[PATCH net-next v2 03/10] net: dsa: microchip: use dynamic mask to check pulse width validity

["Bastien Curutchet (Schneider Electric)" <bastien.curutchet@bootlin.com>]

The pulse width validity is checked against an hardcoded mask. KSZ8463
uses a smaller register than other switches so this check won't work for
it.

Move the mask as a ksz_ptp_tou_pulse_verify()'s input to allow changing
it for KSZ8463 case.

Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
---
 drivers/net/dsa/microchip/ksz_ptp.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz_ptp.c b/drivers/net/dsa/microchip/ksz_ptp.c
index f80015250e5a..7bf83e0b5918 100644
--- a/drivers/net/dsa/microchip/ksz_ptp.c
+++ b/drivers/net/dsa/microchip/ksz_ptp.c
@@ -86,7 +86,7 @@ static int ksz_ptp_tou_reset(struct ksz_device *dev, u8 unit)
 			 0);
 }
 
-static int ksz_ptp_tou_pulse_verify(u64 pulse_ns)
+static int ksz_ptp_tou_pulse_verify(u64 pulse_ns, u32 mask)
 {
 	u32 data;
 
@@ -94,7 +94,7 @@ static int ksz_ptp_tou_pulse_verify(u64 pulse_ns)
 		return -EINVAL;
 
 	data = (pulse_ns / 8);
-	if (!FIELD_FIT(TRIG_PULSE_WIDTH_M, data))
+	if ((mask & data) != data)
 		return -ERANGE;
 
 	return 0;
@@ -245,7 +245,7 @@ static int ksz_ptp_enable_perout(struct ksz_device *dev,
 				       KSZ_MAX_PULSE_WIDTH);
 	}
 
-	ret = ksz_ptp_tou_pulse_verify(pulse_width_ns);
+	ret = ksz_ptp_tou_pulse_verify(pulse_width_ns, TRIG_PULSE_WIDTH_M);
 	if (ret)
 		return ret;
 

-- 
2.55.0