public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
* [PATCH] thermal/drivers/mediatek/lvts_thermal: Remove filtered mode for mt8188
@ 2024-05-15 15:03 Julien Panis
  2024-05-15 15:22 ` Nicolas Pitre
  2024-05-16  9:08 ` AngeloGioacchino Del Regno
  0 siblings, 2 replies; 3+ messages in thread
From: Julien Panis @ 2024-05-15 15:03 UTC (permalink / raw)
  To: Rafael J. Wysocki, Daniel Lezcano, Zhang Rui, Lukasz Luba,
	Matthias Brugger, AngeloGioacchino Del Regno, Nicolas Pitre
  Cc: linux-pm, linux-kernel, linux-arm-kernel, linux-mediatek,
	Julien Panis

Filtered mode is not supported on mt8188 SoC and is the source of bad
results. Move to immediate mode which provides good temperatures.

Signed-off-by: Julien Panis <jpanis@baylibre.com>
---
Filtered mode was set by mistake and difficulties with the test setup
prevented from catching this earlier. Use default mode (immediate mode)
instead.
---
 drivers/thermal/mediatek/lvts_thermal.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
index 0bb3a495b56e..82c355c466cf 100644
--- a/drivers/thermal/mediatek/lvts_thermal.c
+++ b/drivers/thermal/mediatek/lvts_thermal.c
@@ -1458,7 +1458,6 @@ static const struct lvts_ctrl_data mt8188_lvts_mcu_data_ctrl[] = {
 		},
 		VALID_SENSOR_MAP(1, 1, 1, 1),
 		.offset = 0x0,
-		.mode = LVTS_MSR_FILTERED_MODE,
 	},
 	{
 		.lvts_sensor = {
@@ -1469,7 +1468,6 @@ static const struct lvts_ctrl_data mt8188_lvts_mcu_data_ctrl[] = {
 		},
 		VALID_SENSOR_MAP(1, 1, 0, 0),
 		.offset = 0x100,
-		.mode = LVTS_MSR_FILTERED_MODE,
 	}
 };
 
@@ -1483,7 +1481,6 @@ static const struct lvts_ctrl_data mt8188_lvts_ap_data_ctrl[] = {
 		},
 		VALID_SENSOR_MAP(0, 1, 0, 0),
 		.offset = 0x0,
-		.mode = LVTS_MSR_FILTERED_MODE,
 	},
 	{
 		.lvts_sensor = {
@@ -1496,7 +1493,6 @@ static const struct lvts_ctrl_data mt8188_lvts_ap_data_ctrl[] = {
 		},
 		VALID_SENSOR_MAP(1, 1, 1, 0),
 		.offset = 0x100,
-		.mode = LVTS_MSR_FILTERED_MODE,
 	},
 	{
 		.lvts_sensor = {
@@ -1507,7 +1503,6 @@ static const struct lvts_ctrl_data mt8188_lvts_ap_data_ctrl[] = {
 		},
 		VALID_SENSOR_MAP(1, 1, 0, 0),
 		.offset = 0x200,
-		.mode = LVTS_MSR_FILTERED_MODE,
 	},
 	{
 		.lvts_sensor = {
@@ -1518,7 +1513,6 @@ static const struct lvts_ctrl_data mt8188_lvts_ap_data_ctrl[] = {
 		},
 		VALID_SENSOR_MAP(1, 1, 0, 0),
 		.offset = 0x300,
-		.mode = LVTS_MSR_FILTERED_MODE,
 	}
 };
 

---
base-commit: 82d92a9a1b9ea0ea52aff27cddd05009b4edad49
change-id: 20240515-mtk-thermal-mt8188-mode-fix-e583d9a31da1

Best regards,
-- 
Julien Panis <jpanis@baylibre.com>


^ permalink raw reply related	[flat|nested] 3+ messages in thread

* Re: [PATCH] thermal/drivers/mediatek/lvts_thermal: Remove filtered mode for mt8188
  2024-05-15 15:03 [PATCH] thermal/drivers/mediatek/lvts_thermal: Remove filtered mode for mt8188 Julien Panis
@ 2024-05-15 15:22 ` Nicolas Pitre
  2024-05-16  9:08 ` AngeloGioacchino Del Regno
  1 sibling, 0 replies; 3+ messages in thread
From: Nicolas Pitre @ 2024-05-15 15:22 UTC (permalink / raw)
  To: Julien Panis
  Cc: Rafael J. Wysocki, Daniel Lezcano, Zhang Rui, Lukasz Luba,
	Matthias Brugger, AngeloGioacchino Del Regno, linux-pm,
	linux-kernel, linux-arm-kernel, linux-mediatek

On Wed, 15 May 2024, Julien Panis wrote:

> Filtered mode is not supported on mt8188 SoC and is the source of bad
> results. Move to immediate mode which provides good temperatures.
> 
> Signed-off-by: Julien Panis <jpanis@baylibre.com>

Reviewed-by: Nicolas Pitre <npitre@baylibre.com>


> ---
> Filtered mode was set by mistake and difficulties with the test setup
> prevented from catching this earlier. Use default mode (immediate mode)
> instead.
> ---
>  drivers/thermal/mediatek/lvts_thermal.c | 6 ------
>  1 file changed, 6 deletions(-)
> 
> diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
> index 0bb3a495b56e..82c355c466cf 100644
> --- a/drivers/thermal/mediatek/lvts_thermal.c
> +++ b/drivers/thermal/mediatek/lvts_thermal.c
> @@ -1458,7 +1458,6 @@ static const struct lvts_ctrl_data mt8188_lvts_mcu_data_ctrl[] = {
>  		},
>  		VALID_SENSOR_MAP(1, 1, 1, 1),
>  		.offset = 0x0,
> -		.mode = LVTS_MSR_FILTERED_MODE,
>  	},
>  	{
>  		.lvts_sensor = {
> @@ -1469,7 +1468,6 @@ static const struct lvts_ctrl_data mt8188_lvts_mcu_data_ctrl[] = {
>  		},
>  		VALID_SENSOR_MAP(1, 1, 0, 0),
>  		.offset = 0x100,
> -		.mode = LVTS_MSR_FILTERED_MODE,
>  	}
>  };
>  
> @@ -1483,7 +1481,6 @@ static const struct lvts_ctrl_data mt8188_lvts_ap_data_ctrl[] = {
>  		},
>  		VALID_SENSOR_MAP(0, 1, 0, 0),
>  		.offset = 0x0,
> -		.mode = LVTS_MSR_FILTERED_MODE,
>  	},
>  	{
>  		.lvts_sensor = {
> @@ -1496,7 +1493,6 @@ static const struct lvts_ctrl_data mt8188_lvts_ap_data_ctrl[] = {
>  		},
>  		VALID_SENSOR_MAP(1, 1, 1, 0),
>  		.offset = 0x100,
> -		.mode = LVTS_MSR_FILTERED_MODE,
>  	},
>  	{
>  		.lvts_sensor = {
> @@ -1507,7 +1503,6 @@ static const struct lvts_ctrl_data mt8188_lvts_ap_data_ctrl[] = {
>  		},
>  		VALID_SENSOR_MAP(1, 1, 0, 0),
>  		.offset = 0x200,
> -		.mode = LVTS_MSR_FILTERED_MODE,
>  	},
>  	{
>  		.lvts_sensor = {
> @@ -1518,7 +1513,6 @@ static const struct lvts_ctrl_data mt8188_lvts_ap_data_ctrl[] = {
>  		},
>  		VALID_SENSOR_MAP(1, 1, 0, 0),
>  		.offset = 0x300,
> -		.mode = LVTS_MSR_FILTERED_MODE,
>  	}
>  };
>  
> 
> ---
> base-commit: 82d92a9a1b9ea0ea52aff27cddd05009b4edad49
> change-id: 20240515-mtk-thermal-mt8188-mode-fix-e583d9a31da1
> 
> Best regards,
> -- 
> Julien Panis <jpanis@baylibre.com>
> 
> 

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH] thermal/drivers/mediatek/lvts_thermal: Remove filtered mode for mt8188
  2024-05-15 15:03 [PATCH] thermal/drivers/mediatek/lvts_thermal: Remove filtered mode for mt8188 Julien Panis
  2024-05-15 15:22 ` Nicolas Pitre
@ 2024-05-16  9:08 ` AngeloGioacchino Del Regno
  1 sibling, 0 replies; 3+ messages in thread
From: AngeloGioacchino Del Regno @ 2024-05-16  9:08 UTC (permalink / raw)
  To: Julien Panis, Rafael J. Wysocki, Daniel Lezcano, Zhang Rui,
	Lukasz Luba, Matthias Brugger, Nicolas Pitre
  Cc: linux-pm, linux-kernel, linux-arm-kernel, linux-mediatek

Il 15/05/24 17:03, Julien Panis ha scritto:
> Filtered mode is not supported on mt8188 SoC and is the source of bad
> results. Move to immediate mode which provides good temperatures.
> 
> Signed-off-by: Julien Panis <jpanis@baylibre.com>

Please add the relevant Fixes tag, after which:

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

> ---
> Filtered mode was set by mistake and difficulties with the test setup
> prevented from catching this earlier. Use default mode (immediate mode)
> instead.
> ---
>   drivers/thermal/mediatek/lvts_thermal.c | 6 ------
>   1 file changed, 6 deletions(-)
> 
> diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
> index 0bb3a495b56e..82c355c466cf 100644
> --- a/drivers/thermal/mediatek/lvts_thermal.c
> +++ b/drivers/thermal/mediatek/lvts_thermal.c
> @@ -1458,7 +1458,6 @@ static const struct lvts_ctrl_data mt8188_lvts_mcu_data_ctrl[] = {
>   		},
>   		VALID_SENSOR_MAP(1, 1, 1, 1),
>   		.offset = 0x0,
> -		.mode = LVTS_MSR_FILTERED_MODE,
>   	},
>   	{
>   		.lvts_sensor = {
> @@ -1469,7 +1468,6 @@ static const struct lvts_ctrl_data mt8188_lvts_mcu_data_ctrl[] = {
>   		},
>   		VALID_SENSOR_MAP(1, 1, 0, 0),
>   		.offset = 0x100,
> -		.mode = LVTS_MSR_FILTERED_MODE,
>   	}
>   };
>   
> @@ -1483,7 +1481,6 @@ static const struct lvts_ctrl_data mt8188_lvts_ap_data_ctrl[] = {
>   		},
>   		VALID_SENSOR_MAP(0, 1, 0, 0),
>   		.offset = 0x0,
> -		.mode = LVTS_MSR_FILTERED_MODE,
>   	},
>   	{
>   		.lvts_sensor = {
> @@ -1496,7 +1493,6 @@ static const struct lvts_ctrl_data mt8188_lvts_ap_data_ctrl[] = {
>   		},
>   		VALID_SENSOR_MAP(1, 1, 1, 0),
>   		.offset = 0x100,
> -		.mode = LVTS_MSR_FILTERED_MODE,
>   	},
>   	{
>   		.lvts_sensor = {
> @@ -1507,7 +1503,6 @@ static const struct lvts_ctrl_data mt8188_lvts_ap_data_ctrl[] = {
>   		},
>   		VALID_SENSOR_MAP(1, 1, 0, 0),
>   		.offset = 0x200,
> -		.mode = LVTS_MSR_FILTERED_MODE,
>   	},
>   	{
>   		.lvts_sensor = {
> @@ -1518,7 +1513,6 @@ static const struct lvts_ctrl_data mt8188_lvts_ap_data_ctrl[] = {
>   		},
>   		VALID_SENSOR_MAP(1, 1, 0, 0),
>   		.offset = 0x300,
> -		.mode = LVTS_MSR_FILTERED_MODE,
>   	}
>   };
>   
> 
> ---
> base-commit: 82d92a9a1b9ea0ea52aff27cddd05009b4edad49
> change-id: 20240515-mtk-thermal-mt8188-mode-fix-e583d9a31da1
> 
> Best regards,


^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2024-05-16  9:08 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-05-15 15:03 [PATCH] thermal/drivers/mediatek/lvts_thermal: Remove filtered mode for mt8188 Julien Panis
2024-05-15 15:22 ` Nicolas Pitre
2024-05-16  9:08 ` AngeloGioacchino Del Regno

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox