From: Sergey Senozhatsky <senozhatsky@chromium.org>
To: Oliver Neukum <oneukum@suse.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>,
Alan Stern <stern@rowland.harvard.edu>,
linux-usb@vger.kernel.org, linux-scsi@vger.kernel.org,
usb-storage@lists.one-eyed-alien.net,
linux-kernel@vger.kernel.org, Tomasz Figa <tfiga@chromium.org>
Subject: Re: [usb-storage] [RFC PATCH] usb: storage: uas: limit consecutive device resets in error handling
Date: Thu, 2 Jul 2026 11:25:50 +0900 [thread overview]
Message-ID: <akXJuqvHLUpcjXIv@google.com> (raw)
In-Reply-To: <e2599d9b-5dd9-47db-8339-f1aa825a11d6@suse.com>
On (26/07/01 10:28), Oliver Neukum wrote:
> On 01.07.26 06:03, Sergey Senozhatsky wrote:
> > When a UAS storage device experiences persistent wire or hardware IO
> > failures, commands time out and the SCSI error handler thread invokes
> > uas_eh_device_reset_handler(). If usb_reset_device() succeeds at the
> > USB hub level but the underlying drive remains unresponsive, the reset
>
> What exactly do you mean by unresponsive? Usbcore must at least
> reassign the configuration (and the device address).
I might be using a wrong term, sorry about that, what we see is that
USB reports successful resets, but the device still cannot handle
data writes, requests stall.
[..]
> > Introduce a runtime-configurable module parameter 'reset_limit' (default
> > 3) and track consecutive resets in devinfo->reset_cnt. When a productive
> > block layer command completes successfully (SUBMITTED_BY_BLOCK_LAYER),
> > reset the counter to zero. If consecutive resets exceed reset_limit,
> > abort the loop by completing pending commands with DID_NO_CONNECT and
> > returning FAILED. This allows SCSI EH to offline the unresponsive
> > device.
>
> Let us take a step back. What is the issue here? The device goes
> into error handling. That is not a problem as such. A method
> designed to remedy an error condition has not been effective but seems
> to succeed.
> That must not happen. So what do we do? It seems to me like we
> ought to add a test for the effectiveness of the reset.
> At first glance it looks like UAS should do a TEST UNIT READY
> on its own after a reset.
> Or are we looking at a command that reliably crashes the device and
> is reissued by an upper layer? In that case either we need
> a quirk or the SCSI layer ought to deduce that it is using commands
> it shouldn't use.
>
> Can we have more information about the scenario that triggered
> the desire for this patch?
Unfortunately, I cannot add a lot of info, as I don't posses (nor
have access to) the device in question. The user is on 6.6 LTS
kernel (UAS code wise there doesn't seem to be that much of a
difference compared to mainline). I suppose the misbehaving UAS
device is:
<6>[ 11.902842] usb 2-1.3: New USB device found, idVendor=2109, idProduct=0715, bcdDevice= 2.63
<6>[ 11.902968] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=(Serial: 6)
<6>[ 11.902994] usb 2-1.3: Product: SSK USB3.2 SSD Flash Drive
<6>[ 11.903041] usb 2-1.3: Manufacturer: SSK Corporation
<6>[ 11.903066] usb 2-1.3: SerialNumber: (Serial: 11)
<6>[ 11.909223] scsi host0: uas
<5>[ 11.919288] scsi 0:0:0:0: Direct-Access SSK Port able SSD 256 X082 PQ: 0 ANSI: 6
<5>[ 11.928062] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
<5>[ 11.928336] sd 0:0:0:0: [sda] Write Protect is off
<7>[ 11.928377] sd 0:0:0:0: [sda] Mode Sense: 2f 00 00 00
<5>[ 11.929521] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[ 11.956480] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
<4>[ 11.956515] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
And then all I have is dmesg (ramoops).
(don't get confused by "rq: tag=.. op=..." lines, they are from our downstream
blk-mq stall watchdog)
Cut and paste from the first time UAS reports an error:
<6>[ 704.586138] sd 0:0:0:0: [sda] tag#5 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD OUT
<6>[ 704.586217] sd 0:0:0:0: [sda] tag#5 CDB: Write(10) 2a 00 00 d3 94 08 00 04 00 00
<6>[ 704.687269] sd 0:0:0:0: [sda] tag#4 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD OUT
<6>[ 704.687356] sd 0:0:0:0: [sda] tag#4 CDB: Write(10) 2a 00 00 d3 8c 08 00 04 00 00
<6>[ 704.693877] sd 0:0:0:0: [sda] tag#3 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD OUT
<6>[ 704.693947] sd 0:0:0:0: [sda] tag#3 CDB: Write(10) 2a 00 00 d3 88 08 00 04 00 00
<6>[ 704.700914] sd 0:0:0:0: [sda] tag#2 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT
<6>[ 704.700963] sd 0:0:0:0: [sda] tag#2 CDB: Write(10) 2a 00 00 d3 84 08 00 04 00 00
<6>[ 704.707981] sd 0:0:0:0: [sda] tag#1 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT
<6>[ 704.708053] sd 0:0:0:0: [sda] tag#1 CDB: Write(10) 2a 00 00 d3 80 08 00 04 00 00
<6>[ 704.714947] sd 0:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD OUT
<6>[ 704.715019] sd 0:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 00 d3 90 08 00 04 00 00
<6>[ 704.730668] scsi host0: uas_eh_device_reset_handler start
<6>[ 704.797633] usb 2-1.3: reset SuperSpeed Plus Gen 2x1 USB device number 4 using xhci_hcd
<6>[ 704.817713] scsi host0: uas_eh_device_reset_handler success
<6>[ 735.309699] scsi host0: uas_eh_device_reset_handler start
<6>[ 735.310945] sd 0:0:0:0: [sda] tag#2 uas_zap_pending 0 uas-tag 1 inflight: CMD
<6>[ 735.311018] sd 0:0:0:0: [sda] tag#2 CDB: Write(10) 2a 00 00 d3 94 08 00 04 00 00
<6>[ 735.311057] sd 0:0:0:0: [sda] tag#3 uas_zap_pending 0 uas-tag 2 inflight: CMD
<6>[ 735.311122] sd 0:0:0:0: [sda] tag#3 CDB: Write(10) 2a 00 00 d3 8c 08 00 04 00 00
<6>[ 735.311188] sd 0:0:0:0: [sda] tag#4 uas_zap_pending 0 uas-tag 3 inflight: CMD
<6>[ 735.311224] sd 0:0:0:0: [sda] tag#4 CDB: Write(10) 2a 00 00 d3 88 08 00 04 00 00
<6>[ 735.311289] sd 0:0:0:0: [sda] tag#0 uas_zap_pending 0 uas-tag 4 inflight: CMD
<6>[ 735.311354] sd 0:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 00 d3 84 08 00 04 00 00
<6>[ 735.311390] sd 0:0:0:0: [sda] tag#1 uas_zap_pending 0 uas-tag 5 inflight: CMD
<6>[ 735.311455] sd 0:0:0:0: [sda] tag#1 CDB: Write(10) 2a 00 00 d3 80 08 00 04 00 00
<6>[ 735.311521] sd 0:0:0:0: [sda] tag#5 uas_zap_pending 0 uas-tag 6 inflight: CMD
<6>[ 735.311558] sd 0:0:0:0: [sda] tag#5 CDB: Write(10) 2a 00 00 d3 90 08 00 04 00 00
<6>[ 735.377751] usb 2-1.3: reset SuperSpeed Plus Gen 2x1 USB device number 4 using xhci_hcd
<6>[ 735.398693] scsi host0: uas_eh_device_reset_handler success
<4>[ 750.651133] rq: tag=0 hctx=0 op=WRITE sector=13860872 len=524288 age=76536 ms pid=11900 comm=image_burner state=D
<4>[ 750.651205] rq: tag=1 hctx=0 op=WRITE sector=13865992 len=524288 age=76536 ms pid=11900 comm=image_burner state=D
<4>[ 750.651263] rq: tag=2 hctx=0 op=WRITE sector=13863944 len=524288 age=76536 ms pid=11900 comm=image_burner state=D
<4>[ 750.651320] rq: tag=3 hctx=0 op=WRITE sector=13862920 len=524288 age=76536 ms pid=11900 comm=image_burner state=D
<4>[ 750.651379] rq: tag=4 hctx=0 op=WRITE sector=13861896 len=524288 age=76536 ms pid=11900 comm=image_burner state=D
<4>[ 750.651437] rq: tag=5 hctx=0 op=WRITE sector=13864968 len=524288 age=76536 ms pid=11900 comm=image_burner state=D
<4>[ 750.651494] blk: queue stall on sda: 6 inflight, 6 stalled (threshold 60000 ms)
<6>[ 765.511365] scsi host0: uas_eh_device_reset_handler start
<6>[ 765.512640] sd 0:0:0:0: [sda] tag#4 uas_zap_pending 0 uas-tag 1 inflight: CMD
<6>[ 765.512689] sd 0:0:0:0: [sda] tag#4 CDB: Write(10) 2a 00 00 d3 84 08 00 04 00 00
<6>[ 765.512737] sd 0:0:0:0: [sda] tag#0 uas_zap_pending 0 uas-tag 2 inflight: CMD
<6>[ 765.512762] sd 0:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 00 d3 80 08 00 04 00 00
<6>[ 765.512808] sd 0:0:0:0: [sda] tag#1 uas_zap_pending 0 uas-tag 3 inflight: CMD
<6>[ 765.512855] sd 0:0:0:0: [sda] tag#1 CDB: Write(10) 2a 00 00 d3 94 08 00 04 00 00
<6>[ 765.512880] sd 0:0:0:0: [sda] tag#2 uas_zap_pending 0 uas-tag 4 inflight: CMD
<6>[ 765.512927] sd 0:0:0:0: [sda] tag#2 CDB: Write(10) 2a 00 00 d3 8c 08 00 04 00 00
<6>[ 765.512974] sd 0:0:0:0: [sda] tag#3 uas_zap_pending 0 uas-tag 5 inflight: CMD
<6>[ 765.513000] sd 0:0:0:0: [sda] tag#3 CDB: Write(10) 2a 00 00 d3 88 08 00 04 00 00
<6>[ 765.513047] sd 0:0:0:0: [sda] tag#5 uas_zap_pending 0 uas-tag 6 inflight: CMD
<6>[ 765.513094] sd 0:0:0:0: [sda] tag#5 CDB: Write(10) 2a 00 00 d3 90 08 00 04 00 00
<6>[ 765.577456] usb 2-1.3: reset SuperSpeed Plus Gen 2x1 USB device number 4 using xhci_hcd
<6>[ 765.597265] scsi host0: uas_eh_device_reset_handler success
<6>[ 795.719449] scsi host0: uas_eh_device_reset_handler start
<6>[ 795.720700] sd 0:0:0:0: [sda] tag#4 uas_zap_pending 0 uas-tag 1 inflight: CMD
<6>[ 795.720752] sd 0:0:0:0: [sda] tag#4 CDB: Write(10) 2a 00 00 d3 80 08 00 04 00 00
<6>[ 795.720778] sd 0:0:0:0: [sda] tag#0 uas_zap_pending 0 uas-tag 2 inflight: CMD
<6>[ 795.720826] sd 0:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 00 d3 94 08 00 04 00 00
<6>[ 795.720872] sd 0:0:0:0: [sda] tag#1 uas_zap_pending 0 uas-tag 3 inflight: CMD
<6>[ 795.720897] sd 0:0:0:0: [sda] tag#1 CDB: Write(10) 2a 00 00 d3 8c 08 00 04 00 00
<6>[ 795.720944] sd 0:0:0:0: [sda] tag#2 uas_zap_pending 0 uas-tag 4 inflight: CMD
<6>[ 795.720990] sd 0:0:0:0: [sda] tag#2 CDB: Write(10) 2a 00 00 d3 88 08 00 04 00 00
<6>[ 795.721016] sd 0:0:0:0: [sda] tag#3 uas_zap_pending 0 uas-tag 5 inflight: CMD
<6>[ 795.721062] sd 0:0:0:0: [sda] tag#3 CDB: Write(10) 2a 00 00 d3 84 08 00 04 00 00
<6>[ 795.721109] sd 0:0:0:0: [sda] tag#5 uas_zap_pending 0 uas-tag 6 inflight: CMD
<6>[ 795.721135] sd 0:0:0:0: [sda] tag#5 CDB: Write(10) 2a 00 00 d3 90 08 00 04 00 00
<6>[ 796.007591] usb 2-1.3: reset SuperSpeed Plus Gen 2x1 USB device number 4 using xhci_hcd
<6>[ 796.027767] scsi host0: uas_eh_device_reset_handler success
<4>[ 812.091136] rq: tag=0 hctx=0 op=WRITE sector=13863944 len=524288 age=137976 ms pid=11900 comm=image_burner state=D
<4>[ 812.091194] rq: tag=1 hctx=0 op=WRITE sector=13862920 len=524288 age=137976 ms pid=11900 comm=image_burner state=D
<4>[ 812.091242] rq: tag=2 hctx=0 op=WRITE sector=13861896 len=524288 age=137976 ms pid=11900 comm=image_burner state=D
<4>[ 812.091289] rq: tag=3 hctx=0 op=WRITE sector=13860872 len=524288 age=137976 ms pid=11900 comm=image_burner state=D
<4>[ 812.091335] rq: tag=4 hctx=0 op=WRITE sector=13865992 len=524288 age=137976 ms pid=11900 comm=image_burner state=D
<4>[ 812.091381] rq: tag=5 hctx=0 op=WRITE sector=13864968 len=524288 age=137976 ms pid=11900 comm=image_burner state=D
<4>[ 812.091428] blk: queue stall on sda: 6 inflight, 6 stalled (threshold 60000 ms)
<6>[ 826.435375] scsi host0: uas_eh_device_reset_handler start
<6>[ 826.436559] sd 0:0:0:0: [sda] tag#4 uas_zap_pending 0 uas-tag 1 inflight: CMD
<6>[ 826.436619] sd 0:0:0:0: [sda] tag#4 CDB: Write(10) 2a 00 00 d3 94 08 00 04 00 00
<6>[ 826.436679] sd 0:0:0:0: [sda] tag#0 uas_zap_pending 0 uas-tag 2 inflight: CMD
<6>[ 826.436710] sd 0:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 00 d3 8c 08 00 04 00 00
<6>[ 826.436758] sd 0:0:0:0: [sda] tag#1 uas_zap_pending 0 uas-tag 3 inflight: CMD
<6>[ 826.436807] sd 0:0:0:0: [sda] tag#1 CDB: Write(10) 2a 00 00 d3 88 08 00 04 00 00
<6>[ 826.436834] sd 0:0:0:0: [sda] tag#2 uas_zap_pending 0 uas-tag 4 inflight: CMD
<6>[ 826.436884] sd 0:0:0:0: [sda] tag#2 CDB: Write(10) 2a 00 00 d3 84 08 00 04 00 00
<6>[ 826.436933] sd 0:0:0:0: [sda] tag#3 uas_zap_pending 0 uas-tag 5 inflight: CMD
<6>[ 826.436960] sd 0:0:0:0: [sda] tag#3 CDB: Write(10) 2a 00 00 d3 80 08 00 04 00 00
<6>[ 826.437008] sd 0:0:0:0: [sda] tag#5 uas_zap_pending 0 uas-tag 6 inflight: CMD
<6>[ 826.437056] sd 0:0:0:0: [sda] tag#5 CDB: Write(10) 2a 00 00 d3 90 08 00 04 00 00
<6>[ 826.502749] usb 2-1.3: reset SuperSpeed Plus Gen 2x1 USB device number 4 using xhci_hcd
<6>[ 826.521493] scsi host0: uas_eh_device_reset_handler success
<6>[ 856.652469] scsi host0: uas_eh_device_reset_handler start
<6>[ 856.653458] sd 0:0:0:0: [sda] tag#2 uas_zap_pending 0 uas-tag 1 inflight: CMD
<6>[ 856.653535] sd 0:0:0:0: [sda] tag#2 CDB: Write(10) 2a 00 00 d3 8c 08 00 04 00 00
<6>[ 856.653574] sd 0:0:0:0: [sda] tag#3 uas_zap_pending 0 uas-tag 2 inflight: CMD
<6>[ 856.653640] sd 0:0:0:0: [sda] tag#3 CDB: Write(10) 2a 00 00 d3 88 08 00 04 00 00
<6>[ 856.653706] sd 0:0:0:0: [sda] tag#4 uas_zap_pending 0 uas-tag 3 inflight: CMD
<6>[ 856.653741] sd 0:0:0:0: [sda] tag#4 CDB: Write(10) 2a 00 00 d3 84 08 00 04 00 00
<6>[ 856.653804] sd 0:0:0:0: [sda] tag#0 uas_zap_pending 0 uas-tag 4 inflight: CMD
<6>[ 856.653867] sd 0:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 00 d3 80 08 00 04 00 00
<6>[ 856.653902] sd 0:0:0:0: [sda] tag#1 uas_zap_pending 0 uas-tag 5 inflight: CMD
<6>[ 856.653965] sd 0:0:0:0: [sda] tag#1 CDB: Write(10) 2a 00 00 d3 94 08 00 04 00 00
<6>[ 856.654029] sd 0:0:0:0: [sda] tag#5 uas_zap_pending 0 uas-tag 6 inflight: CMD
<6>[ 856.654064] sd 0:0:0:0: [sda] tag#5 CDB: Write(10) 2a 00 00 d3 90 08 00 04 00 00
<6>[ 856.718609] usb 2-1.3: reset SuperSpeed Plus Gen 2x1 USB device number 4 using xhci_hcd
<6>[ 856.738743] scsi host0: uas_eh_device_reset_handler success
<3>[ 856.738939] sd 0:0:0:0: [sda] tag#0 timing out command, waited 180s
<6>[ 856.738999] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_RESET driverbyte=DRIVER_OK cmd_age=182s
<6>[ 856.739056] sd 0:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 00 d3 80 08 00 04 00 00
<3>[ 856.739119] I/O error, dev sda, sector 13860872 op 0x1:(WRITE) flags 0x4800 phys_seg 128 prio class 2
<3>[ 856.739155] Buffer I/O error on dev sda, logical block 1732609, lost async page write
<3>[ 856.739219] Buffer I/O error on dev sda, logical block 1732610, lost async page write
<3>[ 856.739272] Buffer I/O error on dev sda, logical block 1732611, lost async page write
<3>[ 856.739323] Buffer I/O error on dev sda, logical block 1732612, lost async page write
<3>[ 856.739354] Buffer I/O error on dev sda, logical block 1732613, lost async page write
<3>[ 856.739410] Buffer I/O error on dev sda, logical block 1732614, lost async page write
<3>[ 856.739466] Buffer I/O error on dev sda, logical block 1732615, lost async page write
<3>[ 856.739522] Buffer I/O error on dev sda, logical block 1732616, lost async page write
<3>[ 856.739553] Buffer I/O error on dev sda, logical block 1732617, lost async page write
<3>[ 856.739607] Buffer I/O error on dev sda, logical block 1732618, lost async page write
<3>[ 856.739764] sd 0:0:0:0: [sda] tag#1 timing out command, waited 180s
<6>[ 856.739796] sd 0:0:0:0: [sda] tag#1 FAILED Result: hostbyte=DID_RESET driverbyte=DRIVER_OK cmd_age=182s
<6>[ 856.739852] sd 0:0:0:0: [sda] tag#1 CDB: Write(10) 2a 00 00 d3 94 08 00 04 00 00
<3>[ 856.739907] I/O error, dev sda, sector 13865992 op 0x1:(WRITE) flags 0x4800 phys_seg 128 prio class 2
<3>[ 856.740068] sd 0:0:0:0: [sda] tag#2 timing out command, waited 180s
<6>[ 856.740099] sd 0:0:0:0: [sda] tag#2 FAILED Result: hostbyte=DID_RESET driverbyte=DRIVER_OK cmd_age=182s
<6>[ 856.740154] sd 0:0:0:0: [sda] tag#2 CDB: Write(10) 2a 00 00 d3 8c 08 00 04 00 00
<3>[ 856.740200] I/O error, dev sda, sector 13863944 op 0x1:(WRITE) flags 0x4800 phys_seg 128 prio class 2
<3>[ 856.740310] sd 0:0:0:0: [sda] tag#3 timing out command, waited 180s
<6>[ 856.740338] sd 0:0:0:0: [sda] tag#3 FAILED Result: hostbyte=DID_RESET driverbyte=DRIVER_OK cmd_age=182s
<6>[ 856.740385] sd 0:0:0:0: [sda] tag#3 CDB: Write(10) 2a 00 00 d3 88 08 00 04 00 00
<3>[ 856.740431] I/O error, dev sda, sector 13862920 op 0x1:(WRITE) flags 0x4800 phys_seg 128 prio class 2
<3>[ 856.740532] sd 0:0:0:0: [sda] tag#4 timing out command, waited 180s
<6>[ 856.740558] sd 0:0:0:0: [sda] tag#4 FAILED Result: hostbyte=DID_RESET driverbyte=DRIVER_OK cmd_age=182s
<6>[ 856.740603] sd 0:0:0:0: [sda] tag#4 CDB: Write(10) 2a 00 00 d3 84 08 00 04 00 00
<3>[ 856.740649] I/O error, dev sda, sector 13861896 op 0x1:(WRITE) flags 0x4800 phys_seg 128 prio class 2
<3>[ 856.740750] sd 0:0:0:0: [sda] tag#5 timing out command, waited 180s
<6>[ 856.740775] sd 0:0:0:0: [sda] tag#5 FAILED Result: hostbyte=DID_RESET driverbyte=DRIVER_OK cmd_age=182s
<6>[ 856.740821] sd 0:0:0:0: [sda] tag#5 CDB: Write(10) 2a 00 00 d3 90 08 00 04 00 00
<3>[ 856.740867] I/O error, dev sda, sector 13864968 op 0x1:(WRITE) flags 0x4800 phys_seg 128 prio class 2
<6>[ 886.862169] sd 0:0:0:0: [sda] tag#4 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD
<6>[ 886.862204] sd 0:0:0:0: [sda] tag#4 CDB: Write(10) 2a 00 00 d3 98 08 00 04 00 00
<6>[ 886.862256] sd 0:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT
<6>[ 886.862303] sd 0:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 00 d3 9c 08 00 04 00 00
<6>[ 886.872436] scsi host0: uas_eh_device_reset_handler start
<6>[ 886.936568] usb 2-1.3: reset SuperSpeed Plus Gen 2x1 USB device number 4 using xhci_hcd
<6>[ 886.954990] scsi host0: uas_eh_device_reset_handler success
<6>[ 917.070222] sd 0:0:0:0: [sda] tag#3 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD IN
<6>[ 917.070318] sd 0:0:0:0: [sda] tag#3 CDB: Read(10) 28 00 00 00 00 00 00 00 20 00
<6>[ 917.079434] scsi host0: uas_eh_device_reset_handler start
<6>[ 917.079994] sd 0:0:0:0: [sda] tag#1 uas_zap_pending 0 uas-tag 1 inflight: CMD
<6>[ 917.080046] sd 0:0:0:0: [sda] tag#1 CDB: Write(10) 2a 00 00 d3 98 08 00 04 00 00
<6>[ 917.080072] sd 0:0:0:0: [sda] tag#2 uas_zap_pending 0 uas-tag 2 inflight: CMD
<6>[ 917.080118] sd 0:0:0:0: [sda] tag#2 CDB: Write(10) 2a 00 00 d3 9c 08 00 04 00 00
<6>[ 917.145714] usb 2-1.3: reset SuperSpeed Plus Gen 2x1 USB device number 4 using xhci_hcd
<6>[ 917.164988] scsi host0: uas_eh_device_reset_handler success
<6>[ 917.165155] sd 0:0:0:0: [sda] tag#3 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=30s
<6>[ 917.165210] sd 0:0:0:0: [sda] tag#3 CDB: Read(10) 28 00 00 00 00 00 00 00 20 00
<3>[ 917.165239] I/O error, dev sda, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 3
<4>[ 934.971114] rq: tag=0 hctx=0 op=WRITE sector=13867016 len=524288 age=78231 ms pid=11900 comm=image_burner state=D
<4>[ 934.971169] rq: tag=1 hctx=0 op=WRITE sector=13868040 len=524288 age=78230 ms pid=11900 comm=image_burner state=D
<4>[ 934.971217] blk: queue stall on sda: 3 inflight, 2 stalled (threshold 60000 ms)
<6>[ 947.276222] sd 0:0:0:0: [sda] tag#3 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD IN
<6>[ 947.276282] sd 0:0:0:0: [sda] tag#3 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
<6>[ 947.280489] scsi host0: uas_eh_device_reset_handler start
<6>[ 947.281255] sd 0:0:0:0: [sda] tag#0 uas_zap_pending 0 uas-tag 1 inflight: CMD
<6>[ 947.281309] sd 0:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 00 d3 98 08 00 04 00 00
<6>[ 947.281391] sd 0:0:0:0: [sda] tag#1 uas_zap_pending 0 uas-tag 2 inflight: CMD
<6>[ 947.281468] sd 0:0:0:0: [sda] tag#1 CDB: Write(10) 2a 00 00 d3 9c 08 00 04 00 00
<6>[ 947.346666] usb 2-1.3: reset SuperSpeed Plus Gen 2x1 USB device number 4 using xhci_hcd
<6>[ 947.365031] scsi host0: uas_eh_device_reset_handler success
<6>[ 977.479406] scsi host0: uas_eh_device_reset_handler start
<6>[ 977.479963] sd 0:0:0:0: [sda] tag#2 uas_zap_pending 0 uas-tag 1 inflight: CMD
<6>[ 977.480015] sd 0:0:0:0: [sda] tag#2 CDB: Write(10) 2a 00 00 d3 98 08 00 04 00 00
<6>[ 977.480042] sd 0:0:0:0: [sda] tag#3 uas_zap_pending 0 uas-tag 2 inflight: CMD
<6>[ 977.480089] sd 0:0:0:0: [sda] tag#3 CDB: Write(10) 2a 00 00 d3 9c 08 00 04 00 00
<6>[ 977.480137] sd 0:0:0:0: [sda] tag#4 uas_zap_pending 0 uas-tag 3 inflight: CMD
<6>[ 977.480166] sd 0:0:0:0: [sda] tag#4 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
<6>[ 977.545653] usb 2-1.3: reset SuperSpeed Plus Gen 2x1 USB device number 4 using xhci_hcd
<6>[ 977.565338] scsi host0: uas_eh_device_reset_handler success
<3>[ 984.123394] INFO: task image_burner:11900 blocked for more than 122 seconds.
<3>[ 984.123449] Tainted: G S U 6.6.135-09364-g548ca84e71c6 #1
<3>[ 984.123501] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
<6>[ 984.123517] task:image_burner state:D stack:0 pid:11900 ppid:11893 flags:0x00004002
<6>[ 984.123577] Call Trace:
<6>[ 984.123603] <TASK>
<6>[ 984.123659] __schedule+0x5e8/0x14c0
<6>[ 984.123688] ? free_unref_page_list+0x25d/0x290
<6>[ 984.123715] ? lru_gen_update_size+0x1e3/0x220
<6>[ 984.123763] schedule+0x5e/0xa0
<6>[ 984.123788] io_schedule+0x47/0x70
<6>[ 984.123814] folio_wait_bit_common+0x18a/0x270
<6>[ 984.123863] ? __pfx_wake_page_function+0x10/0x10
<6>[ 984.123889] folio_wait_writeback+0x35/0x90
<6>[ 984.123937] __filemap_fdatawait_range+0x162/0x190
<6>[ 984.123965] file_write_and_wait_range+0xa3/0x120
<6>[ 984.124013] blkdev_fsync+0x39/0x60
<6>[ 984.124040] __x64_sys_fdatasync+0x4c/0x90
<6>[ 984.124067] do_syscall_64+0x6b/0xa0
next prev parent reply other threads:[~2026-07-02 2:25 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-01 4:03 [RFC PATCH] usb: storage: uas: limit consecutive device resets in error handling Sergey Senozhatsky
2026-07-01 5:38 ` Greg KH
2026-07-01 5:57 ` Sergey Senozhatsky
2026-07-01 6:01 ` Sergey Senozhatsky
2026-07-01 8:28 ` [usb-storage] " Oliver Neukum
2026-07-02 2:25 ` Sergey Senozhatsky [this message]
2026-07-02 8:08 ` Oliver Neukum
2026-07-02 8:21 ` Sergey Senozhatsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=akXJuqvHLUpcjXIv@google.com \
--to=senozhatsky@chromium.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=oneukum@suse.com \
--cc=stern@rowland.harvard.edu \
--cc=tfiga@chromium.org \
--cc=usb-storage@lists.one-eyed-alien.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox