From: Jarno Rajahalme <jarno-LZ6Gd1LRuIk@public.gmane.org>
To: netfilter-devel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: dev-yBygre7rU0TnMu66kgdUjQ@public.gmane.org,
netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH nf-next v9 2/8] netfilter: Allow calling into nat helper without skb_dst.
Date: Wed, 9 Mar 2016 15:10:18 -0800 [thread overview]
Message-ID: <1457565024-27300-2-git-send-email-jarno@ovn.org> (raw)
In-Reply-To: <1457565024-27300-1-git-send-email-jarno-LZ6Gd1LRuIk@public.gmane.org>
NAT checksum recalculation code assumes existence of skb_dst, which
becomes a problem for a later patch in the series ("openvswitch:
Interface with NAT."). Simplify this by removing the check on
skb_dst, as the checksum will be dealt with later in the stack.
Suggested-by: Pravin Shelar <pshelar@nicira.com>
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
---
net/ipv4/netfilter/nf_nat_l3proto_ipv4.c | 30 ++++++++----------------------
net/ipv6/netfilter/nf_nat_l3proto_ipv6.c | 30 ++++++++----------------------
2 files changed, 16 insertions(+), 44 deletions(-)
diff --git a/net/ipv4/netfilter/nf_nat_l3proto_ipv4.c b/net/ipv4/netfilter/nf_nat_l3proto_ipv4.c
index 61c7cc2..f8aad03 100644
--- a/net/ipv4/netfilter/nf_nat_l3proto_ipv4.c
+++ b/net/ipv4/netfilter/nf_nat_l3proto_ipv4.c
@@ -127,29 +127,15 @@ static void nf_nat_ipv4_csum_recalc(struct sk_buff *skb,
u8 proto, void *data, __sum16 *check,
int datalen, int oldlen)
{
- const struct iphdr *iph = ip_hdr(skb);
- struct rtable *rt = skb_rtable(skb);
-
if (skb->ip_summed != CHECKSUM_PARTIAL) {
- if (!(rt->rt_flags & RTCF_LOCAL) &&
- (!skb->dev || skb->dev->features &
- (NETIF_F_IP_CSUM | NETIF_F_HW_CSUM))) {
- skb->ip_summed = CHECKSUM_PARTIAL;
- skb->csum_start = skb_headroom(skb) +
- skb_network_offset(skb) +
- ip_hdrlen(skb);
- skb->csum_offset = (void *)check - data;
- *check = ~csum_tcpudp_magic(iph->saddr, iph->daddr,
- datalen, proto, 0);
- } else {
- *check = 0;
- *check = csum_tcpudp_magic(iph->saddr, iph->daddr,
- datalen, proto,
- csum_partial(data, datalen,
- 0));
- if (proto == IPPROTO_UDP && !*check)
- *check = CSUM_MANGLED_0;
- }
+ const struct iphdr *iph = ip_hdr(skb);
+
+ skb->ip_summed = CHECKSUM_PARTIAL;
+ skb->csum_start = skb_headroom(skb) + skb_network_offset(skb) +
+ ip_hdrlen(skb);
+ skb->csum_offset = (void *)check - data;
+ *check = ~csum_tcpudp_magic(iph->saddr, iph->daddr, datalen,
+ proto, 0);
} else
inet_proto_csum_replace2(check, skb,
htons(oldlen), htons(datalen), true);
diff --git a/net/ipv6/netfilter/nf_nat_l3proto_ipv6.c b/net/ipv6/netfilter/nf_nat_l3proto_ipv6.c
index 6ce3099..e0be97e 100644
--- a/net/ipv6/netfilter/nf_nat_l3proto_ipv6.c
+++ b/net/ipv6/netfilter/nf_nat_l3proto_ipv6.c
@@ -131,29 +131,15 @@ static void nf_nat_ipv6_csum_recalc(struct sk_buff *skb,
u8 proto, void *data, __sum16 *check,
int datalen, int oldlen)
{
- const struct ipv6hdr *ipv6h = ipv6_hdr(skb);
- struct rt6_info *rt = (struct rt6_info *)skb_dst(skb);
-
if (skb->ip_summed != CHECKSUM_PARTIAL) {
- if (!(rt->rt6i_flags & RTF_LOCAL) &&
- (!skb->dev || skb->dev->features &
- (NETIF_F_IPV6_CSUM | NETIF_F_HW_CSUM))) {
- skb->ip_summed = CHECKSUM_PARTIAL;
- skb->csum_start = skb_headroom(skb) +
- skb_network_offset(skb) +
- (data - (void *)skb->data);
- skb->csum_offset = (void *)check - data;
- *check = ~csum_ipv6_magic(&ipv6h->saddr, &ipv6h->daddr,
- datalen, proto, 0);
- } else {
- *check = 0;
- *check = csum_ipv6_magic(&ipv6h->saddr, &ipv6h->daddr,
- datalen, proto,
- csum_partial(data, datalen,
- 0));
- if (proto == IPPROTO_UDP && !*check)
- *check = CSUM_MANGLED_0;
- }
+ const struct ipv6hdr *ipv6h = ipv6_hdr(skb);
+
+ skb->ip_summed = CHECKSUM_PARTIAL;
+ skb->csum_start = skb_headroom(skb) + skb_network_offset(skb) +
+ (data - (void *)skb->data);
+ skb->csum_offset = (void *)check - data;
+ *check = ~csum_ipv6_magic(&ipv6h->saddr, &ipv6h->daddr,
+ datalen, proto, 0);
} else
inet_proto_csum_replace2(check, skb,
htons(oldlen), htons(datalen), true);
--
2.1.4
_______________________________________________
dev mailing list
dev@openvswitch.org
http://openvswitch.org/mailman/listinfo/dev
next prev parent reply other threads:[~2016-03-09 23:10 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-09 23:10 [PATCH nf-next v9 1/8] netfilter: Remove IP_CT_NEW_REPLY definition Jarno Rajahalme
2016-03-09 23:10 ` [PATCH nf-next v9 3/8] openvswitch: Add commentary to conntrack.c Jarno Rajahalme
[not found] ` <1457565024-27300-1-git-send-email-jarno-LZ6Gd1LRuIk@public.gmane.org>
2016-03-09 23:10 ` Jarno Rajahalme [this message]
2016-03-09 23:10 ` [PATCH nf-next v9 4/8] openvswitch: Update the CT state key only after nf_conntrack_in() Jarno Rajahalme
[not found] ` <1457565024-27300-4-git-send-email-jarno-LZ6Gd1LRuIk@public.gmane.org>
2016-03-10 2:12 ` Joe Stringer
2016-03-09 23:10 ` [PATCH nf-next v9 5/8] openvswitch: Find existing conntrack entry after upcall Jarno Rajahalme
[not found] ` <1457565024-27300-5-git-send-email-jarno-LZ6Gd1LRuIk@public.gmane.org>
2016-03-10 2:29 ` Joe Stringer
2016-03-09 23:10 ` [PATCH nf-next v9 6/8] openvswitch: Handle NF_REPEAT in conntrack action Jarno Rajahalme
2016-03-09 23:10 ` [PATCH nf-next v9 7/8] openvswitch: Delay conntrack helper call for new connections Jarno Rajahalme
[not found] ` <1457565024-27300-7-git-send-email-jarno-LZ6Gd1LRuIk@public.gmane.org>
2016-03-10 2:37 ` Joe Stringer
2016-03-09 23:10 ` [PATCH nf-next v9 8/8] openvswitch: Interface with NAT Jarno Rajahalme
[not found] ` <1457565024-27300-8-git-send-email-jarno-LZ6Gd1LRuIk@public.gmane.org>
2016-03-10 3:47 ` Joe Stringer
[not found] ` <CAPWQB7GkhrfZaaT-LkTP7Esfj4tzU=Fgto2ZaSq4YkurhOf8bw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-03-10 12:00 ` Thomas Graf
[not found] ` <20160310120021.GA26693-4EA/1caXOu0mYvmMESoHnA@public.gmane.org>
2016-03-10 18:45 ` Jarno Rajahalme
2016-03-10 18:55 ` Jarno Rajahalme
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1457565024-27300-2-git-send-email-jarno@ovn.org \
--to=jarno-lz6gd1lruik@public.gmane.org \
--cc=dev-yBygre7rU0TnMu66kgdUjQ@public.gmane.org \
--cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=netfilter-devel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox