Netdev List
 help / color / mirror / Atom feed
From: Tariq Toukan <tariqt@nvidia.com>
To: Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@kernel.org>,
	Jakub Kicinski <kuba@kernel.org>, <netdev@vger.kernel.org>,
	Paolo Abeni <pabeni@redhat.com>
Cc: Dragos Tatulea <dtatulea@nvidia.com>,
	Gal Pressman <gal@nvidia.com>, "Joe Damato" <joe@dama.to>,
	Leon Romanovsky <leon@kernel.org>,
	open list <linux-kernel@vger.kernel.org>,
	<linux-rdma@vger.kernel.org>, Mark Bloch <mbloch@nvidia.com>,
	"Nabil S. Alramli" <dev@nalramli.com>,
	Rahul Rameshbabu <rrameshbabu@nvidia.com>,
	Saeed Mahameed <saeedm@nvidia.com>,
	Tariq Toukan <tariqt@nvidia.com>,
	Yael Chemla <ychemla@nvidia.com>
Subject: [PATCH net 1/3] net/mlx5e: Sync CQE moderation pflags with coalesce params
Date: Wed, 14 Oct 2026 15:47:02 +0300	[thread overview]
Message-ID: <20261014124704.1017782-2-tariqt@nvidia.com> (raw)
In-Reply-To: <20261014124704.1017782-1-tariqt@nvidia.com>

From: Yael Chemla <ychemla@nvidia.com>

mlx5e_params keeps two representations of CQE moderation: the private
flags (MLX5E_PFLAG_RX_CQE_BASED_MODER, MLX5E_PFLAG_TX_CQE_BASED_MODER)
and the fields rx_moder_use_cqe_mode / tx_moder_use_cqe_mode, which are
used by ethtool get/set coalesce. Both are used by the driver (ethtool
get/set coalesce, channel open, moderation apply). When they disagree,
CQE moderation reported value is wrong.

Such an issue can be seen on channel attach or reopen:
mlx5e_build_nic_params() runs and sets rx_moder_use_cqe_mode and
tx_moder_use_cqe_mode from device capability but did not set the
corresponding pflags. So after attach/reopen, pflags could remain zero
while the fields reflected hardware configuration.

Fix by syncing pflags in build_nic_params from the capability-derived
fields.

Reproducer:

    ethtool --show-priv-flags eth2 | grep rx_cqe_moder
      rx_cqe_moder       : off
    ethtool --coalesce eth2 adaptive-tx off
    ethtool --show-priv-flags eth2 | grep rx_cqe_moder
      rx_cqe_moder       : on

Fixes: 445a25f6e1a2 ("net/mlx5e: Support updating coalescing configuration without resetting channels")
Signed-off-by: Yael Chemla <ychemla@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 4c6060d54fbe..9fcea0395137 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -5407,6 +5407,10 @@ void mlx5e_build_nic_params(struct mlx5e_priv *priv, struct mlx5e_xsk *xsk, u16
 				 MLX5_CAP_GEN(mdev, cq_period_mode_modify);
 	params->rx_moder_use_cqe_mode = !!MLX5_CAP_GEN(mdev, cq_period_start_from_cqe);
 	params->tx_moder_use_cqe_mode = false;
+	MLX5E_SET_PFLAG(params, MLX5E_PFLAG_RX_CQE_BASED_MODER,
+			params->rx_moder_use_cqe_mode);
+	MLX5E_SET_PFLAG(params, MLX5E_PFLAG_TX_CQE_BASED_MODER,
+			params->tx_moder_use_cqe_mode);
 	mlx5e_reset_rx_moderation(&params->rx_cq_moderation, params->rx_moder_use_cqe_mode,
 				  params->rx_dim_enabled);
 	mlx5e_reset_tx_moderation(&params->tx_cq_moderation, params->tx_moder_use_cqe_mode,
-- 
2.44.0


  reply	other threads:[~2026-10-14 12:48 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-14 12:47 [PATCH net 0/3] net/mlx5e: Fix CQE moderation mode reporting and control Tariq Toukan
2026-10-14 12:47 ` Tariq Toukan [this message]
2026-10-14 12:47 ` [PATCH net 2/3] net/mlx5e: Sync CQE moderation params with pflags in set_pflag_cqe_based_moder Tariq Toukan
2026-10-14 12:47 ` [PATCH net 3/3] net/mlx5e: Expose CQE moderation mode on representors Tariq Toukan
2026-10-14 12:55 ` [PATCH net 0/3] net/mlx5e: Fix CQE moderation mode reporting and control netdev-bot+sinfo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261014124704.1017782-2-tariqt@nvidia.com \
    --to=tariqt@nvidia.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=dev@nalramli.com \
    --cc=dtatulea@nvidia.com \
    --cc=edumazet@kernel.org \
    --cc=gal@nvidia.com \
    --cc=joe@dama.to \
    --cc=kuba@kernel.org \
    --cc=leon@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rdma@vger.kernel.org \
    --cc=mbloch@nvidia.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=rrameshbabu@nvidia.com \
    --cc=saeedm@nvidia.com \
    --cc=ychemla@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox