[PATCH net-next 1/4 v4] net: dsa: rtl8366rb: Support disabling learning

[Linus Walleij <linus.walleij@linaro.org>]

The RTL8366RB hardware supports disabling learning per-port
so let's make use of this feature. Rename some unfortunately
named registers in the process.

Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Cc: Alvin Šipraga <alsi@bang-olufsen.dk>
Cc: Mauri Sandberg <sandberg@mailfence.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: DENG Qingfang <dqfext@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v3->v4:
- No changes, rebased on other patches.
ChangeLog v2->v3:
- Disable learning by default, learning will be turned
  on selectively using the callback.
ChangeLog v1->v2:
- New patch suggested by Vladimir.
---
 drivers/net/dsa/rtl8366rb.c | 50 ++++++++++++++++++++++++++++++++-----
 1 file changed, 44 insertions(+), 6 deletions(-)

diff --git a/drivers/net/dsa/rtl8366rb.c b/drivers/net/dsa/rtl8366rb.c
index bb9d017c2f9f..b3056064b937 100644
--- a/drivers/net/dsa/rtl8366rb.c
+++ b/drivers/net/dsa/rtl8366rb.c
@@ -14,6 +14,7 @@
 
 #include <linux/bitops.h>
 #include <linux/etherdevice.h>
+#include <linux/if_bridge.h>
 #include <linux/interrupt.h>
 #include <linux/irqdomain.h>
 #include <linux/irqchip/chained_irq.h>
@@ -42,9 +43,12 @@
 /* Port Enable Control register */
 #define RTL8366RB_PECR				0x0001
 
-/* Switch Security Control registers */
-#define RTL8366RB_SSCR0				0x0002
-#define RTL8366RB_SSCR1				0x0003
+/* Switch per-port learning disablement register */
+#define RTL8366RB_PORT_LEARNDIS_CTRL		0x0002
+
+/* Security control, actually aging register */
+#define RTL8366RB_SECURITY_CTRL			0x0003
+
 #define RTL8366RB_SSCR2				0x0004
 #define RTL8366RB_SSCR2_DROP_UNKNOWN_DA		BIT(0)
 
@@ -927,13 +931,14 @@ static int rtl8366rb_setup(struct dsa_switch *ds)
 		/* layer 2 size, see rtl8366rb_change_mtu() */
 		rb->max_mtu[i] = 1532;
 
-	/* Enable learning for all ports */
-	ret = regmap_write(smi->map, RTL8366RB_SSCR0, 0);
+	/* Disable learning for all ports */
+	ret = regmap_write(smi->map, RTL8366RB_PORT_LEARNDIS_CTRL,
+			   RTL8366RB_PORT_ALL);
 	if (ret)
 		return ret;
 
 	/* Enable auto ageing for all ports */
-	ret = regmap_write(smi->map, RTL8366RB_SSCR1, 0);
+	ret = regmap_write(smi->map, RTL8366RB_SECURITY_CTRL, 0);
 	if (ret)
 		return ret;
 
@@ -1272,6 +1277,37 @@ static int rtl8366rb_vlan_filtering(struct dsa_switch *ds, int port,
 	return ret;
 }
 
+static int
+rtl8366rb_port_pre_bridge_flags(struct dsa_switch *ds, int port,
+				struct switchdev_brport_flags flags,
+				struct netlink_ext_ack *extack)
+{
+	/* We support enabling/disabling learning */
+	if (flags.mask & ~(BR_LEARNING))
+		return -EINVAL;
+
+	return 0;
+}
+
+static int
+rtl8366rb_port_bridge_flags(struct dsa_switch *ds, int port,
+			    struct switchdev_brport_flags flags,
+			    struct netlink_ext_ack *extack)
+{
+	struct realtek_smi *smi = ds->priv;
+	int ret;
+
+	if (flags.mask & BR_LEARNING) {
+		ret = regmap_update_bits(smi->map, RTL8366RB_PORT_LEARNDIS_CTRL,
+					 BIT(port),
+					 (flags.val & BR_LEARNING) ? 0 : BIT(port));
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
 static int rtl8366rb_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
 {
 	struct realtek_smi *smi = ds->priv;
@@ -1682,6 +1718,8 @@ static const struct dsa_switch_ops rtl8366rb_switch_ops = {
 	.port_vlan_del = rtl8366_vlan_del,
 	.port_enable = rtl8366rb_port_enable,
 	.port_disable = rtl8366rb_port_disable,
+	.port_pre_bridge_flags = rtl8366rb_port_pre_bridge_flags,
+	.port_bridge_flags = rtl8366rb_port_bridge_flags,
 	.port_change_mtu = rtl8366rb_change_mtu,
 	.port_max_mtu = rtl8366rb_max_mtu,
 };
-- 
2.31.1