From: Tony Nguyen <anthony.l.nguyen@intel.com>
To: davem@davemloft.net, kuba@kernel.org, pabeni@redhat.com,
edumazet@google.com, andrew+netdev@lunn.ch,
netdev@vger.kernel.org
Cc: Michael Bommarito <michael.bommarito@gmail.com>,
anthony.l.nguyen@intel.com, przemyslaw.kitszel@intel.com,
stable@vger.kernel.org, Simon Horman <horms@kernel.org>,
Rafal Romanowski <rafal.romanowski@intel.com>
Subject: [PATCH net 07/10] ixgbevf: fix use-after-free in VEPA multicast source pruning
Date: Fri, 15 May 2026 11:24:14 -0700 [thread overview]
Message-ID: <20260515182419.1597859-8-anthony.l.nguyen@intel.com> (raw)
In-Reply-To: <20260515182419.1597859-1-anthony.l.nguyen@intel.com>
From: Michael Bommarito <michael.bommarito@gmail.com>
ixgbevf_clean_rx_irq() prunes frames whose source MAC matches the VF's
own address (VEPA multicast workaround) by freeing the skb and
continuing to the next descriptor:
dev_kfree_skb_irq(skb);
continue;
The skb pointer is declared outside the while loop and persists across
iterations. Because the continue skips the "skb = NULL" reset at the
bottom of the loop, the next iteration enters the "else if (skb)" path
and calls ixgbevf_add_rx_frag() on the freed skb, dereferencing
skb_shinfo(skb)->nr_frags - a use-after-free in NAPI softirq context.
The sibling driver iavf already handles this correctly by nulling the
pointer before continuing. Apply the same pattern here.
I do not have ixgbevf hardware; the bug was found by static analysis
(scan_drop_continue_loops.py + semgrep drop_continue_in_loop, multi-tool
corroboration with the highest score in the scan). The UAF was confirmed
under KASAN by loading a test module that reproduces the exact code
pattern (alloc skb, kfree_skb, then read skb_shinfo(skb)->nr_frags):
BUG: KASAN: slab-use-after-free in ixgbevf_uaf_test_init+0x100/0x1000
Read of size 8 at addr 000000006163ae78 by task insmod/30
freed 208-byte region [000000006163adc0, 000000006163ae90)
QEMU emulates igb (82576) but not ixgbe (82599), and the igbvf VF
driver does not include the VEPA source pruning path, so a full
end-to-end reproduction with emulated hardware was not possible.
Fixes: bad17234ba70 ("ixgbevf: Change receive model to use double buffered page based receives")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-6
Assisted-by: Codex:gpt-5-4
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index 42f89a179a3f..4ba3be961ab6 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -1221,6 +1221,7 @@ static int ixgbevf_clean_rx_irq(struct ixgbevf_q_vector *q_vector,
ether_addr_equal(rx_ring->netdev->dev_addr,
eth_hdr(skb)->h_source)) {
dev_kfree_skb_irq(skb);
+ skb = NULL;
continue;
}
--
2.47.1
next prev parent reply other threads:[~2026-05-15 18:24 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-15 18:24 [PATCH net 00/10][pull request] Intel Wired LAN Driver Updates 2026-05-15 (ice, ixgbevf, igc, e1000e) Tony Nguyen
2026-05-15 18:24 ` [PATCH net 01/10] ice: fix locking around wait_event_interruptible_locked_irq Tony Nguyen
2026-05-15 18:24 ` [PATCH net 02/10] ice: fix VF queue configuration with low MTU values Tony Nguyen
2026-05-15 18:24 ` [PATCH net 03/10] ice: fix setting promisc mode while adding VID filter Tony Nguyen
2026-05-15 18:24 ` [PATCH net 04/10] ice: ptp: serialize E825 PHY timer start with PTP lock Tony Nguyen
2026-05-15 18:24 ` [PATCH net 05/10] ice: ptp: use primary NAC semaphore on E825 Tony Nguyen
2026-05-15 18:24 ` [PATCH net 06/10] ice: restore PTP Rx timestamp config after ethtool set-channels Tony Nguyen
2026-05-15 18:24 ` Tony Nguyen [this message]
2026-05-15 18:24 ` [PATCH net 08/10] igc: set tx buffer type for SMD frames Tony Nguyen
2026-05-15 18:24 ` [PATCH net 09/10] igc: fix potential skb leak in igc_fpe_xmit_smd_frame() Tony Nguyen
2026-05-15 18:24 ` [PATCH net 10/10] e1000e: correct TIMINCA on ADP/TGP systems with wrong XTAL frequency Tony Nguyen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260515182419.1597859-8-anthony.l.nguyen@intel.com \
--to=anthony.l.nguyen@intel.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=kuba@kernel.org \
--cc=michael.bommarito@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=przemyslaw.kitszel@intel.com \
--cc=rafal.romanowski@intel.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox