From: Huazhong Tan <tanhuazhong@huawei.com>
To: <davem@davemloft.net>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<huangdaode@hisilicon.com>, <yisen.zhuang@huawei.com>,
<salil.mehta@huawei.com>, <linuxarm@huawei.com>,
Yunsheng Lin <linyunsheng@huawei.com>,
Peng Li <lipeng321@huawei.com>,
Huazhong Tan <tanhuazhong@huawei.com>
Subject: [PATCH net-next 07/12] net: hns3: do reinitialization while mqprio configuration changed
Date: Sun, 27 Jan 2019 00:49:16 +0800 [thread overview]
Message-ID: <20190126164921.3872-8-tanhuazhong@huawei.com> (raw)
In-Reply-To: <20190126164921.3872-1-tanhuazhong@huawei.com>
From: Yunsheng Lin <linyunsheng@huawei.com>
When user changes the mqprio configuration, enet need to be
uninited and inited besides down'ed and up'ed, because the queue
num may change when the TC num changes.
Also, it is more suitable to do the down/unint/init/up operation
in hclge module using hclge_notify_client, because this config
change may affect PF and its VF.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
---
.../net/ethernet/hisilicon/hns3/hns3_enet.c | 17 ++-------------
.../hisilicon/hns3/hns3pf/hclge_dcb.c | 21 +++++++++++++++++--
2 files changed, 21 insertions(+), 17 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 322af28ab4b5..927a980fc211 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -1482,7 +1482,6 @@ static int hns3_setup_tc(struct net_device *netdev, void *type_data)
u8 tc = mqprio_qopt->qopt.num_tc;
u16 mode = mqprio_qopt->mode;
u8 hw = mqprio_qopt->qopt.hw;
- bool if_running;
int ret;
if (!((hw == TC_MQPRIO_HW_OFFLOAD_TCS &&
@@ -1495,24 +1494,12 @@ static int hns3_setup_tc(struct net_device *netdev, void *type_data)
if (!netdev)
return -EINVAL;
- if_running = netif_running(netdev);
- if (if_running) {
- hns3_nic_net_stop(netdev);
- msleep(100);
- }
-
ret = (kinfo->dcb_ops && kinfo->dcb_ops->setup_tc) ?
kinfo->dcb_ops->setup_tc(h, tc, prio_tc) : -EOPNOTSUPP;
if (ret)
- goto out;
-
- ret = hns3_nic_set_real_num_queue(netdev);
-
-out:
- if (if_running)
- hns3_nic_net_open(netdev);
+ return ret;
- return ret;
+ return hns3_nic_set_real_num_queue(netdev);
}
static int hns3_nic_setup_tc(struct net_device *dev, enum tc_setup_type type,
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c
index 90b566e8e454..6c387b21f882 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c
@@ -370,12 +370,25 @@ static int hclge_setup_tc(struct hnae3_handle *h, u8 tc, u8 *prio_tc)
if (ret)
return -EINVAL;
+ ret = hclge_notify_client(hdev, HNAE3_DOWN_CLIENT);
+ if (ret)
+ return ret;
+
+ ret = hclge_notify_client(hdev, HNAE3_UNINIT_CLIENT);
+ if (ret)
+ return ret;
+
hclge_tm_schd_info_update(hdev, tc);
hclge_tm_prio_tc_info_update(hdev, prio_tc);
ret = hclge_tm_init_hw(hdev, false);
- if (ret)
+ if (ret) {
+ if (hclge_notify_client(hdev, HNAE3_INIT_CLIENT))
+ return ret;
+
+ hclge_notify_client(hdev, HNAE3_UP_CLIENT);
return ret;
+ }
hdev->flag &= ~HCLGE_FLAG_DCB_ENABLE;
@@ -384,7 +397,11 @@ static int hclge_setup_tc(struct hnae3_handle *h, u8 tc, u8 *prio_tc)
else
hdev->flag &= ~HCLGE_FLAG_MQPRIO_ENABLE;
- return 0;
+ ret = hclge_notify_client(hdev, HNAE3_INIT_CLIENT);
+ if (ret)
+ return ret;
+
+ return hclge_notify_client(hdev, HNAE3_UP_CLIENT);
}
static const struct hnae3_dcb_ops hns3_dcb_ops = {
--
2.20.1
next prev parent reply other threads:[~2019-01-26 16:50 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-26 16:49 [PATCH net-next 00/12] code optimizations & bugfixes for HNS3 driver Huazhong Tan
2019-01-26 16:49 ` [PATCH net-next 01/12] net: hns3: don't update packet statistics for packets dropped by hardware Huazhong Tan
2019-01-26 16:49 ` [PATCH net-next 02/12] net: hns3: clear pci private data when unload hns3 driver Huazhong Tan
2019-01-26 16:49 ` [PATCH net-next 03/12] net: hns3: add error handling in hclge_ieee_setets Huazhong Tan
2019-01-26 16:49 ` [PATCH net-next 04/12] net: hns3: fix return value handle issue for hclge_set_loopback() Huazhong Tan
2019-01-26 16:49 ` [PATCH net-next 05/12] net: hns3: fix broadcast promisc issue for revision 0x20 Huazhong Tan
2019-01-26 16:49 ` [PATCH net-next 06/12] net: hns3: After setting the loopback, add the status of getting MAC Huazhong Tan
2019-01-26 16:49 ` Huazhong Tan [this message]
2019-01-26 16:49 ` [PATCH net-next 08/12] net: hns3: remove dcb_ops->map_update in hclge_dcb Huazhong Tan
2019-01-26 16:49 ` [PATCH net-next 09/12] net: hns3: call hns3_nic_set_real_num_queue with netdev down Huazhong Tan
2019-01-26 16:49 ` [PATCH net-next 10/12] net: hns3: add 8 BD limit for tx flow Huazhong Tan
2019-01-26 16:49 ` [PATCH net-next 11/12] net: hns3: add initialization for nic state Huazhong Tan
2019-01-26 16:49 ` [PATCH net-next 12/12] net: hns3: don't allow vf to enable promisc mode Huazhong Tan
2019-01-26 17:33 ` [PATCH net-next 00/12] code optimizations & bugfixes for HNS3 driver David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190126164921.3872-8-tanhuazhong@huawei.com \
--to=tanhuazhong@huawei.com \
--cc=davem@davemloft.net \
--cc=huangdaode@hisilicon.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=linyunsheng@huawei.com \
--cc=lipeng321@huawei.com \
--cc=netdev@vger.kernel.org \
--cc=salil.mehta@huawei.com \
--cc=yisen.zhuang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox