Netdev List
 help / color / mirror / Atom feed
* [PATCH net-next 0/3] net: stmmac: dwmac-sun8i: enable Flow Control
@ 2026-11-22 14:49 Maxime Chevallier
  2026-11-22 14:49 ` [PATCH net-next 1/3] net: stmmac: dwmac-sun8i: allow controlling TX and RX flow control separately Maxime Chevallier
                   ` (2 more replies)
  0 siblings, 3 replies; 4+ messages in thread
From: Maxime Chevallier @ 2026-11-22 14:49 UTC (permalink / raw)
  To: Andrew Lunn, Jakub Kicinski, davem, Eric Dumazet, Paolo Abeni,
	Simon Horman, Willem de Bruijn, Chen-Yu Tsai, Jernej Skrabec,
	Samuel Holland, Maxime Coquelin, Alexandre Torgue, Russell King,
	Lorenzo Bianconi, Nicolai Buchwitz
  Cc: Maxime Chevallier, thomas.petazzoni, Alexis Lothoré, netdev,
	linux-kernel, linux-arm-kernel, linux-sunxi

While running the "ethtool -t" selftests on H2+ (orangepi zero), the
Flow Control selftests consistently fails.

I originally blamed that on the fact that the board was connected to a
peer that didn't support Pause and that we didn't negotiate Pause at all.

The ethtool selftest are sensitive to what the Peer advertises even
though this is a full loopback test, but it is what it is :(

Since then, the orangepi zero I'm testing dwmac-sun8i on has been wired to
a proper peer, and the selftest still fails. This selftest sends tons of
frames in loopback and checks that Pause frames are generated, and
failing it means no pause frames were sent by the MAC.

Turns out, multiple things were missing in the dwmac-sun8i
implementation to get Flow Control to work.

Patch 1 allows independently setting RX/TX FC

Patch 2 is the one making FC actually work, by configuring the fifo
thresholds

Patch 3 sets the quanta values in the frames.

This seems to have never worked, so since it's not fixing a regression
I'm targetting net-next here.

This was tested only on H2+.

Thanks,

Maxime

Maxime Chevallier (3):
  net: stmmac: dwmac-sun8i: allow controlling TX and RX flow control
    separately
  net: stmmac: dwmac-sun8i: emit pause frames when the RX FIFO fills
  net: stmmac: dwmac-sun8i: configure the pause time for TX flow control

 .../net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 30 +++++++++++++++----
 1 file changed, 25 insertions(+), 5 deletions(-)

-- 
2.56.1


^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2026-11-22 14:49 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-22 14:49 [PATCH net-next 0/3] net: stmmac: dwmac-sun8i: enable Flow Control Maxime Chevallier
2026-11-22 14:49 ` [PATCH net-next 1/3] net: stmmac: dwmac-sun8i: allow controlling TX and RX flow control separately Maxime Chevallier
2026-11-22 14:49 ` [PATCH net-next 2/3] net: stmmac: dwmac-sun8i: emit pause frames when the RX FIFO fills Maxime Chevallier
2026-11-22 14:49 ` [PATCH net-next 3/3] net: stmmac: dwmac-sun8i: configure the pause time for TX flow control Maxime Chevallier

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox