] ACPI: EC: Install address space handler at the namespace root

[Sasha Levin]

From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>

[ Upstream commit 60fa6ae6e6d09e377fce6f8d9b6f6a4d88769f63 ]

It is reported that _DSM evaluation fails in ucsi_acpi_dsm() on Lenovo
IdeaPad Pro 5 due to a missing address space handler for the EC address
space:

 ACPI Error: No handler for Region [ECSI] (000000007b8176ee) [EmbeddedControl] (20230628/evregion-130)

This happens because if there is no ECDT, the EC driver only registers
the EC address space handler for operation regions defined in the EC
device scope of the ACPI namespace while the operation region being
accessed by the _DSM in question is located beyond that scope.

To address this, modify the ACPI EC driver to install the EC address
space handler at the root of the ACPI namespace for the first EC that
can be found regardless of whether or not an ECDT is present.

Note that this change is consistent with some examples in the ACPI
specification in which EC operation regions located outside the EC
device scope are used (for example, see Section 9.17.15 in ACPI 6.5),
so the current behavior of the EC driver is arguably questionable.

Reported-by: webcaptcha <webcapcha@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218789
Link: https://uefi.org/specs/ACPI/6.5/09_ACPI_Defined_Devices_and_Device_Specific_Objects.html#example-asl-code
Link: https://lore.kernel.org/linux-acpi/Zi+0whTvDbAdveHq@kuha.fi.intel.com
Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/ec.c       | 25 ++++++++++++++++---------
 drivers/acpi/internal.h |  1 -
 2 files changed, 16 insertions(+), 10 deletions(-)

diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 02255795b800d..e7793ee9e6498 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -1482,13 +1482,14 @@ static bool install_gpio_irq_event_handler(struct acpi_ec *ec)
 static int ec_install_handlers(struct acpi_ec *ec, struct acpi_device *device,
 			       bool call_reg)
 {
+	acpi_handle scope_handle = ec == first_ec ? ACPI_ROOT_OBJECT : ec->handle;
 	acpi_status status;
 
 	acpi_ec_start(ec, false);
 
 	if (!test_bit(EC_FLAGS_EC_HANDLER_INSTALLED, &ec->flags)) {
 		acpi_ec_enter_noirq(ec);
-		status = acpi_install_address_space_handler_no_reg(ec->handle,
+		status = acpi_install_address_space_handler_no_reg(scope_handle,
 								   ACPI_ADR_SPACE_EC,
 								   &acpi_ec_space_handler,
 								   NULL, ec);
@@ -1497,11 +1498,10 @@ static int ec_install_handlers(struct acpi_ec *ec, struct acpi_device *device,
 			return -ENODEV;
 		}
 		set_bit(EC_FLAGS_EC_HANDLER_INSTALLED, &ec->flags);
-		ec->address_space_handler_holder = ec->handle;
 	}
 
 	if (call_reg && !test_bit(EC_FLAGS_EC_REG_CALLED, &ec->flags)) {
-		acpi_execute_reg_methods(ec->handle, ACPI_ADR_SPACE_EC);
+		acpi_execute_reg_methods(scope_handle, ACPI_ADR_SPACE_EC);
 		set_bit(EC_FLAGS_EC_REG_CALLED, &ec->flags);
 	}
 
@@ -1553,10 +1553,13 @@ static int ec_install_handlers(struct acpi_ec *ec, struct acpi_device *device,
 
 static void ec_remove_handlers(struct acpi_ec *ec)
 {
+	acpi_handle scope_handle = ec == first_ec ? ACPI_ROOT_OBJECT : ec->handle;
+
 	if (test_bit(EC_FLAGS_EC_HANDLER_INSTALLED, &ec->flags)) {
 		if (ACPI_FAILURE(acpi_remove_address_space_handler(
-					ec->address_space_handler_holder,
-					ACPI_ADR_SPACE_EC, &acpi_ec_space_handler)))
+						scope_handle,
+						ACPI_ADR_SPACE_EC,
+						&acpi_ec_space_handler)))
 			pr_err("failed to remove space handler\n");
 		clear_bit(EC_FLAGS_EC_HANDLER_INSTALLED, &ec->flags);
 	}
@@ -1595,14 +1598,18 @@ static int acpi_ec_setup(struct acpi_ec *ec, struct acpi_device *device, bool ca
 {
 	int ret;
 
-	ret = ec_install_handlers(ec, device, call_reg);
-	if (ret)
-		return ret;
-
 	/* First EC capable of handling transactions */
 	if (!first_ec)
 		first_ec = ec;
 
+	ret = ec_install_handlers(ec, device, call_reg);
+	if (ret) {
+		if (ec == first_ec)
+			first_ec = NULL;
+
+		return ret;
+	}
+
 	pr_info("EC_CMD/EC_SC=0x%lx, EC_DATA=0x%lx\n", ec->command_addr,
 		ec->data_addr);
 
diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
index ca72a0dc57151..a0801e0876fc0 100644
--- a/drivers/acpi/internal.h
+++ b/drivers/acpi/internal.h
@@ -185,7 +185,6 @@ enum acpi_ec_event_state {
 
 struct acpi_ec {
 	acpi_handle handle;
-	acpi_handle address_space_handler_holder;
 	int gpe;
 	int irq;
 	unsigned long command_addr;
-- 
2.43.0

[PATCH AUTOSEL 6.9 27/28] PCI: Do not wait for disconnected devices when resuming

[Sasha Levin]

From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

[ Upstream commit 6613443ffc49d03e27f0404978f685c4eac43fba ]

On runtime resume, pci_dev_wait() is called:

  pci_pm_runtime_resume()
    pci_pm_bridge_power_up_actions()
      pci_bridge_wait_for_secondary_bus()
        pci_dev_wait()

While a device is runtime suspended along with its PCI hierarchy, the
device could get disconnected. In such case, the link will not come up no
matter how long pci_dev_wait() waits for it.

Besides the above mentioned case, there could be other ways to get the
device disconnected while pci_dev_wait() is waiting for the link to come
up.

Make pci_dev_wait() exit if the device is already disconnected to avoid
unnecessary delay.

The use cases of pci_dev_wait() boil down to two:

  1. Waiting for the device after reset
  2. pci_bridge_wait_for_secondary_bus()

The callers in both cases seem to benefit from propagating the
disconnection as error even if device disconnection would be more
analoguous to the case where there is no device in the first place which
return 0 from pci_dev_wait(). In the case 2, it results in unnecessary
marking of the devices disconnected again but that is just harmless extra
work.

Also make sure compiler does not become too clever with dev->error_state
and use READ_ONCE() to force a fetch for the up-to-date value.

Link: https://lore.kernel.org/r/20240208132322.4811-1-ilpo.jarvinen@linux.intel.com
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/pci.c   | 5 +++++
 include/linux/pci.h | 7 ++++++-
 2 files changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 4028717ec2cea..f6e321a0ce74c 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1277,6 +1277,11 @@ static int pci_dev_wait(struct pci_dev *dev, char *reset_type, int timeout)
 	for (;;) {
 		u32 id;
 
+		if (pci_dev_is_disconnected(dev)) {
+			pci_dbg(dev, "disconnected; not waiting\n");
+			return -ENOTTY;
+		}
+
 		pci_read_config_dword(dev, PCI_COMMAND, &id);
 		if (!PCI_POSSIBLE_ERROR(id))
 			break;
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 16493426a04ff..6f9c5ed5eb3ba 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -2519,7 +2519,12 @@ static inline struct pci_dev *pcie_find_root_port(struct pci_dev *dev)
 
 static inline bool pci_dev_is_disconnected(const struct pci_dev *dev)
 {
-	return dev->error_state == pci_channel_io_perm_failure;
+	/*
+	 * error_state is set in pci_dev_set_io_state() using xchg/cmpxchg()
+	 * and read w/o common lock. READ_ONCE() ensures compiler cannot cache
+	 * the value (e.g. inside the loop in pci_dev_wait()).
+	 */
+	return READ_ONCE(dev->error_state) == pci_channel_io_perm_failure;
 }
 
 void pci_request_acs(void);
-- 
2.43.0

[PATCH AUTOSEL 6.9 28/28] OPP: Fix required_opp_tables for multiple genpds using same table

[Sasha Levin]

From: Viresh Kumar <viresh.kumar@linaro.org>

[ Upstream commit 2a56c462fe5a2ee61d38e2d7b772bee56115a00c ]

The required_opp_tables parsing is not perfect, as the OPP core does the
parsing solely based on the DT node pointers.

The core sets the required_opp_tables entry to the first OPP table in
the "opp_tables" list, that matches with the node pointer.

If the target DT OPP table is used by multiple devices and they all
create separate instances of 'struct opp_table' from it, then it is
possible that the required_opp_tables entry may be set to the incorrect
sibling device.

Unfortunately, there is no clear way to initialize the right values
during the initial parsing and we need to do this at a later point of
time.

Cross check the OPP table again while the genpds are attached and fix
them if required.

Also add a new API for the genpd core to fetch the device pointer for
the genpd.

Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Reported-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218682
Co-developed-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/opp/core.c        | 31 ++++++++++++++++++++++++++++++-
 drivers/pmdomain/core.c   | 10 ++++++++++
 include/linux/pm_domain.h |  6 ++++++
 3 files changed, 46 insertions(+), 1 deletion(-)

diff --git a/drivers/opp/core.c b/drivers/opp/core.c
index e233734b72205..cb4611fe1b5b2 100644
--- a/drivers/opp/core.c
+++ b/drivers/opp/core.c
@@ -2394,7 +2394,8 @@ static void _opp_detach_genpd(struct opp_table *opp_table)
 static int _opp_attach_genpd(struct opp_table *opp_table, struct device *dev,
 			const char * const *names, struct device ***virt_devs)
 {
-	struct device *virt_dev;
+	struct device *virt_dev, *gdev;
+	struct opp_table *genpd_table;
 	int index = 0, ret = -EINVAL;
 	const char * const *name = names;
 
@@ -2427,6 +2428,34 @@ static int _opp_attach_genpd(struct opp_table *opp_table, struct device *dev,
 			goto err;
 		}
 
+		/*
+		 * The required_opp_tables parsing is not perfect, as the OPP
+		 * core does the parsing solely based on the DT node pointers.
+		 * The core sets the required_opp_tables entry to the first OPP
+		 * table in the "opp_tables" list, that matches with the node
+		 * pointer.
+		 *
+		 * If the target DT OPP table is used by multiple devices and
+		 * they all create separate instances of 'struct opp_table' from
+		 * it, then it is possible that the required_opp_tables entry
+		 * may be set to the incorrect sibling device.
+		 *
+		 * Cross check it again and fix if required.
+		 */
+		gdev = dev_to_genpd_dev(virt_dev);
+		if (IS_ERR(gdev))
+			return PTR_ERR(gdev);
+
+		genpd_table = _find_opp_table(gdev);
+		if (!IS_ERR(genpd_table)) {
+			if (genpd_table != opp_table->required_opp_tables[index]) {
+				dev_pm_opp_put_opp_table(opp_table->required_opp_tables[index]);
+				opp_table->required_opp_tables[index] = genpd_table;
+			} else {
+				dev_pm_opp_put_opp_table(genpd_table);
+			}
+		}
+
 		/*
 		 * Add the virtual genpd device as a user of the OPP table, so
 		 * we can call dev_pm_opp_set_opp() on it directly.
diff --git a/drivers/pmdomain/core.c b/drivers/pmdomain/core.c
index 4215ffd9b11c5..c40eda92a85a7 100644
--- a/drivers/pmdomain/core.c
+++ b/drivers/pmdomain/core.c
@@ -184,6 +184,16 @@ static struct generic_pm_domain *dev_to_genpd(struct device *dev)
 	return pd_to_genpd(dev->pm_domain);
 }
 
+struct device *dev_to_genpd_dev(struct device *dev)
+{
+	struct generic_pm_domain *genpd = dev_to_genpd(dev);
+
+	if (IS_ERR(genpd))
+		return ERR_CAST(genpd);
+
+	return &genpd->dev;
+}
+
 static int genpd_stop_dev(const struct generic_pm_domain *genpd,
 			  struct device *dev)
 {
diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h
index 772d3280d35fa..f24546a3d3db3 100644
--- a/include/linux/pm_domain.h
+++ b/include/linux/pm_domain.h
@@ -260,6 +260,7 @@ int pm_genpd_remove_subdomain(struct generic_pm_domain *genpd,
 int pm_genpd_init(struct generic_pm_domain *genpd,
 		  struct dev_power_governor *gov, bool is_off);
 int pm_genpd_remove(struct generic_pm_domain *genpd);
+struct device *dev_to_genpd_dev(struct device *dev);
 int dev_pm_genpd_set_performance_state(struct device *dev, unsigned int state);
 int dev_pm_genpd_add_notifier(struct device *dev, struct notifier_block *nb);
 int dev_pm_genpd_remove_notifier(struct device *dev);
@@ -307,6 +308,11 @@ static inline int pm_genpd_remove(struct generic_pm_domain *genpd)
 	return -EOPNOTSUPP;
 }
 
+static inline struct device *dev_to_genpd_dev(struct device *dev)
+{
+	return ERR_PTR(-EOPNOTSUPP);
+}
+
 static inline int dev_pm_genpd_set_performance_state(struct device *dev,
 						     unsigned int state)
 {
-- 
2.43.0