[RFC PATCH] usb: storage: uas: limit consecutive device resets in error handling

[RFC PATCH] usb: storage: uas: limit consecutive device resets in error handling

[Sergey Senozhatsky]

When a UAS storage device experiences persistent wire or hardware IO
failures, commands time out and the SCSI error handler thread invokes
uas_eh_device_reset_handler().  If usb_reset_device() succeeds at the
USB hub level but the underlying drive remains unresponsive, the reset
handler returns SUCCESS. SCSI EH then requeues pending commands with
DID_RESET (ACTION_RETRY), causing them to time out again 30 seconds
later in an infinite loop.  This blocks block layer queues indefinitely:

[..]
 sd 0:0:0:0: [sda] tag#4 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD
 sd 0:0:0:0: [sda] tag#4 CDB: Write(10) 2a 00 00 d3 98 08 00 04 00 00
 sd 0:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT
 sd 0:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 00 d3 9c 08 00 04 00 00
 scsi host0: uas_eh_device_reset_handler start
 usb 2-1.3: reset SuperSpeed Plus Gen 2x1 USB device number 4 using xhci_hcd
 scsi host0: uas_eh_device_reset_handler success
 sd 0:0:0:0: [sda] tag#3 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD IN
 sd 0:0:0:0: [sda] tag#3 CDB: Read(10) 28 00 00 00 00 00 00 00 20 00
 scsi host0: uas_eh_device_reset_handler start
 sd 0:0:0:0: [sda] tag#1 uas_zap_pending 0 uas-tag 1 inflight: CMD
 sd 0:0:0:0: [sda] tag#1 CDB: Write(10) 2a 00 00 d3 98 08 00 04 00 00
 sd 0:0:0:0: [sda] tag#2 uas_zap_pending 0 uas-tag 2 inflight: CMD
 sd 0:0:0:0: [sda] tag#2 CDB: Write(10) 2a 00 00 d3 9c 08 00 04 00 00
 usb 2-1.3: reset SuperSpeed Plus Gen 2x1 USB device number 4 using xhci_hcd
 scsi host0: uas_eh_device_reset_handler success
[..]

Introduce a runtime-configurable module parameter 'reset_limit' (default
3) and track consecutive resets in devinfo->reset_cnt.  When a productive
block layer command completes successfully (SUBMITTED_BY_BLOCK_LAYER),
reset the counter to zero.  If consecutive resets exceed reset_limit,
abort the loop by completing pending commands with DID_NO_CONNECT and
returning FAILED.  This allows SCSI EH to offline the unresponsive
device.

Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
---
 drivers/usb/storage/uas.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index 265162981269..a63c66c8bbad 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -32,6 +32,10 @@
 
 #define MAX_CMNDS 256
 
+static int uas_reset_limit = 3;
+module_param_named(reset_limit, uas_reset_limit, int, 0644);
+MODULE_PARM_DESC(reset_limit, "Maximum number of consecutive device resets during error handling before failing");
+
 struct uas_dev_info {
 	struct usb_interface *intf;
 	struct usb_device *udev;
@@ -40,6 +44,7 @@ struct uas_dev_info {
 	struct usb_anchor data_urbs;
 	u64 flags;
 	int qdepth, resetting;
+	int reset_cnt;
 	unsigned cmd_pipe, status_pipe, data_in_pipe, data_out_pipe;
 	unsigned use_streams:1;
 	unsigned shutdown:1;
@@ -255,6 +260,8 @@ static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller)
 		return -EBUSY;
 	devinfo->cmnd[cmdinfo->uas_tag - 1] = NULL;
 	uas_free_unsubmitted_urbs(cmnd);
+	if (cmnd->result == 0 && cmnd->submitter == SUBMITTED_BY_BLOCK_LAYER)
+		devinfo->reset_cnt = 0;
 	scsi_done(cmnd);
 	return 0;
 }
@@ -796,6 +803,21 @@ static int uas_eh_host_reset_handler(struct scsi_cmnd *cmnd)
 	usb_kill_anchored_urbs(&devinfo->cmd_urbs);
 	usb_kill_anchored_urbs(&devinfo->sense_urbs);
 	usb_kill_anchored_urbs(&devinfo->data_urbs);
+
+	spin_lock_irqsave(&devinfo->lock, flags);
+	if (uas_reset_limit > 0 && devinfo->reset_cnt >= uas_reset_limit) {
+		devinfo->resetting = 0;
+		spin_unlock_irqrestore(&devinfo->lock, flags);
+		uas_zap_pending(devinfo, DID_NO_CONNECT);
+		usb_unlock_device(udev);
+		shost_printk(KERN_ERR, sdev->host,
+			     "%s FAILED reset limit %d exceeded\n",
+			     __func__, uas_reset_limit);
+		return FAILED;
+	}
+	devinfo->reset_cnt++;
+	spin_unlock_irqrestore(&devinfo->lock, flags);
+
 	uas_zap_pending(devinfo, DID_RESET);
 
 	err = usb_reset_device(udev);
-- 
2.55.0.795.g602f6c329a-goog

Re: [RFC PATCH] usb: storage: uas: limit consecutive device resets in error handling

[Greg KH]

On Wed, Jul 01, 2026 at 01:03:21PM +0900, Sergey Senozhatsky wrote:
> When a UAS storage device experiences persistent wire or hardware IO
> failures, commands time out and the SCSI error handler thread invokes
> uas_eh_device_reset_handler().  If usb_reset_device() succeeds at the
> USB hub level but the underlying drive remains unresponsive, the reset
> handler returns SUCCESS. SCSI EH then requeues pending commands with
> DID_RESET (ACTION_RETRY), causing them to time out again 30 seconds
> later in an infinite loop.  This blocks block layer queues indefinitely:
> 
> [..]
>  sd 0:0:0:0: [sda] tag#4 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD
>  sd 0:0:0:0: [sda] tag#4 CDB: Write(10) 2a 00 00 d3 98 08 00 04 00 00
>  sd 0:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT
>  sd 0:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 00 d3 9c 08 00 04 00 00
>  scsi host0: uas_eh_device_reset_handler start
>  usb 2-1.3: reset SuperSpeed Plus Gen 2x1 USB device number 4 using xhci_hcd
>  scsi host0: uas_eh_device_reset_handler success
>  sd 0:0:0:0: [sda] tag#3 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD IN
>  sd 0:0:0:0: [sda] tag#3 CDB: Read(10) 28 00 00 00 00 00 00 00 20 00
>  scsi host0: uas_eh_device_reset_handler start
>  sd 0:0:0:0: [sda] tag#1 uas_zap_pending 0 uas-tag 1 inflight: CMD
>  sd 0:0:0:0: [sda] tag#1 CDB: Write(10) 2a 00 00 d3 98 08 00 04 00 00
>  sd 0:0:0:0: [sda] tag#2 uas_zap_pending 0 uas-tag 2 inflight: CMD
>  sd 0:0:0:0: [sda] tag#2 CDB: Write(10) 2a 00 00 d3 9c 08 00 04 00 00
>  usb 2-1.3: reset SuperSpeed Plus Gen 2x1 USB device number 4 using xhci_hcd
>  scsi host0: uas_eh_device_reset_handler success
> [..]
> 
> Introduce a runtime-configurable module parameter 'reset_limit' (default
> 3) and track consecutive resets in devinfo->reset_cnt.  When a productive
> block layer command completes successfully (SUBMITTED_BY_BLOCK_LAYER),
> reset the counter to zero.  If consecutive resets exceed reset_limit,
> abort the loop by completing pending commands with DID_NO_CONNECT and
> returning FAILED.  This allows SCSI EH to offline the unresponsive
> device.
> 
> Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
> ---
>  drivers/usb/storage/uas.c | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
> index 265162981269..a63c66c8bbad 100644
> --- a/drivers/usb/storage/uas.c
> +++ b/drivers/usb/storage/uas.c
> @@ -32,6 +32,10 @@
>  
>  #define MAX_CMNDS 256
>  
> +static int uas_reset_limit = 3;
> +module_param_named(reset_limit, uas_reset_limit, int, 0644);
> +MODULE_PARM_DESC(reset_limit, "Maximum number of consecutive device resets during error handling before failing");

This is not the 1990's, we do not add module parameters for issues that
should be properly solved either automatically, or on a per-device
basis.

There's no way that ChromeOs wants to attempt to track this module
parameter as a bootline config option, right?

thanks,

greg k-h

Re: [RFC PATCH] usb: storage: uas: limit consecutive device resets in error handling

[Sergey Senozhatsky]

On (26/07/01 07:38), Greg KH wrote:
> > +static int uas_reset_limit = 3;

This obviously wanted to be 0 by default (just a side note).

> > +module_param_named(reset_limit, uas_reset_limit, int, 0644);
> > +MODULE_PARM_DESC(reset_limit, "Maximum number of consecutive device resets during error handling before failing");
> 
> This is not the 1990's, we do not add module parameters for issues that
> should be properly solved either automatically, or on a per-device
> basis.
> 
> There's no way that ChromeOs wants to attempt to track this module
> parameter as a bootline config option, right?

Can you please elaborate on "properly solved either automatically,
or on a per-device basis".  I don't know how to break that endless
reset loop otherwise.  I'm open to any suggestions, the patch is RFC
for a reason.

That reset loop essentially panics the system (we have hung-task watchdog
and hung-task panic enabled).  The kernel does uas_eh_device_reset_handler()
every 30 seconds (which succeeds), while the block layer doesn't make progress
and keeps the tasks blocked, which eventually triggers the watchdog:

[..]
<6>[ 917.070222] sd 0:0:0:0: [sda] tag#3 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD IN
<6>[ 917.070318] sd 0:0:0:0: [sda] tag#3 CDB: Read(10) 28 00 00 00 00 00 00 00 20 00
<6>[ 917.079434] scsi host0: uas_eh_device_reset_handler start
<6>[ 917.079994] sd 0:0:0:0: [sda] tag#1 uas_zap_pending 0 uas-tag 1 inflight: CMD
<6>[ 917.080046] sd 0:0:0:0: [sda] tag#1 CDB: Write(10) 2a 00 00 d3 98 08 00 04 00 00
<6>[ 917.080072] sd 0:0:0:0: [sda] tag#2 uas_zap_pending 0 uas-tag 2 inflight: CMD
<6>[ 917.080118] sd 0:0:0:0: [sda] tag#2 CDB: Write(10) 2a 00 00 d3 9c 08 00 04 00 00
<6>[ 917.145714] usb 2-1.3: reset SuperSpeed Plus Gen 2x1 USB device number 4 using xhci_hcd
<6>[ 917.164988] scsi host0: uas_eh_device_reset_handler success
<6>[ 917.165155] sd 0:0:0:0: [sda] tag#3 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=30s
<6>[ 917.165210] sd 0:0:0:0: [sda] tag#3 CDB: Read(10) 28 00 00 00 00 00 00 00 20 00
<3>[ 917.165239] I/O error, dev sda, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 3
<4>[ 934.971114] rq: tag=0 hctx=0 op=WRITE sector=13867016 len=524288 age=78231 ms pid=11900 comm=image_burner state=D
<4>[ 934.971169] rq: tag=1 hctx=0 op=WRITE sector=13868040 len=524288 age=78230 ms pid=11900 comm=image_burner state=D
<4>[ 934.971217] blk: queue stall on sda: 3 inflight, 2 stalled (threshold 60000 ms)
<6>[ 947.276222] sd 0:0:0:0: [sda] tag#3 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD IN
<6>[ 947.276282] sd 0:0:0:0: [sda] tag#3 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
<6>[ 947.280489] scsi host0: uas_eh_device_reset_handler start
<6>[ 947.281255] sd 0:0:0:0: [sda] tag#0 uas_zap_pending 0 uas-tag 1 inflight: CMD
<6>[ 947.281309] sd 0:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 00 d3 98 08 00 04 00 00
<6>[ 947.281391] sd 0:0:0:0: [sda] tag#1 uas_zap_pending 0 uas-tag 2 inflight: CMD
<6>[ 947.281468] sd 0:0:0:0: [sda] tag#1 CDB: Write(10) 2a 00 00 d3 9c 08 00 04 00 00
<6>[ 947.346666] usb 2-1.3: reset SuperSpeed Plus Gen 2x1 USB device number 4 using xhci_hcd
<6>[ 947.365031] scsi host0: uas_eh_device_reset_handler success
<6>[ 977.479406] scsi host0: uas_eh_device_reset_handler start
<6>[ 977.479963] sd 0:0:0:0: [sda] tag#2 uas_zap_pending 0 uas-tag 1 inflight: CMD
<6>[ 977.480015] sd 0:0:0:0: [sda] tag#2 CDB: Write(10) 2a 00 00 d3 98 08 00 04 00 00
<6>[ 977.480042] sd 0:0:0:0: [sda] tag#3 uas_zap_pending 0 uas-tag 2 inflight: CMD
<6>[ 977.480089] sd 0:0:0:0: [sda] tag#3 CDB: Write(10) 2a 00 00 d3 9c 08 00 04 00 00
<6>[ 977.480137] sd 0:0:0:0: [sda] tag#4 uas_zap_pending 0 uas-tag 3 inflight: CMD
<6>[ 977.480166] sd 0:0:0:0: [sda] tag#4 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
<6>[ 977.545653] usb 2-1.3: reset SuperSpeed Plus Gen 2x1 USB device number 4 using xhci_hcd
<6>[ 977.565338] scsi host0: uas_eh_device_reset_handler success
<3>[ 984.123394] INFO: task image_burner:11900 blocked for more than 122 seconds.
<3>[ 984.123501] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
<6>[ 984.123517] task:image_burner state:D stack:0 pid:11900 ppid:11893 flags:0x00004002
<6>[ 984.123577] Call Trace:
<6>[ 984.123603] <TASK>
<6>[ 984.123659] __schedule+0x5e8/0x14c0
<6>[ 984.123688] ? free_unref_page_list+0x25d/0x290
<6>[ 984.123715] ? lru_gen_update_size+0x1e3/0x220
<6>[ 984.123763] schedule+0x5e/0xa0
<6>[ 984.123788] io_schedule+0x47/0x70
<6>[ 984.123814] folio_wait_bit_common+0x18a/0x270
<6>[ 984.123863] ? __pfx_wake_page_function+0x10/0x10
<6>[ 984.123889] folio_wait_writeback+0x35/0x90
<6>[ 984.123937] __filemap_fdatawait_range+0x162/0x190
<6>[ 984.123965] file_write_and_wait_range+0xa3/0x120
<6>[ 984.124013] blkdev_fsync+0x39/0x60
<6>[ 984.124040] __x64_sys_fdatasync+0x4c/0x90
<6>[ 984.124067] do_syscall_64+0x6b/0xa0

Re: [RFC PATCH] usb: storage: uas: limit consecutive device resets in error handling

[Sergey Senozhatsky]

On (26/07/01 14:57), Sergey Senozhatsky wrote:
> On (26/07/01 07:38), Greg KH wrote:
> > > +static int uas_reset_limit = 3;
> 
> This obviously wanted to be 0 by default (just a side note).
> 
> > > +module_param_named(reset_limit, uas_reset_limit, int, 0644);
> > > +MODULE_PARM_DESC(reset_limit, "Maximum number of consecutive device resets during error handling before failing");
> > 
> > This is not the 1990's, we do not add module parameters for issues that
> > should be properly solved either automatically, or on a per-device
> > basis.
> > 
> > There's no way that ChromeOs wants to attempt to track this module
> > parameter as a bootline config option, right?
> 
> Can you please elaborate on "properly solved either automatically,
> or on a per-device basis".  I don't know how to break that endless
> reset loop otherwise.  I'm open to any suggestions, the patch is RFC
> for a reason.

I can imagine uas_reset_limit being auto-calculated based on SCSI
timeout (30 seconds) and HUNG_TASK_TIMEOUT (if set).  Will that
work?  I don't know if all those timeouts can be clearly exposed
to the UAS driver (or should they be in the first place).

Re: [usb-storage] [RFC PATCH] usb: storage: uas: limit consecutive device resets in error handling

[Oliver Neukum]

On 01.07.26 06:03, Sergey Senozhatsky wrote:
> When a UAS storage device experiences persistent wire or hardware IO
> failures, commands time out and the SCSI error handler thread invokes
> uas_eh_device_reset_handler().  If usb_reset_device() succeeds at the
> USB hub level but the underlying drive remains unresponsive, the reset

What exactly do you mean by unresponsive? Usbcore must at least
reassign the configuration (and the device address).

> handler returns SUCCESS. SCSI EH then requeues pending commands with
> DID_RESET (ACTION_RETRY), causing them to time out again 30 seconds
> later in an infinite loop.  This blocks block layer queues indefinitely:

Arguably this is a SCSI issue, not a UAS issue, but anyway.
[..]

> Introduce a runtime-configurable module parameter 'reset_limit' (default
> 3) and track consecutive resets in devinfo->reset_cnt.  When a productive
> block layer command completes successfully (SUBMITTED_BY_BLOCK_LAYER),
> reset the counter to zero.  If consecutive resets exceed reset_limit,
> abort the loop by completing pending commands with DID_NO_CONNECT and
> returning FAILED.  This allows SCSI EH to offline the unresponsive
> device.

Let us take a step back. What is the issue here? The device goes
into error handling. That is not a problem as such. A method
designed to remedy an error condition has not been effective but seems
to succeed.
That must not happen. So what do we do? It seems to me like we
ought to add a test for the effectiveness of the reset.
At first glance it looks like UAS should do a TEST UNIT READY
on its own after a reset.
Or are we looking at a command that reliably crashes the device and
is reissued by an upper layer? In that case either we need
a quirk or the SCSI layer ought to deduce that it is using commands
it shouldn't use.

Can we have more information about the scenario that triggered
the desire for this patch?

	Regards
		Oliver

Re: [usb-storage] [RFC PATCH] usb: storage: uas: limit consecutive device resets in error handling

[Sergey Senozhatsky]

On (26/07/01 10:28), Oliver Neukum wrote:
> On 01.07.26 06:03, Sergey Senozhatsky wrote:
> > When a UAS storage device experiences persistent wire or hardware IO
> > failures, commands time out and the SCSI error handler thread invokes
> > uas_eh_device_reset_handler().  If usb_reset_device() succeeds at the
> > USB hub level but the underlying drive remains unresponsive, the reset
> 
> What exactly do you mean by unresponsive? Usbcore must at least
> reassign the configuration (and the device address).

I might be using a wrong term, sorry about that, what we see is that
USB reports successful resets, but the device still cannot handle
data writes, requests stall.

[..]
> > Introduce a runtime-configurable module parameter 'reset_limit' (default
> > 3) and track consecutive resets in devinfo->reset_cnt.  When a productive
> > block layer command completes successfully (SUBMITTED_BY_BLOCK_LAYER),
> > reset the counter to zero.  If consecutive resets exceed reset_limit,
> > abort the loop by completing pending commands with DID_NO_CONNECT and
> > returning FAILED.  This allows SCSI EH to offline the unresponsive
> > device.
> 
> Let us take a step back. What is the issue here? The device goes
> into error handling. That is not a problem as such. A method
> designed to remedy an error condition has not been effective but seems
> to succeed.
> That must not happen. So what do we do? It seems to me like we
> ought to add a test for the effectiveness of the reset.
> At first glance it looks like UAS should do a TEST UNIT READY
> on its own after a reset.
> Or are we looking at a command that reliably crashes the device and
> is reissued by an upper layer? In that case either we need
> a quirk or the SCSI layer ought to deduce that it is using commands
> it shouldn't use.
> 
> Can we have more information about the scenario that triggered
> the desire for this patch?

Unfortunately, I cannot add a lot of info, as I don't posses (nor
have access to) the device in question.  The user is on 6.6 LTS
kernel (UAS code wise there doesn't seem to be that much of a
difference compared to mainline).  I suppose the misbehaving UAS
device is:

<6>[ 11.902842] usb 2-1.3: New USB device found, idVendor=2109, idProduct=0715, bcdDevice= 2.63
<6>[ 11.902968] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=(Serial: 6)
<6>[ 11.902994] usb 2-1.3: Product: SSK USB3.2 SSD Flash Drive
<6>[ 11.903041] usb 2-1.3: Manufacturer: SSK Corporation
<6>[ 11.903066] usb 2-1.3: SerialNumber: (Serial: 11)
<6>[ 11.909223] scsi host0: uas
<5>[ 11.919288] scsi 0:0:0:0: Direct-Access SSK Port able SSD 256 X082 PQ: 0 ANSI: 6
<5>[ 11.928062] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
<5>[ 11.928336] sd 0:0:0:0: [sda] Write Protect is off
<7>[ 11.928377] sd 0:0:0:0: [sda] Mode Sense: 2f 00 00 00
<5>[ 11.929521] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[ 11.956480] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
<4>[ 11.956515] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)

And then all I have is dmesg (ramoops).

(don't get confused by "rq: tag=.. op=..." lines, they are from  our downstream
blk-mq stall watchdog)

Cut and paste from the first time UAS reports an error:

<6>[ 704.586138] sd 0:0:0:0: [sda] tag#5 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD OUT
<6>[ 704.586217] sd 0:0:0:0: [sda] tag#5 CDB: Write(10) 2a 00 00 d3 94 08 00 04 00 00
<6>[ 704.687269] sd 0:0:0:0: [sda] tag#4 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD OUT
<6>[ 704.687356] sd 0:0:0:0: [sda] tag#4 CDB: Write(10) 2a 00 00 d3 8c 08 00 04 00 00
<6>[ 704.693877] sd 0:0:0:0: [sda] tag#3 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD OUT
<6>[ 704.693947] sd 0:0:0:0: [sda] tag#3 CDB: Write(10) 2a 00 00 d3 88 08 00 04 00 00
<6>[ 704.700914] sd 0:0:0:0: [sda] tag#2 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT
<6>[ 704.700963] sd 0:0:0:0: [sda] tag#2 CDB: Write(10) 2a 00 00 d3 84 08 00 04 00 00
<6>[ 704.707981] sd 0:0:0:0: [sda] tag#1 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT
<6>[ 704.708053] sd 0:0:0:0: [sda] tag#1 CDB: Write(10) 2a 00 00 d3 80 08 00 04 00 00
<6>[ 704.714947] sd 0:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD OUT
<6>[ 704.715019] sd 0:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 00 d3 90 08 00 04 00 00
<6>[ 704.730668] scsi host0: uas_eh_device_reset_handler start
<6>[ 704.797633] usb 2-1.3: reset SuperSpeed Plus Gen 2x1 USB device number 4 using xhci_hcd
<6>[ 704.817713] scsi host0: uas_eh_device_reset_handler success
<6>[ 735.309699] scsi host0: uas_eh_device_reset_handler start
<6>[ 735.310945] sd 0:0:0:0: [sda] tag#2 uas_zap_pending 0 uas-tag 1 inflight: CMD
<6>[ 735.311018] sd 0:0:0:0: [sda] tag#2 CDB: Write(10) 2a 00 00 d3 94 08 00 04 00 00
<6>[ 735.311057] sd 0:0:0:0: [sda] tag#3 uas_zap_pending 0 uas-tag 2 inflight: CMD
<6>[ 735.311122] sd 0:0:0:0: [sda] tag#3 CDB: Write(10) 2a 00 00 d3 8c 08 00 04 00 00
<6>[ 735.311188] sd 0:0:0:0: [sda] tag#4 uas_zap_pending 0 uas-tag 3 inflight: CMD
<6>[ 735.311224] sd 0:0:0:0: [sda] tag#4 CDB: Write(10) 2a 00 00 d3 88 08 00 04 00 00
<6>[ 735.311289] sd 0:0:0:0: [sda] tag#0 uas_zap_pending 0 uas-tag 4 inflight: CMD
<6>[ 735.311354] sd 0:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 00 d3 84 08 00 04 00 00
<6>[ 735.311390] sd 0:0:0:0: [sda] tag#1 uas_zap_pending 0 uas-tag 5 inflight: CMD
<6>[ 735.311455] sd 0:0:0:0: [sda] tag#1 CDB: Write(10) 2a 00 00 d3 80 08 00 04 00 00
<6>[ 735.311521] sd 0:0:0:0: [sda] tag#5 uas_zap_pending 0 uas-tag 6 inflight: CMD
<6>[ 735.311558] sd 0:0:0:0: [sda] tag#5 CDB: Write(10) 2a 00 00 d3 90 08 00 04 00 00
<6>[ 735.377751] usb 2-1.3: reset SuperSpeed Plus Gen 2x1 USB device number 4 using xhci_hcd
<6>[ 735.398693] scsi host0: uas_eh_device_reset_handler success
<4>[ 750.651133] rq: tag=0 hctx=0 op=WRITE sector=13860872 len=524288 age=76536 ms pid=11900 comm=image_burner state=D
<4>[ 750.651205] rq: tag=1 hctx=0 op=WRITE sector=13865992 len=524288 age=76536 ms pid=11900 comm=image_burner state=D
<4>[ 750.651263] rq: tag=2 hctx=0 op=WRITE sector=13863944 len=524288 age=76536 ms pid=11900 comm=image_burner state=D
<4>[ 750.651320] rq: tag=3 hctx=0 op=WRITE sector=13862920 len=524288 age=76536 ms pid=11900 comm=image_burner state=D
<4>[ 750.651379] rq: tag=4 hctx=0 op=WRITE sector=13861896 len=524288 age=76536 ms pid=11900 comm=image_burner state=D
<4>[ 750.651437] rq: tag=5 hctx=0 op=WRITE sector=13864968 len=524288 age=76536 ms pid=11900 comm=image_burner state=D
<4>[ 750.651494] blk: queue stall on sda: 6 inflight, 6 stalled (threshold 60000 ms)
<6>[ 765.511365] scsi host0: uas_eh_device_reset_handler start
<6>[ 765.512640] sd 0:0:0:0: [sda] tag#4 uas_zap_pending 0 uas-tag 1 inflight: CMD
<6>[ 765.512689] sd 0:0:0:0: [sda] tag#4 CDB: Write(10) 2a 00 00 d3 84 08 00 04 00 00
<6>[ 765.512737] sd 0:0:0:0: [sda] tag#0 uas_zap_pending 0 uas-tag 2 inflight: CMD
<6>[ 765.512762] sd 0:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 00 d3 80 08 00 04 00 00
<6>[ 765.512808] sd 0:0:0:0: [sda] tag#1 uas_zap_pending 0 uas-tag 3 inflight: CMD
<6>[ 765.512855] sd 0:0:0:0: [sda] tag#1 CDB: Write(10) 2a 00 00 d3 94 08 00 04 00 00
<6>[ 765.512880] sd 0:0:0:0: [sda] tag#2 uas_zap_pending 0 uas-tag 4 inflight: CMD
<6>[ 765.512927] sd 0:0:0:0: [sda] tag#2 CDB: Write(10) 2a 00 00 d3 8c 08 00 04 00 00
<6>[ 765.512974] sd 0:0:0:0: [sda] tag#3 uas_zap_pending 0 uas-tag 5 inflight: CMD
<6>[ 765.513000] sd 0:0:0:0: [sda] tag#3 CDB: Write(10) 2a 00 00 d3 88 08 00 04 00 00
<6>[ 765.513047] sd 0:0:0:0: [sda] tag#5 uas_zap_pending 0 uas-tag 6 inflight: CMD
<6>[ 765.513094] sd 0:0:0:0: [sda] tag#5 CDB: Write(10) 2a 00 00 d3 90 08 00 04 00 00
<6>[ 765.577456] usb 2-1.3: reset SuperSpeed Plus Gen 2x1 USB device number 4 using xhci_hcd
<6>[ 765.597265] scsi host0: uas_eh_device_reset_handler success
<6>[ 795.719449] scsi host0: uas_eh_device_reset_handler start
<6>[ 795.720700] sd 0:0:0:0: [sda] tag#4 uas_zap_pending 0 uas-tag 1 inflight: CMD
<6>[ 795.720752] sd 0:0:0:0: [sda] tag#4 CDB: Write(10) 2a 00 00 d3 80 08 00 04 00 00
<6>[ 795.720778] sd 0:0:0:0: [sda] tag#0 uas_zap_pending 0 uas-tag 2 inflight: CMD
<6>[ 795.720826] sd 0:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 00 d3 94 08 00 04 00 00
<6>[ 795.720872] sd 0:0:0:0: [sda] tag#1 uas_zap_pending 0 uas-tag 3 inflight: CMD
<6>[ 795.720897] sd 0:0:0:0: [sda] tag#1 CDB: Write(10) 2a 00 00 d3 8c 08 00 04 00 00
<6>[ 795.720944] sd 0:0:0:0: [sda] tag#2 uas_zap_pending 0 uas-tag 4 inflight: CMD
<6>[ 795.720990] sd 0:0:0:0: [sda] tag#2 CDB: Write(10) 2a 00 00 d3 88 08 00 04 00 00
<6>[ 795.721016] sd 0:0:0:0: [sda] tag#3 uas_zap_pending 0 uas-tag 5 inflight: CMD
<6>[ 795.721062] sd 0:0:0:0: [sda] tag#3 CDB: Write(10) 2a 00 00 d3 84 08 00 04 00 00
<6>[ 795.721109] sd 0:0:0:0: [sda] tag#5 uas_zap_pending 0 uas-tag 6 inflight: CMD
<6>[ 795.721135] sd 0:0:0:0: [sda] tag#5 CDB: Write(10) 2a 00 00 d3 90 08 00 04 00 00
<6>[ 796.007591] usb 2-1.3: reset SuperSpeed Plus Gen 2x1 USB device number 4 using xhci_hcd
<6>[ 796.027767] scsi host0: uas_eh_device_reset_handler success
<4>[ 812.091136] rq: tag=0 hctx=0 op=WRITE sector=13863944 len=524288 age=137976 ms pid=11900 comm=image_burner state=D
<4>[ 812.091194] rq: tag=1 hctx=0 op=WRITE sector=13862920 len=524288 age=137976 ms pid=11900 comm=image_burner state=D
<4>[ 812.091242] rq: tag=2 hctx=0 op=WRITE sector=13861896 len=524288 age=137976 ms pid=11900 comm=image_burner state=D
<4>[ 812.091289] rq: tag=3 hctx=0 op=WRITE sector=13860872 len=524288 age=137976 ms pid=11900 comm=image_burner state=D
<4>[ 812.091335] rq: tag=4 hctx=0 op=WRITE sector=13865992 len=524288 age=137976 ms pid=11900 comm=image_burner state=D
<4>[ 812.091381] rq: tag=5 hctx=0 op=WRITE sector=13864968 len=524288 age=137976 ms pid=11900 comm=image_burner state=D
<4>[ 812.091428] blk: queue stall on sda: 6 inflight, 6 stalled (threshold 60000 ms)
<6>[ 826.435375] scsi host0: uas_eh_device_reset_handler start
<6>[ 826.436559] sd 0:0:0:0: [sda] tag#4 uas_zap_pending 0 uas-tag 1 inflight: CMD
<6>[ 826.436619] sd 0:0:0:0: [sda] tag#4 CDB: Write(10) 2a 00 00 d3 94 08 00 04 00 00
<6>[ 826.436679] sd 0:0:0:0: [sda] tag#0 uas_zap_pending 0 uas-tag 2 inflight: CMD
<6>[ 826.436710] sd 0:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 00 d3 8c 08 00 04 00 00
<6>[ 826.436758] sd 0:0:0:0: [sda] tag#1 uas_zap_pending 0 uas-tag 3 inflight: CMD
<6>[ 826.436807] sd 0:0:0:0: [sda] tag#1 CDB: Write(10) 2a 00 00 d3 88 08 00 04 00 00
<6>[ 826.436834] sd 0:0:0:0: [sda] tag#2 uas_zap_pending 0 uas-tag 4 inflight: CMD
<6>[ 826.436884] sd 0:0:0:0: [sda] tag#2 CDB: Write(10) 2a 00 00 d3 84 08 00 04 00 00
<6>[ 826.436933] sd 0:0:0:0: [sda] tag#3 uas_zap_pending 0 uas-tag 5 inflight: CMD
<6>[ 826.436960] sd 0:0:0:0: [sda] tag#3 CDB: Write(10) 2a 00 00 d3 80 08 00 04 00 00
<6>[ 826.437008] sd 0:0:0:0: [sda] tag#5 uas_zap_pending 0 uas-tag 6 inflight: CMD
<6>[ 826.437056] sd 0:0:0:0: [sda] tag#5 CDB: Write(10) 2a 00 00 d3 90 08 00 04 00 00
<6>[ 826.502749] usb 2-1.3: reset SuperSpeed Plus Gen 2x1 USB device number 4 using xhci_hcd
<6>[ 826.521493] scsi host0: uas_eh_device_reset_handler success
<6>[ 856.652469] scsi host0: uas_eh_device_reset_handler start
<6>[ 856.653458] sd 0:0:0:0: [sda] tag#2 uas_zap_pending 0 uas-tag 1 inflight: CMD
<6>[ 856.653535] sd 0:0:0:0: [sda] tag#2 CDB: Write(10) 2a 00 00 d3 8c 08 00 04 00 00
<6>[ 856.653574] sd 0:0:0:0: [sda] tag#3 uas_zap_pending 0 uas-tag 2 inflight: CMD
<6>[ 856.653640] sd 0:0:0:0: [sda] tag#3 CDB: Write(10) 2a 00 00 d3 88 08 00 04 00 00
<6>[ 856.653706] sd 0:0:0:0: [sda] tag#4 uas_zap_pending 0 uas-tag 3 inflight: CMD
<6>[ 856.653741] sd 0:0:0:0: [sda] tag#4 CDB: Write(10) 2a 00 00 d3 84 08 00 04 00 00
<6>[ 856.653804] sd 0:0:0:0: [sda] tag#0 uas_zap_pending 0 uas-tag 4 inflight: CMD
<6>[ 856.653867] sd 0:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 00 d3 80 08 00 04 00 00
<6>[ 856.653902] sd 0:0:0:0: [sda] tag#1 uas_zap_pending 0 uas-tag 5 inflight: CMD
<6>[ 856.653965] sd 0:0:0:0: [sda] tag#1 CDB: Write(10) 2a 00 00 d3 94 08 00 04 00 00
<6>[ 856.654029] sd 0:0:0:0: [sda] tag#5 uas_zap_pending 0 uas-tag 6 inflight: CMD
<6>[ 856.654064] sd 0:0:0:0: [sda] tag#5 CDB: Write(10) 2a 00 00 d3 90 08 00 04 00 00
<6>[ 856.718609] usb 2-1.3: reset SuperSpeed Plus Gen 2x1 USB device number 4 using xhci_hcd
<6>[ 856.738743] scsi host0: uas_eh_device_reset_handler success
<3>[ 856.738939] sd 0:0:0:0: [sda] tag#0 timing out command, waited 180s
<6>[ 856.738999] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_RESET driverbyte=DRIVER_OK cmd_age=182s
<6>[ 856.739056] sd 0:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 00 d3 80 08 00 04 00 00
<3>[ 856.739119] I/O error, dev sda, sector 13860872 op 0x1:(WRITE) flags 0x4800 phys_seg 128 prio class 2
<3>[ 856.739155] Buffer I/O error on dev sda, logical block 1732609, lost async page write
<3>[ 856.739219] Buffer I/O error on dev sda, logical block 1732610, lost async page write
<3>[ 856.739272] Buffer I/O error on dev sda, logical block 1732611, lost async page write
<3>[ 856.739323] Buffer I/O error on dev sda, logical block 1732612, lost async page write
<3>[ 856.739354] Buffer I/O error on dev sda, logical block 1732613, lost async page write
<3>[ 856.739410] Buffer I/O error on dev sda, logical block 1732614, lost async page write
<3>[ 856.739466] Buffer I/O error on dev sda, logical block 1732615, lost async page write
<3>[ 856.739522] Buffer I/O error on dev sda, logical block 1732616, lost async page write
<3>[ 856.739553] Buffer I/O error on dev sda, logical block 1732617, lost async page write
<3>[ 856.739607] Buffer I/O error on dev sda, logical block 1732618, lost async page write
<3>[ 856.739764] sd 0:0:0:0: [sda] tag#1 timing out command, waited 180s
<6>[ 856.739796] sd 0:0:0:0: [sda] tag#1 FAILED Result: hostbyte=DID_RESET driverbyte=DRIVER_OK cmd_age=182s
<6>[ 856.739852] sd 0:0:0:0: [sda] tag#1 CDB: Write(10) 2a 00 00 d3 94 08 00 04 00 00
<3>[ 856.739907] I/O error, dev sda, sector 13865992 op 0x1:(WRITE) flags 0x4800 phys_seg 128 prio class 2
<3>[ 856.740068] sd 0:0:0:0: [sda] tag#2 timing out command, waited 180s
<6>[ 856.740099] sd 0:0:0:0: [sda] tag#2 FAILED Result: hostbyte=DID_RESET driverbyte=DRIVER_OK cmd_age=182s
<6>[ 856.740154] sd 0:0:0:0: [sda] tag#2 CDB: Write(10) 2a 00 00 d3 8c 08 00 04 00 00
<3>[ 856.740200] I/O error, dev sda, sector 13863944 op 0x1:(WRITE) flags 0x4800 phys_seg 128 prio class 2
<3>[ 856.740310] sd 0:0:0:0: [sda] tag#3 timing out command, waited 180s
<6>[ 856.740338] sd 0:0:0:0: [sda] tag#3 FAILED Result: hostbyte=DID_RESET driverbyte=DRIVER_OK cmd_age=182s
<6>[ 856.740385] sd 0:0:0:0: [sda] tag#3 CDB: Write(10) 2a 00 00 d3 88 08 00 04 00 00
<3>[ 856.740431] I/O error, dev sda, sector 13862920 op 0x1:(WRITE) flags 0x4800 phys_seg 128 prio class 2
<3>[ 856.740532] sd 0:0:0:0: [sda] tag#4 timing out command, waited 180s
<6>[ 856.740558] sd 0:0:0:0: [sda] tag#4 FAILED Result: hostbyte=DID_RESET driverbyte=DRIVER_OK cmd_age=182s
<6>[ 856.740603] sd 0:0:0:0: [sda] tag#4 CDB: Write(10) 2a 00 00 d3 84 08 00 04 00 00
<3>[ 856.740649] I/O error, dev sda, sector 13861896 op 0x1:(WRITE) flags 0x4800 phys_seg 128 prio class 2
<3>[ 856.740750] sd 0:0:0:0: [sda] tag#5 timing out command, waited 180s
<6>[ 856.740775] sd 0:0:0:0: [sda] tag#5 FAILED Result: hostbyte=DID_RESET driverbyte=DRIVER_OK cmd_age=182s
<6>[ 856.740821] sd 0:0:0:0: [sda] tag#5 CDB: Write(10) 2a 00 00 d3 90 08 00 04 00 00
<3>[ 856.740867] I/O error, dev sda, sector 13864968 op 0x1:(WRITE) flags 0x4800 phys_seg 128 prio class 2
<6>[ 886.862169] sd 0:0:0:0: [sda] tag#4 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD
<6>[ 886.862204] sd 0:0:0:0: [sda] tag#4 CDB: Write(10) 2a 00 00 d3 98 08 00 04 00 00
<6>[ 886.862256] sd 0:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT
<6>[ 886.862303] sd 0:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 00 d3 9c 08 00 04 00 00
<6>[ 886.872436] scsi host0: uas_eh_device_reset_handler start
<6>[ 886.936568] usb 2-1.3: reset SuperSpeed Plus Gen 2x1 USB device number 4 using xhci_hcd
<6>[ 886.954990] scsi host0: uas_eh_device_reset_handler success
<6>[ 917.070222] sd 0:0:0:0: [sda] tag#3 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD IN
<6>[ 917.070318] sd 0:0:0:0: [sda] tag#3 CDB: Read(10) 28 00 00 00 00 00 00 00 20 00
<6>[ 917.079434] scsi host0: uas_eh_device_reset_handler start
<6>[ 917.079994] sd 0:0:0:0: [sda] tag#1 uas_zap_pending 0 uas-tag 1 inflight: CMD
<6>[ 917.080046] sd 0:0:0:0: [sda] tag#1 CDB: Write(10) 2a 00 00 d3 98 08 00 04 00 00
<6>[ 917.080072] sd 0:0:0:0: [sda] tag#2 uas_zap_pending 0 uas-tag 2 inflight: CMD
<6>[ 917.080118] sd 0:0:0:0: [sda] tag#2 CDB: Write(10) 2a 00 00 d3 9c 08 00 04 00 00
<6>[ 917.145714] usb 2-1.3: reset SuperSpeed Plus Gen 2x1 USB device number 4 using xhci_hcd
<6>[ 917.164988] scsi host0: uas_eh_device_reset_handler success
<6>[ 917.165155] sd 0:0:0:0: [sda] tag#3 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=30s
<6>[ 917.165210] sd 0:0:0:0: [sda] tag#3 CDB: Read(10) 28 00 00 00 00 00 00 00 20 00
<3>[ 917.165239] I/O error, dev sda, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 3
<4>[ 934.971114] rq: tag=0 hctx=0 op=WRITE sector=13867016 len=524288 age=78231 ms pid=11900 comm=image_burner state=D
<4>[ 934.971169] rq: tag=1 hctx=0 op=WRITE sector=13868040 len=524288 age=78230 ms pid=11900 comm=image_burner state=D
<4>[ 934.971217] blk: queue stall on sda: 3 inflight, 2 stalled (threshold 60000 ms)
<6>[ 947.276222] sd 0:0:0:0: [sda] tag#3 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD IN
<6>[ 947.276282] sd 0:0:0:0: [sda] tag#3 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
<6>[ 947.280489] scsi host0: uas_eh_device_reset_handler start
<6>[ 947.281255] sd 0:0:0:0: [sda] tag#0 uas_zap_pending 0 uas-tag 1 inflight: CMD
<6>[ 947.281309] sd 0:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 00 d3 98 08 00 04 00 00
<6>[ 947.281391] sd 0:0:0:0: [sda] tag#1 uas_zap_pending 0 uas-tag 2 inflight: CMD
<6>[ 947.281468] sd 0:0:0:0: [sda] tag#1 CDB: Write(10) 2a 00 00 d3 9c 08 00 04 00 00
<6>[ 947.346666] usb 2-1.3: reset SuperSpeed Plus Gen 2x1 USB device number 4 using xhci_hcd
<6>[ 947.365031] scsi host0: uas_eh_device_reset_handler success
<6>[ 977.479406] scsi host0: uas_eh_device_reset_handler start
<6>[ 977.479963] sd 0:0:0:0: [sda] tag#2 uas_zap_pending 0 uas-tag 1 inflight: CMD
<6>[ 977.480015] sd 0:0:0:0: [sda] tag#2 CDB: Write(10) 2a 00 00 d3 98 08 00 04 00 00
<6>[ 977.480042] sd 0:0:0:0: [sda] tag#3 uas_zap_pending 0 uas-tag 2 inflight: CMD
<6>[ 977.480089] sd 0:0:0:0: [sda] tag#3 CDB: Write(10) 2a 00 00 d3 9c 08 00 04 00 00
<6>[ 977.480137] sd 0:0:0:0: [sda] tag#4 uas_zap_pending 0 uas-tag 3 inflight: CMD
<6>[ 977.480166] sd 0:0:0:0: [sda] tag#4 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
<6>[ 977.545653] usb 2-1.3: reset SuperSpeed Plus Gen 2x1 USB device number 4 using xhci_hcd
<6>[ 977.565338] scsi host0: uas_eh_device_reset_handler success
<3>[ 984.123394] INFO: task image_burner:11900 blocked for more than 122 seconds.
<3>[ 984.123449] Tainted: G S U 6.6.135-09364-g548ca84e71c6 #1
<3>[ 984.123501] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
<6>[ 984.123517] task:image_burner state:D stack:0 pid:11900 ppid:11893 flags:0x00004002
<6>[ 984.123577] Call Trace:
<6>[ 984.123603] <TASK>
<6>[ 984.123659] __schedule+0x5e8/0x14c0
<6>[ 984.123688] ? free_unref_page_list+0x25d/0x290
<6>[ 984.123715] ? lru_gen_update_size+0x1e3/0x220
<6>[ 984.123763] schedule+0x5e/0xa0
<6>[ 984.123788] io_schedule+0x47/0x70
<6>[ 984.123814] folio_wait_bit_common+0x18a/0x270
<6>[ 984.123863] ? __pfx_wake_page_function+0x10/0x10
<6>[ 984.123889] folio_wait_writeback+0x35/0x90
<6>[ 984.123937] __filemap_fdatawait_range+0x162/0x190
<6>[ 984.123965] file_write_and_wait_range+0xa3/0x120
<6>[ 984.124013] blkdev_fsync+0x39/0x60
<6>[ 984.124040] __x64_sys_fdatasync+0x4c/0x90
<6>[ 984.124067] do_syscall_64+0x6b/0xa0

Re: [usb-storage] [RFC PATCH] usb: storage: uas: limit consecutive device resets in error handling

[Oliver Neukum]

On 02.07.26 04:25, Sergey Senozhatsky wrote:

> <4>[ 750.651133] rq: tag=0 hctx=0 op=WRITE sector=13860872 len=524288 age=76536 ms pid=11900 comm=image_burner state=D
> <4>[ 750.651205] rq: tag=1 hctx=0 op=WRITE sector=13865992 len=524288 age=76536 ms pid=11900 comm=image_burner state=D
> <4>[ 750.651263] rq: tag=2 hctx=0 op=WRITE sector=13863944 len=524288 age=76536 ms pid=11900 comm=image_burner state=D
> <4>[ 750.651320] rq: tag=3 hctx=0 op=WRITE sector=13862920 len=524288 age=76536 ms pid=11900 comm=image_burner state=D
> <4>[ 750.651379] rq: tag=4 hctx=0 op=WRITE sector=13861896 len=524288 age=76536 ms pid=11900 comm=image_burner state=D
> <4>[ 750.651437] rq: tag=5 hctx=0 op=WRITE sector=13864968 len=524288 age=76536 ms pid=11900 comm=image_burner state=D

[..]
> <4>[ 812.091136] rq: tag=0 hctx=0 op=WRITE sector=13863944 len=524288 age=137976 ms pid=11900 comm=image_burner state=D
> <4>[ 812.091194] rq: tag=1 hctx=0 op=WRITE sector=13862920 len=524288 age=137976 ms pid=11900 comm=image_burner state=D
> <4>[ 812.091242] rq: tag=2 hctx=0 op=WRITE sector=13861896 len=524288 age=137976 ms pid=11900 comm=image_burner state=D
> <4>[ 812.091289] rq: tag=3 hctx=0 op=WRITE sector=13860872 len=524288 age=137976 ms pid=11900 comm=image_burner state=D
> <4>[ 812.091335] rq: tag=4 hctx=0 op=WRITE sector=13865992 len=524288 age=137976 ms pid=11900 comm=image_burner state=D
> <4>[ 812.091381] rq: tag=5 hctx=0 op=WRITE sector=13864968 len=524288 age=137976 ms pid=11900 comm=image_burner state=D

This looks to me like the block layer keeps writing to the same sectors.
In other words the issue I see is with the block layer. Do you know what
triggers the error handler at the very first timeß

	Regards
		Oliver

Re: [usb-storage] [RFC PATCH] usb: storage: uas: limit consecutive device resets in error handling

[Sergey Senozhatsky]

On (26/07/02 10:08), Oliver Neukum wrote:
> On 02.07.26 04:25, Sergey Senozhatsky wrote:
> 
> > <4>[ 750.651133] rq: tag=0 hctx=0 op=WRITE sector=13860872 len=524288 age=76536 ms pid=11900 comm=image_burner state=D
> > <4>[ 750.651205] rq: tag=1 hctx=0 op=WRITE sector=13865992 len=524288 age=76536 ms pid=11900 comm=image_burner state=D
> > <4>[ 750.651263] rq: tag=2 hctx=0 op=WRITE sector=13863944 len=524288 age=76536 ms pid=11900 comm=image_burner state=D
> > <4>[ 750.651320] rq: tag=3 hctx=0 op=WRITE sector=13862920 len=524288 age=76536 ms pid=11900 comm=image_burner state=D
> > <4>[ 750.651379] rq: tag=4 hctx=0 op=WRITE sector=13861896 len=524288 age=76536 ms pid=11900 comm=image_burner state=D
> > <4>[ 750.651437] rq: tag=5 hctx=0 op=WRITE sector=13864968 len=524288 age=76536 ms pid=11900 comm=image_burner state=D
> 
> [..]
> > <4>[ 812.091136] rq: tag=0 hctx=0 op=WRITE sector=13863944 len=524288 age=137976 ms pid=11900 comm=image_burner state=D
> > <4>[ 812.091194] rq: tag=1 hctx=0 op=WRITE sector=13862920 len=524288 age=137976 ms pid=11900 comm=image_burner state=D
> > <4>[ 812.091242] rq: tag=2 hctx=0 op=WRITE sector=13861896 len=524288 age=137976 ms pid=11900 comm=image_burner state=D
> > <4>[ 812.091289] rq: tag=3 hctx=0 op=WRITE sector=13860872 len=524288 age=137976 ms pid=11900 comm=image_burner state=D
> > <4>[ 812.091335] rq: tag=4 hctx=0 op=WRITE sector=13865992 len=524288 age=137976 ms pid=11900 comm=image_burner state=D
> > <4>[ 812.091381] rq: tag=5 hctx=0 op=WRITE sector=13864968 len=524288 age=137976 ms pid=11900 comm=image_burner state=D
> 
> This looks to me like the block layer keeps writing to the same sectors.
> In other words the issue I see is with the block layer.

Oh, this is just our simple blk-mq watchdog.  Those are the same 5
stalled requests (WRITES), it's just they got reported twice - same
tags, same sectors, etc. they just got older (age 78k ms -> 137k ms
since submission).

> Do you know what triggers the error handler at the very first timeß

Unfortunately, no.