[PATCH net-next v2 07/10] net: dsa: microchip: extract prepare reset

["Bastien Curutchet (Schneider Electric)" <bastien.curutchet@bootlin.com>]

The KSZ8463 supports periodic outputs but doesn't handle them in the same
way as the other KSZ switches. To add proper support for the KSZ8463, a
dedicated ksz8463_ptp_restart_perout() function needs to be created. This
function will use the same request initialization as the common
ksz_ptp_restart_perout() function.

Extract the inialization into a dedicated function so it can be used
later by the KSZ8463 support.

Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
---
 drivers/net/dsa/microchip/ksz_ptp.c | 28 ++++++++++++++++++++--------
 1 file changed, 20 insertions(+), 8 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz_ptp.c b/drivers/net/dsa/microchip/ksz_ptp.c
index 2f141df65eb0..e262bc7448f2 100644
--- a/drivers/net/dsa/microchip/ksz_ptp.c
+++ b/drivers/net/dsa/microchip/ksz_ptp.c
@@ -788,11 +788,11 @@ static int ksz_ptp_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts)
 	return ret;
 }
 
-static int ksz_ptp_restart_perout(struct ksz_device *dev)
+static int ksz_ptp_prepare_restart_perout(struct ksz_device *dev,
+					  struct ptp_perout_request *request)
 {
 	struct ksz_ptp_data *ptp_data = &dev->ptp_data;
 	s64 now_ns, first_ns, period_ns, next_ns;
-	struct ptp_perout_request request;
 	struct timespec64 next;
 	struct timespec64 now;
 	unsigned int count;
@@ -823,12 +823,24 @@ static int ksz_ptp_restart_perout(struct ksz_device *dev)
 
 	/* Restart periodic output signal */
 	next = ns_to_timespec64(next_ns);
-	request.start.sec  = next.tv_sec;
-	request.start.nsec = next.tv_nsec;
-	request.period.sec  = ptp_data->perout_period.tv_sec;
-	request.period.nsec = ptp_data->perout_period.tv_nsec;
-	request.index = 0;
-	request.flags = 0;
+	request->start.sec  = next.tv_sec;
+	request->start.nsec = next.tv_nsec;
+	request->period.sec  = ptp_data->perout_period.tv_sec;
+	request->period.nsec = ptp_data->perout_period.tv_nsec;
+	request->index = 0;
+	request->flags = 0;
+
+	return 0;
+}
+
+static int ksz_ptp_restart_perout(struct ksz_device *dev)
+{
+	struct ptp_perout_request request;
+	int ret;
+
+	ret = ksz_ptp_prepare_restart_perout(dev, &request);
+	if (ret)
+		return ret;
 
 	return ksz_ptp_enable_perout(dev, &request, 1);
 }

-- 
2.55.0