From: Tony Nguyen <anthony.l.nguyen@intel.com>
To: davem@davemloft.net, kuba@kernel.org, pabeni@redhat.com,
edumazet@google.com, andrew+netdev@lunn.ch,
netdev@vger.kernel.org
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Subject: [PATCH net 00/10][pull request] Intel Wired LAN Driver Updates 2026-05-15 (ice, ixgbevf, igc, e1000e)
Date: Fri, 15 May 2026 11:24:07 -0700 [thread overview]
Message-ID: <20260515182419.1597859-1-anthony.l.nguyen@intel.com> (raw)
For ice:
Jake fixes a mismatch in locking around wait queue usage.
Jose Ignacio Tornos Martinez adjusts allowed lower bound for VF data
buffer size to accommodate low MTU sizes.
Marcin adjusts for -EEXIST to not trigger error path when the promisc
filter already exists as part of adding VLAN Ids.
Grzegorz fixes a few issues related to PTP. He adds locking to
ice_start_phy_timer_eth56g() to protect proper register programming.
Fixes the PTP lock used in 2xNAC configuration to always be the primary
and restores PTP configuration on ethtool channel changes.
For ixgbevf:
Michael Bommarito sets freed skb pointer to NULL to prevent
use-after-free.
For igc:
Kohei Enju resolves a couple of issues reported by Sashiko; setting
buffer type for an SMD skb and freeing skb on error of
igc_fpe_init_tx_descriptor().
For e1000e:
Vitaly adds detection, and correction, of XTAL clock on Tiger Lake
and Alder Lake systems.
---
Note: The e1000e patch was originally here:
https://lore.kernel.org/netdev/20260220004027.729384-14-anthony.l.nguyen@intel.com/
Changes since:
- fix cc.shift
- wrap TIMINCA write in systim_lock
- replace ktime_to_ns(ktime_get_real()) with ktime_get_real_ns()
The following are changes since commit 5db89c99566fc4728cc92e941d8e1975711e24b5:
net: ifb: report ethtool stats over num_tx_queues
and are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue 100GbE
Grzegorz Nitka (3):
ice: ptp: serialize E825 PHY timer start with PTP lock
ice: ptp: use primary NAC semaphore on E825
ice: restore PTP Rx timestamp config after ethtool set-channels
Jacob Keller (1):
ice: fix locking around wait_event_interruptible_locked_irq
Jose Ignacio Tornos Martinez (1):
ice: fix VF queue configuration with low MTU values
Kohei Enju (2):
igc: set tx buffer type for SMD frames
igc: fix potential skb leak in igc_fpe_xmit_smd_frame()
Marcin Szycik (1):
ice: fix setting promisc mode while adding VID filter
Michael Bommarito (1):
ixgbevf: fix use-after-free in VEPA multicast source pruning
Vitaly Lifshits (1):
e1000e: correct TIMINCA on ADP/TGP systems with wrong XTAL frequency
drivers/net/ethernet/intel/e1000e/netdev.c | 78 +++++++++++++++++++
drivers/net/ethernet/intel/ice/ice_main.c | 8 +-
drivers/net/ethernet/intel/ice/ice_ptp_hw.c | 33 ++++++--
drivers/net/ethernet/intel/ice/virt/queues.c | 2 +-
drivers/net/ethernet/intel/igc/igc_tsn.c | 9 ++-
.../net/ethernet/intel/ixgbevf/ixgbevf_main.c | 1 +
6 files changed, 121 insertions(+), 10 deletions(-)
--
2.47.1
next reply other threads:[~2026-05-15 18:24 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-15 18:24 Tony Nguyen [this message]
2026-05-15 18:24 ` [PATCH net 01/10] ice: fix locking around wait_event_interruptible_locked_irq Tony Nguyen
2026-05-15 18:24 ` [PATCH net 02/10] ice: fix VF queue configuration with low MTU values Tony Nguyen
2026-05-15 18:24 ` [PATCH net 03/10] ice: fix setting promisc mode while adding VID filter Tony Nguyen
2026-05-15 18:24 ` [PATCH net 04/10] ice: ptp: serialize E825 PHY timer start with PTP lock Tony Nguyen
2026-05-15 18:24 ` [PATCH net 05/10] ice: ptp: use primary NAC semaphore on E825 Tony Nguyen
2026-05-15 18:24 ` [PATCH net 06/10] ice: restore PTP Rx timestamp config after ethtool set-channels Tony Nguyen
2026-05-15 18:24 ` [PATCH net 07/10] ixgbevf: fix use-after-free in VEPA multicast source pruning Tony Nguyen
2026-05-15 18:24 ` [PATCH net 08/10] igc: set tx buffer type for SMD frames Tony Nguyen
2026-05-15 18:24 ` [PATCH net 09/10] igc: fix potential skb leak in igc_fpe_xmit_smd_frame() Tony Nguyen
2026-05-15 18:24 ` [PATCH net 10/10] e1000e: correct TIMINCA on ADP/TGP systems with wrong XTAL frequency Tony Nguyen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260515182419.1597859-1-anthony.l.nguyen@intel.com \
--to=anthony.l.nguyen@intel.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox