* Re: [PATCH] USB: net: Fix asix read transfer buffer allocations.
From: Valentine Barshak @ 2007-10-22 19:22 UTC (permalink / raw)
To: Oliver Neukum; +Cc: netdev, linux-usb-devel
In-Reply-To: <200710221929.04035.oliver@neukum.org>
Oliver Neukum wrote:
> Am Montag 22 Oktober 2007 schrieb Valentine Barshak:
>> static int asix_mdio_read(struct net_device *netdev, int phy_id, int loc)
>> {
>> struct usbnet *dev = netdev_priv(netdev);
>> + void *buf;
>> u16 res;
>>
>> mutex_lock(&dev->phy_mutex);
>> asix_set_sw_mii(dev);
>> +
>> + buf = kmalloc(2, GFP_KERNEL);
>
> This is done under lock. Can you allocate the buffer once and reuse it?
>
> Regards
> Oliver
>
I think we can use 2 bytes of the usbnet data buffer for this.
I'll submit a new patch soon.
Thanks,
Valentine.
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
^ permalink raw reply
* Re: kernel panic when running tcpdump
From: Andrew Morton @ 2007-10-22 19:03 UTC (permalink / raw)
To: Mariusz Kozlowski; +Cc: Jeff Garzik, linux-kernel, netdev, linux-ppp
In-Reply-To: <200710222040.19921.m.kozlowski@tuxland.pl>
On Mon, 22 Oct 2007 20:40:18 +0200 Mariusz Kozlowski <m.kozlowski@tuxland.pl> wrote:
> I'm seeing reproducible oops on 2.6.23-mm1 when trying to run tcpdump
> over ppp0 interface.
Can you please test the latest Linus kernel from
ftp://ftp.kernel.org/pub/linux/kernel/v2.6/snapshots/?
Because all netwrking things which were in 2.6.23-mm1 are now in mainline.
So if mainline is OK then that bug presumably got fixed.
Thanks.
^ permalink raw reply
* Re: [PATCH 1/6] Convert bonding timers to workqueues
From: Jay Vosburgh @ 2007-10-22 18:57 UTC (permalink / raw)
To: Jeff Garzik; +Cc: Mike Snitzer, netdev, andy
In-Reply-To: <471CED48.207@garzik.org>
Jeff Garzik <jeff@garzik.org> wrote:
[...]
>I wasn't aware this brand-new code is a bug fix?
>
>Normally brand new code needs to be posted and reviewed and committed to a
>tree -before- the merge window opens.
I had thought this was going in ok, as you'd attempted to apply
it after the IPoIB stuff a week or so ago, but it needed to be rebased
and you'd had concerns about bisect.
In any event, I'd argue it's changes to fix locking bugs
(various "sleep with lock held" and ASSERT_RTNLs, e.g., bug 7974 on
bugzilla.kernel.org); this isn't a feature add or a refactor just for
efficiency.
-J
---
-Jay Vosburgh, IBM Linux Technology Center, fubar@us.ibm.com
^ permalink raw reply
* Re: appletalk bugs
From: Eric W. Biederman @ 2007-10-22 18:55 UTC (permalink / raw)
To: Linus Torvalds
Cc: Andrew Morton, Gabriel C, Linux Kernel Mailing List, netdev
In-Reply-To: <471CB159.1070706@googlemail.com>
Gabriel C <nix.or.die@googlemail.com> writes:
> Hi,
>
> modprobing appletalk on current git gives a warning in dmesg :
>
> [38506.600269] sysctl table check failed: /net/appletalk .3.7 procname does not
> match binary path procname
Oops. My apologies it appears I made a mistake when creating my
table to check up on sysctl values.
This should fix it.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
diff --git a/kernel/sysctl_check.c b/kernel/sysctl_check.c
index 3c9ef5a..ed6fe51 100644
--- a/kernel/sysctl_check.c
+++ b/kernel/sysctl_check.c
@@ -731,7 +731,7 @@ static struct trans_ctl_table trans_net_table[] = {
{ NET_UNIX, "unix", trans_net_unix_table },
{ NET_IPV4, "ipv4", trans_net_ipv4_table },
{ NET_IPX, "ipx", trans_net_ipx_table },
- { NET_ATALK, "atalk", trans_net_atalk_table },
+ { NET_ATALK, "appletalk", trans_net_atalk_table },
{ NET_NETROM, "netrom", trans_net_netrom_table },
{ NET_AX25, "ax25", trans_net_ax25_table },
{ NET_BRIDGE, "bridge", trans_net_bridge_table },
^ permalink raw reply related
* kernel panic when running tcpdump
From: Mariusz Kozlowski @ 2007-10-22 18:40 UTC (permalink / raw)
To: Andrew Morton, Jeff Garzik; +Cc: linux-kernel, netdev, linux-ppp
In-Reply-To: <20071011213126.cf92efb7.akpm@linux-foundation.org>
[-- Attachment #1: Type: text/plain, Size: 935 bytes --]
Hello,
I'm seeing reproducible oops on 2.6.23-mm1 when trying to run tcpdump
over ppp0 interface. To reproduce I type simply:
# tcpdump -i ppp0
and wait a few seconds. I captured two oopses with a bit different stack
trace but EIP always points to packet_rcv():
(gdb) l* 0xc02d7d49
0xc02d7d49 is in packet_rcv (include/linux/netdevice.h:830).
825 static inline int dev_parse_header(const struct sk_buff *skb,
826 unsigned char *haddr)
827 {
828 const struct net_device *dev = skb->dev;
829
830 if (!dev->header_ops->parse)
831 return 0;
832 return dev->header_ops->parse(skb, haddr);
833 }
834
Please find pics attached (sorry for poor quality - I can provide you with better ones
tommorow if needed):
http://tuxland.pl/misc/2.6.23-mm1/DSC00136.JPG
http://tuxland.pl/misc/2.6.23-mm1/DSC00142.JPG
Regards,
Mariusz
[-- Attachment #2: .config --]
[-- Type: text/plain, Size: 40876 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.23-mm1
# Fri Oct 12 09:13:32 2007
#
CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_QUICKLIST=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_KPAGEMAP=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP is not set
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MCORE2 is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_XADD=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
# CONFIG_HPET_TIMER is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
# CONFIG_X86_UP_APIC is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_DMIID is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_X86_PAE is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_NR_QUICK=1
CONFIG_VIRT_TO_BUS=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
# CONFIG_KEXEC is not set
CONFIG_PHYSICAL_START=0x100000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x100000
# CONFIG_COMPAT_VDSO is not set
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_SUSPEND_UP_POSSIBLE=y
# CONFIG_SUSPEND is not set
CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROC_EVENT is not set
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_I82365=m
CONFIG_TCIC=m
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=m
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
CONFIG_NET_SCH_FIFO=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Wireless
#
CONFIG_CFG80211=y
CONFIG_NL80211=y
CONFIG_WIRELESS_EXT=y
CONFIG_MAC80211=y
# CONFIG_MAC80211_DEBUG is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_IEEE80211_SOFTMAC=m
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
# CONFIG_PARPORT_1284 is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_TIFM_CORE=m
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDECS is not set
# CONFIG_BLK_DEV_DELKIN is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
CONFIG_BLK_DEV_ALI15X3=y
# CONFIG_WDC_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_IDE_ARM is not set
#
# Other IDE chipsets support
#
#
# Note: most of these also require special kernel boot parameters
#
# CONFIG_BLK_DEV_4DRIVES is not set
# CONFIG_BLK_DEV_ALI14XX is not set
# CONFIG_BLK_DEV_DTC2278 is not set
# CONFIG_BLK_DEV_HT6560B is not set
# CONFIG_BLK_DEV_QD65XX is not set
# CONFIG_BLK_DEV_UMC8672 is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
# CONFIG_BLK_DEV_SD is not set
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
# CONFIG_FIREWIRE_OHCI is not set
# CONFIG_FIREWIRE_SBP2 is not set
CONFIG_IEEE1394=m
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
#
# Controllers
#
#
# Texas Instruments PCILynx requires I2C
#
# CONFIG_IEEE1394_OHCI1394 is not set
#
# Protocols
#
# CONFIG_IEEE1394_SBP2 is not set
# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_RAWIO is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_NET_POCKET is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_LIBERTAS is not set
# CONFIG_AIRO is not set
CONFIG_HERMES=m
# CONFIG_PLX_HERMES is not set
# CONFIG_TMD_HERMES is not set
# CONFIG_NORTEL_HERMES is not set
# CONFIG_PCI_HERMES is not set
# CONFIG_USB_ATMEL is not set
CONFIG_PCMCIA_HERMES=m
# CONFIG_PCMCIA_SPECTRUM is not set
# CONFIG_ATMEL is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_P54_COMMON is not set
# CONFIG_IWLWIFI is not set
# CONFIG_HOSTAP is not set
# CONFIG_BCM43XX is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=m
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
# CONFIG_VT_UNICODE is not set
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
CONFIG_FIX_EARLYCON_MEM=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=m
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_SONYPI=m
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS_CS is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
# CONFIG_WATCHDOG is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_DAB is not set
#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
CONFIG_AGP_ATI=y
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
# CONFIG_FB_HECUBA is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_VIDEO_SELECT=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set
#
# ISA devices
#
# CONFIG_SND_ADLIB is not set
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_DT019X is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_SC6000 is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_MIRO is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
# CONFIG_SND_WAVEFRONT is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
CONFIG_SND_ALI5451=m
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set
#
# SoC Audio support for SuperH
#
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_GENERIC is not set
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_CH341 is not set
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_DEBUG=m
CONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GOTEMP is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
# CONFIG_MMC_PASSWORDS is not set
#
# MMC/SD Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
#
# MMC/SD Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_AMD76X=m
CONFIG_EDAC_E7XXX=m
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82875P=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I82860=m
CONFIG_EDAC_R82600=m
CONFIG_EDAC_I5000=m
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
CONFIG_RTC_DRV_TEST=m
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_STK17TA8=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_V3020=m
#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_REISER4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=1250
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-2"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
#
# Layered filesystems
#
# CONFIG_UNION_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp1250"
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-2"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=m
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_SLAB_LEAK=y
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_TRACE_IRQFLAGS=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
# CONFIG_PROFILE_LIKELY is not set
CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DEBUG_SYNCHRO_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_WANT_EXTRA_DEBUG_INFORMATION is not set
# CONFIG_UNWIND_INFO is not set
# CONFIG_KGDB is not set
# CONFIG_KGDB_ATTACH_WAIT is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_4KSTACKS is not set
CONFIG_DOUBLEFAULT=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_586 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_KTIME_SCALAR=y
^ permalink raw reply
* Re: [PATCH 1/6] Convert bonding timers to workqueues
From: Jeff Garzik @ 2007-10-22 18:34 UTC (permalink / raw)
To: Mike Snitzer, Jay Vosburgh; +Cc: netdev, andy
In-Reply-To: <170fa0d20710220755w744e8ec8w1d85cae4f4be822e@mail.gmail.com>
Mike Snitzer wrote:
> Given that Jay rebased and posted updated bonding locking patches on
> Oct 17 will you be pushing them for inclusion in 2.6.24-rc1? or
> 2.6.24-rcX? I don't see them queued in your netdev-2.6 tree. These
> bonding locking issues have been a problem for some time and it would
> be very good to get them fixed upstream sooner rather than later.
I wasn't aware this brand-new code is a bug fix?
Normally brand new code needs to be posted and reviewed and committed to
a tree -before- the merge window opens.
Jeff
^ permalink raw reply
* [PATCH] [net/ipv4]: fib_seq_show function adjustment to get a more sensable output of /proc/net/route
From: Denis Cheng @ 2007-10-22 18:26 UTC (permalink / raw)
To: David S. Miller, Jeff Garzik; +Cc: netdev, linux-kernel, Denis Cheng
the temporary bf[127] char array is redundant, and the specified width 127 make the output of /proc/net/route include many trailing spaces;
since most terminal's cols are less than 127, this made every fib entry occupy two lines,
after applied this patch, the output of /proc/net/route is more sensable like this:
Iface Destination Gateway Flags RefCnt Use Metric Mask MTU Window IRTT
eth0 0001A8C0 00000000 0001 0 0 0 00FFFFFF 0 0 0
lo 0000007F 00000000 0001 0 0 0 000000FF 0 0 0
eth0 00000000 0101A8C0 0003 0 0 0 00000000 0 0 0
Signed-off-by: Denis Cheng <crquan@gmail.com>
---
net/ipv4/fib_hash.c | 15 +++++++--------
1 files changed, 7 insertions(+), 8 deletions(-)
diff --git a/net/ipv4/fib_hash.c b/net/ipv4/fib_hash.c
index 527a6e0..2a4033e 100644
--- a/net/ipv4/fib_hash.c
+++ b/net/ipv4/fib_hash.c
@@ -992,7 +992,6 @@ static unsigned fib_flag_trans(int type, __be32 mask, struct fib_info *fi)
static int fib_seq_show(struct seq_file *seq, void *v)
{
struct fib_iter_state *iter;
- char bf[128];
__be32 prefix, mask;
unsigned flags;
struct fib_node *f;
@@ -1000,9 +999,9 @@ static int fib_seq_show(struct seq_file *seq, void *v)
struct fib_info *fi;
if (v == SEQ_START_TOKEN) {
- seq_printf(seq, "%-127s\n", "Iface\tDestination\tGateway "
+ seq_printf(seq, "Iface\tDestination\tGateway "
"\tFlags\tRefCnt\tUse\tMetric\tMask\t\tMTU"
- "\tWindow\tIRTT");
+ "\tWindow\tIRTT\n");
goto out;
}
@@ -1014,18 +1013,18 @@ static int fib_seq_show(struct seq_file *seq, void *v)
mask = FZ_MASK(iter->zone);
flags = fib_flag_trans(fa->fa_type, mask, fi);
if (fi)
- snprintf(bf, sizeof(bf),
- "%s\t%08X\t%08X\t%04X\t%d\t%u\t%d\t%08X\t%d\t%u\t%u",
+ seq_printf(seq,
+ "%s\t%08X\t%08X\t%04X\t%d\t%u\t%d\t%08X\t%d\t%u\t%u\n",
fi->fib_dev ? fi->fib_dev->name : "*", prefix,
fi->fib_nh->nh_gw, flags, 0, 0, fi->fib_priority,
mask, (fi->fib_advmss ? fi->fib_advmss + 40 : 0),
fi->fib_window,
fi->fib_rtt >> 3);
else
- snprintf(bf, sizeof(bf),
- "*\t%08X\t%08X\t%04X\t%d\t%u\t%d\t%08X\t%d\t%u\t%u",
+ seq_printf(seq,
+ "*\t%08X\t%08X\t%04X\t%d\t%u\t%d\t%08X\t%d\t%u\t%u\n",
prefix, 0, flags, 0, 0, 0, mask, 0, 0, 0);
- seq_printf(seq, "%-127s\n", bf);
+
out:
return 0;
}
--
1.5.3.4
^ permalink raw reply related
* Re: [PATCH 5/7] pci: Export the pci_restore_msi_state() function
From: Linas Vepstas @ 2007-10-22 18:19 UTC (permalink / raw)
To: David Miller; +Cc: mchan, mcarlson, netdev, linux-pci
In-Reply-To: <20071021.214520.66310568.davem@davemloft.net>
On Sun, Oct 21, 2007 at 09:45:20PM -0700, David Miller wrote:
>
> The core issue is that the ARCH level MSI code invokes
> write_msi_msg(), not the generic code, exactly because there
> are platform level issues wherein the firmware is the only
> legal way to write the MSI settings in PCI config space.
>
> However, the MSI state restore code was not architected similarly. It
> does the write_msi_msg() directly, instead of letting platform level
> code is in ARCH hooks.
Yes, exactly.
> Therefore I think we need to attack this in two stages:
>
> 1) First changeset moves the write_msi_msg() call currently in
> __pci_restore_msi_state() into an ARCH overridable handler.
>
> This would allow powerpc to deal with this properly.
Yes!
I'll try to put together a patch later today, if I can get
a fabled "round tuit".
> pci_restor_msi_state() can get exported to modules in this
> change
OK.
> 2) The Tigon3 error recovery changes, as they were.
>
> But I have to ask, can anyone see how e1000 handles MSI properly
> in it's PCI error support?
It doesn't. None of them do. :-( I didn't get access to msi-capable
hardware until a few weeks ago; that's why this is coming up just now.
--linas
^ permalink raw reply
* Re: [PATCH 5/7] pci: Export the pci_restore_msi_state() function
From: Linas Vepstas @ 2007-10-22 18:13 UTC (permalink / raw)
To: Michael Ellerman
Cc: David Miller, mcarlson, netdev, linux-pci, mchan,
linuxppc-dev list
In-Reply-To: <1193017764.10318.17.camel@concordia>
On Mon, Oct 22, 2007 at 11:49:24AM +1000, Michael Ellerman wrote:
>
> On pseries there's a chance it will work for PCI error recovery, but if
> so it's just lucky that firmware has left everything configured the same
> way.
? The papr is quite clear that i is up to the OS to restore the msi
state after an eeh error.
> Yes I think so. That way we can properly reconfigure via the firmware
> interface. The other option would be to design some new arch hook to do
> resume, but just doing a disable/enable seems simpler to me.
Err, If you read the code for suspend/resume, it never actually calls
disable/enable (and thus doesn't go to the firmware); it calls
restore_msi_state() function!
If suspend/resume needs to call firmware to restore the state, then,
at the moment, suspend/resume is broken. As I mentioned earlier,
I presumed that no powerpc laptops currently use msi-enabled devices,
as otherwise, this would have been flushed out.
--linas
^ permalink raw reply
* Re: [Bugme-new] [Bug 9208] New: Oops on sky2, delete_module causes SIGKILL
From: Andrew Morton @ 2007-10-22 18:12 UTC (permalink / raw)
To: netdev; +Cc: bugme-daemon, jkarlson, Stephen Hemminger
In-Reply-To: <bug-9208-10286@http.bugzilla.kernel.org/>
On Mon, 22 Oct 2007 06:58:37 -0700 (PDT) bugme-daemon@bugzilla.kernel.org wrote:
> http://bugzilla.kernel.org/show_bug.cgi?id=9208
>
> Summary: Oops on sky2, delete_module causes SIGKILL
> Product: Drivers
> Version: 2.5
> KernelVersion: linux-2.6.23-git17
> Platform: All
> OS/Version: Linux
> Tree: Mainline
> Status: NEW
> Severity: normal
> Priority: P1
> Component: Network
> AssignedTo: jgarzik@pobox.com
> ReportedBy: jkarlson@cc.hut.fi
>
>
> Most recent kernel where this bug did not occur:
> linux-2.6.23-git-13
>
> Distribution:
> gentoo
>
> Hardware Environment:
> macbook revision2
>
> Software Environment:
> gcc-4.2.2, glibc-2.6.1-r0, 2.6.23-git14...17 x86_64
> sys-devel/binutils: 2.18-r1
> sys-apps/module-init-tools-3.2.2-r3
>
> Problem Description:
> on dmesg
>
> sky2 eth0: enabling interface
> sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
> hda: selected mode 0x44
> appletouch: incomplete data package (first byte: 2, length: 4).
> Unable to handle kernel NULL pointer dereference at 00000000000003b0 RIP:
> [<ffffffff804ae161>] unregister_netdevice+0x21/0x180
> PGD abb2067 PUD 3ee9067 PMD 0
> Oops: 0000 [1] SMP
> CPU 1
> Modules linked in: snd_hda_intel snd_pcm snd_page_alloc i2c_i801 sky2
> Pid: 4791, comm: modprobe Not tainted 2.6.23-git17 #2
> RIP: 0010:[<ffffffff804ae161>] [<ffffffff804ae161>]
> unregister_netdevice+0x21/0x180
> RSP: 0018:ffff81000a9addf8 EFLAGS: 00010246
> RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00000000ffffffff
> RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff80639050
> RBP: ffff810003da5e80 R08: 0000000000000000 R09: 000000000000102a
> R10: 0000000000000000 R11: ffffffff8029f6a0 R12: ffff8100022c0800
> R13: ffffffff8800c440 R14: ffffffff8800c498 R15: ffffffff8800c490
> FS: 00002b16510c3b00(0000) GS:ffff810002076e40(0000) knlGS:0000000000000000
> CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> CR2: 00000000000003b0 CR3: 000000000aaf4000 CR4: 00000000000026e0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> Process modprobe (pid: 4791, threadinfo ffff81000a9ac000, task
> ffff810003e1a740)
> Stack: 0000000000000000 ffffffff804ae2d1 0000000000000000 ffffffff88004670
> ffff8100022c0870 ffff8100022c0800 ffff8100022c6870 ffffffff80393a4c
> ffffffff8800c440 ffff8100022c0870 ffffffff8800c440 ffffffff803f91c2
> Call Trace:
> [<ffffffff804ae2d1>] unregister_netdev+0x11/0x20
> [<ffffffff88004670>] :sky2:sky2_remove+0x40/0xf0
> [<ffffffff80393a4c>] pci_device_remove+0x2c/0x60
> [<ffffffff803f91c2>] __device_release_driver+0x82/0xc0
> [<ffffffff803f9805>] driver_detach+0xf5/0x100
> [<ffffffff803f8c2d>] bus_remove_driver+0x8d/0xb0
> [<ffffffff80393ab8>] pci_unregister_driver+0x18/0x90
> [<ffffffff8025e19d>] sys_delete_module+0x14d/0x1e0
> [<ffffffff80384e82>] __up_write+0x22/0x130
> [<ffffffff8020bc5e>] system_call+0x7e/0x83
>
>
> Code: 8b 83 b0 03 00 00 85 c0 75 39 48 89 da 48 89 de 48 c7 c7 20
> RIP [<ffffffff804ae161>] unregister_netdevice+0x21/0x180
> RSP <ffff81000a9addf8>
> CR2: 00000000000003b0
>
>
> Steps to reproduce:
> rmmod sky2
>
>
> --
> Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
> ------- You are receiving this mail because: -------
> You are on the CC list for the bug, or are watching someone who is.
^ permalink raw reply
* Re: [PATCH 5/7] pci: Export the pci_restore_msi_state() function
From: Linas Vepstas @ 2007-10-22 18:07 UTC (permalink / raw)
To: David Miller; +Cc: mcarlson, netdev, linux-pci, mchan
In-Reply-To: <20071021.162131.43417026.davem@davemloft.net>
On Sun, Oct 21, 2007 at 04:21:31PM -0700, David Miller wrote:
> From: "Matt Carlson" <mcarlson@broadcom.com>
> Date: Fri, 19 Oct 2007 14:36:56 -0700
>
> > This patch exports the pci_restore_msi_state() function. This function
> > is needed to restore the MSI state during PCI error recovery.
> >
> > Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
> > Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
> > Signed-off-by: Michael Chan <mchan@broadcom.com>
>
> I'm not so sure about this.
>
> Perhaps, instead, you should do a pci_msi_disable() and
> pci_msi_enable() in the error detection and recovery sequence.
>
> Or, alternatively, save/restore those MSI registers by hand.
>
> I'm trying to figure out how the E1000 driver handles this correctly,
> but I can't see it just by reading it over quickly.
The e1000 and the ixgb are broken as well ... right now, any
driver that uses msi together with the pci error recovery will
fail to get recovered correctly. There are several distinct bugs;
one is that, msi state is not being restored; and the call to
pci_restore_msi_state() was supposed to aid with that.
I'd rather not use pci_msi_disable(), because that has the
side-effect of enabling legacy interupts; I'm concerned that
this will have the potential for causing havoc of all sorts.
--linas
^ permalink raw reply
* Re: [PATCH] flush_work_sync vs. flush_scheduled_work Re: [PATCH] PHYLIB: IRQ event workqueue handling fixes
From: Oleg Nesterov @ 2007-10-22 18:02 UTC (permalink / raw)
To: Jarek Poplawski
Cc: Maciej W. Rozycki, Andy Fleming, Andrew Morton, Jeff Garzik,
netdev, linux-kernel
In-Reply-To: <20071022061143.GA973@ff.dom.local>
On 10/22, Jarek Poplawski wrote:
>
> On Fri, Oct 19, 2007 at 09:50:14AM +0200, Jarek Poplawski wrote:
> > On Thu, Oct 18, 2007 at 07:48:19PM +0400, Oleg Nesterov wrote:
> > > On 10/18, Jarek Poplawski wrote:
> > > >
> > > > +/**
> > > > + * flush_work_sync - block until a work_struct's callback has terminated
> > > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> > > Hmm...
> > >
> > > > + * Similar to cancel_work_sync() but will only busy wait (without cancel)
> > > > + * if the work is queued.
> > >
> > > Yes, it won't block, but will spin in busy-wait loop until all other works
> > > scheduled before this work are finished. Not good. After that it really
> > > blocks waiting for this work to complete.
> > >
> > > And I am a bit confused. We can't use flush_workqueue() because some of the
> > > queued work_structs may take rtnl_lock, yes? But in that case we can't use
> > > the new flush_work_sync() helper as well, no?
>
> OK, I know I'm dumber and dumber everyday,
You are not alone. I have the same feeling about myself!
> these all flushes are
> rtnl lockup vulnerable wrt. other work functions, but cancel_work_sync
> looks perfectly fine
Yes,
> Then, if by any chance I'm right, something like flush_work_sync
> (or changed flush_scheduled_work, if there is no problem with such
> a change of implementation) could be safely (if it's called without
> locks used by flushed work only) done cancel_work_sync() way, by
> running a work function after try_to_grab_pending() returns 1
If this work doesn't rearm itself - yes. (otherwise, the same ->func
can run twice _at the same time_)
But again, in this case wait_on_work() after try_to_grab_pending() == 1
doesn't block, so we can just do
if (cancel_work_sync(w))
w->func();
Oleg.
^ permalink raw reply
* Re: [PATCH] USB: net: Fix asix read transfer buffer allocations.
From: Oliver Neukum @ 2007-10-22 17:29 UTC (permalink / raw)
To: linux-usb-devel; +Cc: netdev
In-Reply-To: <20071022155053.GA28526@ru.mvista.com>
Am Montag 22 Oktober 2007 schrieb Valentine Barshak:
> static int asix_mdio_read(struct net_device *netdev, int phy_id, int loc)
> {
> struct usbnet *dev = netdev_priv(netdev);
> + void *buf;
> u16 res;
>
> mutex_lock(&dev->phy_mutex);
> asix_set_sw_mii(dev);
> +
> + buf = kmalloc(2, GFP_KERNEL);
This is done under lock. Can you allocate the buffer once and reuse it?
Regards
Oliver
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
^ permalink raw reply
* [PATCH] defxx.c: dfx_bus_init() is __devexit not __devinit
From: Maciej W. Rozycki @ 2007-10-22 17:13 UTC (permalink / raw)
To: Andrew Morton, Jeff Garzik; +Cc: netdev, linux-kernel
The dfx_bus_uninit() call is called from dfx_unregister() which is
__devexit and which is ultimately the ->remove call for the device.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
---
It should be obvious. Please apply.
Maciej
patch-mips-2.6.23-rc5-20070904-defxx-devexit-0
diff -up --recursive --new-file linux-mips-2.6.23-rc5-20070904.macro/drivers/net/defxx.c linux-mips-2.6.23-rc5-20070904/drivers/net/defxx.c
--- linux-mips-2.6.23-rc5-20070904.macro/drivers/net/defxx.c 2007-09-04 04:55:41.000000000 +0000
+++ linux-mips-2.6.23-rc5-20070904/drivers/net/defxx.c 2007-10-12 00:21:35.000000000 +0000
@@ -806,7 +806,7 @@ static void __devinit dfx_bus_init(struc
* Interrupts are disabled at the adapter bus-specific logic.
*/
-static void __devinit dfx_bus_uninit(struct net_device *dev)
+static void __devexit dfx_bus_uninit(struct net_device *dev)
{
DFX_board_t *bp = netdev_priv(dev);
struct device *bdev = bp->bus_dev;
^ permalink raw reply
* Re: CC2420 (802.15.4) Speed Issue
From: Rick Jones @ 2007-10-22 16:59 UTC (permalink / raw)
To: Michael Whyte; +Cc: netdev
In-Reply-To: <177fe7690710211747p23156475m9e880da04e1574c2@mail.gmail.com>
Michael Whyte wrote:
> Hi Guys,
>
> I'm currently writing my first bit of Linux kernel code so be gentle.
> It's a driver for TI CC2420 802.15.4 radio and I'm observing strange
> behavior. I am currently testing just by transferring a ~300kb file
> over HTTP between two of these devices.
Into which revision of the kernel are you inserting your driver?
> The strange thing is, when ever you start the transfer it starts
> humming along at 5k/s which is not far off what I'd expect these
> devices to achieve, then at some random point along the transfer or
> sometimes not at all... it suddenly drops fairly deterministically to
> 150byte/s and finishes the transfer at that speed, maybe rising to
> 170bytes/s by the end of the transfer is I'm lucky.
>
> I don't really know where to start looking to solve the problem, it
> seems everything is functioning as it should at least some of the time
> as in some cases it will complete the whole transfer at the 5k/s
> speed. Is it just tcp throttling very harshly (i.e. 50x) when it loses
> a packet?
See below re packet traces and stats.
> Is it the Xscale chip scaling down the CPU frequency
> mid-transfer, I've got no idea how to check this?
Knowing nothing about Xscale I'd wonder if there wasn't a regsiter on it
somewhere you could query for its current CPU frequency. Otherwise, if the CPU
is slowing down, presumably that should show-up as a change in power consumption
for the whole device which you could in theory measure with a power meter.
> It is some sort of
> resonance affect happening with the two radios CCA although I'm not
> seeing any CCA timeouts.
>
> Can any one give any hints what to play with or where to look to try
> find the cause and get the transfers to run reliabily without the
> sudden bottoming out of speeds? (if you stop the transfer and initiate
> a new one immediately it will start at full speed again)
Might also check the netstat statistics for TCP - netstat -s -t. You might find
that at the point where the performance drops there was a non-trivial packet
loss event taking the congestion window down. Should show-up in a packet trace
as well.
If you want to eliminate any possibility of http server issues (as close to
epsilon as they probably are) you could use a netperf TCP_CRR test:
netperf -H <server> -t TCP_CRR -l <time> -- -r 256,300K
You could also add some -s and -S options to the end of that to constrain the
TCP windows which might be an interesting experiment.
rick jones
^ permalink raw reply
* Re: [RFC] remove netpoll receive code
From: Matt Mackall @ 2007-10-22 16:54 UTC (permalink / raw)
To: Stephen Hemminger; +Cc: David S. Miller, Andrew Morton, netdev, linux-kernel
In-Reply-To: <20071017132131.1992bedd@freepuppy.rosehill>
[annoyed as ever about never being cc:ed on this stuff]
On Wed, Oct 17, 2007 at 01:21:31PM -0700, Stephen Hemminger wrote:
> The netpoll receive code is:
> 1. Not used by any in-tree features, it is used by kgdb-over-ether.
And various crashdump over network tools.
> 2. A nice hook for people doing nasty things like private binary network stacks or rootkits.
It's a completely useless hook for a binary network stack. It only
supports UDP and only point to point. And it will have crap
performance. It's much less useful here than, say, TUN/TAP.
It doesn't buy anything for a rootkit either, which will continue to
trivially hide servers in userspace as they already do.
This point is completely FUD.
> 3. Unsecured by any of the normal firewalling code.
This is correct. It also applies to the TX side of things. The point,
of course, is to bypass as much of the stack as possible so that when
the kernel crashes, we're more likely to actually get our netpoll
data.
> I propose that we take out all the whole netpoll rx path. If/when
> kgdb gets submitted a better and alternative receive path can be
> added.
Let's hear about this better alternative first, shall we? I for one am
a little skeptical of its existence. Going through a larger fraction
of the network stack, running softirqs, etc., are all big (potentially
fatal) steps backward from the point of view of a debugger.
--
Mathematics is the supreme nostalgia of our time.
^ permalink raw reply
* Re: Regression in current git - Network Manager fails (bisected)
From: Dan Williams @ 2007-10-22 15:57 UTC (permalink / raw)
To: Denis V. Lunev; +Cc: netdev, Denis V. Lunev, David S. Miller, Alexey Kuznetsov
In-Reply-To: <471C6BEC.4010604@sw.ru>
On Mon, 2007-10-22 at 13:22 +0400, Denis V. Lunev wrote:
> We have spent some time with the problem with Alexey and there are no
> guesses for now.
>
> Is it possible to name exact version of Network Manager and all
> libraries related + provide us an output of strace with full buffers
> send/received from netlink. Something like
> strace -v -x -s 32768 <nm>
NM uses netlink in two places; libnl (from Thomas Graf) and some custom
code for listening for interface up/down events and wireless events.
It looks like that code comes from libnl's lib/handlers.c where it
thinks the received message is invalid.
I'm pretty sure the code that checks carrier status of the device isn't
libnl code; so maybe the error message (which should get fixed of
course) isn't in the same path as the link detection.
The link detection comes from src/nm-netlink-monitor.c, so maybe we
should look at debugging there.
Dan
> Regards,
> Den
>
> Joseph Fannin wrote:
> > Network Manager (the freedesktop.org one) fails to work with Linus's
> > current git on a couple of different boxes I have here. All the boxes
> > have different NIC types, with different drivers.
> >
> > I've bisected it down to cd40b7d3983c708aabe3d3008ec64ffce56d33b0 ,
> > "[NET]: make netlink user -> kernel interface synchronious". I've
> > double checked this by testing the kernel as of the immediately
> > previous commit; Network Manager works with that one, as it did on all
> > my machines in 2.6.23-mm1.
> >
> > The netlink change seems to confuse N-M, and it somehow decides that
> > there's no link beat, so doesn't try to bring up the interface. If I
> > run "ifconfig eth0 up", N-M will decide there's a carrier after all
> > and takes over. Ethtool detects the link state correctly even with
> > the interface down.
> >
> > If I down the interface again with ifconfig, N-M brings it right back
> > up without a problem, but if I kill N-M, it'll down the interface
> > before it exits, and fail in the same way as before when restarted.
> >
> > N-M also emits this error:
> >
> > "-- Error: Invalid message: type=DONE length=20 flags=<MULTI> sequence-nr=1193012574 pid=1185943630"
> >
> > ...which it doesn't do on kernels where it works normally.
> > strace'ing NetworkManager shows that it prints that message just after
> > talking over a netlink socket.
> >
> > Networking otherwise works fine here with the latest git and N-M, if I
> > use the ifconfig "trick" to get the link up.
> >
> > --
> > Joseph Fannin
> > jfannin@gmail.com
> >
> >
>
> -
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* [PATCH] Explicitly call fib_get_table() in fib_frontend.c
From: Pavel Emelyanov @ 2007-10-22 15:56 UTC (permalink / raw)
To: David Miller; +Cc: Linux Netdev List, devel
In case the "multiple tables" config option is y, the ip_fib_local_table
is not a variable, but a macro, that calls fib_get_table(RT_TABLE_LOCAL).
Some code uses this "variable" *3* times in one place, thus implicitly
making 3 calls. Fix it.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
---
diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c
index 78b514b..6012390 100644
--- a/net/ipv4/fib_frontend.c
+++ b/net/ipv4/fib_frontend.c
@@ -128,13 +128,14 @@ struct net_device * ip_dev_find(__be32 addr)
struct flowi fl = { .nl_u = { .ip4_u = { .daddr = addr } } };
struct fib_result res;
struct net_device *dev = NULL;
+ struct fib_table *local_table;
#ifdef CONFIG_IP_MULTIPLE_TABLES
res.r = NULL;
#endif
- if (!ip_fib_local_table ||
- ip_fib_local_table->tb_lookup(ip_fib_local_table, &fl, &res))
+ local_table = fib_get_table(RT_TABLE_LOCAL);
+ if (!local_table || local_table->tb_lookup(local_table, &fl, &res))
return NULL;
if (res.type != RTN_LOCAL)
goto out;
@@ -152,6 +153,7 @@ unsigned inet_addr_type(__be32 addr)
struct flowi fl = { .nl_u = { .ip4_u = { .daddr = addr } } };
struct fib_result res;
unsigned ret = RTN_BROADCAST;
+ struct fib_table *local_table;
if (ZERONET(addr) || BADCLASS(addr))
return RTN_BROADCAST;
@@ -162,10 +164,10 @@ unsigned inet_addr_type(__be32 addr)
res.r = NULL;
#endif
- if (ip_fib_local_table) {
+ local_table = fib_get_table(RT_TABLE_LOCAL);
+ if (local_table) {
ret = RTN_UNICAST;
- if (!ip_fib_local_table->tb_lookup(ip_fib_local_table,
- &fl, &res)) {
+ if (!local_table->tb_lookup(local_table, &fl, &res)) {
ret = res.type;
fib_res_put(&res);
}
^ permalink raw reply related
* [PATCH] USB: net: Fix asix read transfer buffer allocations.
From: Valentine Barshak @ 2007-10-22 15:50 UTC (permalink / raw)
To: linux-usb-devel; +Cc: netdev
On systems with noncoherent cache, allocating dma buffers
on the stack for USB IN transfers causes kernel crash,
because usb map_urb_for_dma() code calls dma_map_single(),
that invalidates data cache for DMA_FROM_DEVICE transfer direction
and causes stack data loss if transfer size is less than cache line
and not cache-line aligned. This patch makes asix usb network
driver allocate USB IN transfer buffers with kmalloc instead of
directly using variables on stack.
Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
---
drivers/net/usb/asix.c | 21 +++++++++++++++++++--
1 files changed, 19 insertions(+), 2 deletions(-)
diff -pruN linux-2.6.orig/drivers/net/usb/asix.c linux-2.6/drivers/net/usb/asix.c
--- linux-2.6.orig/drivers/net/usb/asix.c 2007-10-19 20:10:18.000000000 +0400
+++ linux-2.6/drivers/net/usb/asix.c 2007-10-19 20:35:33.000000000 +0400
@@ -568,12 +568,20 @@ static void asix_set_multicast(struct ne
static int asix_mdio_read(struct net_device *netdev, int phy_id, int loc)
{
struct usbnet *dev = netdev_priv(netdev);
+ void *buf;
u16 res;
mutex_lock(&dev->phy_mutex);
asix_set_sw_mii(dev);
+
+ buf = kmalloc(2, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
- (__u16)loc, 2, (u16 *)&res);
+ (__u16)loc, 2, buf);
+ res = *((u16 *)buf);
+ kfree(buf);
+
asix_set_hw_mii(dev);
mutex_unlock(&dev->phy_mutex);
@@ -622,13 +630,22 @@ static void
asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
{
struct usbnet *dev = netdev_priv(net);
+ void *buf;
u8 opt;
- if (asix_read_cmd(dev, AX_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) {
+ buf = kmalloc(1, GFP_KERNEL);
+ if (!buf)
+ return;
+
+ if (asix_read_cmd(dev, AX_CMD_READ_MONITOR_MODE, 0, 0, 1, buf) < 0) {
wolinfo->supported = 0;
wolinfo->wolopts = 0;
+ kfree(buf);
return;
}
+ opt = *((u8 *)buf);
+ kfree(buf);
+
wolinfo->supported = WAKE_PHY | WAKE_MAGIC;
wolinfo->wolopts = 0;
if (opt & AX_MONITOR_MODE) {
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
^ permalink raw reply
* [PATCH 3/3] Use BUILD_BUG_ON in net/core/flowi.c
From: Pavel Emelyanov @ 2007-10-22 15:28 UTC (permalink / raw)
To: David Miller; +Cc: Linux Netdev List, devel
Instead of ugly extern not-existing function.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
---
diff --git a/net/core/flow.c b/net/core/flow.c
index 0ab5234..3ed2b4b 100644
--- a/net/core/flow.c
+++ b/net/core/flow.c
@@ -142,8 +142,6 @@ typedef u64 flow_compare_t;
typedef u32 flow_compare_t;
#endif
-extern void flowi_is_missized(void);
-
/* I hear what you're saying, use memcmp. But memcmp cannot make
* important assumptions that we can here, such as alignment and
* constant size.
@@ -153,8 +151,7 @@ static int flow_key_compare(struct flowi *key1, struct flowi *key2)
flow_compare_t *k1, *k1_lim, *k2;
const int n_elem = sizeof(struct flowi) / sizeof(flow_compare_t);
- if (sizeof(struct flowi) % sizeof(flow_compare_t))
- flowi_is_missized();
+ BUILD_BUG_ON(sizeof(struct flowi) % sizeof(flow_compare_t));
k1 = (flow_compare_t *) key1;
k1_lim = k1 + n_elem;
--
1.5.3.4
^ permalink raw reply related
* [PATCH 2/3] Remove in-code externs for some functions from net/core/dev.c
From: Pavel Emelyanov @ 2007-10-22 15:25 UTC (permalink / raw)
To: David Miller; +Cc: Linux Netdev List, devel
Inconsistent prototype and real type for functions may have
worse consequences, than those for variables, so move them
into a header.
Since they are used privately in net/core, make this file
reside in the same place.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
---
diff --git a/net/core/dev.c b/net/core/dev.c
index 8726589..9ea3665 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -120,6 +120,8 @@
#include <linux/ctype.h>
#include <linux/if_arp.h>
+#include "net-sysfs.h"
+
/*
* The list of packet types we will receive (as opposed to discard)
* and the routines to invoke.
@@ -249,10 +251,6 @@ static RAW_NOTIFIER_HEAD(netdev_chain);
DEFINE_PER_CPU(struct softnet_data, softnet_data);
-extern int netdev_kobject_init(void);
-extern int netdev_register_kobject(struct net_device *);
-extern void netdev_unregister_kobject(struct net_device *);
-
#ifdef CONFIG_DEBUG_LOCK_ALLOC
/*
* register_netdevice() inits dev->_xmit_lock and sets lockdep class
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index 6628e45..61ead1d 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -18,6 +18,8 @@
#include <linux/wireless.h>
#include <net/iw_handler.h>
+#include "net-sysfs.h"
+
#ifdef CONFIG_SYSFS
static const char fmt_hex[] = "%#x\n";
static const char fmt_long_hex[] = "%#lx\n";
diff --git a/net/core/net-sysfs.h b/net/core/net-sysfs.h
new file mode 100644
index 0000000..a41683d
--- /dev/null
+++ b/net/core/net-sysfs.h
@@ -0,0 +1,8 @@
+#ifndef __NET_SYSFS_H__
+#define __NET_SYSFS_H__
+
+int netdev_kobject_init(void);
+int netdev_register_kobject(struct net_device *);
+void netdev_unregister_kobject(struct net_device *);
+
+#endif
--
1.5.3.4
^ permalink raw reply related
* [PATCH 1/3] Don't declare extern variables in net/core/sysctl_net_core.c
From: Pavel Emelyanov @ 2007-10-22 15:22 UTC (permalink / raw)
To: David Miller; +Cc: Linux Netdev List, devel
Some are already declared in include/linux/netdevice.h, while
some others (xfrm ones) need to be declared.
The driver/net/rrunner.c just uses same extern as well, so
cleanup it also.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
---
diff --git a/drivers/net/rrunner.c b/drivers/net/rrunner.c
index 19152f5..b822859 100644
--- a/drivers/net/rrunner.c
+++ b/drivers/net/rrunner.c
@@ -79,12 +79,10 @@ static char version[] __devinitdata = "rrunner.c: v0.50 11/11/2002 Jes Sorensen
*/
/*
- * These are checked at init time to see if they are at least 256KB
- * and increased to 256KB if they are not. This is done to avoid ending
- * up with socket buffers smaller than the MTU size,
+ * sysctl_[wr]mem_max are checked at init time to see if they are at
+ * least 256KB and increased to 256KB if they are not. This is done to
+ * avoid ending up with socket buffers smaller than the MTU size,
*/
-extern __u32 sysctl_wmem_max;
-extern __u32 sysctl_rmem_max;
static int __devinit rr_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index 688f6f5..58dfa82 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -37,6 +37,8 @@
extern struct sock *xfrm_nl;
extern u32 sysctl_xfrm_aevent_etime;
extern u32 sysctl_xfrm_aevent_rseqth;
+extern int sysctl_xfrm_larval_drop;
+extern u32 sysctl_xfrm_acq_expires;
extern struct mutex xfrm_cfg_mutex;
diff --git a/net/core/sysctl_net_core.c b/net/core/sysctl_net_core.c
index 6d5ea97..113cc72 100644
--- a/net/core/sysctl_net_core.c
+++ b/net/core/sysctl_net_core.c
@@ -9,25 +9,12 @@
#include <linux/sysctl.h>
#include <linux/module.h>
#include <linux/socket.h>
+#include <linux/netdevice.h>
#include <net/sock.h>
+#include <net/xfrm.h>
#ifdef CONFIG_SYSCTL
-extern int netdev_max_backlog;
-extern int weight_p;
-
-extern __u32 sysctl_wmem_max;
-extern __u32 sysctl_rmem_max;
-
-extern int sysctl_core_destroy_delay;
-
-#ifdef CONFIG_XFRM
-extern u32 sysctl_xfrm_aevent_etime;
-extern u32 sysctl_xfrm_aevent_rseqth;
-extern int sysctl_xfrm_larval_drop;
-extern u32 sysctl_xfrm_acq_expires;
-#endif
-
ctl_table core_table[] = {
#ifdef CONFIG_NET
{
--
1.5.3.4
^ permalink raw reply related
* Re: appletalk bugs
From: Gabriel C @ 2007-10-22 15:10 UTC (permalink / raw)
To: Nick; +Cc: Linux Kernel Mailing List, Eric W. Biederman, netdev
In-Reply-To: <1193064745.20114.3.camel@stingray>
Nick wrote:
[ restoring CC ]
> Fascinating ... Are you using chooser or NetInfo?
No I don't.
I fact I don't even know why that module got loaded.
> On Mon, 2007-10-22 at 16:19 +0200, Gabriel C wrote:
>> Hi,
>>
>> modprobing appletalk on current git gives a warning in dmesg :
>>
>> [38506.600269] sysctl table check failed: /net/appletalk .3.7 procname does not match binary path procname
>>
>> on rmmod appletalk I get an Oops :
>>
>>
>> [38541.525258] BUG: unable to handle kernel NULL pointer dereference at virtual address 0000000c
>> [38541.525266] printing eip: c011d4f0 *pde = 00000000
>> [38541.525274] Oops: 0000 [#1] PREEMPT SMP
>> [38541.525282] Modules linked in: appletalk psnap llc pc87360 hwmon_vid eeprom adm1021 sr_mod shpchp pci_hotplug iTCO_wdt iTCO_vendor_support intel_agp i82860_edac i2c_i801 edac_core cdrom agpgart 3c59x mii ext4dev jbd2 crc16 loop lp parport_pc parport evdev
>> [38541.525312]
>> [38541.525316] Pid: 28887, comm: rmmod Not tainted (2.6.23-gcfa76f02 #341)
>> [38541.525321] EIP: 0060:[<c011d4f0>] EFLAGS: 00010202 CPU: 0
>> [38541.525334] EIP is at unregister_sysctl_table+0x11/0x70
>> [38541.525339] EAX: 00000001 EBX: e8ef2180 ECX: 00000002 EDX: 00000000
>> [38541.525343] ESI: 00000000 EDI: 00000880 EBP: cc094000 ESP: cc095f38
>> [38541.525347] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
>
>> [38541.525389] Call Trace:
>> [38541.525395] [<e8eed5b1>] atalk_exit+0x5/0x4b [appletalk]
>> [38541.525410] [<c01353b2>] sys_delete_module+0x187/0x1b5
>> [38541.525420] [<c01101fd>] do_page_fault+0x18b/0x51a
>> [38541.525426] [<c0148684>] do_munmap+0x19b/0x1b4
>> [38541.525437] [<c01026fa>] sysenter_past_esp+0x5f/0x85
>
>
>
^ permalink raw reply
* Re: about multiple network interface
From: wit @ 2007-10-22 15:07 UTC (permalink / raw)
To: Evgeniy Polyakov; +Cc: netdev
In-Reply-To: <20071022091410.GB12186@2ka.mipt.ru>
thank you very much..
2007/10/22, Evgeniy Polyakov <johnpol@2ka.mipt.ru>:
> On Mon, Oct 22, 2007 at 10:09:38AM +0800, wit (is01kzh@gmail.com) wrote:
> > But this does work until I add a ifcfg-eth0 in
> > sysconfig/network-script with the following content:
> > DEVICE=eth0
> > ONBOOT=yes
> >
> > What is the relationship between these two files? And sometimes, I see
>
> It depends on your distro - when script calls "modprobe $DEVICE"
> this ends up with modprobe eth0, which will check modprobe.conf.
>
> > this message:
> > Bringing up interface eth0: e100 device does not seem to be present, delaying e
> > th0 initialization.
> > Why??
>
> This is fedora, right? Check you kernel config, scripts and whatever is
> needed to load driver first and only then try to setup an address.
>
> --
> Evgeniy Polyakov
>
^ permalink raw reply
* Re: [PATCH] wan: new driver retina
From: Randy Dunlap @ 2007-10-22 15:02 UTC (permalink / raw)
To: Matti Linnanvuori; +Cc: akpm, jgarzik, netdev
In-Reply-To: <720714.25776.qm@web52011.mail.re2.yahoo.com>
On Mon, 22 Oct 2007 04:14:57 -0700 (PDT) Matti Linnanvuori wrote:
> From: Matti Linnanvuori <mattilinnanvuori@yahoo.com>
>
> Retina G.703 and G.SHDSL driver.
>
> Signed-off-by: Matti Linnanvuori <mattilinnanvuori@yahoo.com>
> ---
Hi,
Just a few basic questions... I'm not reviewing any of the code parts.
> Fixed Kconfig and the body of the explanation.
>
> diff -Napur
> linux-2.6.23/drivers/net/wan/Kconfig
> linux-2.6.24/drivers/net/wan/Kconfig
> --- linux-2.6.23/drivers/net/wan/Kconfig 2007-10-09 23:31:38.000000000 +0300
> +++ linux-2.6.24/drivers/net/wan/Kconfig 2007-10-22 13:54:55.383644167 +0300
> @@ -494,4 +494,15 @@ config SBNI_MULTILINE
>
> If unsure, say N.
>
> +config RETINA
> + tristate "Retina support"
> + depends on m && PCI
> + help
> + Driver for Retina C5400 and E2200 network cards, which
> + support G.703, G.SHDSL, Ethernet encapsulation and PCI.
> +
> + The driver will be compiled as a module: the
> + module will be called retina.
Why is the driver restricted/limited to module only?
> +
> endif # WAN
> diff -Napur linux-2.6.23/drivers/net/wan/retina.c linux-2.6.24/drivers/net/wan/retina.c
> --- linux-2.6.23/drivers/net/wan/retina.c 1970-01-01 02:00:00.000000000 +0200
> +++ linux-2.6.24/drivers/net/wan/retina.c 2007-10-22 12:01:44.856033562 +0300
> @@ -0,0 +1,4503 @@
> +/* V1.2.4 */
> +
> +/* retina.c: */
> +
> +
> +#define DRV_NAME "retina"
> +#define DRV_VERSION "1.2.5"
> +#define DRV_RELDATE "November 14, 2003"
huh?
> +#if !defined(__OPTIMIZE__)
> +#warning You must compile this file with correct options.
> +#warning See the last lines of the source file.
> +#error You have to compile this driver with "-O".
> +#endif
What defines __OPTIMIZE__ in the kernel build environment?
> diff -Napur linux-2.6.23/drivers/net/wan/retina.h linux-2.6.24/drivers/net/wan/retina.h
> --- linux-2.6.23/drivers/net/wan/retina.h 1970-01-01 02:00:00.000000000 +0200
> +++ linux-2.6.24/drivers/net/wan/retina.h 2007-10-22 12:01:44.856033562 +0300
> @@ -0,0 +1,164 @@
> diff -Napur linux-2.6.23/MAINTAINERS linux-2.6.24/MAINTAINERS
> --- linux-2.6.23/MAINTAINERS 2007-10-09 23:31:38.000000000 +0300
> +++ linux-2.6.24/MAINTAINERS 2007-10-22 11:50:13.190983316 +0300
> @@ -3149,6 +3149,11 @@ L: reiserfs-devel@vger.kernel.org
> W: http://www.namesys.com
> S: Supported
>
> +RETINA DRIVER
> +P: Matti Linnanvuori
> +M: mattilinnanvuori@yahoo.com
and what mailing list?
> +S: Supported
> +
> ROCKETPORT DRIVER
> P: Comtrol Corp.
> W: http://www.comtrol.com
---
~Randy
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox