public inbox for netdev@vger.kernel.org
 help / color / mirror / Atom feed
From: Jijie Shao <shaojijie@huawei.com>
To: <yisen.zhuang@huawei.com>, <salil.mehta@huawei.com>,
	<davem@davemloft.net>, <edumazet@google.com>, <kuba@kernel.org>,
	<pabeni@redhat.com>, <horms@kernel.org>
Cc: <shenjian15@huawei.com>, <wangpeiyang1@huawei.com>,
	<liuyonglong@huawei.com>, <shaojijie@huawei.com>,
	<sudongming1@huawei.com>, <xujunsheng@huawei.com>,
	<shiyongbang@huawei.com>, <netdev@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>
Subject: [RFC PATCH net-next 09/10] net: hibmcge: Add a Makefile and update Kconfig for hibmcge
Date: Wed, 31 Jul 2024 17:42:44 +0800	[thread overview]
Message-ID: <20240731094245.1967834-10-shaojijie@huawei.com> (raw)
In-Reply-To: <20240731094245.1967834-1-shaojijie@huawei.com>

Add a Makefile and update Kconfig to build hibmcge driver.

Signed-off-by: Jijie Shao <shaojijie@huawei.com>
---
 drivers/net/ethernet/hisilicon/Kconfig          | 17 ++++++++++++++++-
 drivers/net/ethernet/hisilicon/Makefile         |  1 +
 drivers/net/ethernet/hisilicon/hibmcge/Makefile | 10 ++++++++++
 3 files changed, 27 insertions(+), 1 deletion(-)
 create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/Makefile

diff --git a/drivers/net/ethernet/hisilicon/Kconfig b/drivers/net/ethernet/hisilicon/Kconfig
index 3312e1d93c3b..372854d15481 100644
--- a/drivers/net/ethernet/hisilicon/Kconfig
+++ b/drivers/net/ethernet/hisilicon/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_HISILICON
 	bool "Hisilicon devices"
 	default y
 	depends on OF || ACPI
-	depends on ARM || ARM64 || COMPILE_TEST
+	depends on ARM || ARM64 || COMPILE_TEST || X86_64
 	help
 	  If you have a network (Ethernet) card belonging to this class, say Y.
 
@@ -18,6 +18,8 @@ config NET_VENDOR_HISILICON
 
 if NET_VENDOR_HISILICON
 
+if ARM || ARM64 || COMPILE_TEST
+
 config HIX5HD2_GMAC
 	tristate "Hisilicon HIX5HD2 Family Network Device Support"
 	select PHYLIB
@@ -141,4 +143,17 @@ config HNS3_ENET
 
 endif #HNS3
 
+endif # ARM || ARM64 || COMPILE_TEST
+
+config HIBMCGE
+	tristate "Hisilicon BMC Gigabit Ethernet Device Support"
+	default m
+	depends on PCI && PCI_MSI
+	help
+	  If you wish to compile a kernel for a BMC with HIBMC-xx_gmac
+	  then you should answer Y to this. This makes this driver suitable for use
+	  on certain boards such as the HIBMC-210.
+
+	  If you are unsure, say N.
+
 endif # NET_VENDOR_HISILICON
diff --git a/drivers/net/ethernet/hisilicon/Makefile b/drivers/net/ethernet/hisilicon/Makefile
index 7f76d412047a..0e2cadfea8ff 100644
--- a/drivers/net/ethernet/hisilicon/Makefile
+++ b/drivers/net/ethernet/hisilicon/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_HNS_MDIO) += hns_mdio.o
 obj-$(CONFIG_HNS) += hns/
 obj-$(CONFIG_HNS3) += hns3/
 obj-$(CONFIG_HISI_FEMAC) += hisi_femac.o
+obj-$(CONFIG_HIBMCGE) += hibmcge/
diff --git a/drivers/net/ethernet/hisilicon/hibmcge/Makefile b/drivers/net/ethernet/hisilicon/hibmcge/Makefile
new file mode 100644
index 000000000000..ea223b7207af
--- /dev/null
+++ b/drivers/net/ethernet/hisilicon/hibmcge/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Makefile for the HISILICON BMC GE network device drivers.
+#
+
+ccflags-y += -I$(src)
+
+obj-$(CONFIG_HIBMCGE) += hibmcge.o
+
+hibmcge-objs = hbg_main.o hbg_hw.o hbg_mdio.o hbg_irq.o hbg_txrx.o hbg_ethtool.o
-- 
2.33.0


  parent reply	other threads:[~2024-07-31  9:48 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-07-31  9:42 [RFC PATCH net-next 00/10] Add support of HIBMCGE Ethernet Driver Jijie Shao
2024-07-31  9:42 ` [RFC PATCH net-next 01/10] net: hibmcge: Add pci table supported in this module Jijie Shao
2024-07-31  9:42 ` [RFC PATCH net-next 02/10] net: hibmcge: Add read/write registers supported through the bar space Jijie Shao
2024-08-05 12:55   ` Simon Horman
2024-08-05 13:08     ` Jijie Shao
2024-07-31  9:42 ` [RFC PATCH net-next 03/10] net: hibmcge: Add mdio and hardware configuration supported in this module Jijie Shao
2024-08-01  0:42   ` Andrew Lunn
2024-08-01  9:04     ` Jijie Shao
2024-08-01 12:07       ` Andrew Lunn
2024-07-31  9:42 ` [RFC PATCH net-next 04/10] net: hibmcge: Add interrupt " Jijie Shao
2024-07-31 13:14   ` Joe Damato
2024-08-01 11:31     ` Jijie Shao
2024-08-05 12:57   ` Simon Horman
2024-08-05 13:29     ` Jijie Shao
2024-07-31  9:42 ` [RFC PATCH net-next 05/10] net: hibmcge: Implement some .ndo functions Jijie Shao
2024-08-01  0:51   ` Andrew Lunn
2024-08-01  9:13     ` Jijie Shao
2024-08-01 12:18       ` Andrew Lunn
2024-08-01 12:33         ` Jijie Shao
2024-08-01 12:36           ` Andrew Lunn
2024-08-01 13:08             ` Jijie Shao
2024-07-31  9:42 ` [RFC PATCH net-next 06/10] net: hibmcge: Implement .ndo_start_xmit function Jijie Shao
2024-07-31  9:42 ` [RFC PATCH net-next 07/10] net: hibmcge: Implement rx_poll function to receive packets Jijie Shao
2024-07-31 13:23   ` Joe Damato
2024-08-01 11:58     ` Jijie Shao
2024-07-31  9:42 ` [RFC PATCH net-next 08/10] net: hibmcge: Implement workqueue and some ethtool_ops functions Jijie Shao
2024-08-01  1:10   ` Andrew Lunn
2024-08-01 11:10     ` Jijie Shao
2024-08-01 12:26       ` Andrew Lunn
2024-08-01 13:06         ` Jijie Shao
2024-08-01 20:16           ` Andrew Lunn
2024-07-31  9:42 ` Jijie Shao [this message]
2024-08-01  1:13   ` [RFC PATCH net-next 09/10] net: hibmcge: Add a Makefile and update Kconfig for hibmcge Andrew Lunn
2024-08-01 12:15     ` Jijie Shao
2024-08-01 12:33       ` Andrew Lunn
2024-07-31  9:42 ` [RFC PATCH net-next 10/10] net: hibmcge: Add maintainer " Jijie Shao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240731094245.1967834-10-shaojijie@huawei.com \
    --to=shaojijie@huawei.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=horms@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=liuyonglong@huawei.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=salil.mehta@huawei.com \
    --cc=shenjian15@huawei.com \
    --cc=shiyongbang@huawei.com \
    --cc=sudongming1@huawei.com \
    --cc=wangpeiyang1@huawei.com \
    --cc=xujunsheng@huawei.com \
    --cc=yisen.zhuang@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox