* Re: Porting problem: ndo_set_multicast_list removed [not found] <20121224163005.GA3970@zuhnb712> @ 2012-12-24 19:16 ` Eric Dumazet 2012-12-24 23:47 ` Woody Wu 0 siblings, 1 reply; 2+ messages in thread From: Eric Dumazet @ 2012-12-24 19:16 UTC (permalink / raw) To: Woody Wu; +Cc: kernelnewbies, linux-kernel, netdev On Tue, 2012-12-25 at 00:30 +0800, Woody Wu wrote: > Hi, list > > I am porting an ethernet driver from 2.6.x to 3.7.1. I found in the new > kernel, the ndo_set_multicast_list method in the net_device_ops had been > removed. What's the story behind? Can I simply ignore this method > defined in an old driver? > > Please also help to check the below code, is the list of the operations > defined for my driver enough or not? > > const struct net_device_ops ax_netdev_ops = { > .ndo_open = mydriver_open, > .ndo_stop = mydriver_close, > .ndo_start_xmit = mydriver_start_xmit, > .ndo_get_stats = mydriver_get_stats, > /*.ndo_set_multicast_list = mydriver_set_multicast_list,*/ > .ndo_set_mac_address = mydriver_set_mac_address, > }; > > Thanks in advance. > Take a look at : commit afc4b13df143122f99a0eb10bfefb216c2806de0 Author: Jiri Pirko <jpirko@redhat.com> Date: Tue Aug 16 06:29:01 2011 +0000 net: remove use of ndo_set_multicast_list in drivers replace it by ndo_set_rx_mode Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> ^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Porting problem: ndo_set_multicast_list removed 2012-12-24 19:16 ` Porting problem: ndo_set_multicast_list removed Eric Dumazet @ 2012-12-24 23:47 ` Woody Wu 0 siblings, 0 replies; 2+ messages in thread From: Woody Wu @ 2012-12-24 23:47 UTC (permalink / raw) To: Eric Dumazet; +Cc: kernelnewbies, linux-kernel, netdev On Mon, Dec 24, 2012 at 11:16:27AM -0800, Eric Dumazet wrote: > On Tue, 2012-12-25 at 00:30 +0800, Woody Wu wrote: > > Hi, list > > > > I am porting an ethernet driver from 2.6.x to 3.7.1. I found in the new > > kernel, the ndo_set_multicast_list method in the net_device_ops had been > > removed. What's the story behind? Can I simply ignore this method > > defined in an old driver? > > > > Please also help to check the below code, is the list of the operations > > defined for my driver enough or not? > > > > const struct net_device_ops ax_netdev_ops = { > > .ndo_open = mydriver_open, > > .ndo_stop = mydriver_close, > > .ndo_start_xmit = mydriver_start_xmit, > > .ndo_get_stats = mydriver_get_stats, > > /*.ndo_set_multicast_list = mydriver_set_multicast_list,*/ > > .ndo_set_mac_address = mydriver_set_mac_address, > > }; > > > > Thanks in advance. > > > > Take a look at : > > commit afc4b13df143122f99a0eb10bfefb216c2806de0 > Author: Jiri Pirko <jpirko@redhat.com> > Date: Tue Aug 16 06:29:01 2011 +0000 > > net: remove use of ndo_set_multicast_list in drivers > > replace it by ndo_set_rx_mode > > Signed-off-by: Jiri Pirko <jpirko@redhat.com> > Signed-off-by: David S. Miller <davem@davemloft.net> > > Thanks for the info! -- woody I can't go back to yesterday - because I was a different person then. ^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-12-24 23:48 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20121224163005.GA3970@zuhnb712>
2012-12-24 19:16 ` Porting problem: ndo_set_multicast_list removed Eric Dumazet
2012-12-24 23:47 ` Woody Wu
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox