[PATCH 0/5] Fix dtbs_check warnings in CSI overlays

[PATCH 0/5] Fix dtbs_check warnings in CSI overlays

[Yemike Abhilash Chandra]

There are a bunch of new warnings generated using CONFIG_OF_ALL_DTBS.
This configuration applies DTB and overlay together to generate test DTBs,
which are then validated using dtbs_check.

This patch series fixes all warnings related to sensor overlays on
jacinto platforms and a few minor warnings on sitara as well.

To fix some of the warnings, missing power regulator nodes are added on
the J721E-SK and the regulator hierarchy on the AM68-SK is corrected.

IMX219 Logs: https://gist.github.com/Yemike-Abhilash-Chandra/b13caae87c0c148b5643df5baba0d90c
OV5640 Logs: https://gist.github.com/Yemike-Abhilash-Chandra/7801f74d28ed5895a15049ce9f0fbe60

Yemike Abhilash Chandra (5):
  arm64: dts: ti: j721e-sk: Add DT nodes for power regulators
  arm64: dts: ti: am68-sk: Fix power regulator hierarchy
  arm64: dts: ti: k3-j721e-sk: Fix dtbs_check warnings in IMX219 overlay
  arm64: dts: ti: k3-am62x: Fix a few minor dtbs_check warnings in
    IMX219 overlay
  arm64: dts: ti: k3-am62x: Rename I2C switch to I2C mux in OV5640
    overlay

 .../boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso  |  3 +-
 .../boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso  |  2 +-
 .../dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso  |  2 +-
 .../boot/dts/ti/k3-am68-sk-base-board.dts     | 13 ++++++-
 .../dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso  | 35 +++++++++++++++++--
 arch/arm64/boot/dts/ti/k3-j721e-sk.dts        | 31 ++++++++++++++++
 6 files changed, 79 insertions(+), 7 deletions(-)

-- 
2.34.1

[PATCH 1/5] arm64: dts: ti: j721e-sk: Add DT nodes for power regulators

[Yemike Abhilash Chandra]

Add device tree nodes for two power regulators on the J721E SK board.
vsys_5v0: A fixed regulator representing the 5V supply output from the
LM61460 and vdd_sd_dv: A GPIO-controlled TLV71033 regulator.

J721E-SK schematics: https://www.ti.com/lit/zip/sprr438
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 31 ++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
index 440ef57be294..4965957e6545 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
@@ -184,6 +184,17 @@ vsys_3v3: fixedregulator-vsys3v3 {
 		regulator-boot-on;
 	};
 
+	vsys_5v0: fixedregulator-vsys5v0 {
+		/* Output of LM61460 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vusb_main>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	vdd_mmc1: fixedregulator-sd {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -211,6 +222,20 @@ vdd_sd_dv_alt: gpio-regulator-tps659411 {
 			 <3300000 0x1>;
 	};
 
+	vdd_sd_dv: gpio-regulator-TLV71033 {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_dv_pins_default>;
+		regulator-name = "tlv71033";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&vsys_5v0>;
+		gpios = <&main_gpio0 118 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+	};
+
 	transceiver1: can-phy1 {
 		compatible = "ti,tcan1042";
 		#phy-cells = <0>;
@@ -613,6 +638,12 @@ J721E_WKUP_IOPAD(0xd4, PIN_OUTPUT, 7) /* (G26) WKUP_GPIO0_9 */
 		>;
 	};
 
+	vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1dc, PIN_INPUT, 7) /* (Y1) SPI1_CLK.GPIO0_118 */
+		>;
+	};
+
 	wkup_uart0_pins_default: wkup-uart0-default-pins {
 		pinctrl-single,pins = <
 			J721E_WKUP_IOPAD(0xa0, PIN_INPUT, 0) /* (J29) WKUP_UART0_RXD */
-- 
2.34.1

Re: [PATCH 1/5] arm64: dts: ti: j721e-sk: Add DT nodes for power regulators

[Nishanth Menon]

On 17:10-20250401, Yemike Abhilash Chandra wrote:
> Add device tree nodes for two power regulators on the J721E SK board.
> vsys_5v0: A fixed regulator representing the 5V supply output from the
> LM61460 and vdd_sd_dv: A GPIO-controlled TLV71033 regulator.
> 
> J721E-SK schematics: https://www.ti.com/lit/zip/sprr438
> Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
> ---
>  arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 31 ++++++++++++++++++++++++++
>  1 file changed, 31 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
> index 440ef57be294..4965957e6545 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
> @@ -184,6 +184,17 @@ vsys_3v3: fixedregulator-vsys3v3 {
>  		regulator-boot-on;
>  	};
>  
> +	vsys_5v0: fixedregulator-vsys5v0 {
> +		/* Output of LM61460 */
> +		compatible = "regulator-fixed";
> +		regulator-name = "vsys_5v0";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		vin-supply = <&vusb_main>;
> +		regulator-always-on;
> +		regulator-boot-on;
> +	};
> +
>  	vdd_mmc1: fixedregulator-sd {
>  		compatible = "regulator-fixed";
>  		pinctrl-names = "default";
> @@ -211,6 +222,20 @@ vdd_sd_dv_alt: gpio-regulator-tps659411 {
>  			 <3300000 0x1>;
>  	};
>  
> +	vdd_sd_dv: gpio-regulator-TLV71033 {

Where is this used?

> +		compatible = "regulator-gpio";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&vdd_sd_dv_pins_default>;
> +		regulator-name = "tlv71033";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-boot-on;
> +		vin-supply = <&vsys_5v0>;
> +		gpios = <&main_gpio0 118 GPIO_ACTIVE_HIGH>;
> +		states = <1800000 0x0>,
> +			 <3300000 0x1>;
> +	};
> +
>  	transceiver1: can-phy1 {
>  		compatible = "ti,tcan1042";
>  		#phy-cells = <0>;
> @@ -613,6 +638,12 @@ J721E_WKUP_IOPAD(0xd4, PIN_OUTPUT, 7) /* (G26) WKUP_GPIO0_9 */
>  		>;
>  	};
>  
> +	vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
> +		pinctrl-single,pins = <
> +			J721E_IOPAD(0x1dc, PIN_INPUT, 7) /* (Y1) SPI1_CLK.GPIO0_118 */
> +		>;
> +	};
> +
>  	wkup_uart0_pins_default: wkup-uart0-default-pins {
>  		pinctrl-single,pins = <
>  			J721E_WKUP_IOPAD(0xa0, PIN_INPUT, 0) /* (J29) WKUP_UART0_RXD */
> -- 
> 2.34.1
> 

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D

Re: [PATCH 1/5] arm64: dts: ti: j721e-sk: Add DT nodes for power regulators

[Yemike Abhilash Chandra]

Hi Nishanth,

On 07/04/25 19:11, Nishanth Menon wrote:
> On 17:10-20250401, Yemike Abhilash Chandra wrote:
>> Add device tree nodes for two power regulators on the J721E SK board.
>> vsys_5v0: A fixed regulator representing the 5V supply output from the
>> LM61460 and vdd_sd_dv: A GPIO-controlled TLV71033 regulator.
>>
>> J721E-SK schematics: https://www.ti.com/lit/zip/sprr438
>> Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
>> ---
>>   arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 31 ++++++++++++++++++++++++++
>>   1 file changed, 31 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
>> index 440ef57be294..4965957e6545 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
>> +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
>> @@ -184,6 +184,17 @@ vsys_3v3: fixedregulator-vsys3v3 {
>>   		regulator-boot-on;
>>   	};
>>   
>> +	vsys_5v0: fixedregulator-vsys5v0 {
>> +		/* Output of LM61460 */
>> +		compatible = "regulator-fixed";
>> +		regulator-name = "vsys_5v0";
>> +		regulator-min-microvolt = <5000000>;
>> +		regulator-max-microvolt = <5000000>;
>> +		vin-supply = <&vusb_main>;
>> +		regulator-always-on;
>> +		regulator-boot-on;
>> +	};
>> +
>>   	vdd_mmc1: fixedregulator-sd {
>>   		compatible = "regulator-fixed";
>>   		pinctrl-names = "default";
>> @@ -211,6 +222,20 @@ vdd_sd_dv_alt: gpio-regulator-tps659411 {
>>   			 <3300000 0x1>;
>>   	};
>>   
>> +	vdd_sd_dv: gpio-regulator-TLV71033 {
> 
> Where is this used?

This node will serve as the vin-supply for other regulator nodes defined 
within
the device tree overlay. It is intended to be utilized when the overlay 
is applied.
The corresponding usage of this node can be found in Patch 3 of this series.

Thanks and Regards
Yemike Abhilash Chandra
> 
>> +		compatible = "regulator-gpio";
>> +		pinctrl-names = "default";
>> +		pinctrl-0 = <&vdd_sd_dv_pins_default>;
>> +		regulator-name = "tlv71033";
>> +		regulator-min-microvolt = <1800000>;
>> +		regulator-max-microvolt = <3300000>;
>> +		regulator-boot-on;
>> +		vin-supply = <&vsys_5v0>;
>> +		gpios = <&main_gpio0 118 GPIO_ACTIVE_HIGH>;
>> +		states = <1800000 0x0>,
>> +			 <3300000 0x1>;
>> +	};
>> +
>>   	transceiver1: can-phy1 {
>>   		compatible = "ti,tcan1042";
>>   		#phy-cells = <0>;
>> @@ -613,6 +638,12 @@ J721E_WKUP_IOPAD(0xd4, PIN_OUTPUT, 7) /* (G26) WKUP_GPIO0_9 */
>>   		>;
>>   	};
>>   
>> +	vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
>> +		pinctrl-single,pins = <
>> +			J721E_IOPAD(0x1dc, PIN_INPUT, 7) /* (Y1) SPI1_CLK.GPIO0_118 */
>> +		>;
>> +	};
>> +
>>   	wkup_uart0_pins_default: wkup-uart0-default-pins {
>>   		pinctrl-single,pins = <
>>   			J721E_WKUP_IOPAD(0xa0, PIN_INPUT, 0) /* (J29) WKUP_UART0_RXD */
>> -- 
>> 2.34.1
>>
> 

[PATCH 2/5] arm64: dts: ti: am68-sk: Fix power regulator hierarchy

[Yemike Abhilash Chandra]

Add a fixed regulator node for the LM61460 5V supply on the AM68 SK and
fix the vin-supply for the TLV71033 regulator on AM68-SK by updating it
from vsys_3v3 to vsys_5v0 to match the schematics.

AM68-SK schematics: https://www.ti.com/lit/zip/sprr463
Fixes: a266c180b398 ("arm64: dts: ti: k3-am68-sk: Add support for AM68 SK base board")
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
index 11522b36e0ce..5fa70a874d7b 100644
--- a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
@@ -44,6 +44,17 @@ vusb_main: regulator-vusb-main5v0 {
 		regulator-boot-on;
 	};
 
+	vsys_5v0: regulator-vsys5v0 {
+		/* Output of LM61460 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vusb_main>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	vsys_3v3: regulator-vsys3v3 {
 		/* Output of LM5141 */
 		compatible = "regulator-fixed";
@@ -76,7 +87,7 @@ vdd_sd_dv: regulator-tlv71033 {
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;
 		regulator-boot-on;
-		vin-supply = <&vsys_3v3>;
+		vin-supply = <&vsys_5v0>;
 		gpios = <&main_gpio0 49 GPIO_ACTIVE_HIGH>;
 		states = <1800000 0x0>,
 			 <3300000 0x1>;
-- 
2.34.1

[PATCH 3/5] arm64: dts: ti: k3-j721e-sk: Fix dtbs_check warnings in IMX219 overlay

[Yemike Abhilash Chandra]

The device tree bindings mandate three regulator nodes for the IMX219
sensor: VANA (analog), VDIG (digital core), and VDDL (digital I/O). Add the
necessary regulator nodes in the device tree overlay and also the device
tree bindings do not include a clock-names property. Remove the incorrectly
added clock-names entry to avoid dtbs_check warnings.

Fixes: f767eb918096 ("arm64: dts: ti: k3-j721e-sk: Add overlay for IMX219")
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
---
 .../dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso  | 35 +++++++++++++++++--
 1 file changed, 33 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso b/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso
index 47bb5480b5b0..4eb3cffab032 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso
@@ -19,6 +19,33 @@ clk_imx219_fixed: imx219-xclk {
 		#clock-cells = <0>;
 		clock-frequency = <24000000>;
 	};
+
+	reg_2p8v: regulator-2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vdd_sd_dv>;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vdd_sd_dv>;
+		regulator-always-on;
+	};
+
+	reg_1p2v: regulator-1p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P2V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vdd_sd_dv>;
+		regulator-always-on;
+	};
 };
 
 &csi_mux {
@@ -34,7 +61,9 @@ imx219_0: imx219-0@10 {
 		reg = <0x10>;
 
 		clocks = <&clk_imx219_fixed>;
-		clock-names = "xclk";
+		VANA-supply = <&reg_2p8v>;
+		VDIG-supply = <&reg_1p8v>;
+		VDDL-supply = <&reg_1p2v>;
 
 		port {
 			csi2_cam0: endpoint {
@@ -56,7 +85,9 @@ imx219_1: imx219-1@10 {
 		reg = <0x10>;
 
 		clocks = <&clk_imx219_fixed>;
-		clock-names = "xclk";
+		VANA-supply = <&reg_2p8v>;
+		VDIG-supply = <&reg_1p8v>;
+		VDDL-supply = <&reg_1p2v>;
 
 		port {
 			csi2_cam1: endpoint {
-- 
2.34.1

Re: [PATCH 3/5] arm64: dts: ti: k3-j721e-sk: Fix dtbs_check warnings in IMX219 overlay

[Nishanth Menon]

$subject - the patch adds description for the supplies for the sensor.
Please fix the description.

On 17:10-20250401, Yemike Abhilash Chandra wrote:
> The device tree bindings mandate three regulator nodes for the IMX219
> sensor: VANA (analog), VDIG (digital core), and VDDL (digital I/O). Add the
> necessary regulator nodes in the device tree overlay and also the device
> tree bindings do not include a clock-names property. Remove the incorrectly
> added clock-names entry to avoid dtbs_check warnings.
> 
> Fixes: f767eb918096 ("arm64: dts: ti: k3-j721e-sk: Add overlay for IMX219")
> Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
> ---
>  .../dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso  | 35 +++++++++++++++++--
>  1 file changed, 33 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso b/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso
> index 47bb5480b5b0..4eb3cffab032 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso
> +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso
> @@ -19,6 +19,33 @@ clk_imx219_fixed: imx219-xclk {
>  		#clock-cells = <0>;
>  		clock-frequency = <24000000>;
>  	};
> +
> +	reg_2p8v: regulator-2p8v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "2P8V";
> +		regulator-min-microvolt = <2800000>;
> +		regulator-max-microvolt = <2800000>;
> +		vin-supply = <&vdd_sd_dv>;
> +		regulator-always-on;
> +	};
> +
> +	reg_1p8v: regulator-1p8v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "1P8V";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +		vin-supply = <&vdd_sd_dv>;
> +		regulator-always-on;
> +	};
> +
> +	reg_1p2v: regulator-1p2v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "1P2V";
> +		regulator-min-microvolt = <1200000>;
> +		regulator-max-microvolt = <1200000>;
> +		vin-supply = <&vdd_sd_dv>;
> +		regulator-always-on;
> +	};
>  };
>  
>  &csi_mux {
> @@ -34,7 +61,9 @@ imx219_0: imx219-0@10 {
>  		reg = <0x10>;
>  
>  		clocks = <&clk_imx219_fixed>;
> -		clock-names = "xclk";
> +		VANA-supply = <&reg_2p8v>;
> +		VDIG-supply = <&reg_1p8v>;
> +		VDDL-supply = <&reg_1p2v>;
>  
>  		port {
>  			csi2_cam0: endpoint {
> @@ -56,7 +85,9 @@ imx219_1: imx219-1@10 {
>  		reg = <0x10>;
>  
>  		clocks = <&clk_imx219_fixed>;
> -		clock-names = "xclk";
> +		VANA-supply = <&reg_2p8v>;
> +		VDIG-supply = <&reg_1p8v>;
> +		VDDL-supply = <&reg_1p2v>;
>  
>  		port {
>  			csi2_cam1: endpoint {
> -- 
> 2.34.1
> 

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D

Re: [PATCH 3/5] arm64: dts: ti: k3-j721e-sk: Fix dtbs_check warnings in IMX219 overlay

[Yemike Abhilash Chandra]

Hi Nishanth,

On 07/04/25 19:15, Nishanth Menon wrote:
> $subject - the patch adds description for the supplies for the sensor.
> Please fix the description.
> 

In this patch, I am addressing all dtbs_check warnings generated from 
this overlay:

1. Adding the missing regulator node
2. Removing the incorrectly added clock-names property

Due to the inclusion of both changes, I opted for a more generic commit 
title.
Please let me know if you want me to split this patch into two separate 
patches
with specific commit titles and commit messages.

Thanks and Regards
Yemike Abhilash Chandra

> On 17:10-20250401, Yemike Abhilash Chandra wrote:
>> The device tree bindings mandate three regulator nodes for the IMX219
>> sensor: VANA (analog), VDIG (digital core), and VDDL (digital I/O). Add the
>> necessary regulator nodes in the device tree overlay and also the device
>> tree bindings do not include a clock-names property. Remove the incorrectly
>> added clock-names entry to avoid dtbs_check warnings.
>>
>> Fixes: f767eb918096 ("arm64: dts: ti: k3-j721e-sk: Add overlay for IMX219")
>> Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
>> ---
>>   .../dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso  | 35 +++++++++++++++++--
>>   1 file changed, 33 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso b/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso
>> index 47bb5480b5b0..4eb3cffab032 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso
>> +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso
>> @@ -19,6 +19,33 @@ clk_imx219_fixed: imx219-xclk {
>>   		#clock-cells = <0>;
>>   		clock-frequency = <24000000>;
>>   	};
>> +
>> +	reg_2p8v: regulator-2p8v {
>> +		compatible = "regulator-fixed";
>> +		regulator-name = "2P8V";
>> +		regulator-min-microvolt = <2800000>;
>> +		regulator-max-microvolt = <2800000>;
>> +		vin-supply = <&vdd_sd_dv>;
>> +		regulator-always-on;
>> +	};
>> +
>> +	reg_1p8v: regulator-1p8v {
>> +		compatible = "regulator-fixed";
>> +		regulator-name = "1P8V";
>> +		regulator-min-microvolt = <1800000>;
>> +		regulator-max-microvolt = <1800000>;
>> +		vin-supply = <&vdd_sd_dv>;
>> +		regulator-always-on;
>> +	};
>> +
>> +	reg_1p2v: regulator-1p2v {
>> +		compatible = "regulator-fixed";
>> +		regulator-name = "1P2V";
>> +		regulator-min-microvolt = <1200000>;
>> +		regulator-max-microvolt = <1200000>;
>> +		vin-supply = <&vdd_sd_dv>;
>> +		regulator-always-on;
>> +	};
>>   };
>>   
>>   &csi_mux {
>> @@ -34,7 +61,9 @@ imx219_0: imx219-0@10 {
>>   		reg = <0x10>;
>>   
>>   		clocks = <&clk_imx219_fixed>;
>> -		clock-names = "xclk";
>> +		VANA-supply = <&reg_2p8v>;
>> +		VDIG-supply = <&reg_1p8v>;
>> +		VDDL-supply = <&reg_1p2v>;
>>   
>>   		port {
>>   			csi2_cam0: endpoint {
>> @@ -56,7 +85,9 @@ imx219_1: imx219-1@10 {
>>   		reg = <0x10>;
>>   
>>   		clocks = <&clk_imx219_fixed>;
>> -		clock-names = "xclk";
>> +		VANA-supply = <&reg_2p8v>;
>> +		VDIG-supply = <&reg_1p8v>;
>> +		VDDL-supply = <&reg_1p2v>;
>>   
>>   		port {
>>   			csi2_cam1: endpoint {
>> -- 
>> 2.34.1
>>
> 

Re: [PATCH 3/5] arm64: dts: ti: k3-j721e-sk: Fix dtbs_check warnings in IMX219 overlay

[Nishanth Menon]

On 14:31-20250408, Yemike Abhilash Chandra wrote:
> Hi Nishanth,
> 
> On 07/04/25 19:15, Nishanth Menon wrote:
> > $subject - the patch adds description for the supplies for the sensor.
> > Please fix the description.
> > 
> 
> In this patch, I am addressing all dtbs_check warnings generated from this
> overlay:
> 
> 1. Adding the missing regulator node
> 2. Removing the incorrectly added clock-names property
> 
> Due to the inclusion of both changes, I opted for a more generic commit
> title.
> Please let me know if you want me to split this patch into two separate
> patches
> with specific commit titles and commit messages.

subject line should indicate what we are fixing here. If the commit
message indicates two different problems that were to be fixed, it is
better to do that in two different commits. Generic subject line is hard
to gork to understand if it is critical or not.

Do not forget ./Documentation/process/stable-kernel-rules.rst and use
fixes: tag as appropriate to indicate the original problem patch
which is being fixed.


[...]

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D

[PATCH 4/5] arm64: dts: ti: k3-am62x: Fix a few minor dtbs_check warnings in IMX219 overlay

[Yemike Abhilash Chandra]

The IMX219 sensor device tree bindings do not include a clock-names
property. Remove the incorrectly added clock-names entry and also the
device tree incorrectly defined an I2C switch instead of an I2C mux.
According to the DT bindings, the correct terminology and node definition
should use "i2c-mux" instead of "i2c-switch". Hence, update the same to
avoid dtbs_check warnings.

Fixes: 4111db03dc05 ("arm64: dts: ti: k3-am62x: Add overlay for IMX219")
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso
index 76ca02127f95..dd090813a32d 100644
--- a/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso
@@ -22,7 +22,7 @@ &main_i2c2 {
 	#size-cells = <0>;
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9543";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -39,7 +39,6 @@ ov5640: camera@10 {
 				reg = <0x10>;
 
 				clocks = <&clk_imx219_fixed>;
-				clock-names = "xclk";
 
 				reset-gpios = <&exp1 13 GPIO_ACTIVE_HIGH>;
 
-- 
2.34.1

[PATCH 5/5] arm64: dts: ti: k3-am62x: Rename I2C switch to I2C mux in OV5640 overlay

[Yemike Abhilash Chandra]

The OV5640 device tree overlay incorrectly defined an I2C switch instead
of an I2C mux. According to the DT bindings, the correct terminology and
node definition should use "i2c-mux" instead of "i2c-switch". Hence,
update the same to avoid dtbs_check warnings.

Fixes: 635ed9715194 ("arm64: dts: ti: k3-am62x: Add overlays for OV5640")
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso      | 2 +-
 arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso
index ccc7f5e43184..7fc7c95f5cd5 100644
--- a/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso
@@ -22,7 +22,7 @@ &main_i2c2 {
 	#size-cells = <0>;
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9543";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso
index 4eaf9d757dd0..b6bfdfbbdd98 100644
--- a/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso
@@ -22,7 +22,7 @@ &main_i2c2 {
 	#size-cells = <0>;
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9543";
 		#address-cells = <1>;
 		#size-cells = <0>;
-- 
2.34.1