From: Huazhong Tan <tanhuazhong@huawei.com>
To: <davem@davemloft.net>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<huangdaode@hisilicon.com>, <yisen.zhuang@huawei.com>,
<salil.mehta@huawei.com>, <linuxarm@huawei.com>,
Jian Shen <shenjian15@huawei.com>,
Huazhong Tan <tanhuazhong@huawei.com>
Subject: [PATCH net-next 12/12] net: hns3: don't allow vf to enable promisc mode
Date: Sun, 27 Jan 2019 00:49:21 +0800 [thread overview]
Message-ID: <20190126164921.3872-13-tanhuazhong@huawei.com> (raw)
In-Reply-To: <20190126164921.3872-1-tanhuazhong@huawei.com>
From: Jian Shen <shenjian15@huawei.com>
VF can receive packets of other functions when in promisc
mode. It's not safe, so don't allow VF to enable promisc
mode.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
---
.../hisilicon/hns3/hns3pf/hclge_mbx.c | 7 ++--
.../hisilicon/hns3/hns3vf/hclgevf_main.c | 32 +++++++++++--------
2 files changed, 21 insertions(+), 18 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
index a1de451a85df..3603034aa45c 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
@@ -203,12 +203,11 @@ static int hclge_map_unmap_ring_to_vf_vector(struct hclge_vport *vport, bool en,
static int hclge_set_vf_promisc_mode(struct hclge_vport *vport,
struct hclge_mbx_vf_to_pf_cmd *req)
{
- bool en_uc = req->msg[1] ? true : false;
- bool en_mc = req->msg[2] ? true : false;
+ bool en_bc = req->msg[1] ? true : false;
struct hclge_promisc_param param;
- /* always enable broadcast promisc bit */
- hclge_promisc_param_init(¶m, en_uc, en_mc, true, vport->vport_id);
+ /* vf is not allowed to enable unicast/multicast broadcast */
+ hclge_promisc_param_init(¶m, false, false, en_bc, vport->vport_id);
return hclge_cmd_set_promisc_mode(vport->back, ¶m);
}
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
index 24b54083b5f9..fc99a0c70164 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
@@ -969,33 +969,29 @@ static int hclgevf_put_vector(struct hnae3_handle *handle, int vector)
}
static int hclgevf_cmd_set_promisc_mode(struct hclgevf_dev *hdev,
- bool en_uc_pmc, bool en_mc_pmc)
+ bool en_bc_pmc)
{
struct hclge_mbx_vf_to_pf_cmd *req;
struct hclgevf_desc desc;
- int status;
+ int ret;
req = (struct hclge_mbx_vf_to_pf_cmd *)desc.data;
hclgevf_cmd_setup_basic_desc(&desc, HCLGEVF_OPC_MBX_VF_TO_PF, false);
req->msg[0] = HCLGE_MBX_SET_PROMISC_MODE;
- req->msg[1] = en_uc_pmc ? 1 : 0;
- req->msg[2] = en_mc_pmc ? 1 : 0;
+ req->msg[1] = en_bc_pmc ? 1 : 0;
- status = hclgevf_cmd_send(&hdev->hw, &desc, 1);
- if (status)
+ ret = hclgevf_cmd_send(&hdev->hw, &desc, 1);
+ if (ret)
dev_err(&hdev->pdev->dev,
- "Set promisc mode fail, status is %d.\n", status);
+ "Set promisc mode fail, status is %d.\n", ret);
- return status;
+ return ret;
}
-static int hclgevf_set_promisc_mode(struct hnae3_handle *handle,
- bool en_uc_pmc, bool en_mc_pmc)
+static int hclgevf_set_promisc_mode(struct hclgevf_dev *hdev, bool en_bc_pmc)
{
- struct hclgevf_dev *hdev = hclgevf_ae_get_hdev(handle);
-
- return hclgevf_cmd_set_promisc_mode(hdev, en_uc_pmc, en_mc_pmc);
+ return hclgevf_cmd_set_promisc_mode(hdev, en_bc_pmc);
}
static int hclgevf_tqp_enable(struct hclgevf_dev *hdev, int tqp_id,
@@ -2382,6 +2378,15 @@ static int hclgevf_init_hdev(struct hclgevf_dev *hdev)
if (ret)
goto err_config;
+ /* vf is not allowed to enable unicast/multicast promisc mode.
+ * For revision 0x20, default to disable broadcast promisc mode,
+ * firmware makes sure broadcast packets can be accepted.
+ * For revision 0x21, default to enable broadcast promisc mode.
+ */
+ ret = hclgevf_set_promisc_mode(hdev, true);
+ if (ret)
+ goto err_config;
+
/* Initialize RSS for this VF */
ret = hclgevf_rss_init_hw(hdev);
if (ret) {
@@ -2646,7 +2651,6 @@ static const struct hnae3_ae_ops hclgevf_ops = {
.get_vector = hclgevf_get_vector,
.put_vector = hclgevf_put_vector,
.reset_queue = hclgevf_reset_tqp,
- .set_promisc_mode = hclgevf_set_promisc_mode,
.get_mac_addr = hclgevf_get_mac_addr,
.set_mac_addr = hclgevf_set_mac_addr,
.add_uc_addr = hclgevf_add_uc_addr,
--
2.20.1
next prev parent reply other threads:[~2019-01-26 16:50 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-26 16:49 [PATCH net-next 00/12] code optimizations & bugfixes for HNS3 driver Huazhong Tan
2019-01-26 16:49 ` [PATCH net-next 01/12] net: hns3: don't update packet statistics for packets dropped by hardware Huazhong Tan
2019-01-26 16:49 ` [PATCH net-next 02/12] net: hns3: clear pci private data when unload hns3 driver Huazhong Tan
2019-01-26 16:49 ` [PATCH net-next 03/12] net: hns3: add error handling in hclge_ieee_setets Huazhong Tan
2019-01-26 16:49 ` [PATCH net-next 04/12] net: hns3: fix return value handle issue for hclge_set_loopback() Huazhong Tan
2019-01-26 16:49 ` [PATCH net-next 05/12] net: hns3: fix broadcast promisc issue for revision 0x20 Huazhong Tan
2019-01-26 16:49 ` [PATCH net-next 06/12] net: hns3: After setting the loopback, add the status of getting MAC Huazhong Tan
2019-01-26 16:49 ` [PATCH net-next 07/12] net: hns3: do reinitialization while mqprio configuration changed Huazhong Tan
2019-01-26 16:49 ` [PATCH net-next 08/12] net: hns3: remove dcb_ops->map_update in hclge_dcb Huazhong Tan
2019-01-26 16:49 ` [PATCH net-next 09/12] net: hns3: call hns3_nic_set_real_num_queue with netdev down Huazhong Tan
2019-01-26 16:49 ` [PATCH net-next 10/12] net: hns3: add 8 BD limit for tx flow Huazhong Tan
2019-01-26 16:49 ` [PATCH net-next 11/12] net: hns3: add initialization for nic state Huazhong Tan
2019-01-26 16:49 ` Huazhong Tan [this message]
2019-01-26 17:33 ` [PATCH net-next 00/12] code optimizations & bugfixes for HNS3 driver David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190126164921.3872-13-tanhuazhong@huawei.com \
--to=tanhuazhong@huawei.com \
--cc=davem@davemloft.net \
--cc=huangdaode@hisilicon.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=netdev@vger.kernel.org \
--cc=salil.mehta@huawei.com \
--cc=shenjian15@huawei.com \
--cc=yisen.zhuang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox