Re: [PATCH net-next v2 0/2] Add Marvell PHY PTP support

[Kory Maincent <kory.maincent@bootlin.com>]

On Tue, 8 Apr 2025 21:38:19 +0100
"Russell King (Oracle)" <linux@armlinux.org.uk> wrote:

> On Mon, Apr 07, 2025 at 06:39:14PM +0200, Kory Maincent wrote:
> > On Mon, 7 Apr 2025 17:32:43 +0100
> > "Russell King (Oracle)" <linux@armlinux.org.uk> wrote:
> > > I'm preferring to my emails in connection with:
> > > 
> > > https://lore.kernel.org/r/ZzTMhGDoi3WcY6MR@shell.armlinux.org.uk
> > > 
> > > when I tested your work last time, it seemed that what was merged hadn't
> > > even been tested. In the last email, you said you'd look into it, but I
> > > didn't hear anything further. Have the problems I reported been
> > > addressed?  
> > 
> > It wasn't merged it was 19th version and it worked and was tested, but not
> > with the best development design. I have replied to you that I will do some
> > change in v20 to address this.
> > https://lore.kernel.org/all/20241113171443.697ac278@kmaincent-XPS-13-7390/
> > 
> > It gets finally merged in v21.  
> 
> Okay, so I'm pleased to report that this now works on the Macchiatobin:
> 
> where phc 2 is the mvpp2 clock, and phc 0 is the PHY.

Great, thank you for the testing!

> 
> # ethtool -T eth2
> Time stamping parameters for eth2:
> Capabilities:
>         hardware-transmit
>         software-transmit
>         hardware-receive
>         software-receive
>         software-system-clock
>         hardware-raw-clock
> PTP Hardware Clock: 2
> Hardware Transmit Timestamp Modes:
>         off
>         on
>         onestep-sync
>         onestep-p2p
> Hardware Receive Filter Modes:
>         none
>         all
> 
> So I guess that means that by default it's using PHC 2, and thus using
> the MVPP2 PTP implementation - which is good, it means that when we add
> Marvell PHY support, this won't switch to the PHY implementation.

Yes.

> 
> Now, testing ethtool:
> 
> $ ./ethtool --get-hwtimestamp-cfg eth2
> netlink error: Operation not supported
> 
> Using ynl:
> 
> # ./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --dump
> tsconfig-get --json '{"header":{"dev-name":"eth2"}}' []
> 
> So, It's better, something still isn't correct as there's no
> configuration. Maybe mvpp2 needs updating first? If that's the case,
> then we're not yet in a position to merge PHY PTP support.

Indeed mvpp2 has not been update to support the ndo_hwtstamp_get/set NDOs.
Vlad had made some work to update all net drivers to these NDOs but he never
send it mainline:
https://github.com/vladimiroltean/linux/commits/ndo-hwtstamp-v9

I have already try to ping him on this but without success.
Vlad any idea on when you could send your series upstream?

Regards,
-- 
Köry Maincent, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com