[PATCH net 08/10] igc: set tx buffer type for SMD frames

[Tony Nguyen <anthony.l.nguyen@intel.com>]

From: Kohei Enju <kohei@enjuk.jp>

Sashiko pointed out that igc_fpe_init_smd_frame() initializes
igc_tx_buffer fields for an SMD skb, but does not set the buffer type:
https://sashiko.dev/#/patchset/20260415025226.114115-1-kohei%40enjuk.jp

Since igc_tx_buffer entries are reused, a stale XDP or XSK type can
remain and make TX completion use the wrong cleanup path.

Set the buffer type to IGC_TX_BUFFER_TYPE_SKB.

Fixes: 5422570c0010 ("igc: add support for frame preemption verification")
Signed-off-by: Kohei Enju <kohei@enjuk.jp>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/igc/igc_tsn.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/intel/igc/igc_tsn.c b/drivers/net/ethernet/intel/igc/igc_tsn.c
index 8a110145bfee..725ba253165c 100644
--- a/drivers/net/ethernet/intel/igc/igc_tsn.c
+++ b/drivers/net/ethernet/intel/igc/igc_tsn.c
@@ -34,6 +34,7 @@ static int igc_fpe_init_smd_frame(struct igc_ring *ring,
 		return -ENOMEM;
 	}
 
+	buffer->type = IGC_TX_BUFFER_TYPE_SKB;
 	buffer->skb = skb;
 	buffer->protocol = 0;
 	buffer->bytecount = skb->len;
-- 
2.47.1