From: "Bastien Curutchet (Schneider Electric)" <bastien.curutchet@bootlin.com>
To: Woojung Huh <woojung.huh@microchip.com>,
UNGLinuxDriver@microchip.com, Andrew Lunn <andrew@lunn.ch>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
Paolo Abeni <pabeni@redhat.com>,
Richard Cochran <richardcochran@gmail.com>
Cc: "Pascal Eberhard" <pascal.eberhard@se.com>,
"Miquèl Raynal" <miquel.raynal@bootlin.com>,
"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
"Bastien Curutchet (Schneider Electric)"
<bastien.curutchet@bootlin.com>
Subject: [PATCH net-next v2 09/10] net: dsa: microchip: extract time adjustment
Date: Wed, 02 Sep 2026 11:57:39 +0200 [thread overview]
Message-ID: <20260902-ksz-perout-v2-9-6f277fcc9e68@bootlin.com> (raw)
In-Reply-To: <20260902-ksz-perout-v2-0-6f277fcc9e68@bootlin.com>
The KSZ8463 supports periodic outputs but doesn't handle them in the same
way as the other KSZ switches. To add proper support for the KSZ8463, a
dedicated ksz8463_ptp_adjtime() function needs to be created. This
function will access the same registers as the common ksz_ptp_adjtime()
function.
Extract the register accesses into a dedicated function so it can be
used later by the KSZ8463 support.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
---
drivers/net/dsa/microchip/ksz_ptp.c | 29 ++++++++++++++++++++---------
1 file changed, 20 insertions(+), 9 deletions(-)
diff --git a/drivers/net/dsa/microchip/ksz_ptp.c b/drivers/net/dsa/microchip/ksz_ptp.c
index aa73ad1f05d8..0a77b46cfad2 100644
--- a/drivers/net/dsa/microchip/ksz_ptp.c
+++ b/drivers/net/dsa/microchip/ksz_ptp.c
@@ -946,18 +946,13 @@ static int ksz_ptp_adjfine(struct ptp_clock_info *ptp, long scaled_ppm)
return ret;
}
-static int ksz_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta)
+static int __ksz_ptp_adjtime(struct ksz_device *dev, s64 delta)
{
- struct ksz_ptp_data *ptp_data = ptp_caps_to_data(ptp);
- struct ksz_device *dev = ptp_data_to_ksz_dev(ptp_data);
- struct timespec64 delta64 = ns_to_timespec64(delta);
const u16 *regs = dev->info->regs;
s32 sec, nsec;
u16 data16;
int ret;
- mutex_lock(&ptp_data->lock);
-
/* do not use ns_to_timespec64(),
* both sec and nsec are subtracted by hw
*/
@@ -965,15 +960,15 @@ static int ksz_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta)
ret = ksz_write32(dev, regs[PTP_RTC_NANOSEC], abs(nsec));
if (ret)
- goto unlock;
+ return ret;
ret = ksz_write32(dev, regs[PTP_RTC_SEC], abs(sec));
if (ret)
- goto unlock;
+ return ret;
ret = ksz_read16(dev, regs[PTP_CLK_CTRL], &data16);
if (ret)
- goto unlock;
+ return ret;
data16 |= PTP_STEP_ADJ;
@@ -984,6 +979,22 @@ static int ksz_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta)
data16 |= PTP_STEP_DIR;
ret = ksz_write16(dev, regs[PTP_CLK_CTRL], data16);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int ksz_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta)
+{
+ struct ksz_ptp_data *ptp_data = ptp_caps_to_data(ptp);
+ struct ksz_device *dev = ptp_data_to_ksz_dev(ptp_data);
+ struct timespec64 delta64 = ns_to_timespec64(delta);
+ int ret;
+
+ mutex_lock(&ptp_data->lock);
+
+ ret = __ksz_ptp_adjtime(dev, delta);
if (ret)
goto unlock;
--
2.55.0
next prev parent reply other threads:[~2026-09-02 9:57 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-02 9:57 [PATCH net-next v2 00/10] net: dsa: microchip: add periodic output support for the KSZ8463 Bastien Curutchet (Schneider Electric)
2026-09-02 9:57 ` [PATCH net-next v2 01/10] net: dsa: microchip: add the number of pins to chip infos Bastien Curutchet (Schneider Electric)
2026-09-02 9:57 ` [PATCH net-next v2 02/10] net: dsa: microchip: add the number of periodic signals " Bastien Curutchet (Schneider Electric)
2026-09-02 9:57 ` [PATCH net-next v2 03/10] net: dsa: microchip: use dynamic mask to check pulse width validity Bastien Curutchet (Schneider Electric)
2026-09-02 9:57 ` [PATCH net-next v2 04/10] net: dsa: microchip: extract PTP callbacks configuration from PTP registration Bastien Curutchet (Schneider Electric)
2026-09-02 9:57 ` [PATCH net-next v2 05/10] net: dsa: microchip: extract ptp_get_pin Bastien Curutchet (Schneider Electric)
2026-09-02 9:57 ` [PATCH net-next v2 06/10] net: dsa: microchip: extract compute_width Bastien Curutchet (Schneider Electric)
2026-09-02 9:57 ` [PATCH net-next v2 07/10] net: dsa: microchip: extract prepare reset Bastien Curutchet (Schneider Electric)
2026-09-02 9:57 ` [PATCH net-next v2 08/10] net: dsa: microchip: extract time update Bastien Curutchet (Schneider Electric)
2026-09-02 9:57 ` Bastien Curutchet (Schneider Electric) [this message]
2026-09-02 9:57 ` [PATCH net-next v2 10/10] net: dsa: microchip: add periodic output support for the KSZ8463 Bastien Curutchet (Schneider Electric)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260902-ksz-perout-v2-9-6f277fcc9e68@bootlin.com \
--to=bastien.curutchet@bootlin.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=miquel.raynal@bootlin.com \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=pascal.eberhard@se.com \
--cc=richardcochran@gmail.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=woojung.huh@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox