[PATCH iproute2 0/3] Multiple Spanning Tree (MST) Support

[Tobias Waldekranz <tobias@waldekranz.com>]

This series adds support for:

- Enabling MST on a bridge:

      ip link set dev <BR> type bridge mst_enable 1

- (Re)associating VLANs with an MSTI:

      bridge vlan global set dev <BR> vid <X> msti <Y>

- Setting the port state in a given MSTI:

      bridge mst set dev <PORT> msti <Y> state <Z>

- Listing the current port MST states:

      bridge mst show

NOTE: Multiple spanning tree support was added to Linux a couple of
years ago[1], but the corresponding iproute2 patches were never
posted. Mea culpa. Yesterday this was brought to my attention[2],
which is why you are seeing them today.

[1]: https://lore.kernel.org/netdev/20220316150857.2442916-1-tobias@waldekranz.com/
[2]: https://lore.kernel.org/netdev/Zmsc54cVKF1wpzj7@Laptop-X1/

Tobias Waldekranz (3):
  ip: bridge: add support for mst_enabled
  bridge: vlan: Add support for setting a VLANs MSTI
  bridge: mst: Add get/set support for MST states

 bridge/Makefile       |   2 +-
 bridge/br_common.h    |   1 +
 bridge/bridge.c       |   3 +-
 bridge/mst.c          | 262 ++++++++++++++++++++++++++++++++++++++++++
 bridge/vlan.c         |  13 +++
 ip/iplink_bridge.c    |  19 +++
 man/man8/bridge.8     |  66 ++++++++++-
 man/man8/ip-link.8.in |  14 +++
 8 files changed, 377 insertions(+), 3 deletions(-)
 create mode 100644 bridge/mst.c

-- 
2.34.1