* Re: Porting problem: ndo_set_multicast_list removed
[not found] <20121224163005.GA3970@zuhnb712>
@ 2012-12-24 19:16 ` Eric Dumazet
2012-12-24 23:47 ` Woody Wu
0 siblings, 1 reply; 2+ messages in thread
From: Eric Dumazet @ 2012-12-24 19:16 UTC (permalink / raw)
To: Woody Wu; +Cc: kernelnewbies, linux-kernel, netdev
On Tue, 2012-12-25 at 00:30 +0800, Woody Wu wrote:
> Hi, list
>
> I am porting an ethernet driver from 2.6.x to 3.7.1. I found in the new
> kernel, the ndo_set_multicast_list method in the net_device_ops had been
> removed. What's the story behind? Can I simply ignore this method
> defined in an old driver?
>
> Please also help to check the below code, is the list of the operations
> defined for my driver enough or not?
>
> const struct net_device_ops ax_netdev_ops = {
> .ndo_open = mydriver_open,
> .ndo_stop = mydriver_close,
> .ndo_start_xmit = mydriver_start_xmit,
> .ndo_get_stats = mydriver_get_stats,
> /*.ndo_set_multicast_list = mydriver_set_multicast_list,*/
> .ndo_set_mac_address = mydriver_set_mac_address,
> };
>
> Thanks in advance.
>
Take a look at :
commit afc4b13df143122f99a0eb10bfefb216c2806de0
Author: Jiri Pirko <jpirko@redhat.com>
Date: Tue Aug 16 06:29:01 2011 +0000
net: remove use of ndo_set_multicast_list in drivers
replace it by ndo_set_rx_mode
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Porting problem: ndo_set_multicast_list removed
2012-12-24 19:16 ` Porting problem: ndo_set_multicast_list removed Eric Dumazet
@ 2012-12-24 23:47 ` Woody Wu
0 siblings, 0 replies; 2+ messages in thread
From: Woody Wu @ 2012-12-24 23:47 UTC (permalink / raw)
To: Eric Dumazet; +Cc: kernelnewbies, linux-kernel, netdev
On Mon, Dec 24, 2012 at 11:16:27AM -0800, Eric Dumazet wrote:
> On Tue, 2012-12-25 at 00:30 +0800, Woody Wu wrote:
> > Hi, list
> >
> > I am porting an ethernet driver from 2.6.x to 3.7.1. I found in the new
> > kernel, the ndo_set_multicast_list method in the net_device_ops had been
> > removed. What's the story behind? Can I simply ignore this method
> > defined in an old driver?
> >
> > Please also help to check the below code, is the list of the operations
> > defined for my driver enough or not?
> >
> > const struct net_device_ops ax_netdev_ops = {
> > .ndo_open = mydriver_open,
> > .ndo_stop = mydriver_close,
> > .ndo_start_xmit = mydriver_start_xmit,
> > .ndo_get_stats = mydriver_get_stats,
> > /*.ndo_set_multicast_list = mydriver_set_multicast_list,*/
> > .ndo_set_mac_address = mydriver_set_mac_address,
> > };
> >
> > Thanks in advance.
> >
>
> Take a look at :
>
> commit afc4b13df143122f99a0eb10bfefb216c2806de0
> Author: Jiri Pirko <jpirko@redhat.com>
> Date: Tue Aug 16 06:29:01 2011 +0000
>
> net: remove use of ndo_set_multicast_list in drivers
>
> replace it by ndo_set_rx_mode
>
> Signed-off-by: Jiri Pirko <jpirko@redhat.com>
> Signed-off-by: David S. Miller <davem@davemloft.net>
>
>
Thanks for the info!
--
woody
I can't go back to yesterday - because I was a different person then.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-12-24 23:48 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20121224163005.GA3970@zuhnb712>
2012-12-24 19:16 ` Porting problem: ndo_set_multicast_list removed Eric Dumazet
2012-12-24 23:47 ` Woody Wu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox