Netdev List
 help / color / mirror / Atom feed
From: Huazhong Tan <tanhuazhong@huawei.com>
To: <davem@davemloft.net>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<huangdaode@hisilicon.com>, <yisen.zhuang@huawei.com>,
	<salil.mehta@huawei.com>, <linuxarm@huawei.com>,
	Yunsheng Lin <linyunsheng@huawei.com>,
	Peng Li <lipeng321@huawei.com>,
	Huazhong Tan <tanhuazhong@huawei.com>
Subject: [PATCH net-next 09/12] net: hns3: call hns3_nic_set_real_num_queue with netdev down
Date: Sun, 27 Jan 2019 00:49:18 +0800	[thread overview]
Message-ID: <20190126164921.3872-10-tanhuazhong@huawei.com> (raw)
In-Reply-To: <20190126164921.3872-1-tanhuazhong@huawei.com>

From: Yunsheng Lin <linyunsheng@huawei.com>

hns3_client_setup_tc in enet is for updating TC configuration to
stack, and hclge_setup_tc in hclge_dcb is mainly for setting the
configuration to hardware.

This patch removes the hns3_nic_set_real_num_queue from
hns3_setup_tc in enet, and call hclge_client_setup_tc to update
TC configuration to stack with netdev down, because the netdev
down operation is done in hclge_dcb now.

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
---
 .../net/ethernet/hisilicon/hns3/hns3_enet.c    |  7 +------
 .../ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c | 18 ++++++++++++------
 2 files changed, 13 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 0ecaeab2dad4..93e3e38ba852 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -1482,7 +1482,6 @@ static int hns3_setup_tc(struct net_device *netdev, void *type_data)
 	u8 tc = mqprio_qopt->qopt.num_tc;
 	u16 mode = mqprio_qopt->mode;
 	u8 hw = mqprio_qopt->qopt.hw;
-	int ret;
 
 	if (!((hw == TC_MQPRIO_HW_OFFLOAD_TCS &&
 	       mode == TC_MQPRIO_MODE_CHANNEL) || (!hw && tc == 0)))
@@ -1494,12 +1493,8 @@ static int hns3_setup_tc(struct net_device *netdev, void *type_data)
 	if (!netdev)
 		return -EINVAL;
 
-	ret = (kinfo->dcb_ops && kinfo->dcb_ops->setup_tc) ?
+	return (kinfo->dcb_ops && kinfo->dcb_ops->setup_tc) ?
 		kinfo->dcb_ops->setup_tc(h, tc, prio_tc) : -EOPNOTSUPP;
-	if (ret)
-		return ret;
-
-	return hns3_nic_set_real_num_queue(netdev);
 }
 
 static int hns3_nic_setup_tc(struct net_device *dev, enum tc_setup_type type,
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c
index de8e38cca507..961aedb0e20f 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c
@@ -384,13 +384,12 @@ static int hclge_setup_tc(struct hnae3_handle *h, u8 tc, u8 *prio_tc)
 	hclge_tm_prio_tc_info_update(hdev, prio_tc);
 
 	ret = hclge_tm_init_hw(hdev, false);
-	if (ret) {
-		if (hclge_notify_client(hdev, HNAE3_INIT_CLIENT))
-			return ret;
+	if (ret)
+		goto err_out;
 
-		hclge_notify_client(hdev, HNAE3_UP_CLIENT);
-		return ret;
-	}
+	ret = hclge_client_setup_tc(hdev);
+	if (ret)
+		goto err_out;
 
 	hdev->flag &= ~HCLGE_FLAG_DCB_ENABLE;
 
@@ -404,6 +403,13 @@ static int hclge_setup_tc(struct hnae3_handle *h, u8 tc, u8 *prio_tc)
 		return ret;
 
 	return hclge_notify_client(hdev, HNAE3_UP_CLIENT);
+
+err_out:
+	if (hclge_notify_client(hdev, HNAE3_INIT_CLIENT))
+		return ret;
+
+	hclge_notify_client(hdev, HNAE3_UP_CLIENT);
+	return ret;
 }
 
 static const struct hnae3_dcb_ops hns3_dcb_ops = {
-- 
2.20.1



  parent reply	other threads:[~2019-01-26 16:51 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-26 16:49 [PATCH net-next 00/12] code optimizations & bugfixes for HNS3 driver Huazhong Tan
2019-01-26 16:49 ` [PATCH net-next 01/12] net: hns3: don't update packet statistics for packets dropped by hardware Huazhong Tan
2019-01-26 16:49 ` [PATCH net-next 02/12] net: hns3: clear pci private data when unload hns3 driver Huazhong Tan
2019-01-26 16:49 ` [PATCH net-next 03/12] net: hns3: add error handling in hclge_ieee_setets Huazhong Tan
2019-01-26 16:49 ` [PATCH net-next 04/12] net: hns3: fix return value handle issue for hclge_set_loopback() Huazhong Tan
2019-01-26 16:49 ` [PATCH net-next 05/12] net: hns3: fix broadcast promisc issue for revision 0x20 Huazhong Tan
2019-01-26 16:49 ` [PATCH net-next 06/12] net: hns3: After setting the loopback, add the status of getting MAC Huazhong Tan
2019-01-26 16:49 ` [PATCH net-next 07/12] net: hns3: do reinitialization while mqprio configuration changed Huazhong Tan
2019-01-26 16:49 ` [PATCH net-next 08/12] net: hns3: remove dcb_ops->map_update in hclge_dcb Huazhong Tan
2019-01-26 16:49 ` Huazhong Tan [this message]
2019-01-26 16:49 ` [PATCH net-next 10/12] net: hns3: add 8 BD limit for tx flow Huazhong Tan
2019-01-26 16:49 ` [PATCH net-next 11/12] net: hns3: add initialization for nic state Huazhong Tan
2019-01-26 16:49 ` [PATCH net-next 12/12] net: hns3: don't allow vf to enable promisc mode Huazhong Tan
2019-01-26 17:33 ` [PATCH net-next 00/12] code optimizations & bugfixes for HNS3 driver David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190126164921.3872-10-tanhuazhong@huawei.com \
    --to=tanhuazhong@huawei.com \
    --cc=davem@davemloft.net \
    --cc=huangdaode@hisilicon.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxarm@huawei.com \
    --cc=linyunsheng@huawei.com \
    --cc=lipeng321@huawei.com \
    --cc=netdev@vger.kernel.org \
    --cc=salil.mehta@huawei.com \
    --cc=yisen.zhuang@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox