From: xiong <xiong@qca.qualcomm.com>
To: <davem@davemloft.net>, <netdev@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Cc: <qca-linux-team@qualcomm.com>, <nic-devel@qualcomm.com>,
xiong <xiong@qca.qualcomm.com>
Subject: [PATCH 02/10] atl1c: add PHY link event(up/down) patch
Date: Tue, 1 May 2012 09:38:50 +0800 [thread overview]
Message-ID: <1335836338-9425-3-git-send-email-xiong@qca.qualcomm.com> (raw)
In-Reply-To: <1335836338-9425-1-git-send-email-xiong@qca.qualcomm.com>
On some platforms the PHY settings need to change depending on the
cable link status to get better stability.
Signed-off-by: xiong <xiong@qca.qualcomm.com>
Tested-by: Liu David <dwliu@qca.qualcomm.com>
---
drivers/net/ethernet/atheros/atl1c/atl1c.h | 1 +
drivers/net/ethernet/atheros/atl1c/atl1c_hw.c | 37 ++++++++++++++++
drivers/net/ethernet/atheros/atl1c/atl1c_hw.h | 1 +
drivers/net/ethernet/atheros/atl1c/atl1c_main.c | 53 +++++++++++++++++++++++
4 files changed, 92 insertions(+), 0 deletions(-)
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c.h b/drivers/net/ethernet/atheros/atl1c/atl1c.h
index acc2956..b2bf324 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c.h
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c.h
@@ -436,6 +436,7 @@ struct atl1c_hw {
bool phy_configured;
bool re_autoneg;
bool emi_ca;
+ bool msi_lnkpatch; /* link patch for specific platforms */
};
/*
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c
index 07f017f..209c179 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c
@@ -848,3 +848,40 @@ int atl1c_power_saving(struct atl1c_hw *hw, u32 wufc)
return 0;
}
+
+
+/* configure phy after Link change Event */
+void atl1c_post_phy_linkchg(struct atl1c_hw *hw, u16 link_speed)
+{
+ u16 phy_val;
+ bool adj_thresh = false;
+
+ if (hw->nic_type == athr_l2c_b || hw->nic_type == athr_l2c_b2 ||
+ hw->nic_type == athr_l1d || hw->nic_type == athr_l1d_2)
+ adj_thresh = true;
+
+ if (link_speed != SPEED_0) { /* link up */
+ /* az with brcm, half-amp */
+ if (hw->nic_type == athr_l1d_2) {
+ atl1c_read_phy_ext(hw, MIIEXT_PCS, MIIEXT_CLDCTRL6,
+ &phy_val);
+ phy_val = FIELD_GETX(phy_val, CLDCTRL6_CAB_LEN);
+ phy_val = phy_val > CLDCTRL6_CAB_LEN_SHORT ?
+ AZ_ANADECT_LONG : AZ_ANADECT_DEF;
+ atl1c_write_phy_dbg(hw, MIIDBG_AZ_ANADECT, phy_val);
+ }
+ /* threshold adjust */
+ if (adj_thresh && link_speed == SPEED_100 && hw->msi_lnkpatch) {
+ atl1c_write_phy_dbg(hw, MIIDBG_MSE16DB, L1D_MSE16DB_UP);
+ atl1c_write_phy_dbg(hw, MIIDBG_SYSMODCTRL,
+ L1D_SYSMODCTRL_IECHOADJ_DEF);
+ }
+ } else { /* link down */
+ if (adj_thresh && hw->msi_lnkpatch) {
+ atl1c_write_phy_dbg(hw, MIIDBG_SYSMODCTRL,
+ SYSMODCTRL_IECHOADJ_DEF);
+ atl1c_write_phy_dbg(hw, MIIDBG_MSE16DB,
+ L1D_MSE16DB_DOWN);
+ }
+ }
+}
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h
index 0adb341..ea3f520 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h
@@ -63,6 +63,7 @@ int atl1c_write_phy_ext(struct atl1c_hw *hw, u8 dev_addr,
u16 reg_addr, u16 phy_data);
int atl1c_read_phy_dbg(struct atl1c_hw *hw, u16 reg_addr, u16 *phy_data);
int atl1c_write_phy_dbg(struct atl1c_hw *hw, u16 reg_addr, u16 phy_data);
+void atl1c_post_phy_linkchg(struct atl1c_hw *hw, u16 link_speed);
/* hw-ids */
#define PCI_DEVICE_ID_ATTANSIC_L2C 0x1062
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
index 25b7b00..6d5b374 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
@@ -258,6 +258,7 @@ static void atl1c_check_link_status(struct atl1c_adapter *adapter)
if (netif_msg_hw(adapter))
dev_warn(&pdev->dev, "stop mac failed\n");
atl1c_set_aspm(hw, SPEED_0);
+ atl1c_post_phy_linkchg(hw, SPEED_0);
netif_carrier_off(netdev);
netif_stop_queue(netdev);
} else {
@@ -274,6 +275,7 @@ static void atl1c_check_link_status(struct atl1c_adapter *adapter)
adapter->link_speed = speed;
adapter->link_duplex = duplex;
atl1c_set_aspm(hw, speed);
+ atl1c_post_phy_linkchg(hw, speed);
atl1c_start_mac(adapter);
if (netif_msg_link(adapter))
dev_info(&pdev->dev,
@@ -697,6 +699,55 @@ static int atl1c_setup_mac_funcs(struct atl1c_hw *hw)
hw->link_cap_flags |= ATL1C_LINK_CAP_1000M;
return 0;
}
+
+struct atl1c_platform_patch {
+ u16 pci_did;
+ u8 pci_revid;
+ u16 subsystem_vid;
+ u16 subsystem_did;
+ u32 patch_flag;
+#define ATL1C_LINK_PATCH 0x1
+};
+static const struct atl1c_platform_patch plats[] __devinitdata = {
+{0x2060, 0xC1, 0x1019, 0x8152, 0x1},
+{0x2060, 0xC1, 0x1019, 0x2060, 0x1},
+{0x2060, 0xC1, 0x1019, 0xE000, 0x1},
+{0x2062, 0xC0, 0x1019, 0x8152, 0x1},
+{0x2062, 0xC0, 0x1019, 0x2062, 0x1},
+{0x2062, 0xC0, 0x1458, 0xE000, 0x1},
+{0x2062, 0xC1, 0x1019, 0x8152, 0x1},
+{0x2062, 0xC1, 0x1019, 0x2062, 0x1},
+{0x2062, 0xC1, 0x1458, 0xE000, 0x1},
+{0x2062, 0xC1, 0x1565, 0x2802, 0x1},
+{0x2062, 0xC1, 0x1565, 0x2801, 0x1},
+{0x1073, 0xC0, 0x1019, 0x8151, 0x1},
+{0x1073, 0xC0, 0x1019, 0x1073, 0x1},
+{0x1073, 0xC0, 0x1458, 0xE000, 0x1},
+{0x1083, 0xC0, 0x1458, 0xE000, 0x1},
+{0x1083, 0xC0, 0x1019, 0x8151, 0x1},
+{0x1083, 0xC0, 0x1019, 0x1083, 0x1},
+{0x1083, 0xC0, 0x1462, 0x7680, 0x1},
+{0x1083, 0xC0, 0x1565, 0x2803, 0x1},
+{0},
+};
+
+static void __devinit atl1c_patch_assign(struct atl1c_hw *hw)
+{
+ int i = 0;
+
+ hw->msi_lnkpatch = false;
+
+ while (plats[i].pci_did != 0) {
+ if (plats[i].pci_did == hw->device_id &&
+ plats[i].pci_revid == hw->revision_id &&
+ plats[i].subsystem_vid == hw->subsystem_vendor_id &&
+ plats[i].subsystem_did == hw->subsystem_id) {
+ if (plats[i].patch_flag & ATL1C_LINK_PATCH)
+ hw->msi_lnkpatch = true;
+ }
+ i++;
+ }
+}
/*
* atl1c_sw_init - Initialize general software structures (struct atl1c_adapter)
* @adapter: board private structure to initialize
@@ -732,6 +783,8 @@ static int __devinit atl1c_sw_init(struct atl1c_adapter *adapter)
dev_err(&pdev->dev, "set mac function pointers failed\n");
return -1;
}
+ atl1c_patch_assign(hw);
+
hw->intr_mask = IMR_NORMAL_MASK;
hw->phy_configured = false;
hw->preamble_len = 7;
--
1.7.7
next prev parent reply other threads:[~2012-05-01 1:38 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-01 1:38 [PATCH 00/10] atl1c: update hardware settings - v4 xiong
2012-05-01 1:38 ` [PATCH 01/10] atl1c: add workaround for issue of bit INTX-disable for MSI interrupt xiong
2012-05-01 1:38 ` xiong [this message]
2012-05-01 1:38 ` [PATCH 03/10] atl1c: clear WoL status when reset pcie xiong
2012-05-01 1:38 ` [PATCH 04/10] atl1c: remove code of closing register writable attribution xiong
2012-05-01 1:38 ` [PATCH 05/10] atl1c: refine mac address related code xiong
2012-05-01 1:38 ` [PATCH 06/10] atl1c: enlarge L1 response waiting timer xiong
2012-05-01 1:38 ` [PATCH 07/10] atl1c: cancel task when interface closed xiong
2012-05-01 1:38 ` [PATCH 08/10] atl1c: do MAC-reset when PHY link down xiong
2012-05-01 1:38 ` [PATCH 09/10] atl1c: Disable L0S when no cable link xiong
2012-05-01 1:38 ` [PATCH 10/10] atl1c: remove PHY polling from atl1c_change_mtu xiong
2012-05-01 1:45 ` [PATCH 00/10] atl1c: update hardware settings - v4 David Miller
-- strict thread matches above, loose matches on Subject: below --
2012-04-28 1:58 xiong
2012-04-28 1:58 ` [PATCH 02/10] atl1c: add PHY link event(up/down) patch xiong
2012-04-28 17:24 ` Florian Fainelli
2012-04-29 10:07 ` Huang, Xiong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1335836338-9425-3-git-send-email-xiong@qca.qualcomm.com \
--to=xiong@qca.qualcomm.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nic-devel@qualcomm.com \
--cc=qca-linux-team@qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox