From: Heiner Kallweit <hkallweit1@gmail.com>
To: Realtek linux nic maintainers <nic_swsd@realtek.com>,
David Miller <davem@davemloft.net>
Cc: "netdev@vger.kernel.org" <netdev@vger.kernel.org>
Subject: [PATCH net-next] r8169: disable tx interrupt coalescing on RTL8168
Date: Sun, 31 Mar 2019 15:43:59 +0200 [thread overview]
Message-ID: <23289428-64e1-206c-385e-b1ce9c4cc14c@gmail.com> (raw)
In contrast to switching rx irq coalescing off what fixed an issue,
switching tx irq coalescing off is merely a latency optimization,
therefore net-next. As part of this change:
- Remove INTT_0 .. INTT_3 constants, they aren't used.
- Remove comment in rtl_hw_start_8169(), we now have a detailed
description by the code in rtl_set_coalesce().
- Due to switching irq coalescing off per default we don't need the
initialization in rtl_hw_start_8168(). If ethtool is used to switch
on coalescing then rtl_set_coalesce() will configure this register.
For the sake of completeness: This patch just changes the default.
Users still have the option to configure irq coalescing via ethtool.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
drivers/net/ethernet/realtek/r8169.c | 20 ++------------------
1 file changed, 2 insertions(+), 18 deletions(-)
diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index 8a8a4f70d..8f065bf3e 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -490,10 +490,6 @@ enum rtl_register_content {
PCIDAC = (1 << 4),
PCIMulRW = (1 << 3),
#define INTT_MASK GENMASK(1, 0)
- INTT_0 = 0x0000, // 8168
- INTT_1 = 0x0001, // 8168
- INTT_2 = 0x0002, // 8168
- INTT_3 = 0x0003, // 8168
/* rtl8169_PHYstatus */
TBI_Enable = 0x80,
@@ -4702,6 +4698,8 @@ static void rtl_hw_start(struct rtl8169_private *tp)
rtl_set_rx_tx_desc_registers(tp);
rtl_lock_config_regs(tp);
+ /* disable interrupt coalescing */
+ RTL_W16(tp, IntrMitigate, 0x0000);
/* Initially a 10 us delay. Turned it into a PCI commit. - FR */
RTL_R8(tp, IntrMask);
RTL_W8(tp, ChipCmd, CmdTxEnb | CmdRxEnb);
@@ -4734,12 +4732,6 @@ static void rtl_hw_start_8169(struct rtl8169_private *tp)
rtl8169_set_magic_reg(tp, tp->mac_version);
- /*
- * Undocumented corner. Supposedly:
- * (TxTimer << 12) | (TxPackets << 8) | (RxTimer << 4) | RxPackets
- */
- RTL_W16(tp, IntrMitigate, 0x0000);
-
RTL_W32(tp, RxMissed, 0);
}
@@ -5456,12 +5448,6 @@ static void rtl_hw_start_8168(struct rtl8169_private *tp)
{
RTL_W8(tp, MaxTxPacketSize, TxPacketMax);
- tp->cp_cmd &= ~INTT_MASK;
- tp->cp_cmd |= PktCntrDisable | INTT_1;
- RTL_W16(tp, CPlusCmd, tp->cp_cmd);
-
- RTL_W16(tp, IntrMitigate, 0x5100);
-
/* Work around for RxFIFO overflow. */
if (tp->mac_version == RTL_GIGA_MAC_VER_11) {
tp->irq_mask |= RxFIFOOver;
@@ -5749,8 +5735,6 @@ static void rtl_hw_start_8101(struct rtl8169_private *tp)
rtl_hw_start_8168h_1(tp);
break;
}
-
- RTL_W16(tp, IntrMitigate, 0x0000);
}
static int rtl8169_change_mtu(struct net_device *dev, int new_mtu)
--
2.21.0
next reply other threads:[~2019-03-31 13:44 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-31 13:43 Heiner Kallweit [this message]
2019-03-31 18:13 ` [PATCH net-next] r8169: disable tx interrupt coalescing on RTL8168 David Miller
2019-03-31 18:16 ` Heiner Kallweit
2019-03-31 18:23 ` David Miller
2019-03-31 18:33 ` Heiner Kallweit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=23289428-64e1-206c-385e-b1ce9c4cc14c@gmail.com \
--to=hkallweit1@gmail.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=nic_swsd@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox