* Re: [PATCH 0/2] riscv: spacemit: Add K3 PCIe/USB comb phy support
[not found] <20260430022843.1090138-1-inochiama@gmail.com>
@ 2026-05-10 10:44 ` Vinod Koul
0 siblings, 0 replies; only message in thread
From: Vinod Koul @ 2026-05-10 10:44 UTC (permalink / raw)
To: Inochi Amaoto
Cc: Neil Armstrong, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Yixun Lan, Kees Cook, Gustavo A. R. Silva, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Alexandre Ghiti, Ze Huang, Alex Elder,
linux-phy, devicetree, linux-riscv, spacemit, linux-kernel,
linux-hardening, Yixun Lan, Longbin Li
On 30-04-26, 10:28, Inochi Amaoto wrote:
> The PCIe/USB comb phy on K3 is a big phy that contains multiple
> standalone phys for each PCIe and USB controllers. This phy is
> required to configure a syscon device for mux configuration and
> calibration.
Please check https://sashiko.dev/#/patchset/20260430022843.1090138-1-inochiama%40gmail.com
>
> Inochi Amaoto (2):
> dt-bindings: phy: Add Spacemit K3 USB3/PCIe comb phy support
> phy: spacemit: Add USB3/PCIe comb PHY driver for Spacemit K3
>
> .../bindings/phy/spacemit,k3-comb-phy.yaml | 63 +++
> drivers/phy/spacemit/Kconfig | 16 +
> drivers/phy/spacemit/Makefile | 2 +
> drivers/phy/spacemit/phy-k3-combphy.c | 250 +++++++++++
> drivers/phy/spacemit/phy-k3-common.c | 398 ++++++++++++++++++
> drivers/phy/spacemit/phy-k3-common.h | 27 ++
> 6 files changed, 756 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/spacemit,k3-comb-phy.yaml
> create mode 100644 drivers/phy/spacemit/phy-k3-combphy.c
> create mode 100644 drivers/phy/spacemit/phy-k3-common.c
> create mode 100644 drivers/phy/spacemit/phy-k3-common.h
>
> --
> 2.54.0
--
~Vinod
^ permalink raw reply [flat|nested] only message in thread