* [PATCH V4 net-next 12/17] net: hns3: add support for set_pauseparam
From: Lipeng @ 2017-12-21 7:28 UTC (permalink / raw)
To: davem; +Cc: netdev, linux-kernel, linuxarm, salil.mehta, lipeng321
In-Reply-To: <1513841343-60964-1-git-send-email-lipeng321@huawei.com>
This patch adds set_pauseparam support for ethtool cmd.
Signed-off-by: Lipeng <lipeng321@huawei.com>
Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
---
drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 13 ++++
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 83 ++++++++++++++++++++++
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 2 +-
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h | 1 +
4 files changed, 98 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
index 2fd2656..b829ec7 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
@@ -559,6 +559,18 @@ static void hns3_get_pauseparam(struct net_device *netdev,
¶m->rx_pause, ¶m->tx_pause);
}
+static int hns3_set_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *param)
+{
+ struct hnae3_handle *h = hns3_get_handle(netdev);
+
+ if (h->ae_algo->ops->set_pauseparam)
+ return h->ae_algo->ops->set_pauseparam(h, param->autoneg,
+ param->rx_pause,
+ param->tx_pause);
+ return -EOPNOTSUPP;
+}
+
static int hns3_get_link_ksettings(struct net_device *netdev,
struct ethtool_link_ksettings *cmd)
{
@@ -880,6 +892,7 @@ void hns3_get_channels(struct net_device *netdev,
.get_ringparam = hns3_get_ringparam,
.set_ringparam = hns3_set_ringparam,
.get_pauseparam = hns3_get_pauseparam,
+ .set_pauseparam = hns3_set_pauseparam,
.get_strings = hns3_get_strings,
.get_ethtool_stats = hns3_get_stats,
.get_sset_count = hns3_get_sset_count,
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 14e1054..0f55ee6 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -4660,6 +4660,53 @@ static u32 hclge_get_fw_version(struct hnae3_handle *handle)
return hdev->fw_version;
}
+static void hclge_set_flowctrl_adv(struct hclge_dev *hdev, u32 rx_en, u32 tx_en)
+{
+ struct phy_device *phydev = hdev->hw.mac.phydev;
+
+ if (!phydev)
+ return;
+
+ phydev->advertising &= ~(ADVERTISED_Pause | ADVERTISED_Asym_Pause);
+
+ if (rx_en)
+ phydev->advertising |= ADVERTISED_Pause | ADVERTISED_Asym_Pause;
+
+ if (tx_en)
+ phydev->advertising ^= ADVERTISED_Asym_Pause;
+}
+
+static int hclge_cfg_pauseparam(struct hclge_dev *hdev, u32 rx_en, u32 tx_en)
+{
+ enum hclge_fc_mode fc_mode;
+ int ret;
+
+ if (rx_en && tx_en)
+ fc_mode = HCLGE_FC_FULL;
+ else if (rx_en && !tx_en)
+ fc_mode = HCLGE_FC_RX_PAUSE;
+ else if (!rx_en && tx_en)
+ fc_mode = HCLGE_FC_TX_PAUSE;
+ else
+ fc_mode = HCLGE_FC_NONE;
+
+ if (hdev->tm_info.fc_mode == HCLGE_FC_PFC) {
+ hdev->fc_mode_last_time = fc_mode;
+ return 0;
+ }
+
+ ret = hclge_mac_pause_en_cfg(hdev, tx_en, rx_en);
+ if (ret) {
+ dev_err(&hdev->pdev->dev, "configure pauseparam error, ret = %d.\n",
+ ret);
+ return ret;
+ }
+
+ hdev->tm_info.fc_mode = fc_mode;
+
+ return 0;
+}
+
static void hclge_get_pauseparam(struct hnae3_handle *handle, u32 *auto_neg,
u32 *rx_en, u32 *tx_en)
{
@@ -4689,6 +4736,41 @@ static void hclge_get_pauseparam(struct hnae3_handle *handle, u32 *auto_neg,
}
}
+static int hclge_set_pauseparam(struct hnae3_handle *handle, u32 auto_neg,
+ u32 rx_en, u32 tx_en)
+{
+ struct hclge_vport *vport = hclge_get_vport(handle);
+ struct hclge_dev *hdev = vport->back;
+ struct phy_device *phydev = hdev->hw.mac.phydev;
+ u32 fc_autoneg;
+
+ /* Only support flow control negotiation for netdev with
+ * phy attached for now.
+ */
+ if (!phydev)
+ return -EOPNOTSUPP;
+
+ fc_autoneg = hclge_get_autoneg(handle);
+ if (auto_neg != fc_autoneg) {
+ dev_info(&hdev->pdev->dev,
+ "To change autoneg please use: ethtool -s <dev> autoneg <on|off>\n");
+ return -EOPNOTSUPP;
+ }
+
+ if (hdev->tm_info.fc_mode == HCLGE_FC_PFC) {
+ dev_info(&hdev->pdev->dev,
+ "Priority flow control enabled. Cannot set link flow control.\n");
+ return -EOPNOTSUPP;
+ }
+
+ hclge_set_flowctrl_adv(hdev, rx_en, tx_en);
+
+ if (!fc_autoneg)
+ return hclge_cfg_pauseparam(hdev, rx_en, tx_en);
+
+ return phy_start_aneg(phydev);
+}
+
static void hclge_get_ksettings_an_result(struct hnae3_handle *handle,
u8 *auto_neg, u32 *speed, u8 *duplex)
{
@@ -5344,6 +5426,7 @@ static int hclge_set_channels(struct hnae3_handle *handle, u32 new_tqps_num)
.set_autoneg = hclge_set_autoneg,
.get_autoneg = hclge_get_autoneg,
.get_pauseparam = hclge_get_pauseparam,
+ .set_pauseparam = hclge_set_pauseparam,
.set_mtu = hclge_set_mtu,
.reset_queue = hclge_reset_tqp,
.get_stats = hclge_get_stats,
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
index 7bfa2e5..7cfe1eb 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
@@ -112,7 +112,7 @@ static int hclge_shaper_para_calc(u32 ir, u8 shaper_level,
return 0;
}
-static int hclge_mac_pause_en_cfg(struct hclge_dev *hdev, bool tx, bool rx)
+int hclge_mac_pause_en_cfg(struct hclge_dev *hdev, bool tx, bool rx)
{
struct hclge_desc desc;
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h
index bf59961..16f4139 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h
@@ -118,4 +118,5 @@ struct hclge_port_shapping_cmd {
int hclge_tm_dwrr_cfg(struct hclge_dev *hdev);
int hclge_tm_map_cfg(struct hclge_dev *hdev);
int hclge_tm_init_hw(struct hclge_dev *hdev);
+int hclge_mac_pause_en_cfg(struct hclge_dev *hdev, bool tx, bool rx);
#endif
--
1.9.1
^ permalink raw reply related
* [PATCH V4 net-next 14/17] net: hns3: add Asym Pause support to phy default features
From: Lipeng @ 2017-12-21 7:29 UTC (permalink / raw)
To: davem; +Cc: netdev, linux-kernel, linuxarm, salil.mehta, lipeng321
In-Reply-To: <1513841343-60964-1-git-send-email-lipeng321@huawei.com>
From: Fuyun Liang <liangfuyun1@huawei.com>
commit c4fb2cdf575d ("net: hns3: fix a bug for phy supported feature
initialization") adds default supported features for phy, but our hardware
also supports Asym Pause. This patch adds Asym Pause support to phy
default features to prevent Asym Pause can not be advertised when the phy
negotiates flow control.
Fixes: c4fb2cdf575d ("net: hns3: fix a bug for phy supported feature initialization")
Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Lipeng <lipeng321@huawei.com>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
index 3745153..c1dea3a 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
@@ -17,6 +17,7 @@
#define HCLGE_PHY_SUPPORTED_FEATURES (SUPPORTED_Autoneg | \
SUPPORTED_TP | \
SUPPORTED_Pause | \
+ SUPPORTED_Asym_Pause | \
PHY_10BT_FEATURES | \
PHY_100BT_FEATURES | \
PHY_1000BT_FEATURES)
--
1.9.1
^ permalink raw reply related
* [PATCH V4 net-next 07/17] net: hns3: add vlan offload config command
From: Lipeng @ 2017-12-21 7:28 UTC (permalink / raw)
To: davem; +Cc: netdev, linux-kernel, linuxarm, salil.mehta, lipeng321
In-Reply-To: <1513841343-60964-1-git-send-email-lipeng321@huawei.com>
This patch adds vlan offload config commands, initializes
the rules of tx/rx vlan tag handle for hw.
Signed-off-by: Lipeng <lipeng321@huawei.com>
Signed-off-by: Jian Shen <shenjian15@huawei.com>
---
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 45 ++++++
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 158 ++++++++++++++++++++-
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 36 +++++
3 files changed, 233 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
index 10adf86..f5baba21 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
@@ -180,6 +180,10 @@ enum hclge_opcode_type {
/* Promisuous mode command */
HCLGE_OPC_CFG_PROMISC_MODE = 0x0E01,
+ /* Vlan offload command */
+ HCLGE_OPC_VLAN_PORT_TX_CFG = 0x0F01,
+ HCLGE_OPC_VLAN_PORT_RX_CFG = 0x0F02,
+
/* Interrupts cmd */
HCLGE_OPC_ADD_RING_TO_VECTOR = 0x1503,
HCLGE_OPC_DEL_RING_TO_VECTOR = 0x1504,
@@ -670,6 +674,47 @@ struct hclge_vlan_filter_vf_cfg_cmd {
u8 vf_bitmap[16];
};
+#define HCLGE_ACCEPT_TAG_B 0
+#define HCLGE_ACCEPT_UNTAG_B 1
+#define HCLGE_PORT_INS_TAG1_EN_B 2
+#define HCLGE_PORT_INS_TAG2_EN_B 3
+#define HCLGE_CFG_NIC_ROCE_SEL_B 4
+struct hclge_vport_vtag_tx_cfg_cmd {
+ u8 vport_vlan_cfg;
+ u8 vf_offset;
+ u8 rsv1[2];
+ __le16 def_vlan_tag1;
+ __le16 def_vlan_tag2;
+ u8 vf_bitmap[8];
+ u8 rsv2[8];
+};
+
+#define HCLGE_REM_TAG1_EN_B 0
+#define HCLGE_REM_TAG2_EN_B 1
+#define HCLGE_SHOW_TAG1_EN_B 2
+#define HCLGE_SHOW_TAG2_EN_B 3
+struct hclge_vport_vtag_rx_cfg_cmd {
+ u8 vport_vlan_cfg;
+ u8 vf_offset;
+ u8 rsv1[6];
+ u8 vf_bitmap[8];
+ u8 rsv2[8];
+};
+
+struct hclge_tx_vlan_type_cfg_cmd {
+ __le16 ot_vlan_type;
+ __le16 in_vlan_type;
+ u8 rsv[20];
+};
+
+struct hclge_rx_vlan_type_cfg_cmd {
+ __le16 ot_fst_vlan_type;
+ __le16 ot_sec_vlan_type;
+ __le16 in_fst_vlan_type;
+ __le16 in_sec_vlan_type;
+ u8 rsv[16];
+};
+
struct hclge_cfg_com_tqp_queue_cmd {
__le16 tqp_id;
__le16 stream_id;
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index a1d9398..113b859 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -4380,23 +4380,169 @@ static int hclge_set_vf_vlan_filter(struct hnae3_handle *handle, int vfid,
return hclge_set_vf_vlan_common(hdev, vfid, false, vlan, qos, proto);
}
+static int hclge_set_vlan_tx_offload_cfg(struct hclge_vport *vport)
+{
+ struct hclge_tx_vtag_cfg *vcfg = &vport->txvlan_cfg;
+ struct hclge_vport_vtag_tx_cfg_cmd *req;
+ struct hclge_dev *hdev = vport->back;
+ struct hclge_desc desc;
+ int status;
+
+ hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_VLAN_PORT_TX_CFG, false);
+
+ req = (struct hclge_vport_vtag_tx_cfg_cmd *)desc.data;
+ req->def_vlan_tag1 = cpu_to_le16(vcfg->default_tag1);
+ req->def_vlan_tag2 = cpu_to_le16(vcfg->default_tag2);
+ hnae_set_bit(req->vport_vlan_cfg, HCLGE_ACCEPT_TAG_B,
+ vcfg->accept_tag ? 1 : 0);
+ hnae_set_bit(req->vport_vlan_cfg, HCLGE_ACCEPT_UNTAG_B,
+ vcfg->accept_untag ? 1 : 0);
+ hnae_set_bit(req->vport_vlan_cfg, HCLGE_PORT_INS_TAG1_EN_B,
+ vcfg->insert_tag1_en ? 1 : 0);
+ hnae_set_bit(req->vport_vlan_cfg, HCLGE_PORT_INS_TAG2_EN_B,
+ vcfg->insert_tag2_en ? 1 : 0);
+ hnae_set_bit(req->vport_vlan_cfg, HCLGE_CFG_NIC_ROCE_SEL_B, 0);
+
+ req->vf_offset = vport->vport_id / HCLGE_VF_NUM_PER_CMD;
+ req->vf_bitmap[req->vf_offset] =
+ 1 << (vport->vport_id % HCLGE_VF_NUM_PER_BYTE);
+
+ status = hclge_cmd_send(&hdev->hw, &desc, 1);
+ if (status)
+ dev_err(&hdev->pdev->dev,
+ "Send port txvlan cfg command fail, ret =%d\n",
+ status);
+
+ return status;
+}
+
+static int hclge_set_vlan_rx_offload_cfg(struct hclge_vport *vport)
+{
+ struct hclge_rx_vtag_cfg *vcfg = &vport->rxvlan_cfg;
+ struct hclge_vport_vtag_rx_cfg_cmd *req;
+ struct hclge_dev *hdev = vport->back;
+ struct hclge_desc desc;
+ int status;
+
+ hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_VLAN_PORT_RX_CFG, false);
+
+ req = (struct hclge_vport_vtag_rx_cfg_cmd *)desc.data;
+ hnae_set_bit(req->vport_vlan_cfg, HCLGE_REM_TAG1_EN_B,
+ vcfg->strip_tag1_en ? 1 : 0);
+ hnae_set_bit(req->vport_vlan_cfg, HCLGE_REM_TAG2_EN_B,
+ vcfg->strip_tag2_en ? 1 : 0);
+ hnae_set_bit(req->vport_vlan_cfg, HCLGE_SHOW_TAG1_EN_B,
+ vcfg->vlan1_vlan_prionly ? 1 : 0);
+ hnae_set_bit(req->vport_vlan_cfg, HCLGE_SHOW_TAG2_EN_B,
+ vcfg->vlan2_vlan_prionly ? 1 : 0);
+
+ req->vf_offset = vport->vport_id / HCLGE_VF_NUM_PER_CMD;
+ req->vf_bitmap[req->vf_offset] =
+ 1 << (vport->vport_id % HCLGE_VF_NUM_PER_BYTE);
+
+ status = hclge_cmd_send(&hdev->hw, &desc, 1);
+ if (status)
+ dev_err(&hdev->pdev->dev,
+ "Send port rxvlan cfg command fail, ret =%d\n",
+ status);
+
+ return status;
+}
+
+static int hclge_set_vlan_protocol_type(struct hclge_dev *hdev)
+{
+ struct hclge_rx_vlan_type_cfg_cmd *rx_req;
+ struct hclge_tx_vlan_type_cfg_cmd *tx_req;
+ struct hclge_desc desc;
+ int status;
+
+ hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_MAC_VLAN_TYPE_ID, false);
+ rx_req = (struct hclge_rx_vlan_type_cfg_cmd *)desc.data;
+ rx_req->ot_fst_vlan_type =
+ cpu_to_le16(hdev->vlan_type_cfg.rx_ot_fst_vlan_type);
+ rx_req->ot_sec_vlan_type =
+ cpu_to_le16(hdev->vlan_type_cfg.rx_ot_sec_vlan_type);
+ rx_req->in_fst_vlan_type =
+ cpu_to_le16(hdev->vlan_type_cfg.rx_in_fst_vlan_type);
+ rx_req->in_sec_vlan_type =
+ cpu_to_le16(hdev->vlan_type_cfg.rx_in_sec_vlan_type);
+
+ status = hclge_cmd_send(&hdev->hw, &desc, 1);
+ if (status) {
+ dev_err(&hdev->pdev->dev,
+ "Send rxvlan protocol type command fail, ret =%d\n",
+ status);
+ return status;
+ }
+
+ hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_MAC_VLAN_INSERT, false);
+
+ tx_req = (struct hclge_tx_vlan_type_cfg_cmd *)&desc.data;
+ tx_req->ot_vlan_type = cpu_to_le16(hdev->vlan_type_cfg.tx_ot_vlan_type);
+ tx_req->in_vlan_type = cpu_to_le16(hdev->vlan_type_cfg.tx_in_vlan_type);
+
+ status = hclge_cmd_send(&hdev->hw, &desc, 1);
+ if (status)
+ dev_err(&hdev->pdev->dev,
+ "Send txvlan protocol type command fail, ret =%d\n",
+ status);
+
+ return status;
+}
+
static int hclge_init_vlan_config(struct hclge_dev *hdev)
{
-#define HCLGE_VLAN_TYPE_VF_TABLE 0
-#define HCLGE_VLAN_TYPE_PORT_TABLE 1
+#define HCLGE_FILTER_TYPE_VF 0
+#define HCLGE_FILTER_TYPE_PORT 1
+#define HCLGE_DEF_VLAN_TYPE 0x8100
+
struct hnae3_handle *handle;
+ struct hclge_vport *vport;
int ret;
+ int i;
+
+ ret = hclge_set_vlan_filter_ctrl(hdev, HCLGE_FILTER_TYPE_VF, true);
+ if (ret)
+ return ret;
- ret = hclge_set_vlan_filter_ctrl(hdev, HCLGE_VLAN_TYPE_VF_TABLE,
- true);
+ ret = hclge_set_vlan_filter_ctrl(hdev, HCLGE_FILTER_TYPE_PORT, true);
if (ret)
return ret;
- ret = hclge_set_vlan_filter_ctrl(hdev, HCLGE_VLAN_TYPE_PORT_TABLE,
- true);
+ hdev->vlan_type_cfg.rx_in_fst_vlan_type = HCLGE_DEF_VLAN_TYPE;
+ hdev->vlan_type_cfg.rx_in_sec_vlan_type = HCLGE_DEF_VLAN_TYPE;
+ hdev->vlan_type_cfg.rx_ot_fst_vlan_type = HCLGE_DEF_VLAN_TYPE;
+ hdev->vlan_type_cfg.rx_ot_sec_vlan_type = HCLGE_DEF_VLAN_TYPE;
+ hdev->vlan_type_cfg.tx_ot_vlan_type = HCLGE_DEF_VLAN_TYPE;
+ hdev->vlan_type_cfg.tx_in_vlan_type = HCLGE_DEF_VLAN_TYPE;
+
+ ret = hclge_set_vlan_protocol_type(hdev);
if (ret)
return ret;
+ for (i = 0; i < hdev->num_alloc_vport; i++) {
+ vport = &hdev->vport[i];
+ vport->txvlan_cfg.accept_tag = true;
+ vport->txvlan_cfg.accept_untag = true;
+ vport->txvlan_cfg.insert_tag1_en = false;
+ vport->txvlan_cfg.insert_tag2_en = false;
+ vport->txvlan_cfg.default_tag1 = 0;
+ vport->txvlan_cfg.default_tag2 = 0;
+
+ ret = hclge_set_vlan_tx_offload_cfg(vport);
+ if (ret)
+ return ret;
+
+ vport->rxvlan_cfg.strip_tag1_en = false;
+ vport->rxvlan_cfg.strip_tag2_en = true;
+ vport->rxvlan_cfg.vlan1_vlan_prionly = false;
+ vport->rxvlan_cfg.vlan2_vlan_prionly = false;
+
+ ret = hclge_set_vlan_rx_offload_cfg(vport);
+ if (ret)
+ return ret;
+ }
+
handle = &hdev->vport[0].nic;
return hclge_set_port_vlan_filter(handle, htons(ETH_P_8021Q), 0, false);
}
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
index 4858909..cda520c 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
@@ -79,6 +79,10 @@
#define HCLGE_PHY_MDIX_STATUS_B (6)
#define HCLGE_PHY_SPEED_DUP_RESOLVE_B (11)
+/* Factor used to calculate offset and bitmap of VF num */
+#define HCLGE_VF_NUM_PER_CMD 64
+#define HCLGE_VF_NUM_PER_BYTE 8
+
/* Reset related Registers */
#define HCLGE_MISC_RESET_STS_REG 0x20700
#define HCLGE_GLOBAL_RESET_REG 0x20A00
@@ -424,6 +428,15 @@ struct hclge_hw_stats {
struct hclge_32_bit_stats all_32_bit_stats;
};
+struct hclge_vlan_type_cfg {
+ u16 rx_ot_fst_vlan_type;
+ u16 rx_ot_sec_vlan_type;
+ u16 rx_in_fst_vlan_type;
+ u16 rx_in_sec_vlan_type;
+ u16 tx_ot_vlan_type;
+ u16 tx_in_vlan_type;
+};
+
struct hclge_dev {
struct pci_dev *pdev;
struct hnae3_ae_dev *ae_dev;
@@ -510,6 +523,26 @@ struct hclge_dev {
enum hclge_mta_dmac_sel_type mta_mac_sel_type;
bool enable_mta; /* Mutilcast filter enable */
bool accept_mta_mc; /* Whether accept mta filter multicast */
+
+ struct hclge_vlan_type_cfg vlan_type_cfg;
+};
+
+/* VPort level vlan tag configuration for TX direction */
+struct hclge_tx_vtag_cfg {
+ bool accept_tag; /* Whether accept tagged packet from host */
+ bool accept_untag; /* Whether accept untagged packet from host */
+ bool insert_tag1_en; /* Whether insert inner vlan tag */
+ bool insert_tag2_en; /* Whether insert outer vlan tag */
+ u16 default_tag1; /* The default inner vlan tag to insert */
+ u16 default_tag2; /* The default outer vlan tag to insert */
+};
+
+/* VPort level vlan tag configuration for RX direction */
+struct hclge_rx_vtag_cfg {
+ bool strip_tag1_en; /* Whether strip inner vlan tag */
+ bool strip_tag2_en; /* Whether strip outer vlan tag */
+ bool vlan1_vlan_prionly;/* Inner VLAN Tag up to descriptor Enable */
+ bool vlan2_vlan_prionly;/* Outer VLAN Tag up to descriptor Enable */
};
struct hclge_vport {
@@ -524,6 +557,9 @@ struct hclge_vport {
u16 bw_limit; /* VSI BW Limit (0 = disabled) */
u8 dwrr;
+ struct hclge_tx_vtag_cfg txvlan_cfg;
+ struct hclge_rx_vtag_cfg rxvlan_cfg;
+
int vport_id;
struct hclge_dev *back; /* Back reference to associated dev */
struct hnae3_handle nic;
--
1.9.1
^ permalink raw reply related
* [PATCH V4 net-next 02/17] net: hns3: add support to modify tqps number
From: Lipeng @ 2017-12-21 7:28 UTC (permalink / raw)
To: davem; +Cc: netdev, linux-kernel, linuxarm, salil.mehta, lipeng321
In-Reply-To: <1513841343-60964-1-git-send-email-lipeng321@huawei.com>
This patch adds the support to change tqps number for PF driver
by using ehtool -L command.
Signed-off-by: Lipeng <lipeng321@huawei.com>
Signed-off-by: Mingguang Qu <qumingguang@huawei.com>
---
drivers/net/ethernet/hisilicon/hns3/hnae3.h | 3 +
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 122 +++++++++++++++++++++
drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 2 +
drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 1 +
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 112 +++++++++++++++++++
5 files changed, 240 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
index d887721..a5d3d22 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
@@ -388,6 +388,9 @@ struct hnae3_ae_ops {
enum hnae3_reset_type reset);
void (*get_channels)(struct hnae3_handle *handle,
struct ethtool_channels *ch);
+ void (*get_tqps_and_rss_info)(struct hnae3_handle *h,
+ u16 *free_tqps, u16 *max_rss_size);
+ int (*set_channels)(struct hnae3_handle *handle, u32 new_tqps_num);
};
struct hnae3_dcb_ops {
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index c2c1323..7e92068 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -2651,6 +2651,19 @@ static int hns3_get_ring_config(struct hns3_nic_priv *priv)
return ret;
}
+static void hns3_put_ring_config(struct hns3_nic_priv *priv)
+{
+ struct hnae3_handle *h = priv->ae_handle;
+ int i;
+
+ for (i = 0; i < h->kinfo.num_tqps; i++) {
+ devm_kfree(priv->dev, priv->ring_data[i].ring);
+ devm_kfree(priv->dev,
+ priv->ring_data[i + h->kinfo.num_tqps].ring);
+ }
+ devm_kfree(priv->dev, priv->ring_data);
+}
+
static int hns3_alloc_ring_memory(struct hns3_enet_ring *ring)
{
int ret;
@@ -3162,6 +3175,115 @@ static int hns3_reset_notify(struct hnae3_handle *handle,
return ret;
}
+static u16 hns3_get_max_available_channels(struct net_device *netdev)
+{
+ struct hnae3_handle *h = hns3_get_handle(netdev);
+ u16 free_tqps, max_rss_size, max_tqps;
+
+ h->ae_algo->ops->get_tqps_and_rss_info(h, &free_tqps, &max_rss_size);
+ max_tqps = h->kinfo.num_tc * max_rss_size;
+
+ return min_t(u16, max_tqps, (free_tqps + h->kinfo.num_tqps));
+}
+
+static int hns3_modify_tqp_num(struct net_device *netdev, u16 new_tqp_num)
+{
+ struct hns3_nic_priv *priv = netdev_priv(netdev);
+ struct hnae3_handle *h = hns3_get_handle(netdev);
+ int ret;
+
+ ret = h->ae_algo->ops->set_channels(h, new_tqp_num);
+ if (ret)
+ return ret;
+
+ ret = hns3_get_ring_config(priv);
+ if (ret)
+ return ret;
+
+ ret = hns3_nic_init_vector_data(priv);
+ if (ret)
+ goto err_uninit_vector;
+
+ ret = hns3_init_all_ring(priv);
+ if (ret)
+ goto err_put_ring;
+
+ return 0;
+
+err_put_ring:
+ hns3_put_ring_config(priv);
+err_uninit_vector:
+ hns3_nic_uninit_vector_data(priv);
+ return ret;
+}
+
+static int hns3_adjust_tqps_num(u8 num_tc, u32 new_tqp_num)
+{
+ return (new_tqp_num / num_tc) * num_tc;
+}
+
+int hns3_set_channels(struct net_device *netdev,
+ struct ethtool_channels *ch)
+{
+ struct hns3_nic_priv *priv = netdev_priv(netdev);
+ struct hnae3_handle *h = hns3_get_handle(netdev);
+ struct hnae3_knic_private_info *kinfo = &h->kinfo;
+ bool if_running = netif_running(netdev);
+ u32 new_tqp_num = ch->combined_count;
+ u16 org_tqp_num;
+ int ret;
+
+ if (ch->rx_count || ch->tx_count)
+ return -EINVAL;
+
+ if (new_tqp_num > hns3_get_max_available_channels(netdev) ||
+ new_tqp_num < kinfo->num_tc) {
+ dev_err(&netdev->dev,
+ "Change tqps fail, the tqp range is from %d to %d",
+ kinfo->num_tc,
+ hns3_get_max_available_channels(netdev));
+ return -EINVAL;
+ }
+
+ new_tqp_num = hns3_adjust_tqps_num(kinfo->num_tc, new_tqp_num);
+ if (kinfo->num_tqps == new_tqp_num)
+ return 0;
+
+ if (if_running)
+ dev_close(netdev);
+
+ hns3_clear_all_ring(h);
+
+ ret = hns3_nic_uninit_vector_data(priv);
+ if (ret) {
+ dev_err(&netdev->dev,
+ "Unbind vector with tqp fail, nothing is changed");
+ goto open_netdev;
+ }
+
+ hns3_uninit_all_ring(priv);
+
+ org_tqp_num = h->kinfo.num_tqps;
+ ret = hns3_modify_tqp_num(netdev, new_tqp_num);
+ if (ret) {
+ ret = hns3_modify_tqp_num(netdev, org_tqp_num);
+ if (ret) {
+ /* If revert to old tqp failed, fatal error occurred */
+ dev_err(&netdev->dev,
+ "Revert to old tqp num fail, ret=%d", ret);
+ return ret;
+ }
+ dev_info(&netdev->dev,
+ "Change tqp num fail, Revert to old tqp num");
+ }
+
+open_netdev:
+ if (if_running)
+ dev_open(netdev);
+
+ return ret;
+}
+
static const struct hnae3_client_ops client_ops = {
.init_instance = hns3_client_init,
.uninit_instance = hns3_client_uninit,
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
index 8a9de75..a2a7ea3 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
@@ -595,6 +595,8 @@ static inline void hns3_write_reg(void __iomem *base, u32 reg, u32 value)
(((struct hns3_nic_priv *)netdev_priv(ndev))->ae_handle)
void hns3_ethtool_set_ops(struct net_device *netdev);
+int hns3_set_channels(struct net_device *netdev,
+ struct ethtool_channels *ch);
bool hns3_clean_tx_ring(struct hns3_enet_ring *ring, int budget);
int hns3_init_all_ring(struct hns3_nic_priv *priv);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
index 23af36c..1b2d79b 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
@@ -893,6 +893,7 @@ void hns3_get_channels(struct net_device *netdev,
.set_link_ksettings = hns3_set_link_ksettings,
.nway_reset = hns3_nway_reset,
.get_channels = hns3_get_channels,
+ .set_channels = hns3_set_channels,
};
void hns3_ethtool_set_ops(struct net_device *netdev)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index a3101bc..7fab102 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -5022,6 +5022,116 @@ static void hclge_get_channels(struct hnae3_handle *handle,
ch->combined_count = vport->alloc_tqps;
}
+static void hclge_get_tqps_and_rss_info(struct hnae3_handle *handle,
+ u16 *free_tqps, u16 *max_rss_size)
+{
+ struct hclge_vport *vport = hclge_get_vport(handle);
+ struct hclge_dev *hdev = vport->back;
+ u16 temp_tqps = 0;
+ int i;
+
+ for (i = 0; i < hdev->num_tqps; i++) {
+ if (!hdev->htqp[i].alloced)
+ temp_tqps++;
+ }
+ *free_tqps = temp_tqps;
+ *max_rss_size = hdev->rss_size_max;
+}
+
+static void hclge_release_tqp(struct hclge_vport *vport)
+{
+ struct hnae3_knic_private_info *kinfo = &vport->nic.kinfo;
+ struct hclge_dev *hdev = vport->back;
+ int i;
+
+ for (i = 0; i < kinfo->num_tqps; i++) {
+ struct hclge_tqp *tqp =
+ container_of(kinfo->tqp[i], struct hclge_tqp, q);
+
+ tqp->q.handle = NULL;
+ tqp->q.tqp_index = 0;
+ tqp->alloced = false;
+ }
+
+ devm_kfree(&hdev->pdev->dev, kinfo->tqp);
+ kinfo->tqp = NULL;
+}
+
+static int hclge_set_channels(struct hnae3_handle *handle, u32 new_tqps_num)
+{
+ struct hclge_vport *vport = hclge_get_vport(handle);
+ struct hnae3_knic_private_info *kinfo = &vport->nic.kinfo;
+ struct hclge_dev *hdev = vport->back;
+ int cur_rss_size = kinfo->rss_size;
+ int cur_tqps = kinfo->num_tqps;
+ u16 tc_offset[HCLGE_MAX_TC_NUM];
+ u16 tc_valid[HCLGE_MAX_TC_NUM];
+ u16 tc_size[HCLGE_MAX_TC_NUM];
+ u16 roundup_size;
+ u32 *rss_indir;
+ int ret, i;
+
+ hclge_release_tqp(vport);
+
+ ret = hclge_knic_setup(vport, new_tqps_num);
+ if (ret) {
+ dev_err(&hdev->pdev->dev, "setup nic fail, ret =%d\n", ret);
+ return ret;
+ }
+
+ ret = hclge_map_tqp_to_vport(hdev, vport);
+ if (ret) {
+ dev_err(&hdev->pdev->dev, "map vport tqp fail, ret =%d\n", ret);
+ return ret;
+ }
+
+ ret = hclge_tm_schd_init(hdev);
+ if (ret) {
+ dev_err(&hdev->pdev->dev, "tm schd init fail, ret =%d\n", ret);
+ return ret;
+ }
+
+ roundup_size = roundup_pow_of_two(kinfo->rss_size);
+ roundup_size = ilog2(roundup_size);
+ /* Set the RSS TC mode according to the new RSS size */
+ for (i = 0; i < HCLGE_MAX_TC_NUM; i++) {
+ tc_valid[i] = 0;
+
+ if (!(hdev->hw_tc_map & BIT(i)))
+ continue;
+
+ tc_valid[i] = 1;
+ tc_size[i] = roundup_size;
+ tc_offset[i] = kinfo->rss_size * i;
+ }
+ ret = hclge_set_rss_tc_mode(hdev, tc_valid, tc_size, tc_offset);
+ if (ret)
+ return ret;
+
+ /* Reinitializes the rss indirect table according to the new RSS size */
+ rss_indir = kcalloc(HCLGE_RSS_IND_TBL_SIZE, sizeof(u32), GFP_KERNEL);
+ if (!rss_indir)
+ return -ENOMEM;
+
+ for (i = 0; i < HCLGE_RSS_IND_TBL_SIZE; i++)
+ rss_indir[i] = i % kinfo->rss_size;
+
+ ret = hclge_set_rss(handle, rss_indir, NULL, 0);
+ if (ret)
+ dev_err(&hdev->pdev->dev, "set rss indir table fail, ret=%d\n",
+ ret);
+
+ kfree(rss_indir);
+
+ if (!ret)
+ dev_info(&hdev->pdev->dev,
+ "Channels changed, rss_size from %d to %d, tqps from %d to %d",
+ cur_rss_size, kinfo->rss_size,
+ cur_tqps, kinfo->rss_size * kinfo->num_tc);
+
+ return ret;
+}
+
static const struct hnae3_ae_ops hclge_ops = {
.init_ae_dev = hclge_init_ae_dev,
.uninit_ae_dev = hclge_uninit_ae_dev,
@@ -5066,6 +5176,8 @@ static void hclge_get_channels(struct hnae3_handle *handle,
.set_vlan_filter = hclge_set_port_vlan_filter,
.set_vf_vlan_filter = hclge_set_vf_vlan_filter,
.reset_event = hclge_reset_event,
+ .get_tqps_and_rss_info = hclge_get_tqps_and_rss_info,
+ .set_channels = hclge_set_channels,
.get_channels = hclge_get_channels,
};
--
1.9.1
^ permalink raw reply related
* [PATCH V4 net-next 01/17] net: hns3: add support to query tqps number
From: Lipeng @ 2017-12-21 7:28 UTC (permalink / raw)
To: davem; +Cc: netdev, linux-kernel, linuxarm, salil.mehta, lipeng321
In-Reply-To: <1513841343-60964-1-git-send-email-lipeng321@huawei.com>
This patch adds the support to query tqps number for PF driver
by using ehtool -l command.
Signed-off-by: Lipeng <lipeng321@huawei.com>
Signed-off-by: Mingguang Qu <qumingguang@huawei.com>
---
drivers/net/ethernet/hisilicon/hns3/hnae3.h | 2 ++
drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 10 ++++++++++
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 21 +++++++++++++++++++++
3 files changed, 33 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
index a9e2b32..d887721 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
@@ -386,6 +386,8 @@ struct hnae3_ae_ops {
u16 vlan, u8 qos, __be16 proto);
void (*reset_event)(struct hnae3_handle *handle,
enum hnae3_reset_type reset);
+ void (*get_channels)(struct hnae3_handle *handle,
+ struct ethtool_channels *ch);
};
struct hnae3_dcb_ops {
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
index 65a69b4..23af36c 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
@@ -849,6 +849,15 @@ static int hns3_nway_reset(struct net_device *netdev)
return genphy_restart_aneg(phy);
}
+void hns3_get_channels(struct net_device *netdev,
+ struct ethtool_channels *ch)
+{
+ struct hnae3_handle *h = hns3_get_handle(netdev);
+
+ if (h->ae_algo->ops->get_channels)
+ h->ae_algo->ops->get_channels(h, ch);
+}
+
static const struct ethtool_ops hns3vf_ethtool_ops = {
.get_drvinfo = hns3_get_drvinfo,
.get_ringparam = hns3_get_ringparam,
@@ -883,6 +892,7 @@ static int hns3_nway_reset(struct net_device *netdev)
.get_link_ksettings = hns3_get_link_ksettings,
.set_link_ksettings = hns3_set_link_ksettings,
.nway_reset = hns3_nway_reset,
+ .get_channels = hns3_get_channels,
};
void hns3_ethtool_set_ops(struct net_device *netdev)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index e97fd66..a3101bc 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -5002,6 +5002,26 @@ static void hclge_uninit_ae_dev(struct hnae3_ae_dev *ae_dev)
ae_dev->priv = NULL;
}
+static u32 hclge_get_max_channels(struct hnae3_handle *handle)
+{
+ struct hnae3_knic_private_info *kinfo = &handle->kinfo;
+ struct hclge_vport *vport = hclge_get_vport(handle);
+ struct hclge_dev *hdev = vport->back;
+
+ return min_t(u32, hdev->rss_size_max * kinfo->num_tc, hdev->num_tqps);
+}
+
+static void hclge_get_channels(struct hnae3_handle *handle,
+ struct ethtool_channels *ch)
+{
+ struct hclge_vport *vport = hclge_get_vport(handle);
+
+ ch->max_combined = hclge_get_max_channels(handle);
+ ch->other_count = 1;
+ ch->max_other = 1;
+ ch->combined_count = vport->alloc_tqps;
+}
+
static const struct hnae3_ae_ops hclge_ops = {
.init_ae_dev = hclge_init_ae_dev,
.uninit_ae_dev = hclge_uninit_ae_dev,
@@ -5046,6 +5066,7 @@ static void hclge_uninit_ae_dev(struct hnae3_ae_dev *ae_dev)
.set_vlan_filter = hclge_set_port_vlan_filter,
.set_vf_vlan_filter = hclge_set_vf_vlan_filter,
.reset_event = hclge_reset_event,
+ .get_channels = hclge_get_channels,
};
static struct hnae3_ae_algo ae_algo = {
--
1.9.1
^ permalink raw reply related
* Re: [Intel-wired-lan] [PATCH] e1000e: Fix e1000_check_for_copper_link_ich8lan return value.
From: Neftin, Sasha @ 2017-12-21 6:57 UTC (permalink / raw)
To: Benjamin Poirier, Jeff Kirsher
Cc: Ben Hutchings, Gabriel C, netdev, Christian Hesse, stable,
linux-kernel, intel-wired-lan
In-Reply-To: <20171211072640.7935-1-bpoirier@suse.com>
On 11/12/2017 9:26, Benjamin Poirier wrote:
> e1000e_check_for_copper_link() and e1000_check_for_copper_link_ich8lan()
> are the two functions that may be assigned to mac.ops.check_for_link when
> phy.media_type == e1000_media_type_copper. Commit 19110cfbb34d ("e1000e:
> Separate signaling for link check/link up") changed the meaning of the
> return value of check_for_link for copper media but only adjusted the first
> function. This patch adjusts the second function likewise.
>
> Reported-by: Christian Hesse <list@eworm.de>
> Reported-by: Gabriel C <nix.or.die@gmail.com>
> Link: https://bugzilla.kernel.org/show_bug.cgi?id=198047
> Fixes: 19110cfbb34d ("e1000e: Separate signaling for link check/link up")
> Tested-by: Christian Hesse <list@eworm.de>
> Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
> ---
> drivers/net/ethernet/intel/e1000e/ich8lan.c | 11 ++++++++---
> 1 file changed, 8 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
> index d6d4ed7acf03..31277d3bb7dc 100644
> --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
> +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
> @@ -1367,6 +1367,9 @@ static s32 e1000_disable_ulp_lpt_lp(struct e1000_hw *hw, bool force)
> * Checks to see of the link status of the hardware has changed. If a
> * change in link status has been detected, then we read the PHY registers
> * to get the current speed/duplex if link exists.
> + *
> + * Returns a negative error code (-E1000_ERR_*) or 0 (link down) or 1 (link
> + * up).
> **/
> static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
> {
> @@ -1382,7 +1385,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
> * Change or Rx Sequence Error interrupt.
> */
> if (!mac->get_link_status)
> - return 0;
> + return 1;
>
> /* First we want to see if the MII Status Register reports
> * link. If so, then we want to get the current speed/duplex
> @@ -1613,10 +1616,12 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
> * different link partner.
> */
> ret_val = e1000e_config_fc_after_link_up(hw);
> - if (ret_val)
> + if (ret_val) {
> e_dbg("Error configuring flow control\n");
> + return ret_val;
> + }
>
> - return ret_val;
> + return 1;
> }
>
> static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
Acked by sasha.neftin@intel.com
^ permalink raw reply
* Re: [PATCH V3 net-next 00/17] add some features and fix some bugs for HNS3 driver
From: lipeng (Y) @ 2017-12-21 6:57 UTC (permalink / raw)
To: David Miller; +Cc: netdev, linux-kernel, linuxarm, salil.mehta
In-Reply-To: <20171220.230452.1688628876856367788.davem@davemloft.net>
On 2017/12/21 12:04, David Miller wrote:
> From: "lipeng (Y)" <lipeng321@huawei.com>
> Date: Thu, 21 Dec 2017 09:30:01 +0800
>
>>
>> On 2017/12/21 3:28, David Miller wrote:
>>> From: Lipeng <lipeng321@huawei.com>
>>> Date: Wed, 20 Dec 2017 16:43:02 +0800
>>>
>>>> This patchset adds some new feature support and fixes some bugs:
>>>> [Patch 1/17 - 5/17] add the support to modify/query the tqp number
>>>> through ethtool -L/l command, and also fix some related bugs for
>>>> change tqp number.
>>>> [Patch 6/17 - 9-17] add support vlan tag offload on tx&&rx direction
>>>> for pf, and fix some related bugs.
>>>> [patch 10/17 - 11/17] fix bugs for auto negotiation.
>>>> [patch 12/17] adds support for ethtool command set_pauseparam.
>>>> [patch 13/17 - 14/17] add support to update flow control settings
>>>> after
>>>> autoneg.
>>>> [patch 15/17 - 17/17] fix some other bugs in net-next.
>>> In your From: email field, as well as you and your colleagues signoffs
>>> you are not using your full, real, name:
>>> ====================
>>> From: Lipeng <lipeng321@huawei.com>
>> My first name is 'Peng' and Surname is 'Li'.
>> But it is usually spelled as 'Lipeng' in one go when referring.
>> This is quite usual convention with full names originating from
>> China. Surnames comes first, followed by the first name and they
>> both are inseparable while they are written as well.
>> "Lipeng" is my full real name, and my sign-off's appear like above.
> The same applies to "qumingguang"? Why is it not capitalized?
> It seems to just be a copy of the email address username.
have checked with him, and will fix his name spelling to "Mingguang Qu".
Thanks
Lipeng
> .
>
^ permalink raw reply
* [PATCH net] l2tp: fix missing print session offset info
From: Hangbin Liu @ 2017-12-21 6:45 UTC (permalink / raw)
To: netdev; +Cc: James Chapman, David S. Miller, Hangbin Liu
Fixes: 309795f4bec ("l2tp: Add netlink control API for L2TP")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
---
net/l2tp/l2tp_netlink.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/l2tp/l2tp_netlink.c b/net/l2tp/l2tp_netlink.c
index a1f24fb..36378b4 100644
--- a/net/l2tp/l2tp_netlink.c
+++ b/net/l2tp/l2tp_netlink.c
@@ -761,6 +761,8 @@ static int l2tp_nl_session_send(struct sk_buff *skb, u32 portid, u32 seq, int fl
if ((session->ifname[0] &&
nla_put_string(skb, L2TP_ATTR_IFNAME, session->ifname)) ||
+ (session->offset &&
+ nla_put_u16(skb, L2TP_ATTR_OFFSET, session->offset) ||
(session->cookie_len &&
nla_put(skb, L2TP_ATTR_COOKIE, session->cookie_len,
&session->cookie[0])) ||
--
2.5.5
^ permalink raw reply related
* Re: [PATCH v3 next-queue 00/10] ixgbe: Add ipsec offload
From: Yanjun Zhu @ 2017-12-21 6:39 UTC (permalink / raw)
To: Shannon Nelson, intel-wired-lan, jeffrey.t.kirsher
Cc: steffen.klassert, sowmini.varadhan, netdev
In-Reply-To: <1513728002-7643-1-git-send-email-shannon.nelson@oracle.com>
On 2017/12/20 7:59, Shannon Nelson wrote:
> This is an implementation of the ipsec hardware offload feature for
> the ixgbe driver and Intel's 10Gbe series NICs: x540, x550, 82599.
Hi, Nelson
I notice that the ipsec feature is based on x540, x550, 82599. But this
ixgbe driver
will also work with 82598.
Does this ipsec feature also work with 82598?
Thanks a lot.
Zhu Yanjun
> These patches apply to net-next v4.14 as well as Jeff Kirsher's next-queue
> v4.15-rc1-206-ge47375b.
>
> The ixgbe NICs support ipsec offload for 1024 Rx and 1024 Tx Security
> Associations (SAs), using up to 128 inbound IP addresses, and using the
> rfc4106(gcm(aes)) encryption. This code does not yet support IPv6,
> checksum offload, or TSO in conjunction with the ipsec offload - those
> will be added in the future.
>
> This code shows improvements in both packet throughput and CPU utilization.
> For example, here are some quicky numbers that show the magnitude of the
> performance gain on a single run of "iperf -c <dest>" with the ipsec
> offload on both ends of a point-to-point connection:
>
> 9.4 Gbps - normal case
> 7.6 Gbps - ipsec with offload
> 343 Mbps - ipsec no offload
>
> To set up a similar test case, you first need to be sure you have a recent
> version of iproute2 that supports the ipsec offload tag, probably something
> from ip 4.12 or newer would be best. I have a shell script that builds
> up the appropriate commands for me, but here are the resulting commands
> for all tcp traffic between 14.0.0.52 and 14.0.0.70:
>
> For the left side (14.0.0.52):
> ip x p add dir out src 14.0.0.52/24 dst 14.0.0.70/24 proto tcp tmpl \
> proto esp src 14.0.0.52 dst 14.0.0.70 spi 0x07 mode transport reqid 0x07
> ip x p add dir in src 14.0.0.70/24 dst 14.0.0.52/24 proto tcp tmpl \
> proto esp dst 14.0.0.52 src 14.0.0.70 spi 0x07 mode transport reqid 0x07
> ip x s add proto esp src 14.0.0.52 dst 14.0.0.70 spi 0x07 mode transport \
> reqid 0x07 replay-window 32 \
> aead 'rfc4106(gcm(aes))' 0x44434241343332312423222114131211f4f3f2f1 128 \
> sel src 14.0.0.52/24 dst 14.0.0.70/24 proto tcp offload dev eth4 dir out
> ip x s add proto esp dst 14.0.0.52 src 14.0.0.70 spi 0x07 mode transport \
> reqid 0x07 replay-window 32 \
> aead 'rfc4106(gcm(aes))' 0x44434241343332312423222114131211f4f3f2f1 128 \
> sel src 14.0.0.70/24 dst 14.0.0.52/24 proto tcp offload dev eth4 dir in
>
> For the right side (14.0.0.70):
> ip x p add dir out src 14.0.0.70/24 dst 14.0.0.52/24 proto tcp tmpl \
> proto esp src 14.0.0.70 dst 14.0.0.52 spi 0x07 mode transport reqid 0x07
> ip x p add dir in src 14.0.0.52/24 dst 14.0.0.70/24 proto tcp tmpl \
> proto esp dst 14.0.0.70 src 14.0.0.52 spi 0x07 mode transport reqid 0x07
> ip x s add proto esp src 14.0.0.70 dst 14.0.0.52 spi 0x07 mode transport \
> reqid 0x07 replay-window 32 \
> aead 'rfc4106(gcm(aes))' 0x44434241343332312423222114131211f4f3f2f1 128 \
> sel src 14.0.0.70/24 dst 14.0.0.52/24 proto tcp offload dev eth4 dir out
> ip x s add proto esp dst 14.0.0.70 src 14.0.0.52 spi 0x07 mode transport \
> reqid 0x07 replay-window 32 \
> aead 'rfc4106(gcm(aes))' 0x44434241343332312423222114131211f4f3f2f1 128 \
> sel src 14.0.0.52/24 dst 14.0.0.70/24 proto tcp offload dev eth4 dir in
>
> In both cases, the command "ip x s flush ; ip x p flush" will clean
> it all out and remove the offloads.
>
> Lastly, thanks to Alex Duyck for his early comments.
>
> Please see the individual patches for specific update info.
>
> v3: fixes after comments from those wonderfully pesky kbuild robots
> v2: fixes after comments from Alex
>
> Shannon Nelson (10):
> ixgbe: clean up ipsec defines
> ixgbe: add ipsec register access routines
> ixgbe: add ipsec engine start and stop routines
> ixgbe: add ipsec data structures
> ixgbe: add ipsec offload add and remove SA
> ixgbe: restore offloaded SAs after a reset
> ixgbe: process the Rx ipsec offload
> ixgbe: process the Tx ipsec offload
> ixgbe: ipsec offload stats
> ixgbe: register ipsec offload with the xfrm subsystem
>
> drivers/net/ethernet/intel/ixgbe/Makefile | 1 +
> drivers/net/ethernet/intel/ixgbe/ixgbe.h | 33 +-
> drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 2 +
> drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c | 923 +++++++++++++++++++++++
> drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.h | 92 +++
> drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c | 4 +-
> drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 39 +-
> drivers/net/ethernet/intel/ixgbe/ixgbe_type.h | 22 +-
> 8 files changed, 1093 insertions(+), 23 deletions(-)
> create mode 100644 drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
> create mode 100644 drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.h
>
^ permalink raw reply
* Re: [PATCH RFC v2 0/5] Support asynchronous crypto for IPsec GSO.
From: Steffen Klassert @ 2017-12-21 6:39 UTC (permalink / raw)
To: netdev
In-Reply-To: <20171215091308.23626-1-steffen.klassert@secunet.com>
On Fri, Dec 15, 2017 at 10:13:03AM +0100, Steffen Klassert wrote:
> This patchset implements asynchronous crypto handling
> in the layer 2 TX path. With this we can allow IPsec
> ESP GSO for software crypto. This also merges the IPsec
> GSO and non-GSO paths to both use validate_xmit_xfrm().
>
> 1) Separate ESP handling from segmentation for GRO packets.
> This unifies the IPsec GSO and non GSO codepath.
>
> 2) Add asynchronous callbacks for xfrm on layer 2. This
> adds the necessary infrastructure to core networking.
>
> 3) Allow to use the layer2 IPsec GSO codepath for software
> crypto, all infrastructure is there now.
>
> 4) Also allow IPsec GSO with software crypto for local sockets.
>
> 5) Don't require synchronous crypto fallback on IPsec offloading,
> it is not needed anymore.
>
> I plan to merge this to ipsec-next during this development cycle.
This is now applied to ipsec-next.
^ permalink raw reply
* Re: [pull request][for-next 00/11] Mellanox, mlx5 E-Switch updates 2017-12-19
From: Saeed Mahameed @ 2017-12-21 6:19 UTC (permalink / raw)
To: davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org
Cc: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Leon Romanovsky, dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
In-Reply-To: <20171220.125631.1837619997849298593.davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org>
On Wed, 2017-12-20 at 12:56 -0500, David Miller wrote:
> From: Saeed Mahameed <saeedm@mellanox.com>
> Date: Tue, 19 Dec 2017 12:33:29 -0800
>
> > This patchset is based on rc4 and I see that net-next is still on
> > rc3, i hope
> > this is not a problem.
>
> If it doesn't pull cleanly into net-next, then it would be a problem.
It does pull cleanly.
Thanks.
^ permalink raw reply
* Re: [B.A.T.M.A.N.] [PATCH 00/19] pull request for net-next: batman-adv 2017-12-20
From: Sven Eckelmann @ 2017-12-21 5:58 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: David Miller, sw, netdev
In-Reply-To: <20171220.143946.211997742797133128.davem@davemloft.net>
[-- Attachment #1: Type: text/plain, Size: 485 bytes --]
On Mittwoch, 20. Dezember 2017 14:39:46 CET David Miller wrote:
[...]
> Pulled, but there was a minor docbook annotation conflict I had to
> address.
>
> This pull added () to the function names in the docbook comments,
> but this overlapped with the fix of a variable name in the docbook
> info for the same function.
>
> It was trivial, but please take a look.
Thanks, looks exactly like the merge I did while testing the net fixes with
the net-next changes.
Kind regards,
Sven
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply
* [PATCH net-next] net: dwc-xlgmac: Get rid of custom hex_dump_to_buffer()
From: Jie Deng @ 2017-12-21 5:32 UTC (permalink / raw)
To: netdev; +Cc: davem, Jose.Abreu, andriy.shevchenko, Jie Deng
Get rid of custom hex_dump_to_buffer().
The output is slightly changed, i.e. each byte followed by white space.
Note, we don't use print_hex_dump() here since the original code uses
nedev_dbg().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jie Deng <jiedeng@synopsys.com>
---
drivers/net/ethernet/synopsys/dwc-xlgmac-common.c | 24 +++++++----------------
1 file changed, 7 insertions(+), 17 deletions(-)
diff --git a/drivers/net/ethernet/synopsys/dwc-xlgmac-common.c b/drivers/net/ethernet/synopsys/dwc-xlgmac-common.c
index d655a42..eb1c6b0 100644
--- a/drivers/net/ethernet/synopsys/dwc-xlgmac-common.c
+++ b/drivers/net/ethernet/synopsys/dwc-xlgmac-common.c
@@ -333,9 +333,8 @@ void xlgmac_print_pkt(struct net_device *netdev,
struct sk_buff *skb, bool tx_rx)
{
struct ethhdr *eth = (struct ethhdr *)skb->data;
- unsigned char *buf = skb->data;
unsigned char buffer[128];
- unsigned int i, j;
+ unsigned int i;
netdev_dbg(netdev, "\n************** SKB dump ****************\n");
@@ -346,22 +345,13 @@ void xlgmac_print_pkt(struct net_device *netdev,
netdev_dbg(netdev, "Src MAC addr: %pM\n", eth->h_source);
netdev_dbg(netdev, "Protocol: %#06hx\n", ntohs(eth->h_proto));
- for (i = 0, j = 0; i < skb->len;) {
- j += snprintf(buffer + j, sizeof(buffer) - j, "%02hhx",
- buf[i++]);
-
- if ((i % 32) == 0) {
- netdev_dbg(netdev, " %#06x: %s\n", i - 32, buffer);
- j = 0;
- } else if ((i % 16) == 0) {
- buffer[j++] = ' ';
- buffer[j++] = ' ';
- } else if ((i % 4) == 0) {
- buffer[j++] = ' ';
- }
+ for (i = 0; i < skb->len; i += 32) {
+ unsigned int len = min(skb->len - i, 32U);
+
+ hex_dump_to_buffer(&skb->data[i], len, 32, 1,
+ buffer, sizeof(buffer), false);
+ netdev_dbg(netdev, " %#06x: %s\n", i, buffer);
}
- if (i % 32)
- netdev_dbg(netdev, " %#06x: %s\n", i - (i % 32), buffer);
netdev_dbg(netdev, "\n************** SKB dump ****************\n");
}
--
1.9.1
^ permalink raw reply related
* Re: [RFC PATCH] virtio_net: Extend virtio to use VF datapath when available
From: Jakub Kicinski @ 2017-12-21 4:52 UTC (permalink / raw)
To: Siwei Liu
Cc: mst, sridhar.samudrala, alexander.duyck, virtualization, netdev,
David Miller
In-Reply-To: <CADGSJ22mDyC0Sw2EPW96ZWvMPLnzif+Y9MMouhM-6T03ZaKA0Q@mail.gmail.com>
On Wed, 20 Dec 2017 18:16:30 -0800, Siwei Liu wrote:
> > The plan is to remove the delay and do the naming in the kernel.
> > This was suggested by Lennart since udev is only doing naming policy
> > because kernel names were not repeatable.
> >
> > This makes the VF show up as "ethN_vf" on Hyper-V which is user friendly.
> >
> > Patch is pending.
>
> While it's good to show VF with specific naming to indicate
> enslavement, I wonder wouldn't it be better to hide this netdev at all
> from the user space? IMHO this extra device is useless when being
> enslaved and we may delegate controls (e.g. ethtool) over to the
> para-virtual device instead? That way it's possible to eliminate the
> possibility of additional udev setup or modification?
>
> I'm not sure if this is consistent with Windows guest or not, but I
> don't find it _Linux_ user friendly that ethtool doesn't work on the
> composite interface any more, and I have to end up with finding out
> the correct enslaved VF I must operate on.
Hiding "low level" netdevs comes up from time to time, and is more
widely applicable than just to VF bonds. We should find a generic
solution to that problem.
^ permalink raw reply
* Re: pull-request: bpf 2017-12-21
From: David Miller @ 2017-12-21 4:12 UTC (permalink / raw)
To: daniel; +Cc: ast, netdev
In-Reply-To: <20171221025747.5071-1-daniel@iogearbox.net>
From: Daniel Borkmann <daniel@iogearbox.net>
Date: Thu, 21 Dec 2017 03:57:47 +0100
> The following pull-request contains BPF updates for your *net* tree.
...
> Please consider pulling these changes from:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git
Pulled, thanks Daniel.
^ permalink raw reply
* Re: [PATCH net-next v4 0/6] net: tcp: sctp: dccp: Replace jprobe usage with trace events
From: David Miller @ 2017-12-21 4:08 UTC (permalink / raw)
To: mhiramat
Cc: mingo, ian.mcdonald, vyasevich, stephen, rostedt, peterz, tglx,
linux-kernel, hpa, gerrit, nhorman, dccp, netdev, linux-sctp, sfr
In-Reply-To: <20171221113657.f25b2f61eb472579ab32132d@kernel.org>
From: Masami Hiramatsu <mhiramat@kernel.org>
Date: Thu, 21 Dec 2017 11:36:57 +0900
> Could you share your .config file?
You never need to ask me this question.
All of my test builds are with "allmodconfig".
^ permalink raw reply
* Re: [PATCH V3 net-next 00/17] add some features and fix some bugs for HNS3 driver
From: David Miller @ 2017-12-21 4:04 UTC (permalink / raw)
To: lipeng321; +Cc: netdev, linux-kernel, linuxarm, salil.mehta
In-Reply-To: <4f928ad7-de45-55e2-4f3d-df43d7def801@huawei.com>
From: "lipeng (Y)" <lipeng321@huawei.com>
Date: Thu, 21 Dec 2017 09:30:01 +0800
>
>
> On 2017/12/21 3:28, David Miller wrote:
>> From: Lipeng <lipeng321@huawei.com>
>> Date: Wed, 20 Dec 2017 16:43:02 +0800
>>
>>> This patchset adds some new feature support and fixes some bugs:
>>> [Patch 1/17 - 5/17] add the support to modify/query the tqp number
>>> through ethtool -L/l command, and also fix some related bugs for
>>> change tqp number.
>>> [Patch 6/17 - 9-17] add support vlan tag offload on tx&&rx direction
>>> for pf, and fix some related bugs.
>>> [patch 10/17 - 11/17] fix bugs for auto negotiation.
>>> [patch 12/17] adds support for ethtool command set_pauseparam.
>>> [patch 13/17 - 14/17] add support to update flow control settings
>>> after
>>> autoneg.
>>> [patch 15/17 - 17/17] fix some other bugs in net-next.
>> In your From: email field, as well as you and your colleagues signoffs
>> you are not using your full, real, name:
>> ====================
>> From: Lipeng <lipeng321@huawei.com>
>
> My first name is 'Peng' and Surname is 'Li'.
> But it is usually spelled as 'Lipeng' in one go when referring.
> This is quite usual convention with full names originating from
> China. Surnames comes first, followed by the first name and they
> both are inseparable while they are written as well.
> "Lipeng" is my full real name, and my sign-off's appear like above.
The same applies to "qumingguang"? Why is it not capitalized?
It seems to just be a copy of the email address username.
^ permalink raw reply
* Re: [PATCH v3 next-queue 05/10] ixgbe: add ipsec offload add and remove SA
From: Shannon Nelson @ 2017-12-21 3:30 UTC (permalink / raw)
To: Marcelo Ricardo Leitner
Cc: intel-wired-lan, jeffrey.t.kirsher, steffen.klassert,
sowmini.varadhan, netdev, saeedm, borisp, ilant
In-Reply-To: <20171221022104.GN6122@localhost.localdomain>
On 12/20/2017 6:21 PM, Marcelo Ricardo Leitner wrote:
> On Wed, Dec 20, 2017 at 05:39:13PM -0800, Shannon Nelson wrote:
>> On 12/20/2017 5:17 PM, Marcelo Ricardo Leitner wrote:
>>> Hi,
>>>
>>> On Tue, Dec 19, 2017 at 03:59:57PM -0800, Shannon Nelson wrote:
>>>> +}
>>>> +
>>>> +static const struct xfrmdev_ops ixgbe_xfrmdev_ops = {
>>>> + .xdo_dev_state_add = ixgbe_ipsec_add_sa,
>>>> + .xdo_dev_state_delete = ixgbe_ipsec_del_sa,
>>>> +};
>>>> +
>>>
>>> This struct is only declared if XFRM_OFFLOAD is selected. What is
>>> selecting it for ixgbe driver?
>>> mlx5 driver has an extra option for ipsec offload and it then does
>>> 'depends on XFRM_OFFLOAD'
>>>
>>> Marcelo
>>>
>>
>> I didn't bother putting a 'depends' item in the ixgbe's Kconfig entry, and I
>> didn't create an extra CONFIG variable to enable ixgbe's support of the
>> offload. If CONFIG_XFRM_OFFLOAD is set, then ixgbe will support it.
>
> You handled it via Makefile, okay. Missed it on patch 2, my bad.
>
> Anyhow, we probably could use some standard here across the vendors
> here. With this patchset, we have 2 drivers supporting it, and 2
> different ways to configure it.
I suspect that the mlx5 folks did an extra option as part of being the
first to support the feature, and needing an easy way to toggle support
while they were developing it without needing to rebuild the whole
kernel. Now that the feature has reached a certain level of "maturity",
I think we can treat it like other features (e.g. CONFIG_PCI_IOV,
CONFIG_FCOE, CONFIG_PM, CONFIG_DEBUG_FS) and not need driver specific
toggles.
sln
^ permalink raw reply
* Re: [PATCH bpf-next] tools/bpf: adjust rlimit RLIMIT_MEMLOCK for test_dev_cgroup
From: Alexei Starovoitov @ 2017-12-21 3:21 UTC (permalink / raw)
To: Yonghong Song; +Cc: ast, daniel, guro, netdev, kernel-team
In-Reply-To: <20171220183708.2334406-1-yhs@fb.com>
On Wed, Dec 20, 2017 at 10:37:08AM -0800, Yonghong Song wrote:
> The default rlimit RLIMIT_MEMLOCK is 64KB. In certain cases,
> e.g. in a test machine mimicking our production system, this test may
> fail due to unable to charge the required memory for prog load:
>
> $ ./test_dev_cgroup
> libbpf: load bpf program failed: Operation not permitted
> libbpf: failed to load program 'cgroup/dev'
> libbpf: failed to load object './dev_cgroup.o'
> Failed to load DEV_CGROUP program
> ...
>
> Changing the default rlimit RLIMIT_MEMLOCK to unlimited
> makes the test pass.
>
> This patch also fixed a problem where when bpf_prog_load fails,
> cleanup_cgroup_environment() should not be called since
> setup_cgroup_environment() has not been invoked. Otherwise,
> the following confusing message will appear:
> ...
> (/home/yhs/local/linux/tools/testing/selftests/bpf/cgroup_helpers.c:95:
> errno: No such file or directory) Opening Cgroup Procs: /mnt/cgroup.procs
> ...
>
> Signed-off-by: Yonghong Song <yhs@fb.com>
Applied, Thanks Yonghong.
^ permalink raw reply
* Re: [PATCH net-next v4 0/6] net: tcp: sctp: dccp: Replace jprobe usage with trace events
From: Steven Rostedt @ 2017-12-21 3:12 UTC (permalink / raw)
To: Masami Hiramatsu
Cc: David Miller, mingo, ian.mcdonald, vyasevich, stephen, peterz,
tglx, linux-kernel, hpa, gerrit, nhorman, dccp, netdev,
linux-sctp, sfr
In-Reply-To: <20171221113657.f25b2f61eb472579ab32132d@kernel.org>
On Thu, 21 Dec 2017 11:36:57 +0900
Masami Hiramatsu <mhiramat@kernel.org> wrote:
> On Wed, 20 Dec 2017 14:24:24 -0500 (EST)
> David Miller <davem@davemloft.net> wrote:
>
> > From: David Miller <davem@davemloft.net>
> > Date: Wed, 20 Dec 2017 14:20:40 -0500 (EST)
> >
> > > From: Masami Hiramatsu <mhiramat@kernel.org>
> > > Date: Wed, 20 Dec 2017 13:14:11 +0900
> > >
> > >> This series is v4 of the replacement of jprobe usage with trace
> > >> events. This version is rebased on net-next, fixes a build warning
> > >> and moves a temporal variable definition in a block.
> > >>
> > >> Previous version is here;
> > >> https://lkml.org/lkml/2017/12/19/153
> > >>
> > >> Changes from v3:
> > >> All: Rebased on net-next
> > >> [3/6]: fixes a build warning for i386 by casting pointer unsigned
> > >> long instead of __u64, and moves a temporal variable
> > >> definition in a block.
> > >
> > > Looks good, series applied to net-next, thanks.
> >
> > Actually, this doesn't even compile, so I've reverted:
> >
> > [davem@dhcp-10-15-49-227 net-next]$ make -s -j16
> > In file included from net/dccp/trace.h:105:0,
> > from net/dccp/proto.c:42:
> > ./include/trace/define_trace.h:89:42: fatal error: ./trace.h: No such file or directory
> > #include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
> > ^
> > compilation terminated.
>
> Hi David,
>
> Could you share your .config file? I would like to reproduce it.
> When I tried with attached kconfig, I could not reproduce this issue,
> and could run it.
>
Hi Masami,
Are you sure you committed everything in this change set? I don't see a
modification of the Makefile to get the trace.h file you created.
Shouldn't there be something like:
CFLAGS_proto.o := -I$(src)
in the Makefile?
-- Steve
^ permalink raw reply
* pull-request: bpf 2017-12-21
From: Daniel Borkmann @ 2017-12-21 2:57 UTC (permalink / raw)
To: davem; +Cc: daniel, ast, netdev
Hi David,
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix multiple security issues in the BPF verifier mostly related
to the value and min/max bounds tracking rework in 4.14. Issues
range from incorrect bounds calculation in some BPF_RSH cases,
to improper sign extension and reg size handling on 32 bit
ALU ops, missing strict alignment checks on stack pointers, and
several others that got fixed, from Jann, Alexei and Edward.
2) Fix various build failures in BPF selftests on sparc64. More
specifically, librt needed to be added to the libs to link
against and few format string fixups for sizeof, from David.
3) Fix one last remaining issue from BPF selftest build that was
still occuring on s390x from the asm/bpf_perf_event.h include
which could not find the asm/ptrace.h copy, from Hendrik.
Please consider pulling these changes from:
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git
Thanks a lot!
----------------------------------------------------------------
The following changes since commit ab14436065c8066c265540312742390d6d07ddd2:
net: phy: xgene: disable clk on error paths (2017-12-18 15:09:42 -0500)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git
for you to fetch changes up to 82abbf8d2fc46d79611ab58daa7c608df14bb3ee:
bpf: do not allow root to mangle valid pointers (2017-12-21 02:26:29 +0100)
----------------------------------------------------------------
Alexei Starovoitov (2):
bpf: fix integer overflows
bpf: do not allow root to mangle valid pointers
Daniel Borkmann (1):
Merge branch 'bpf-verifier-sec-fixes'
David Miller (1):
bpf: Fix tools and testing build.
Edward Cree (1):
bpf/verifier: fix bounds calculation on BPF_RSH
Hendrik Brueckner (1):
bpf: fix broken BPF selftest build on s390
Jann Horn (7):
bpf: fix incorrect sign extension in check_alu_op()
bpf: fix incorrect tracking of register size truncation
bpf: fix 32-bit ALU op verification
bpf: fix missing error return in check_stack_boundary()
bpf: force strict alignment checks for stack pointers
bpf: don't prune branches when a scalar is replaced with a pointer
selftests/bpf: add tests for recent bugfixes
include/linux/bpf_verifier.h | 4 +-
kernel/bpf/verifier.c | 277 +++++-----
tools/arch/s390/include/uapi/asm/bpf_perf_event.h | 2 +-
tools/testing/selftests/bpf/Makefile | 2 +-
tools/testing/selftests/bpf/test_progs.c | 8 +-
tools/testing/selftests/bpf/test_verifier.c | 605 ++++++++++++++++++++--
6 files changed, 730 insertions(+), 168 deletions(-)
^ permalink raw reply
* Re: [PATCH net] ipv6: Honor specified parameters in fibmatch lookup
From: David Ahern @ 2017-12-21 2:54 UTC (permalink / raw)
To: Ido Schimmel, netdev; +Cc: davem, roopa, mlxsw
In-Reply-To: <20171220102825.28234-1-idosch@mellanox.com>
On 12/20/17 3:28 AM, Ido Schimmel wrote:
> @@ -4327,6 +4321,15 @@ static int inet6_rtm_getroute(struct sk_buff *in_skb, struct nlmsghdr *nlh,
> goto errout;
> }
>
> + if (fibmatch && rt->dst.from) {
> + struct rt6_info *ort = container_of(rt->dst.from,
> + struct rt6_info, dst);
> +
> + dst_hold(&ort->dst);
> + ip6_rt_put(rt);
> + rt = ort;
> + }
> +
> skb = alloc_skb(NLMSG_GOODSIZE, GFP_KERNEL);
> if (!skb) {
> ip6_rt_put(rt);
>
That's going to need a fixup on the net-next merge -- from was moved
from dst to rt6_info. Change wise it looks ok to me.
Acked-by: David Ahern <dsahern@gmail.com>
^ permalink raw reply
* Re: [PATCH V3 net-next 00/17] add some features and fix some bugs for HNS3 driver
From: Hanjun Guo @ 2017-12-21 2:43 UTC (permalink / raw)
To: lipeng (Y), David Miller
Cc: netdev, linux-kernel, linuxarm, salil.mehta, qumingguang
In-Reply-To: <5619d233-a0bc-3bd9-daf4-cffb5486b396@huawei.com>
On 2017/12/21 10:27, lipeng (Y) wrote:
>
>
> On 2017/12/21 3:28, David Miller wrote:
>> From: Lipeng <lipeng321@huawei.com>
>> Date: Wed, 20 Dec 2017 16:43:02 +0800
>>
>>> This patchset adds some new feature support and fixes some bugs:
>>> [Patch 1/17 - 5/17] add the support to modify/query the tqp number
>>> through ethtool -L/l command, and also fix some related bugs for
>>> change tqp number.
>>> [Patch 6/17 - 9-17] add support vlan tag offload on tx&&rx direction
>>> for pf, and fix some related bugs.
>>> [patch 10/17 - 11/17] fix bugs for auto negotiation.
>>> [patch 12/17] adds support for ethtool command set_pauseparam.
>>> [patch 13/17 - 14/17] add support to update flow control settings after
>>> autoneg.
>>> [patch 15/17 - 17/17] fix some other bugs in net-next.
>> In your From: email field, as well as you and your colleagues signoffs
>> you are not using your full, real, name:
>>
>> ====================
>> From: Lipeng <lipeng321@huawei.com>
>
> My first name is 'Peng' and Surname is 'Li'.
> But it is usually spelled as 'Lipeng' in one go when referring.
> This is quite usual convention with full names originating from
> China. Surnames comes first, followed by the first name and they
> both are inseparable while they are written as well.
> "Lipeng" is my full real name, and my sign-off's appear like above.
>
>
> The name "lipeng" is very common in china, many guys in HuaWei have the
> same name "lipeng",
> So my email is lipeng321@huawei.com, to Distinguish from others.
>
> other guys who named "lipeng" in huawei , their email have an id too,
> such as lipengxxx@huawei.com.
>
> Wish the explanation is clear.
I think David was expecting two fixes here:
- The first one is that the Author of the patch
needs to match the first Signed-off-by in
the patch. In your patches, lots of them show
that you are the Author but qumingguang is
in the first Signed-off-by.
- It's better to use first name + last name:
Peng Li <lipeng321@huawei.com>
Mingguang Qu <qumingguang@huawei.com>
Thanks
Hanjun
^ permalink raw reply
* Re: [PATCH net-next v4 0/6] net: tcp: sctp: dccp: Replace jprobe usage with trace events
From: Masami Hiramatsu @ 2017-12-21 2:36 UTC (permalink / raw)
To: David Miller
Cc: mingo, ian.mcdonald, vyasevich, stephen, rostedt, peterz, tglx,
linux-kernel, hpa, gerrit, nhorman, dccp, netdev, linux-sctp, sfr
In-Reply-To: <20171220.142424.1214953044518214833.davem@davemloft.net>
[-- Attachment #1: Type: text/plain, Size: 3019 bytes --]
On Wed, 20 Dec 2017 14:24:24 -0500 (EST)
David Miller <davem@davemloft.net> wrote:
> From: David Miller <davem@davemloft.net>
> Date: Wed, 20 Dec 2017 14:20:40 -0500 (EST)
>
> > From: Masami Hiramatsu <mhiramat@kernel.org>
> > Date: Wed, 20 Dec 2017 13:14:11 +0900
> >
> >> This series is v4 of the replacement of jprobe usage with trace
> >> events. This version is rebased on net-next, fixes a build warning
> >> and moves a temporal variable definition in a block.
> >>
> >> Previous version is here;
> >> https://lkml.org/lkml/2017/12/19/153
> >>
> >> Changes from v3:
> >> All: Rebased on net-next
> >> [3/6]: fixes a build warning for i386 by casting pointer unsigned
> >> long instead of __u64, and moves a temporal variable
> >> definition in a block.
> >
> > Looks good, series applied to net-next, thanks.
>
> Actually, this doesn't even compile, so I've reverted:
>
> [davem@dhcp-10-15-49-227 net-next]$ make -s -j16
> In file included from net/dccp/trace.h:105:0,
> from net/dccp/proto.c:42:
> ./include/trace/define_trace.h:89:42: fatal error: ./trace.h: No such file or directory
> #include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
> ^
> compilation terminated.
Hi David,
Could you share your .config file? I would like to reproduce it.
When I tried with attached kconfig, I could not reproduce this issue,
and could run it.
====
/sys/kernel/debug/tracing/events # cd dccp/
/sys/kernel/debug/tracing/events/dccp # ls
dccp_probe enable filter
/sys/kernel/debug/tracing/events/dccp # cd dccp_probe/
/sys/kernel/debug/tracing/events/dccp/dccp_probe # ls
enable filter format hist id trigger
/sys/kernel/debug/tracing/events/dccp/dccp_probe # cat format
name: dccp_probe
ID: 1002
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:__u8 saddr[sizeof(struct sockaddr_in6)]; offset:8; size:28; signed:0;
field:__u8 daddr[sizeof(struct sockaddr_in6)]; offset:36; size:28; signed:0;
field:__u16 sport; offset:64; size:2; signed:0;
field:__u16 dport; offset:66; size:2; signed:0;
field:__u16 size; offset:68; size:2; signed:0;
field:__u16 tx_s; offset:70; size:2; signed:0;
field:__u32 tx_rtt; offset:72; size:4; signed:0;
field:__u32 tx_p; offset:76; size:4; signed:0;
field:__u32 tx_x_calc; offset:80; size:4; signed:0;
field:__u64 tx_x_recv; offset:88; size:8; signed:0;
field:__u64 tx_x; offset:96; size:8; signed:0;
field:__u32 tx_t_ipi; offset:104; size:4; signed:0;
print fmt: "src=%pISpc dest=%pISpc size=%d tx_s=%d tx_rtt=%d tx_p=%d tx_x_calc=%u tx_x_recv=%llu tx_x=%llu tx_t_ipi=%d", REC->saddr, REC->daddr, REC->size, REC->tx_s, REC->tx_rtt, REC->tx_p, REC->tx_x_calc, REC->tx_x_recv, REC->tx_x, REC->tx_t_ipi
====
Thank you,
--
Masami Hiramatsu <mhiramat@kernel.org>
[-- Attachment #2: kconfig --]
[-- Type: application/octet-stream, Size: 81817 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 4.15.0-rc3 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="ermine"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_CPU_ISOLATION is not set
#
# RCU Subsystem
#
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
# CONFIG_BUILD_BIN2C is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_ARCH_SUPPORTS_INT128=y
# CONFIG_NUMA_BALANCING is not set
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_SWAP_ENABLED=y
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_CGROUP_PIDS=y
# CONFIG_CGROUP_RDMA is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_SOCK_CGROUP_DATA is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
# CONFIG_BPF_SYSCALL is not set
# CONFIG_USERFAULTFD is not set
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLUB_MEMCG_SYSFS_ON is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLAB_FREELIST_HARDENED is not set
CONFIG_SLUB_CPU_PARTIAL=y
# CONFIG_SYSTEM_DATA_VERIFICATION is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_KPROBE_OVERRIDE=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_GCC_PLUGINS=y
# CONFIG_GCC_PLUGINS is not set
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_THIN_ARCHIVES=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_HAVE_STACK_VALIDATION=y
# CONFIG_HAVE_ARCH_HASH is not set
# CONFIG_ISA_BUS_API is not set
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
# CONFIG_CPU_NO_EFFICIENT_FFS is not set
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_ARCH_HAS_REFCOUNT=y
# CONFIG_REFCOUNT_FULL is not set
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_ZONED is not set
# CONFIG_BLK_DEV_THROTTLING is not set
# CONFIG_BLK_CMDLINE_PARSER is not set
# CONFIG_BLK_WBT is not set
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CFQ_GROUP_IOSCHED is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
# CONFIG_IOSCHED_BFQ is not set
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_FAST_FEATURE_TESTS=y
# CONFIG_X86_X2APIC is not set
CONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not set
# CONFIG_INTEL_RDT is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
CONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_PARAVIRT_SPINLOCKS is not set
# CONFIG_XEN is not set
CONFIG_KVM_GUEST=y
# CONFIG_KVM_DEBUG_FS is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_GART_IOMMU is not set
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=64
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_MC_PRIO=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
# CONFIG_X86_MCE is not set
#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_PERF_EVENTS_INTEL_RAPL=y
CONFIG_PERF_EVENTS_INTEL_CSTATE=y
# CONFIG_PERF_EVENTS_AMD_POWER is not set
# CONFIG_VM86 is not set
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_X86_5LEVEL is not set
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_X86_DIRECT_GBPAGES=y
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
# CONFIG_AMD_MEM_ENCRYPT is not set
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_GENERIC_GUP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_TRANSPARENT_HUGEPAGE is not set
CONFIG_ARCH_WANTS_THP_SWAP=y
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
# CONFIG_CMA is not set
# CONFIG_ZPOOL is not set
# CONFIG_ZBUD is not set
# CONFIG_ZSMALLOC is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_ZONE_DEVICE=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_BENCHMARK is not set
# CONFIG_X86_PMEM_LEGACY is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
CONFIG_X86_INTEL_UMIP=y
# CONFIG_X86_INTEL_MPX is not set
# CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS is not set
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_KEXEC_FILE is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_LEGACY_VSYSCALL_NATIVE is not set
CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
CONFIG_HAVE_LIVEPATCH=y
# CONFIG_LIVEPATCH is not set
CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
# CONFIG_PM is not set
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_LPIT=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_CPPC_LIB=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
# CONFIG_ACPI_NFIT is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
# CONFIG_ACPI_APEI is not set
# CONFIG_DPTF_POWER is not set
# CONFIG_PMIC_OPREGION is not set
# CONFIG_ACPI_CONFIGFS is not set
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set
#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
# CONFIG_X86_PCC_CPUFREQ is not set
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ_CPB=y
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_AMD_FREQ_SENSITIVITY is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
# CONFIG_INTEL_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
# CONFIG_PCIE_DPC is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_BUS_ADDR_T_64BIT=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_PCI_ATS=y
CONFIG_PCI_LOCKLESS_CONFIG=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# DesignWare PCI Core Support
#
# CONFIG_PCIE_DW_PLAT is not set
#
# PCI host controller drivers
#
# CONFIG_VMD is not set
#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set
# CONFIG_X86_SYSFB is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
# CONFIG_X86_X32 is not set
CONFIG_COMPAT_32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_NET=y
CONFIG_NET_INGRESS=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_TLS is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=y
CONFIG_IP_MROUTE=y
# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
# CONFIG_NET_UDP_TUNNEL is not set
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_NV is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_TCP_CONG_DCTCP is not set
# CONFIG_TCP_CONG_CDG is not set
# CONFIG_TCP_CONG_BBR is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
# CONFIG_INET6_ESP_OFFLOAD is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_IPV6_ILA is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_VTI is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_FOU is not set
# CONFIG_IPV6_FOU_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NET_PTP_CLASSIFY is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_ACCT=y
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_LOG_COMMON=m
# CONFIG_NF_LOG_NETDEV is not set
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_PROCFS=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
# CONFIG_NF_CONNTRACK_AMANDA is not set
CONFIG_NF_CONNTRACK_FTP=y
# CONFIG_NF_CONNTRACK_H323 is not set
CONFIG_NF_CONNTRACK_IRC=y
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_SNMP is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SANE is not set
CONFIG_NF_CONNTRACK_SIP=y
# CONFIG_NF_CONNTRACK_TFTP is not set
CONFIG_NF_CT_NETLINK=y
# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set
CONFIG_NF_NAT=y
CONFIG_NF_NAT_NEEDED=y
CONFIG_NF_NAT_PROTO_DCCP=y
CONFIG_NF_NAT_PROTO_UDPLITE=y
CONFIG_NF_NAT_PROTO_SCTP=y
# CONFIG_NF_NAT_AMANDA is not set
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_IRC=y
CONFIG_NF_NAT_SIP=y
# CONFIG_NF_NAT_TFTP is not set
CONFIG_NF_NAT_REDIRECT=y
CONFIG_NF_TABLES=y
# CONFIG_NF_TABLES_INET is not set
# CONFIG_NF_TABLES_NETDEV is not set
# CONFIG_NFT_EXTHDR is not set
# CONFIG_NFT_META is not set
# CONFIG_NFT_RT is not set
# CONFIG_NFT_NUMGEN is not set
# CONFIG_NFT_CT is not set
# CONFIG_NFT_SET_RBTREE is not set
# CONFIG_NFT_SET_HASH is not set
# CONFIG_NFT_SET_BITMAP is not set
# CONFIG_NFT_COUNTER is not set
# CONFIG_NFT_LOG is not set
# CONFIG_NFT_LIMIT is not set
CONFIG_NFT_MASQ=y
CONFIG_NFT_REDIR=y
CONFIG_NFT_NAT=y
# CONFIG_NFT_OBJREF is not set
# CONFIG_NFT_QUOTA is not set
CONFIG_NFT_REJECT=y
# CONFIG_NFT_COMPAT is not set
# CONFIG_NFT_HASH is not set
CONFIG_NETFILTER_XTABLES=y
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=y
#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set
# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
# CONFIG_NETFILTER_XT_TARGET_HL is not set
# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
CONFIG_NETFILTER_XT_TARGET_LOG=m
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
CONFIG_NETFILTER_XT_NAT=y
# CONFIG_NETFILTER_XT_TARGET_NETMAP is not set
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
CONFIG_NETFILTER_XT_TARGET_REDIRECT=y
# CONFIG_NETFILTER_XT_TARGET_TEE is not set
# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=y
# CONFIG_NETFILTER_XT_MATCH_BPF is not set
# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
# CONFIG_NETFILTER_XT_MATCH_CPU is not set
CONFIG_NETFILTER_XT_MATCH_DCCP=y
# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ECN is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
# CONFIG_NETFILTER_XT_MATCH_HL is not set
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
# CONFIG_NETFILTER_XT_MATCH_OSF is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
CONFIG_NETFILTER_XT_MATCH_POLICY=y
# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
# CONFIG_NF_SOCKET_IPV4 is not set
# CONFIG_NF_TABLES_IPV4 is not set
# CONFIG_NF_TABLES_ARP is not set
# CONFIG_NF_DUP_IPV4 is not set
CONFIG_NF_LOG_ARP=m
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=y
CONFIG_NF_NAT_IPV4=y
CONFIG_NF_NAT_MASQUERADE_IPV4=y
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
CONFIG_IP_NF_IPTABLES=y
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_RPFILTER is not set
# CONFIG_IP_NF_MATCH_TTL is not set
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
# CONFIG_IP_NF_TARGET_SYNPROXY is not set
CONFIG_IP_NF_NAT=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
# CONFIG_IP_NF_TARGET_NETMAP is not set
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_IP_NF_MANGLE=y
# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
# CONFIG_IP_NF_TARGET_ECN is not set
# CONFIG_IP_NF_TARGET_TTL is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=y
CONFIG_NF_CONNTRACK_IPV6=y
# CONFIG_NF_SOCKET_IPV6 is not set
# CONFIG_NF_TABLES_IPV6 is not set
# CONFIG_NF_DUP_IPV6 is not set
CONFIG_NF_REJECT_IPV6=y
CONFIG_NF_LOG_IPV6=m
# CONFIG_NF_NAT_IPV6 is not set
CONFIG_IP6_NF_IPTABLES=y
# CONFIG_IP6_NF_MATCH_AH is not set
# CONFIG_IP6_NF_MATCH_EUI64 is not set
# CONFIG_IP6_NF_MATCH_FRAG is not set
# CONFIG_IP6_NF_MATCH_OPTS is not set
# CONFIG_IP6_NF_MATCH_HL is not set
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
# CONFIG_IP6_NF_MATCH_MH is not set
# CONFIG_IP6_NF_MATCH_RPFILTER is not set
# CONFIG_IP6_NF_MATCH_RT is not set
# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_REJECT=y
# CONFIG_IP6_NF_TARGET_SYNPROXY is not set
CONFIG_IP6_NF_MANGLE=y
# CONFIG_IP6_NF_RAW is not set
# CONFIG_IP6_NF_NAT is not set
# CONFIG_NF_TABLES_BRIDGE is not set
CONFIG_BRIDGE_NF_EBTABLES=y
# CONFIG_BRIDGE_EBT_BROUTE is not set
# CONFIG_BRIDGE_EBT_T_FILTER is not set
CONFIG_BRIDGE_EBT_T_NAT=y
# CONFIG_BRIDGE_EBT_802_3 is not set
# CONFIG_BRIDGE_EBT_AMONG is not set
# CONFIG_BRIDGE_EBT_ARP is not set
# CONFIG_BRIDGE_EBT_IP is not set
# CONFIG_BRIDGE_EBT_IP6 is not set
# CONFIG_BRIDGE_EBT_LIMIT is not set
# CONFIG_BRIDGE_EBT_MARK is not set
# CONFIG_BRIDGE_EBT_PKTTYPE is not set
# CONFIG_BRIDGE_EBT_STP is not set
# CONFIG_BRIDGE_EBT_VLAN is not set
# CONFIG_BRIDGE_EBT_ARPREPLY is not set
CONFIG_BRIDGE_EBT_DNAT=y
# CONFIG_BRIDGE_EBT_MARK_T is not set
# CONFIG_BRIDGE_EBT_REDIRECT is not set
# CONFIG_BRIDGE_EBT_SNAT is not set
# CONFIG_BRIDGE_EBT_LOG is not set
# CONFIG_BRIDGE_EBT_NFLOG is not set
CONFIG_IP_DCCP=y
#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_TFRC_LIB=y
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_COOKIE_HMAC_SHA1 is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_HAVE_NET_DSA=y
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_CBS is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
# CONFIG_NET_SCH_CODEL is not set
# CONFIG_NET_SCH_FQ_CODEL is not set
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
# CONFIG_NET_SCH_INGRESS is not set
# CONFIG_NET_SCH_PLUG is not set
# CONFIG_NET_SCH_DEFAULT is not set
#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_CLS_CGROUP is not set
# CONFIG_NET_CLS_BPF is not set
# CONFIG_NET_CLS_FLOWER is not set
# CONFIG_NET_CLS_MATCHALL is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
# CONFIG_NET_EMATCH_NBYTE is not set
# CONFIG_NET_EMATCH_U32 is not set
# CONFIG_NET_EMATCH_META is not set
# CONFIG_NET_EMATCH_TEXT is not set
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_SAMPLE is not set
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
# CONFIG_NET_ACT_CSUM is not set
# CONFIG_NET_ACT_VLAN is not set
# CONFIG_NET_ACT_BPF is not set
# CONFIG_NET_ACT_CONNMARK is not set
# CONFIG_NET_ACT_SKBMOD is not set
# CONFIG_NET_ACT_IFE is not set
# CONFIG_NET_ACT_TUNNEL_KEY is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_NET_NSH is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_NET_NCSI is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
# CONFIG_CGROUP_NET_CLASSID is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
# CONFIG_BPF_JIT is not set
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
# CONFIG_STREAM_PARSER is not set
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
# CONFIG_NET_DEVLINK is not set
CONFIG_MAY_USE_DEVLINK=y
CONFIG_HAVE_EBPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
#
# Bus devices
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SKD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_VIRTIO_BLK=y
# CONFIG_VIRTIO_BLK_SCSI is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set
#
# NVME Support
#
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_NVME_FC is not set
#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_SRAM is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set
#
# Texas Instruments shared transport line discipline
#
#
# Altera FPGA firmware download module (requires I2C)
#
# CONFIG_INTEL_MEI is not set
# CONFIG_INTEL_MEI_ME is not set
# CONFIG_INTEL_MEI_TXE is not set
# CONFIG_VMWARE_VMCI is not set
#
# Intel MIC & related support
#
#
# Intel MIC Bus Driver
#
# CONFIG_INTEL_MIC_BUS is not set
#
# SCIF Bus Driver
#
# CONFIG_SCIF_BUS is not set
#
# VOP Bus Driver
#
# CONFIG_VOP_BUS is not set
#
# Intel MIC Host Driver
#
#
# Intel MIC Card Driver
#
#
# SCIF Driver
#
#
# Intel MIC Coprocessor State Management (COSM) Drivers
#
#
# VOP Driver
#
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_CXL_BASE is not set
# CONFIG_CXL_AFU_DRIVER_OPS is not set
# CONFIG_CXL_LIB is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
# CONFIG_IFB is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_MACSEC is not set
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_TUN is not set
# CONFIG_TUN_VNET_CROSS_LE is not set
CONFIG_VETH=y
CONFIG_VIRTIO_NET=y
# CONFIG_NLMON is not set
# CONFIG_ARCNET is not set
#
# CAIF transport drivers
#
#
# Distributed Switch Architecture drivers
#
CONFIG_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_AGERE is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
# CONFIG_NET_VENDOR_AMAZON is not set
# CONFIG_NET_VENDOR_AMD is not set
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_AQTION is not set
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_AURORA is not set
# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_BROCADE is not set
# CONFIG_NET_VENDOR_CAVIUM is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_CX_ECAT is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_EZCHIP is not set
# CONFIG_NET_VENDOR_EXAR is not set
# CONFIG_NET_VENDOR_HP is not set
CONFIG_NET_VENDOR_HUAWEI=y
# CONFIG_HINIC is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_JME is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
CONFIG_NET_PACKET_ENGINE=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_REALTEK is not set
# CONFIG_NET_VENDOR_RENESAS is not set
# CONFIG_NET_VENDOR_RDC is not set
# CONFIG_NET_VENDOR_ROCKER is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_THUNDER is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_AMD_PHY is not set
# CONFIG_AQUANTIA_PHY is not set
# CONFIG_AT803X_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_CORTINA_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_DP83822_PHY is not set
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_INTEL_XWAY_PHY is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MARVELL_10G_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_RENESAS_PHY is not set
# CONFIG_ROCKCHIP_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_TERANETICS_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Host-side USB support is needed for USB Network Adapter support
#
# CONFIG_WLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
# CONFIG_NETDEVSIM is not set
# CONFIG_ISDN is not set
# CONFIG_NVM is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
# CONFIG_MOUSE_PS2_VMMOUSE is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_SERIAL_WACOM4 is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_RMI4_CORE is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_NOZOMI is not set
# CONFIG_ISI is not set
# CONFIG_N_HDLC is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
# CONFIG_SERIAL_8250_FSL is not set
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y
# CONFIG_SERIAL_8250_MOXA is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_DEV_BUS is not set
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_AMD is not set
CONFIG_HW_RANDOM_VIA=y
# CONFIG_HW_RANDOM_VIRTIO is not set
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set
#
# I2C support
#
# CONFIG_I2C is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
# CONFIG_PPS_CLIENT_GPIO is not set
#
# PPS generators support
#
#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# CONFIG_PINCTRL is not set
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_AVS is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_CHARGER_MAX8903 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_FAM15H_POWER is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_SENSORS_ASPEED is not set
# CONFIG_SENSORS_DELL_SMM is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_I5500 is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_NCT6683 is not set
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_XGENE is not set
#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_INTEL_POWERCLAMP is not set
# CONFIG_INTEL_SOC_DTS_THERMAL is not set
#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
# CONFIG_INTEL_PCH_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_CORE is not set
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
# CONFIG_WATCHDOG_SYSFS is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_WDAT_WDT is not set
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_F71808E_WDT is not set
# CONFIG_SP5100_TCO is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_IE6XX_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_NV_TCO is not set
# CONFIG_60XX_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_VIA_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
# CONFIG_NI903X_WDT is not set
# CONFIG_NIC7018_WDT is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RTSX_PCI is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_REGULATOR is not set
# CONFIG_RC_CORE is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
# CONFIG_DRM is not set
#
# ACP (Audio CoProcessor) Configuration
#
#
# AMD Library routines
#
# CONFIG_CHASH is not set
# CONFIG_DRM_LIB_RANDOM is not set
#
# Frame buffer Devices
#
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
# CONFIG_VGASTATE is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
# CONFIG_VGACON_SOFT_SCROLLBACK_PERSISTENT_ENABLE_BY_DEFAULT is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
# CONFIG_SOUND is not set
#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
CONFIG_HIDRAW=y
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=y
# CONFIG_HID_AUREAL is not set
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_CMEDIA is not set
CONFIG_HID_CYPRESS=y
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_WALTOP is not set
CONFIG_HID_GYRATION=y
# CONFIG_HID_ICADE is not set
CONFIG_HID_ITE=y
# CONFIG_HID_TWINHAN is not set
CONFIG_HID_KENSINGTON=y
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LENOVO is not set
CONFIG_HID_LOGITECH=y
# CONFIG_HID_LOGITECH_DJ is not set
# CONFIG_HID_LOGITECH_HIDPP is not set
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
CONFIG_LOGIWHEELS_FF=y
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MAYFLASH is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTI is not set
# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=y
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_SAITEK is not set
CONFIG_HID_SAMSUNG=y
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEELSERIES is not set
CONFIG_HID_SUNPLUS=y
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
CONFIG_HID_TOPSEED=y
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set
#
# Intel ISH HID support
#
# CONFIG_INTEL_ISH_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
#
# SPI RTC drivers
#
#
# SPI and I2C RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_FTRTC010 is not set
#
# HID Sensor RTC drivers
#
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
# CONFIG_ALTERA_MSGDMA is not set
# CONFIG_INTEL_IDMA64 is not set
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
CONFIG_DW_DMAC_CORE=y
# CONFIG_DW_DMAC is not set
# CONFIG_DW_DMAC_PCI is not set
CONFIG_HSU_DMA=y
#
# DMA Clients
#
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y
#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
# CONFIG_VIRTIO_BALLOON is not set
CONFIG_VIRTIO_INPUT=y
# CONFIG_VIRTIO_MMIO is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
# CONFIG_HYPERV_TSCPAGE is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACERHDF is not set
# CONFIG_DELL_SMO8800 is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_HP_WIRELESS is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_ASUS_WIRELESS is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_HID_EVENT is not set
# CONFIG_INTEL_VBTN is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_INTEL_PMC_CORE is not set
# CONFIG_IBM_RTL is not set
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
# CONFIG_PVPANIC is not set
# CONFIG_INTEL_PMC_IPC is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
# CONFIG_INTEL_PUNIT_IPC is not set
# CONFIG_MLX_PLATFORM is not set
# CONFIG_MLX_CPLD_PLATFORM is not set
# CONFIG_INTEL_TURBO_MAX_3 is not set
CONFIG_PMC_ATOM=y
# CONFIG_CHROME_PLATFORMS is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_NXP is not set
# CONFIG_COMMON_CLK_PXA is not set
# CONFIG_COMMON_CLK_PIC32 is not set
# CONFIG_HWSPINLOCK is not set
#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
CONFIG_MAILBOX=y
CONFIG_PCC=y
# CONFIG_ALTERA_MBOX is not set
# CONFIG_IOMMU_SUPPORT is not set
#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
#
# Rpmsg drivers
#
# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
# CONFIG_RPMSG_VIRTIO is not set
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
#
# Broadcom SoC drivers
#
#
# i.MX SoC drivers
#
#
# Qualcomm SoC drivers
#
# CONFIG_SUNXI_SRAM is not set
# CONFIG_SOC_TI is not set
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
#
# IRQ chip support
#
CONFIG_ARM_GIC_MAX_NR=1
# CONFIG_ARM_GIC_V3_ITS is not set
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set
#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
#
# Performance monitor support
#
CONFIG_RAS=y
# CONFIG_THUNDERBOLT is not set
#
# Android
#
# CONFIG_ANDROID is not set
# CONFIG_LIBNVDIMM is not set
CONFIG_DAX=y
CONFIG_NVMEM=y
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# CONFIG_FPGA is not set
#
# FSI support
#
# CONFIG_FSI is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not set
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_FW_CFG_SYSFS is not set
# CONFIG_GOOGLE_FIRMWARE is not set
# CONFIG_EFI_DEV_PATH_PARSER is not set
#
# Tegra firmware driver
#
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
# CONFIG_FS_DAX is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_OVERLAY_FS=y
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
# CONFIG_OVERLAY_FS_INDEX is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=y
CONFIG_9P_FS_POSIX_ACL=y
# CONFIG_9P_FS_SECURITY is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set
#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_STACK_VALIDATION=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_VM is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KASAN=y
# CONFIG_KASAN is not set
CONFIG_ARCH_HAS_KCOV=y
# CONFIG_KCOV is not set
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Lockups and Hangs
#
# CONFIG_SOFTLOCKUP_DETECTOR is not set
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set
CONFIG_DEBUG_PREEMPT=y
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
# CONFIG_TORTURE_TEST is not set
# CONFIG_RCU_PERF_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_TRACE=y
# CONFIG_RCU_EQS_DEBUG is not set
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_PREEMPTIRQ_EVENTS is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_HWLAT_TRACER is not set
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENTS=y
CONFIG_UPROBE_EVENTS=y
CONFIG_PROBE_EVENTS=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
CONFIG_FTRACE_SELFTEST=y
CONFIG_FTRACE_STARTUP_TEST=y
# CONFIG_EVENT_TRACE_TEST_SYSCALLS is not set
# CONFIG_MMIOTRACE is not set
CONFIG_TRACING_MAP=y
CONFIG_HIST_TRIGGERS=y
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
CONFIG_TRACE_EVAL_MAP_FILE=y
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_DMA_API_DEBUG is not set
#
# Runtime Testing
#
# CONFIG_LKDTM is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_TEST_SORT is not set
CONFIG_KPROBES_SANITY_TEST=y
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_HASH is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_BPF is not set
# CONFIG_TEST_FIND_BIT is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_SYSCTL is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_TEST_KMOD is not set
# CONFIG_MEMTEST is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_TRACE_EVENTS is not set
# CONFIG_SAMPLE_TRACE_PRINTK is not set
# CONFIG_SAMPLE_KOBJECT is not set
# CONFIG_SAMPLE_KPROBES is not set
# CONFIG_SAMPLE_HW_BREAKPOINT is not set
# CONFIG_SAMPLE_KFIFO is not set
# CONFIG_SAMPLE_CONNECTOR is not set
# CONFIG_SAMPLE_SECCOMP is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
# CONFIG_UBSAN is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
# CONFIG_STRICT_DEVMEM is not set
CONFIG_EARLY_PRINTK_USB=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_EARLY_PRINTK_USB_XDBC is not set
# CONFIG_X86_PTDUMP_CORE is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_WX is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_X86_DECODER_SELFTEST=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
CONFIG_X86_DEBUG_FPU=y
# CONFIG_PUNIT_ATOM_DEBUG is not set
CONFIG_UNWINDER_ORC=y
# CONFIG_UNWINDER_FRAME_POINTER is not set
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_COMPAT=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_BIG_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
# CONFIG_FORTIFY_SOURCE is not set
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_RSA=y
# CONFIG_CRYPTO_DH is not set
# CONFIG_CRYPTO_ECDH is not set
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_MCRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_ENGINE=m
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_KEYWRAP is not set
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
# CONFIG_CRYPTO_CRCT10DIF is not set
CONFIG_CRYPTO_GHASH=y
# CONFIG_CRYPTO_POLY1305 is not set
# CONFIG_CRYPTO_POLY1305_X86_64 is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA1_SSSE3 is not set
# CONFIG_CRYPTO_SHA256_SSSE3 is not set
# CONFIG_CRYPTO_SHA512_SSSE3 is not set
# CONFIG_CRYPTO_SHA1_MB is not set
# CONFIG_CRYPTO_SHA256_MB is not set
# CONFIG_CRYPTO_SHA512_MB is not set
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_SHA3 is not set
# CONFIG_CRYPTO_SM3 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAMELLIA_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_CHACHA20 is not set
# CONFIG_CRYPTO_CHACHA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
# CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC is not set
# CONFIG_CRYPTO_DEV_CCP is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
# CONFIG_CRYPTO_DEV_NITROX_CNN55XX is not set
CONFIG_CRYPTO_DEV_VIRTIO=m
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS7_MESSAGE_PARSER=y
#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_VHOST_NET is not set
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC4 is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
# CONFIG_DMA_NOOP_OPS is not set
# CONFIG_DMA_VIRT_OPS is not set
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
# CONFIG_IRQ_POLL is not set
CONFIG_MPILIB=y
CONFIG_OID_REGISTRY=y
# CONFIG_SG_SPLIT is not set
# CONFIG_SG_POOL is not set
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_SBITMAP=y
# CONFIG_STRING_SELFTEST is not set
^ permalink raw reply
* Re: [PATCH V3 net-next 00/17] add some features and fix some bugs for HNS3 driver
From: lipeng (Y) @ 2017-12-21 2:27 UTC (permalink / raw)
To: David Miller; +Cc: netdev, linux-kernel, linuxarm, salil.mehta
In-Reply-To: <20171220.142843.568343410203899321.davem@davemloft.net>
On 2017/12/21 3:28, David Miller wrote:
> From: Lipeng <lipeng321@huawei.com>
> Date: Wed, 20 Dec 2017 16:43:02 +0800
>
>> This patchset adds some new feature support and fixes some bugs:
>> [Patch 1/17 - 5/17] add the support to modify/query the tqp number
>> through ethtool -L/l command, and also fix some related bugs for
>> change tqp number.
>> [Patch 6/17 - 9-17] add support vlan tag offload on tx&&rx direction
>> for pf, and fix some related bugs.
>> [patch 10/17 - 11/17] fix bugs for auto negotiation.
>> [patch 12/17] adds support for ethtool command set_pauseparam.
>> [patch 13/17 - 14/17] add support to update flow control settings after
>> autoneg.
>> [patch 15/17 - 17/17] fix some other bugs in net-next.
> In your From: email field, as well as you and your colleagues signoffs
> you are not using your full, real, name:
>
> ====================
> From: Lipeng <lipeng321@huawei.com>
My first name is 'Peng' and Surname is 'Li'.
But it is usually spelled as 'Lipeng' in one go when referring.
This is quite usual convention with full names originating from
China. Surnames comes first, followed by the first name and they
both are inseparable while they are written as well.
"Lipeng" is my full real name, and my sign-off's appear like above.
The name "lipeng" is very common in china, many guys in HuaWei have the
same name "lipeng",
So my email is lipeng321@huawei.com, to Distinguish from others.
other guys who named "lipeng" in huawei , their email have an id too,
such as lipengxxx@huawei.com.
Wish the explanation is clear.
Thanks,
Lipeng
> ====================
> Signed-off-by: qumingguang <qumingguang@huawei.com>
> Signed-off-by: Lipeng <lipeng321@huawei.com>
> ====================
>
> Please fix this.
>
> .
>
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox