From: Jijie Shao <shaojijie@huawei.com>
To: <yisen.zhuang@huawei.com>, <salil.mehta@huawei.com>,
<davem@davemloft.net>, <edumazet@google.com>, <kuba@kernel.org>,
<pabeni@redhat.com>, <horms@kernel.org>
Cc: <shenjian15@huawei.com>, <wangpeiyang1@huawei.com>,
<liuyonglong@huawei.com>, <shaojijie@huawei.com>,
<sudongming1@huawei.com>, <xujunsheng@huawei.com>,
<shiyongbang@huawei.com>, <netdev@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Subject: [RFC PATCH net-next 00/10] Add support of HIBMCGE Ethernet Driver
Date: Wed, 31 Jul 2024 17:42:35 +0800 [thread overview]
Message-ID: <20240731094245.1967834-1-shaojijie@huawei.com> (raw)
This patch set adds the support of Hisilicon BMC Gigabit Ethernet Driver.
This patch set includes basic Rx/Tx functionality. It also includes
the registration and interrupt codes.
This work provides the initial support to the HIBMCGE and
would incrementally add features or enhancements.
Jijie Shao (10):
net: hibmcge: Add pci table supported in this module
net: hibmcge: Add read/write registers supported through the bar space
net: hibmcge: Add mdio and hardware configuration supported in this
module
net: hibmcge: Add interrupt supported in this module
net: hibmcge: Implement some .ndo functions
net: hibmcge: Implement .ndo_start_xmit function
net: hibmcge: Implement rx_poll function to receive packets
net: hibmcge: Implement workqueue and some ethtool_ops functions
net: hibmcge: Add a Makefile and update Kconfig for hibmcge
net: hibmcge: Add maintainer for hibmcge
MAINTAINERS | 7 +
drivers/net/ethernet/hisilicon/Kconfig | 17 +-
drivers/net/ethernet/hisilicon/Makefile | 1 +
.../net/ethernet/hisilicon/hibmcge/Makefile | 10 +
.../ethernet/hisilicon/hibmcge/hbg_common.h | 152 +++++++
.../ethernet/hisilicon/hibmcge/hbg_ethtool.c | 56 +++
.../ethernet/hisilicon/hibmcge/hbg_ethtool.h | 11 +
.../net/ethernet/hisilicon/hibmcge/hbg_hw.c | 369 ++++++++++++++++
.../net/ethernet/hisilicon/hibmcge/hbg_hw.h | 78 ++++
.../net/ethernet/hisilicon/hibmcge/hbg_irq.c | 205 +++++++++
.../net/ethernet/hisilicon/hibmcge/hbg_irq.h | 13 +
.../net/ethernet/hisilicon/hibmcge/hbg_main.c | 362 ++++++++++++++++
.../net/ethernet/hisilicon/hibmcge/hbg_main.h | 14 +
.../net/ethernet/hisilicon/hibmcge/hbg_mdio.c | 276 ++++++++++++
.../net/ethernet/hisilicon/hibmcge/hbg_mdio.h | 13 +
.../net/ethernet/hisilicon/hibmcge/hbg_reg.h | 115 +++++
.../hisilicon/hibmcge/hbg_reg_union.h | 266 ++++++++++++
.../net/ethernet/hisilicon/hibmcge/hbg_txrx.c | 410 ++++++++++++++++++
.../net/ethernet/hisilicon/hibmcge/hbg_txrx.h | 37 ++
19 files changed, 2411 insertions(+), 1 deletion(-)
create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/Makefile
create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_common.h
create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_ethtool.c
create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_ethtool.h
create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_hw.c
create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_hw.h
create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_irq.c
create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_irq.h
create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_main.c
create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_main.h
create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_mdio.c
create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_mdio.h
create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_reg.h
create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_reg_union.h
create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_txrx.c
create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_txrx.h
--
2.33.0
next reply other threads:[~2024-07-31 9:48 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-31 9:42 Jijie Shao [this message]
2024-07-31 9:42 ` [RFC PATCH net-next 01/10] net: hibmcge: Add pci table supported in this module Jijie Shao
2024-07-31 9:42 ` [RFC PATCH net-next 02/10] net: hibmcge: Add read/write registers supported through the bar space Jijie Shao
2024-08-05 12:55 ` Simon Horman
2024-08-05 13:08 ` Jijie Shao
2024-07-31 9:42 ` [RFC PATCH net-next 03/10] net: hibmcge: Add mdio and hardware configuration supported in this module Jijie Shao
2024-08-01 0:42 ` Andrew Lunn
2024-08-01 9:04 ` Jijie Shao
2024-08-01 12:07 ` Andrew Lunn
2024-07-31 9:42 ` [RFC PATCH net-next 04/10] net: hibmcge: Add interrupt " Jijie Shao
2024-07-31 13:14 ` Joe Damato
2024-08-01 11:31 ` Jijie Shao
2024-08-05 12:57 ` Simon Horman
2024-08-05 13:29 ` Jijie Shao
2024-07-31 9:42 ` [RFC PATCH net-next 05/10] net: hibmcge: Implement some .ndo functions Jijie Shao
2024-08-01 0:51 ` Andrew Lunn
2024-08-01 9:13 ` Jijie Shao
2024-08-01 12:18 ` Andrew Lunn
2024-08-01 12:33 ` Jijie Shao
2024-08-01 12:36 ` Andrew Lunn
2024-08-01 13:08 ` Jijie Shao
2024-07-31 9:42 ` [RFC PATCH net-next 06/10] net: hibmcge: Implement .ndo_start_xmit function Jijie Shao
2024-07-31 9:42 ` [RFC PATCH net-next 07/10] net: hibmcge: Implement rx_poll function to receive packets Jijie Shao
2024-07-31 13:23 ` Joe Damato
2024-08-01 11:58 ` Jijie Shao
2024-07-31 9:42 ` [RFC PATCH net-next 08/10] net: hibmcge: Implement workqueue and some ethtool_ops functions Jijie Shao
2024-08-01 1:10 ` Andrew Lunn
2024-08-01 11:10 ` Jijie Shao
2024-08-01 12:26 ` Andrew Lunn
2024-08-01 13:06 ` Jijie Shao
2024-08-01 20:16 ` Andrew Lunn
2024-07-31 9:42 ` [RFC PATCH net-next 09/10] net: hibmcge: Add a Makefile and update Kconfig for hibmcge Jijie Shao
2024-08-01 1:13 ` Andrew Lunn
2024-08-01 12:15 ` Jijie Shao
2024-08-01 12:33 ` Andrew Lunn
2024-07-31 9:42 ` [RFC PATCH net-next 10/10] net: hibmcge: Add maintainer " Jijie Shao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240731094245.1967834-1-shaojijie@huawei.com \
--to=shaojijie@huawei.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=liuyonglong@huawei.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=salil.mehta@huawei.com \
--cc=shenjian15@huawei.com \
--cc=shiyongbang@huawei.com \
--cc=sudongming1@huawei.com \
--cc=wangpeiyang1@huawei.com \
--cc=xujunsheng@huawei.com \
--cc=yisen.zhuang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox