Netdev List
 help / color / mirror / Atom feed
From: Felipe Balbi <balbi@ti.com>
To: <davem@davemloft.net>
Cc: Tony Lindgren <tony@atomide.com>,
	Linux OMAP Mailing List <linux-omap@vger.kernel.org>,
	<mugunthanvnm@ti.com>, <netdev@vger.kernel.org>,
	Felipe Balbi <balbi@ti.com>
Subject: [patch-net-next 2/3] net: ethernet: cpsw: split out IRQ handler
Date: Tue, 13 Jan 2015 13:44:47 -0600	[thread overview]
Message-ID: <1421178288-7393-2-git-send-email-balbi@ti.com> (raw)
In-Reply-To: <1421178288-7393-1-git-send-email-balbi@ti.com>

Now we can introduce dedicated IRQ handlers
for each of the IRQ events. This helps with
cleaning up a little bit of the clutter in
cpsw_interrupt() while also making sure that
TX IRQs will try to handle TX buffers while
RX IRQs will try to handle RX buffers.

Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/net/ethernet/ti/cpsw.c | 41 ++++++++++++++++++++++++++++++-----------
 1 file changed, 30 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 6e04128b9543..c9081bdbbcbc 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -754,18 +754,36 @@ requeue:
 		dev_kfree_skb_any(new_skb);
 }
 
-static irqreturn_t cpsw_interrupt(int irq, void *dev_id)
+static irqreturn_t cpsw_dummy_interrupt(int irq, void *dev_id)
 {
 	struct cpsw_priv *priv = dev_id;
 	int value = irq - priv->irqs_table[0];
 
-	/* NOTICE: Ending IRQ here. The trick with the 'value' variable above
-	 * is to make sure we will always write the correct value to the EOI
-	 * register. Namely 0 for RX_THRESH Interrupt, 1 for RX Interrupt, 2
-	 * for TX Interrupt and 3 for MISC Interrupt.
-	 */
 	cpdma_ctlr_eoi(priv->dma, value);
 
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t cpsw_tx_interrupt(int irq, void *dev_id)
+{
+	struct cpsw_priv *priv = dev_id;
+
+	cpdma_ctlr_eoi(priv->dma, CPDMA_EOI_TX);
+	cpdma_chan_process(priv->txch, 128);
+
+	priv = cpsw_get_slave_priv(priv, 1);
+	if (priv)
+		cpdma_chan_process(priv->txch, 128);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t cpsw_rx_interrupt(int irq, void *dev_id)
+{
+	struct cpsw_priv *priv = dev_id;
+
+	cpdma_ctlr_eoi(priv->dma, CPDMA_EOI_RX);
+
 	cpsw_intr_disable(priv);
 	if (priv->irq_enabled == true) {
 		cpsw_disable_irq(priv);
@@ -1617,7 +1635,8 @@ static void cpsw_ndo_poll_controller(struct net_device *ndev)
 
 	cpsw_intr_disable(priv);
 	cpdma_ctlr_int_ctrl(priv->dma, false);
-	cpsw_interrupt(ndev->irq, priv);
+	cpsw_rx_interrupt(priv->irq[1], priv);
+	cpsw_tx_interrupt(priv->irq[2], priv);
 	cpdma_ctlr_int_ctrl(priv->dma, true);
 	cpsw_intr_enable(priv);
 }
@@ -2351,7 +2370,7 @@ static int cpsw_probe(struct platform_device *pdev)
 		goto clean_ale_ret;
 
 	priv->irqs_table[0] = irq;
-	ret = devm_request_irq(&pdev->dev, irq, cpsw_interrupt,
+	ret = devm_request_irq(&pdev->dev, irq, cpsw_dummy_interrupt,
 			0, dev_name(&pdev->dev), priv);
 	if (ret < 0) {
 		dev_err(priv->dev, "error attaching irq (%d)\n", ret);
@@ -2363,7 +2382,7 @@ static int cpsw_probe(struct platform_device *pdev)
 		goto clean_ale_ret;
 
 	priv->irqs_table[1] = irq;
-	ret = devm_request_irq(&pdev->dev, irq, cpsw_interrupt,
+	ret = devm_request_irq(&pdev->dev, irq, cpsw_rx_interrupt,
 			0, dev_name(&pdev->dev), priv);
 	if (ret < 0) {
 		dev_err(priv->dev, "error attaching irq (%d)\n", ret);
@@ -2375,7 +2394,7 @@ static int cpsw_probe(struct platform_device *pdev)
 		goto clean_ale_ret;
 
 	priv->irqs_table[2] = irq;
-	ret = devm_request_irq(&pdev->dev, irq, cpsw_interrupt,
+	ret = devm_request_irq(&pdev->dev, irq, cpsw_tx_interrupt,
 			0, dev_name(&pdev->dev), priv);
 	if (ret < 0) {
 		dev_err(priv->dev, "error attaching irq (%d)\n", ret);
@@ -2387,7 +2406,7 @@ static int cpsw_probe(struct platform_device *pdev)
 		goto clean_ale_ret;
 
 	priv->irqs_table[3] = irq;
-	ret = devm_request_irq(&pdev->dev, irq, cpsw_interrupt,
+	ret = devm_request_irq(&pdev->dev, irq, cpsw_dummy_interrupt,
 			0, dev_name(&pdev->dev), priv);
 	if (ret < 0) {
 		dev_err(priv->dev, "error attaching irq (%d)\n", ret);
-- 
2.2.0

  reply	other threads:[~2015-01-13 19:45 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-13 19:44 [patch-net-next 1/3] net: ethernet: cpsw: unroll IRQ request loop Felipe Balbi
2015-01-13 19:44 ` Felipe Balbi [this message]
2015-01-13 19:44 ` [patch-net-next 3/3] net: ethernet: cpsw: don't requests IRQs we don't use Felipe Balbi
2015-01-14  5:18 ` [patch-net-next 1/3] net: ethernet: cpsw: unroll IRQ request loop David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1421178288-7393-2-git-send-email-balbi@ti.com \
    --to=balbi@ti.com \
    --cc=davem@davemloft.net \
    --cc=linux-omap@vger.kernel.org \
    --cc=mugunthanvnm@ti.com \
    --cc=netdev@vger.kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox