From: Vladimir Oltean <vladimir.oltean@nxp.com>
To: netdev@vger.kernel.org
Cc: Andrew Lunn <andrew@lunn.ch>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Marek Vasut <marex@denx.de>, Wei Fang <wei.fang@nxp.com>,
Clark Wang <xiaoning.wang@nxp.com>
Subject: [PATCH v2 net-next 6/6] net: phy: realtek: create rtl8211f_config_phy_eee() helper
Date: Fri, 7 Nov 2025 13:08:17 +0200 [thread overview]
Message-ID: <20251107110817.324389-7-vladimir.oltean@nxp.com> (raw)
In-Reply-To: <20251107110817.324389-1-vladimir.oltean@nxp.com>
To simplify the rtl8211f_config_init() control flow and get rid of
"early" returns for PHYs where the PHYCR2 register is absent, move the
entire logic sub-block that deals with disabling PHY-mode EEE to a
separate function. There, it is much more obvious what the early
"return 0" skips, and it becomes more difficult to accidentally skip
unintended stuff.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
v1->v2: patch is new
drivers/net/phy/realtek/realtek_main.c | 29 ++++++++++++++++----------
1 file changed, 18 insertions(+), 11 deletions(-)
diff --git a/drivers/net/phy/realtek/realtek_main.c b/drivers/net/phy/realtek/realtek_main.c
index 4501b8923aad..6e75e124f27a 100644
--- a/drivers/net/phy/realtek/realtek_main.c
+++ b/drivers/net/phy/realtek/realtek_main.c
@@ -684,6 +684,23 @@ static int rtl8211f_config_aldps(struct phy_device *phydev)
mask, mask);
}
+static int rtl8211f_config_phy_eee(struct phy_device *phydev)
+{
+ int ret;
+
+ /* RTL8211FVD has no PHYCR2 register */
+ if (phydev->drv->phy_id == RTL_8211FVD_PHYID)
+ return 0;
+
+ /* Disable PHY-mode EEE so LPI is passed to the MAC */
+ ret = phy_modify_paged(phydev, RTL8211F_PHYCR_PAGE, RTL8211F_PHYCR2,
+ RTL8211F_PHYCR2_PHY_EEE_ENABLE, 0);
+ if (ret)
+ return ret;
+
+ return genphy_soft_reset(phydev);
+}
+
static int rtl8211f_config_init(struct phy_device *phydev)
{
struct device *dev = &phydev->mdio.dev;
@@ -707,17 +724,7 @@ static int rtl8211f_config_init(struct phy_device *phydev)
return ret;
}
- /* RTL8211FVD has no PHYCR2 register */
- if (phydev->drv->phy_id == RTL_8211FVD_PHYID)
- return 0;
-
- /* Disable PHY-mode EEE so LPI is passed to the MAC */
- ret = phy_modify_paged(phydev, RTL8211F_PHYCR_PAGE, RTL8211F_PHYCR2,
- RTL8211F_PHYCR2_PHY_EEE_ENABLE, 0);
- if (ret)
- return ret;
-
- return genphy_soft_reset(phydev);
+ return rtl8211f_config_phy_eee(phydev);
}
static int rtl821x_suspend(struct phy_device *phydev)
--
2.34.1
next prev parent reply other threads:[~2025-11-07 11:08 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-07 11:08 [PATCH v2 net-next 0/6] Disable CLKOUT on RTL8211F(D)(I)-VD-CG Vladimir Oltean
2025-11-07 11:08 ` [PATCH v2 net-next 1/6] net: phy: realtek: create rtl8211f_config_rgmii_delay() Vladimir Oltean
2025-11-07 13:27 ` Andrew Lunn
2025-11-07 11:08 ` [PATCH v2 net-next 2/6] net: phy: realtek: eliminate priv->phycr2 variable Vladimir Oltean
2025-11-07 13:27 ` Andrew Lunn
2025-11-07 11:08 ` [PATCH v2 net-next 3/6] net: phy: realtek: eliminate has_phycr2 variable Vladimir Oltean
2025-11-07 11:08 ` [PATCH v2 net-next 4/6] net: phy: realtek: allow CLKOUT to be disabled on RTL8211F(D)(I)-VD-CG Vladimir Oltean
2025-11-07 13:29 ` Andrew Lunn
2025-11-07 11:08 ` [PATCH v2 net-next 5/6] net: phy: realtek: eliminate priv->phycr1 variable Vladimir Oltean
2025-11-07 13:30 ` Andrew Lunn
2025-11-07 11:08 ` Vladimir Oltean [this message]
2025-11-07 13:34 ` [PATCH v2 net-next 6/6] net: phy: realtek: create rtl8211f_config_phy_eee() helper Andrew Lunn
2025-11-07 14:32 ` Vladimir Oltean
2025-11-07 16:18 ` Andrew Lunn
2025-11-13 12:13 ` Vladimir Oltean
2025-11-13 14:03 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251107110817.324389-7-vladimir.oltean@nxp.com \
--to=vladimir.oltean@nxp.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux@armlinux.org.uk \
--cc=marex@denx.de \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=wei.fang@nxp.com \
--cc=xiaoning.wang@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox