Re: [PATCH net-next v2 0/2] Add Marvell PHY PTP support

[Vladimir Oltean <vladimir.oltean@nxp.com>]

On Wed, Apr 09, 2025 at 09:35:59AM +0100, Russell King (Oracle) wrote:
> On Wed, Apr 09, 2025 at 10:31:30AM +0200, Kory Maincent wrote:
> > On Tue, 8 Apr 2025 21:38:19 +0100
> > "Russell King (Oracle)" <linux@armlinux.org.uk> wrote:
> > 
> > > On Mon, Apr 07, 2025 at 06:39:14PM +0200, Kory Maincent wrote:
> > > > On Mon, 7 Apr 2025 17:32:43 +0100
> > > > "Russell King (Oracle)" <linux@armlinux.org.uk> wrote:
> > > > > I'm preferring to my emails in connection with:
> > > > > 
> > > > > https://lore.kernel.org/r/ZzTMhGDoi3WcY6MR@shell.armlinux.org.uk
> > > > > 
> > > > > when I tested your work last time, it seemed that what was merged hadn't
> > > > > even been tested. In the last email, you said you'd look into it, but I
> > > > > didn't hear anything further. Have the problems I reported been
> > > > > addressed?  
> > > > 
> > > > It wasn't merged it was 19th version and it worked and was tested, but not
> > > > with the best development design. I have replied to you that I will do some
> > > > change in v20 to address this.
> > > > https://lore.kernel.org/all/20241113171443.697ac278@kmaincent-XPS-13-7390/
> > > > 
> > > > It gets finally merged in v21.  
> > > 
> > > Okay, so I'm pleased to report that this now works on the Macchiatobin:
> > > 
> > > where phc 2 is the mvpp2 clock, and phc 0 is the PHY.
> > 
> > Great, thank you for the testing!
> > 
> > > 
> > > # ethtool -T eth2
> > > Time stamping parameters for eth2:
> > > Capabilities:
> > >         hardware-transmit
> > >         software-transmit
> > >         hardware-receive
> > >         software-receive
> > >         software-system-clock
> > >         hardware-raw-clock
> > > PTP Hardware Clock: 2
> > > Hardware Transmit Timestamp Modes:
> > >         off
> > >         on
> > >         onestep-sync
> > >         onestep-p2p
> > > Hardware Receive Filter Modes:
> > >         none
> > >         all
> > > 
> > > So I guess that means that by default it's using PHC 2, and thus using
> > > the MVPP2 PTP implementation - which is good, it means that when we add
> > > Marvell PHY support, this won't switch to the PHY implementation.
> > 
> > Yes.
> > 
> > > 
> > > Now, testing ethtool:
> > > 
> > > $ ./ethtool --get-hwtimestamp-cfg eth2
> > > netlink error: Operation not supported
> > > 
> > > Using ynl:
> > > 
> > > # ./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --dump
> > > tsconfig-get --json '{"header":{"dev-name":"eth2"}}' []
> > > 
> > > So, It's better, something still isn't correct as there's no
> > > configuration. Maybe mvpp2 needs updating first? If that's the case,
> > > then we're not yet in a position to merge PHY PTP support.
> > 
> > Indeed mvpp2 has not been update to support the ndo_hwtstamp_get/set NDOs.
> > Vlad had made some work to update all net drivers to these NDOs but he never
> > send it mainline:
> > https://github.com/vladimiroltean/linux/commits/ndo-hwtstamp-v9
> > 
> > I have already try to ping him on this but without success.
> > Vlad any idea on when you could send your series upstream?
> 
> Right, and that means that the kernel is not yet ready to support
> Marvell PHY PTP, because all the pre-requisits to avoid breaking
> mvpp2 have not yet been merged.
> 
> So that's a NAK on this series from me.
> 
> I'd have thought this would be obvious given my well known stance
> on why I haven't merged Marvell PHY PTP support before.
> 
> -- 
> RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
> FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!

I will try to update and submit that patch set over the course of this
weekend.