* Re: [RFC PATCH v2 06/10] udp: cope with UDP GRO packet misdirection
From: Paolo Abeni @ 2018-10-22 12:51 UTC (permalink / raw)
To: Steffen Klassert; +Cc: netdev, Willem de Bruijn
In-Reply-To: <20181022114317.GI3823@gauss3.secunet.de>
Hi,
On Mon, 2018-10-22 at 13:43 +0200, Steffen Klassert wrote:
> On Fri, Oct 19, 2018 at 04:25:16PM +0200, Paolo Abeni wrote:
> > +
> > +static inline struct sk_buff *udp_rcv_segment(struct sock *sk,
> > + struct sk_buff *skb)
> > +{
> > + struct sk_buff *segs;
> > +
> > + /* the GSO CB lays after the UDP one, no need to save and restore any
> > + * CB fragment, just initialize it
> > + */
> > + segs = __skb_gso_segment(skb, NETIF_F_SG, false);
> > + if (unlikely(IS_ERR(segs)))
> > + kfree_skb(skb);
> > + else if (segs)
> > + consume_skb(skb);
> > + return segs;
> > +}
> > +
> > +
>
> One empty line too much.
Thank you, will handle in the next iteration.
> > #define udp_portaddr_for_each_entry(__sk, list) \
> > hlist_for_each_entry(__sk, list, __sk_common.skc_portaddr_node)
> >
> > diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
> > index 2331ac9de954..0d55145ce9f5 100644
> > --- a/net/ipv4/udp.c
> > +++ b/net/ipv4/udp.c
> > @@ -1909,7 +1909,7 @@ EXPORT_SYMBOL(udp_encap_enable);
> > * Note that in the success and error cases, the skb is assumed to
> > * have either been requeued or freed.
> > */
> > -static int udp_queue_rcv_skb(struct sock *sk, struct sk_buff *skb)
> > +static int udp_queue_rcv_one_skb(struct sock *sk, struct sk_buff *skb)
> > {
> > struct udp_sock *up = udp_sk(sk);
> > int is_udplite = IS_UDPLITE(sk);
> > @@ -2012,6 +2012,29 @@ static int udp_queue_rcv_skb(struct sock *sk, struct sk_buff *skb)
> > return -1;
> > }
> >
> > +void ip_protocol_deliver_rcu(struct net *net, struct sk_buff *skb, int proto);
> > +
> > +static int udp_queue_rcv_skb(struct sock *sk, struct sk_buff *skb)
> > +{
> > + struct sk_buff *next, *segs;
> > + int ret;
> > +
> > + if (likely(!udp_unexpected_gso(sk, skb)))
> > + return udp_queue_rcv_one_skb(sk, skb);
> > +
> > + BUILD_BUG_ON(sizeof(struct udp_skb_cb) > SKB_SGO_CB_OFFSET);
> > + __skb_push(skb, -skb_mac_offset(skb));
> > + segs = udp_rcv_segment(sk, skb);
> > + for (skb = segs; skb; skb = next) {
> > + next = skb->next;
> > + __skb_pull(skb, skb_transport_offset(skb));
> > + ret = udp_queue_rcv_one_skb(sk, skb);
>
> udp_queue_rcv_one_skb() starts with doing a xfrm4_policy_check().
> Maybe we can do this on the GSO packet instead of the segments.
> So far this code is just for handling a corner case, but this might
> change.
I thought about keeping the policy check here, but then I preferred
what looked the safest option. Perhaps we can improve with a follow-up?
Cheers,
Paolo
^ permalink raw reply
* Re: [PATCH net-next 3/4] net: phy-c45: Implement reset/suspend/resume callbacks
From: Jose Abreu @ 2018-10-22 12:47 UTC (permalink / raw)
To: Andrew Lunn, Jose Abreu, Russell King - ARM Linux
Cc: netdev, Florian Fainelli, David S. Miller, Joao Pinto
In-Reply-To: <20181022122839.GB24112@lunn.ch>
Hello,
On 22-10-2018 13:28, Andrew Lunn wrote:
>> EXPORT_SYMBOL_GPL(gen10g_resume);
>> @@ -327,7 +381,7 @@ struct phy_driver genphy_10g_driver = {
>> .phy_id = 0xffffffff,
>> .phy_id_mask = 0xffffffff,
>> .name = "Generic 10G PHY",
>> - .soft_reset = gen10g_no_soft_reset,
>> + .soft_reset = gen10g_soft_reset,
>> .config_init = gen10g_config_init,
>> .features = 0,
>> .aneg_done = genphy_c45_aneg_done,
> Hi Jose
>
> You need to be careful here. There is a reason this is called
> gen10g_no_soft_reset, rather than having an empty
> gen10g_soft_reset. Some PHYs break when you do a reset. So adding a
> gen10g_soft_reset is fine, but don't change this here, without first
> understanding the history, and talking to Russell King.
Hmm, the reset function only interacts with standard PCS
registers, which should always be available ...
>From my tests I need to do at least 1 reset during power-up so in
ultimate case I can add a feature quirk or similar.
Russell, can you please comment ?
Thanks and Best Regards,
Jose Miguel Abreu
>
> Andrew
^ permalink raw reply
* Re: [PATCH 2/2] net: stmmac: Set OWN bit for jumbo frames
From: Thor Thayer @ 2018-10-22 21:05 UTC (permalink / raw)
To: peppe.cavallaro, alexandre.torgue, joabreu, davem, dinguyen,
robh+dt, mark.rutland
Cc: devicetree, netdev, linux-kernel
In-Reply-To: <1540229352-26010-2-git-send-email-thor.thayer@linux.intel.com>
On 10/22/2018 12:29 PM, thor.thayer@linux.intel.com wrote:
> From: Thor Thayer <thor.thayer@linux.intel.com>
>
> Ping with Jumbo packet does not reply and get a watchdog timeout
>
> [ 46.059616] ------------[ cut here ]------------
> [ 46.064268] NETDEV WATCHDOG: eth0 (socfpga-dwmac): transmit queue 0 timed out
> [ 46.071471] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:461 dev_watchdog+0x2cc/0x2d8
> [ 46.079708] Modules linked in:
> [ 46.082761] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.18.0-00115-gc262be665854-dirty #264
> [ 46.091082] Hardware name: SoCFPGA Stratix 10 SoCDK (DT)
> [ 46.096377] pstate: 20000005 (nzCv daif -PAN -UAO)
> [ 46.101152] pc : dev_watchdog+0x2cc/0x2d8
> [ 46.105149] lr : dev_watchdog+0x2cc/0x2d8
> [ 46.109144] sp : ffff00000800bd80
> [ 46.112447] x29: ffff00000800bd80 x28: ffff80007a9b4940
> [ 46.117744] x27: 00000000ffffffff x26: ffff80007aa183b0
> [ 46.123040] x25: 0000000000000001 x24: 0000000000000140
> [ 46.128336] x23: ffff80007aa1839c x22: ffff80007aa17fb0
> [ 46.133632] x21: ffff80007aa18000 x20: ffff0000091a7000
> [ 46.138927] x19: 0000000000000000 x18: ffffffffffffffff
> [ 46.144223] x17: 0000000000000000 x16: 0000000000000000
> [ 46.149519] x15: ffff0000091a96c8 x14: 07740775076f0720
> [ 46.154814] x13: 07640765076d0769 x12: 0774072007300720
> [ 46.160110] x11: 0765077507650775 x10: 0771072007740769
> [ 46.165406] x9 : 076d0773076e0761 x8 : 077207740720073a
> [ 46.170702] x7 : 072907630761076d x6 : ffff80007ff9a0c0
> [ 46.175997] x5 : ffff80007ff9a0c0 x4 : 0000000000000002
> [ 46.181293] x3 : 0000000000000000 x2 : ffff0000091ac180
> [ 46.186589] x1 : e6a742ebe628e800 x0 : 0000000000000000
> [ 46.191885] Call trace:
> [ 46.194326] dev_watchdog+0x2cc/0x2d8
> [ 46.197980] call_timer_fn+0x20/0x78
> [ 46.201544] expire_timers+0xa4/0xb0
> [ 46.205108] run_timer_softirq+0xe4/0x198
> [ 46.209107] __do_softirq+0x114/0x210
> [ 46.212760] irq_exit+0xd0/0xd8
> [ 46.215895] __handle_domain_irq+0x60/0xb0
> [ 46.219977] gic_handle_irq+0x58/0xa8
> [ 46.223628] el1_irq+0xb0/0x128
> [ 46.226761] arch_cpu_idle+0x10/0x18
> [ 46.230326] do_idle+0x1d4/0x288
> [ 46.233544] cpu_startup_entry+0x24/0x28
> [ 46.237457] secondary_start_kernel+0x17c/0x1c0
> [ 46.241971] ---[ end trace 57048cd1372cd828 ]---
>
> Inspection of queue showed Jumbo packets were not sent out.
> The ring Jumbo packet function needs to set the OWN bit so
> the packet is sent.
>
> Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
> ---
> drivers/net/ethernet/stmicro/stmmac/ring_mode.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/ring_mode.c b/drivers/net/ethernet/stmicro/stmmac/ring_mode.c
> index a7ffc73fffe8..c5fd9483bd96 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/ring_mode.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/ring_mode.c
> @@ -91,7 +91,7 @@ static int jumbo_frm(void *p, struct sk_buff *skb, int csum)
> tx_q->tx_skbuff_dma[entry].is_jumbo = true;
> desc->des3 = cpu_to_le32(des2 + BUF_SIZE_4KiB);
> stmmac_prepare_tx_desc(priv, desc, 1, nopaged_len, csum,
> - STMMAC_RING_MODE, 0, true, skb->len);
> + STMMAC_RING_MODE, 1, true, skb->len);
> }
>
> tx_q->cur_tx = entry;
>
I'm seeing a similar problem with packets > 8K. I'll send out a rev2
with that fix shortly.
^ permalink raw reply
* [PATCH net-next 0/6] qed*: Doorbell overflow recovery
From: Ariel Elior @ 2018-10-22 12:27 UTC (permalink / raw)
To: davem; +Cc: netdev, Ariel Elior, Michal Kalderon, Tomer Tayar
Doorbell Overflow
If sufficient CPU cores will send doorbells at a sufficiently high rate, they
can cause an overflow in the doorbell queue block message fifo. When fill level
reaches maximum, the device stops accepting all doorbells from that PF until a
recovery procedure has taken place.
Doorbell Overflow Recovery
The recovery procedure basically means resending the last doorbell for every
doorbelling entity. A doorbelling entity is anything which may send doorbells:
L2 tx ring, rdma sq/rq/cq, light l2, vf l2 tx ring, spq, etc. This relies on
the design assumption that all doorbells are aggregative, so last doorbell
carries the information of all previous doorbells.
APIs
All doorbelling entities need to register with the mechanism before sending
doorbells. The registration entails providing the doorbell address the entity
would be using, and a virtual address where last doorbell data can be found.
Typically fastpath structures already have this construct.
Executing the recovery procedure
Handling the attentions, iterating over all the registered entities and
resending their doorbells, is all handled within qed core module.
Relevance
All doorbelling entities in all protocols need to register with the mechanism,
via the new APIs. Technically this is quite simple (just call the API). Some
protocol fastpath implementation may not have the doorbell data stored anywhere
(compute it from scratch every time) and will have to add such a place.
This is rare and is also better practice (save some cycles on the fastpath).
Performance Penalty
No performance penalty should incur as a result of this feature. If anything
performance can improve by avoiding recalcualtion of doorbell data everytime
doorbell is sent (in some flows).
Add the database used to register doorbelling entities, and APIs for adding
and deleting entries, and logic for traversing the database and doorbelling
once on behalf of all entities.
Please consider applying to net-next.
Thanks,
Ariel
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Ariel Elior (6):
qed: Add doorbell overflow recovery mechanism
qed: Use the doorbell overflow recovery mechanism in case of doorbell
overflow
qed: Register slowpath queue doorbell with doorbell overflow recovery
mechanism
qed: Register light L2 queues with doorbell overflow recovery
mechanism
qed: Expose the doorbell overflow recovery mechanism to the protocol
drivers
qede: Register l2 queues with doorbell overflow recovery mechanism
drivers/net/ethernet/qlogic/qed/qed.h | 31 ++-
drivers/net/ethernet/qlogic/qed/qed_dev.c | 334 ++++++++++++++++++++++++-
drivers/net/ethernet/qlogic/qed/qed_dev_api.h | 28 +++
drivers/net/ethernet/qlogic/qed/qed_int.c | 152 +++++++++--
drivers/net/ethernet/qlogic/qed/qed_int.h | 10 +
drivers/net/ethernet/qlogic/qed/qed_ll2.c | 30 ++-
drivers/net/ethernet/qlogic/qed/qed_ll2.h | 1 +
drivers/net/ethernet/qlogic/qed/qed_main.c | 66 ++++-
drivers/net/ethernet/qlogic/qed/qed_reg_addr.h | 50 ++++
drivers/net/ethernet/qlogic/qed/qed_sp.h | 4 +-
drivers/net/ethernet/qlogic/qed/qed_spq.c | 22 ++
drivers/net/ethernet/qlogic/qede/qede_main.c | 9 +
include/linux/qed/qed_if.h | 42 ++++
13 files changed, 744 insertions(+), 35 deletions(-)
--
1.8.3.1
^ permalink raw reply
* [PATCH net-next 5/6] qed: Expose the doorbell overflow recovery mechanism to the protocol drivers
From: Ariel Elior @ 2018-10-22 12:27 UTC (permalink / raw)
To: davem; +Cc: netdev, Ariel Elior, Michal Kalderon, Tomer Tayar
In-Reply-To: <20181022122743.20384-1-Ariel.Elior@cavium.com>
Most of the doorbelling entities are outside of the core module.
L2 queues, Roce queues, iscsi and fcoe all need to register.
Make the APIs available for these drivers.
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
---
drivers/net/ethernet/qlogic/qed/qed_main.c | 2 ++
include/linux/qed/qed_if.h | 27 +++++++++++++++++++++++++++
2 files changed, 29 insertions(+)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c
index f2c50ef..a0b761d 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_main.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_main.c
@@ -2238,6 +2238,8 @@ static int qed_read_module_eeprom(struct qed_dev *cdev, char *buf,
.update_mac = &qed_update_mac,
.update_mtu = &qed_update_mtu,
.update_wol = &qed_update_wol,
+ .db_recovery_add = &qed_db_recovery_add,
+ .db_recovery_del = &qed_db_recovery_del,
.read_module_eeprom = &qed_read_module_eeprom,
};
diff --git a/include/linux/qed/qed_if.h b/include/linux/qed/qed_if.h
index c3f9844..416d525 100644
--- a/include/linux/qed/qed_if.h
+++ b/include/linux/qed/qed_if.h
@@ -1010,6 +1010,33 @@ struct qed_common_ops {
*/
int (*set_led)(struct qed_dev *cdev,
enum qed_led_mode mode);
+/**
+ * @brief db_recovery_add - add doorbell information to the doorbell
+ * recovery mechanism.
+ *
+ * @param cdev
+ * @param db_addr - doorbell address
+ * @param db_data - address of where db_data is stored
+ * @param db_is_32b - doorbell is 32b pr 64b
+ * @param db_is_user - doorbell recovery addresses are user or kernel space
+ */
+ int (*db_recovery_add)(struct qed_dev *cdev,
+ void __iomem *db_addr,
+ void *db_data,
+ enum qed_db_rec_width db_width,
+ enum qed_db_rec_space db_space);
+
+/**
+ * @brief db_recovery_del - remove doorbell information from the doorbell
+ * recovery mechanism. db_data serves as key (db_addr is not unique).
+ *
+ * @param cdev
+ * @param db_addr - doorbell address
+ * @param db_data - address where db_data is stored. Serves as key for the
+ * entry to delete.
+ */
+ int (*db_recovery_del)(struct qed_dev *cdev,
+ void __iomem *db_addr, void *db_data);
/**
* @brief update_drv_state - API to inform the change in the driver state.
--
1.8.3.1
^ permalink raw reply related
* [PATCH net-next 3/6] qed: Register slowpath queue doorbell with doorbell overflow recovery mechanism
From: Ariel Elior @ 2018-10-22 12:27 UTC (permalink / raw)
To: davem; +Cc: netdev, Ariel Elior, Michal Kalderon, Tomer Tayar
In-Reply-To: <20181022122743.20384-1-Ariel.Elior@cavium.com>
Slow path queue is a doorbelling entity. Register it with the overflow mechanism.
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
---
drivers/net/ethernet/qlogic/qed/qed_sp.h | 4 ++-
drivers/net/ethernet/qlogic/qed/qed_spq.c | 47 +++++++++++++++++++++++--------
2 files changed, 38 insertions(+), 13 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_sp.h b/drivers/net/ethernet/qlogic/qed/qed_sp.h
index e95431f..17aa25f 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_sp.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_sp.h
@@ -224,7 +224,9 @@ struct qed_spq {
u32 comp_count;
u32 cid;
- qed_spq_async_comp_cb async_comp_cb[MAX_PROTOCOL_TYPE];
+ u32 db_addr_offset;
+ struct core_db_data db_data;
+ qed_spq_async_comp_cb async_comp_cb[MAX_PROTOCOL_TYPE];
};
/**
diff --git a/drivers/net/ethernet/qlogic/qed/qed_spq.c b/drivers/net/ethernet/qlogic/qed/qed_spq.c
index c4a6274..29039bb 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_spq.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_spq.c
@@ -254,9 +254,9 @@ static int qed_spq_hw_post(struct qed_hwfn *p_hwfn,
struct qed_spq *p_spq, struct qed_spq_entry *p_ent)
{
struct qed_chain *p_chain = &p_hwfn->p_spq->chain;
+ struct core_db_data *p_db_data = &p_spq->db_data;
u16 echo = qed_chain_get_prod_idx(p_chain);
struct slow_path_element *elem;
- struct core_db_data db;
p_ent->elem.hdr.echo = cpu_to_le16(echo);
elem = qed_chain_produce(p_chain);
@@ -268,27 +268,22 @@ static int qed_spq_hw_post(struct qed_hwfn *p_hwfn,
*elem = p_ent->elem; /* struct assignment */
/* send a doorbell on the slow hwfn session */
- memset(&db, 0, sizeof(db));
- SET_FIELD(db.params, CORE_DB_DATA_DEST, DB_DEST_XCM);
- SET_FIELD(db.params, CORE_DB_DATA_AGG_CMD, DB_AGG_CMD_SET);
- SET_FIELD(db.params, CORE_DB_DATA_AGG_VAL_SEL,
- DQ_XCM_CORE_SPQ_PROD_CMD);
- db.agg_flags = DQ_XCM_CORE_DQ_CF_CMD;
- db.spq_prod = cpu_to_le16(qed_chain_get_prod_idx(p_chain));
+ p_db_data->spq_prod = cpu_to_le16(qed_chain_get_prod_idx(p_chain));
/* make sure the SPQE is updated before the doorbell */
wmb();
- DOORBELL(p_hwfn, qed_db_addr(p_spq->cid, DQ_DEMS_LEGACY), *(u32 *)&db);
+ DOORBELL(p_hwfn, p_spq->db_addr_offset, *(u32 *) p_db_data);
/* make sure doorbell is rang */
wmb();
DP_VERBOSE(p_hwfn, QED_MSG_SPQ,
"Doorbelled [0x%08x, CID 0x%08x] with Flags: %02x agg_params: %02x, prod: %04x\n",
- qed_db_addr(p_spq->cid, DQ_DEMS_LEGACY),
- p_spq->cid, db.params, db.agg_flags,
- qed_chain_get_prod_idx(p_chain));
+ p_spq->db_addr_offset,
+ p_spq->cid,
+ p_db_data->params,
+ p_db_data->agg_flags, qed_chain_get_prod_idx(p_chain));
return 0;
}
@@ -492,8 +487,11 @@ void qed_spq_setup(struct qed_hwfn *p_hwfn)
{
struct qed_spq *p_spq = p_hwfn->p_spq;
struct qed_spq_entry *p_virt = NULL;
+ struct core_db_data *p_db_data;
+ void __iomem *db_addr;
dma_addr_t p_phys = 0;
u32 i, capacity;
+ int rc;
INIT_LIST_HEAD(&p_spq->pending);
INIT_LIST_HEAD(&p_spq->completion_pending);
@@ -530,6 +528,25 @@ void qed_spq_setup(struct qed_hwfn *p_hwfn)
/* reset the chain itself */
qed_chain_reset(&p_spq->chain);
+
+ /* Initialize the address/data of the SPQ doorbell */
+ p_spq->db_addr_offset = qed_db_addr(p_spq->cid, DQ_DEMS_LEGACY);
+ p_db_data = &p_spq->db_data;
+ memset(p_db_data, 0, sizeof(*p_db_data));
+ SET_FIELD(p_db_data->params, CORE_DB_DATA_DEST, DB_DEST_XCM);
+ SET_FIELD(p_db_data->params, CORE_DB_DATA_AGG_CMD, DB_AGG_CMD_MAX);
+ SET_FIELD(p_db_data->params, CORE_DB_DATA_AGG_VAL_SEL,
+ DQ_XCM_CORE_SPQ_PROD_CMD);
+ p_db_data->agg_flags = DQ_XCM_CORE_DQ_CF_CMD;
+
+ /* Register the SPQ doorbell with the doorbell recovery mechanism */
+ db_addr = (void __iomem *)((u8 __iomem *)p_hwfn->doorbells +
+ p_spq->db_addr_offset);
+ rc = qed_db_recovery_add(p_hwfn->cdev, db_addr, &p_spq->db_data,
+ DB_REC_WIDTH_32B, DB_REC_KERNEL);
+ if (rc)
+ DP_INFO(p_hwfn,
+ "Failed to register the SPQ doorbell with the doorbell recovery mechanism\n");
}
int qed_spq_alloc(struct qed_hwfn *p_hwfn)
@@ -577,11 +594,17 @@ int qed_spq_alloc(struct qed_hwfn *p_hwfn)
void qed_spq_free(struct qed_hwfn *p_hwfn)
{
struct qed_spq *p_spq = p_hwfn->p_spq;
+ void __iomem *db_addr;
u32 capacity;
if (!p_spq)
return;
+ /* Delete the SPQ doorbell from the doorbell recovery mechanism */
+ db_addr = (void __iomem *)((u8 __iomem *) p_hwfn->doorbells +
+ p_spq->db_addr_offset);
+ qed_db_recovery_del(p_hwfn->cdev, db_addr, &p_spq->db_data);
+
if (p_spq->p_virt) {
capacity = qed_chain_get_capacity(&p_spq->chain);
dma_free_coherent(&p_hwfn->cdev->pdev->dev,
--
1.8.3.1
^ permalink raw reply related
* [PATCH net-next 6/6] qede: Register l2 queues with doorbell overflow recovery mechanism
From: Ariel Elior @ 2018-10-22 12:27 UTC (permalink / raw)
To: davem; +Cc: netdev, Ariel Elior, Michal Kalderon, Tomer Tayar
In-Reply-To: <20181022122743.20384-1-Ariel.Elior@cavium.com>
All L2 queues funnel through this flow, so this would cover the
regular RSS queues, as well queues created for VFs, mqos queues,
xdp queues, etc.
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
---
drivers/net/ethernet/qlogic/qede/qede_main.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c
index 46d0f2e..1c4cea8 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_main.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_main.c
@@ -1774,6 +1774,10 @@ static int qede_drain_txq(struct qede_dev *edev,
static int qede_stop_txq(struct qede_dev *edev,
struct qede_tx_queue *txq, int rss_id)
{
+ /* delete doorbell from doorbell recovery mechanism */
+ edev->ops->common->db_recovery_del(edev->cdev, txq->doorbell_addr,
+ &txq->tx_db);
+
return edev->ops->q_tx_stop(edev->cdev, rss_id, txq->handle);
}
@@ -1910,6 +1914,11 @@ static int qede_start_txq(struct qede_dev *edev,
DQ_XCM_ETH_TX_BD_PROD_CMD);
txq->tx_db.data.agg_flags = DQ_XCM_ETH_DQ_CF_CMD;
+ /* register doorbell with doorbell recovery mechanism */
+ rc = edev->ops->common->db_recovery_add(edev->cdev, txq->doorbell_addr,
+ &txq->tx_db, DB_REC_WIDTH_32B,
+ DB_REC_KERNEL);
+
return rc;
}
--
1.8.3.1
^ permalink raw reply related
* [PATCH net-next 4/6] qed: Register light L2 queues with doorbell overflow recovery mechanism
From: Ariel Elior @ 2018-10-22 12:27 UTC (permalink / raw)
To: davem; +Cc: netdev, Ariel Elior, Michal Kalderon, Tomer Tayar
In-Reply-To: <20181022122743.20384-1-Ariel.Elior@cavium.com>
Light L2 queues are doorbelling entities. Modify the implementation
to keep the doorbell data necessary for doorbelling in well known
location instead of recomputing every time. Register the LL2 queue
with doorbell recovery mechanism.
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
---
drivers/net/ethernet/qlogic/qed/qed_ll2.c | 30 ++++++++++++++++++++----------
drivers/net/ethernet/qlogic/qed/qed_ll2.h | 1 +
2 files changed, 21 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_ll2.c b/drivers/net/ethernet/qlogic/qed/qed_ll2.c
index aa63338..504c8f7 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_ll2.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_ll2.c
@@ -1085,7 +1085,14 @@ static int qed_sp_ll2_tx_queue_start(struct qed_hwfn *p_hwfn,
p_ramrod->gsi_offload_flag = p_ll2_conn->input.gsi_enable;
- return qed_spq_post(p_hwfn, p_ent, NULL);
+ rc = qed_spq_post(p_hwfn, p_ent, NULL);
+ if (rc)
+ return rc;
+
+ rc = qed_db_recovery_add(p_hwfn->cdev, p_tx->doorbell_addr,
+ &p_tx->db_msg, DB_REC_WIDTH_32B,
+ DB_REC_KERNEL);
+ return rc;
}
static int qed_sp_ll2_rx_queue_stop(struct qed_hwfn *p_hwfn,
@@ -1119,9 +1126,11 @@ static int qed_sp_ll2_rx_queue_stop(struct qed_hwfn *p_hwfn,
static int qed_sp_ll2_tx_queue_stop(struct qed_hwfn *p_hwfn,
struct qed_ll2_info *p_ll2_conn)
{
+ struct qed_ll2_tx_queue *p_tx = &p_ll2_conn->tx_queue;
struct qed_spq_entry *p_ent = NULL;
struct qed_sp_init_data init_data;
int rc = -EINVAL;
+ qed_db_recovery_del(p_hwfn->cdev, p_tx->doorbell_addr, &p_tx->db_msg);
/* Get SPQ entry */
memset(&init_data, 0, sizeof(init_data));
@@ -1542,6 +1551,13 @@ int qed_ll2_establish_connection(void *cxt, u8 connection_handle)
p_tx->doorbell_addr = (u8 __iomem *)p_hwfn->doorbells +
qed_db_addr(p_ll2_conn->cid,
DQ_DEMS_LEGACY);
+ /* prepare db data */
+ SET_FIELD(p_tx->db_msg.params, CORE_DB_DATA_DEST, DB_DEST_XCM);
+ SET_FIELD(p_tx->db_msg.params, CORE_DB_DATA_AGG_CMD, DB_AGG_CMD_SET);
+ SET_FIELD(p_tx->db_msg.params, CORE_DB_DATA_AGG_VAL_SEL,
+ DQ_XCM_CORE_TX_BD_PROD_CMD);
+ p_tx->db_msg.agg_flags = DQ_XCM_CORE_DQ_CF_CMD;
+
rc = qed_ll2_establish_connection_rx(p_hwfn, p_ll2_conn);
if (rc)
@@ -1780,7 +1796,6 @@ static void qed_ll2_tx_packet_notify(struct qed_hwfn *p_hwfn,
bool b_notify = p_ll2_conn->tx_queue.cur_send_packet->notify_fw;
struct qed_ll2_tx_queue *p_tx = &p_ll2_conn->tx_queue;
struct qed_ll2_tx_packet *p_pkt = NULL;
- struct core_db_data db_msg = { 0, 0, 0 };
u16 bd_prod;
/* If there are missing BDs, don't do anything now */
@@ -1809,24 +1824,19 @@ static void qed_ll2_tx_packet_notify(struct qed_hwfn *p_hwfn,
list_move_tail(&p_pkt->list_entry, &p_tx->active_descq);
}
- SET_FIELD(db_msg.params, CORE_DB_DATA_DEST, DB_DEST_XCM);
- SET_FIELD(db_msg.params, CORE_DB_DATA_AGG_CMD, DB_AGG_CMD_SET);
- SET_FIELD(db_msg.params, CORE_DB_DATA_AGG_VAL_SEL,
- DQ_XCM_CORE_TX_BD_PROD_CMD);
- db_msg.agg_flags = DQ_XCM_CORE_DQ_CF_CMD;
- db_msg.spq_prod = cpu_to_le16(bd_prod);
+ p_tx->db_msg.spq_prod = cpu_to_le16(bd_prod);
/* Make sure the BDs data is updated before ringing the doorbell */
wmb();
- DIRECT_REG_WR(p_tx->doorbell_addr, *((u32 *)&db_msg));
+ DIRECT_REG_WR(p_tx->doorbell_addr, *((u32 *)&p_tx->db_msg));
DP_VERBOSE(p_hwfn,
(NETIF_MSG_TX_QUEUED | QED_MSG_LL2),
"LL2 [q 0x%02x cid 0x%08x type 0x%08x] Doorbelled [producer 0x%04x]\n",
p_ll2_conn->queue_id,
p_ll2_conn->cid,
- p_ll2_conn->input.conn_type, db_msg.spq_prod);
+ p_ll2_conn->input.conn_type, p_tx->db_msg.spq_prod);
}
int qed_ll2_prepare_tx_packet(void *cxt,
diff --git a/drivers/net/ethernet/qlogic/qed/qed_ll2.h b/drivers/net/ethernet/qlogic/qed/qed_ll2.h
index 1a5c1ae..5f01fbd 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_ll2.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_ll2.h
@@ -103,6 +103,7 @@ struct qed_ll2_tx_queue {
struct qed_ll2_tx_packet cur_completing_packet;
u16 cur_completing_bd_idx;
void __iomem *doorbell_addr;
+ struct core_db_data db_msg;
u16 bds_idx;
u16 cur_send_frag_num;
u16 cur_completing_frag_num;
--
1.8.3.1
^ permalink raw reply related
* [PATCH net-next 2/6] qed: Use the doorbell overflow recovery mechanism in case of doorbell overflow
From: Ariel Elior @ 2018-10-22 12:27 UTC (permalink / raw)
To: davem; +Cc: netdev, Ariel Elior, Michal Kalderon, Tomer Tayar
In-Reply-To: <20181022122743.20384-1-Ariel.Elior@cavium.com>
In case of an attention from the doorbell queue block, analyze the HW
indications. In case of a doorbell overflow, execute a doorbell recovery.
Since there can be spurious indications (race conditions between multiple PFs),
schedule a periodic task for checking whether a doorbell overflow may have been
missed. After a set time with no indications, terminate the periodic task.
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
---
drivers/net/ethernet/qlogic/qed/qed.h | 14 ++-
drivers/net/ethernet/qlogic/qed/qed_dev.c | 14 ++-
drivers/net/ethernet/qlogic/qed/qed_int.c | 152 ++++++++++++++++++++++---
drivers/net/ethernet/qlogic/qed/qed_int.h | 10 ++
drivers/net/ethernet/qlogic/qed/qed_main.c | 64 ++++++++++-
drivers/net/ethernet/qlogic/qed/qed_reg_addr.h | 50 ++++++++
6 files changed, 280 insertions(+), 24 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed.h b/drivers/net/ethernet/qlogic/qed/qed.h
index 882279e..a053062 100644
--- a/drivers/net/ethernet/qlogic/qed/qed.h
+++ b/drivers/net/ethernet/qlogic/qed/qed.h
@@ -536,6 +536,7 @@ struct qed_simd_fp_handler {
enum qed_slowpath_wq_flag {
QED_SLOWPATH_MFW_TLV_REQ,
+ QED_SLOWPATH_PERIODIC_DB_REC,
};
struct qed_hwfn {
@@ -669,11 +670,12 @@ struct qed_hwfn {
struct delayed_work iov_task;
unsigned long iov_task_flags;
#endif
-
- struct z_stream_s *stream;
+ struct z_stream_s *stream;
+ bool slowpath_wq_active;
struct workqueue_struct *slowpath_wq;
struct delayed_work slowpath_task;
unsigned long slowpath_task_flags;
+ u32 periodic_db_rec_count;
};
struct pci_params {
@@ -914,6 +916,12 @@ void qed_set_fw_mac_addr(__le16 *fw_msb,
#define QED_LEADING_HWFN(dev) (&dev->hwfns[0])
+/* doorbell recovery mechanism */
+void qed_db_recovery_dp(struct qed_hwfn *p_hwfn);
+void qed_db_recovery_execute(struct qed_hwfn *p_hwfn,
+ enum qed_db_rec_exec db_exec);
+bool qed_edpm_enabled(struct qed_hwfn *p_hwfn);
+
/* Other Linux specific common definitions */
#define DP_NAME(cdev) ((cdev)->name)
@@ -948,4 +956,6 @@ int qed_mfw_fill_tlv_data(struct qed_hwfn *hwfn,
union qed_mfw_tlv_data *tlv_data);
void qed_hw_info_set_offload_tc(struct qed_hw_info *p_info, u8 tc);
+
+void qed_periodic_db_rec_start(struct qed_hwfn *p_hwfn);
#endif /* _QED_H */
diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c
index 9cdc267..aae5114 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_dev.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c
@@ -1759,6 +1759,14 @@ enum QED_ROCE_EDPM_MODE {
QED_ROCE_EDPM_MODE_DISABLE = 2,
};
+bool qed_edpm_enabled(struct qed_hwfn *p_hwfn)
+{
+ if (p_hwfn->dcbx_no_edpm || p_hwfn->db_bar_no_edpm)
+ return false;
+
+ return true;
+}
+
static int
qed_hw_init_pf_doorbell_bar(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
{
@@ -1828,13 +1836,13 @@ enum QED_ROCE_EDPM_MODE {
p_hwfn->wid_count = (u16) n_cpus;
DP_INFO(p_hwfn,
- "doorbell bar: normal_region_size=%d, pwm_region_size=%d, dpi_size=%d, dpi_count=%d, roce_edpm=%s\n",
+ "doorbell bar: normal_region_size=%d, pwm_region_size=%d, dpi_size=%d, dpi_count=%d, roce_edpm=%s, page_size=%lu\n",
norm_regsize,
pwm_regsize,
p_hwfn->dpi_size,
p_hwfn->dpi_count,
- ((p_hwfn->dcbx_no_edpm) || (p_hwfn->db_bar_no_edpm)) ?
- "disabled" : "enabled");
+ (!qed_edpm_enabled(p_hwfn)) ?
+ "disabled" : "enabled", PAGE_SIZE);
if (rc) {
DP_ERR(p_hwfn,
diff --git a/drivers/net/ethernet/qlogic/qed/qed_int.c b/drivers/net/ethernet/qlogic/qed/qed_int.c
index af3a28e..0fe44a6 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_int.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_int.c
@@ -361,29 +361,147 @@ static int qed_pglub_rbc_attn_cb(struct qed_hwfn *p_hwfn)
return 0;
}
-#define QED_DORQ_ATTENTION_REASON_MASK (0xfffff)
-#define QED_DORQ_ATTENTION_OPAQUE_MASK (0xffff)
-#define QED_DORQ_ATTENTION_SIZE_MASK (0x7f)
-#define QED_DORQ_ATTENTION_SIZE_SHIFT (16)
+#define QED_DORQ_ATTENTION_REASON_MASK (0xfffff)
+#define QED_DORQ_ATTENTION_OPAQUE_MASK (0xffff)
+#define QED_DORQ_ATTENTION_OPAQUE_SHIFT (0x0)
+#define QED_DORQ_ATTENTION_SIZE_MASK (0x7f)
+#define QED_DORQ_ATTENTION_SIZE_SHIFT (16)
+
+#define QED_DB_REC_COUNT 1000
+#define QED_DB_REC_INTERVAL 100
+
+static int qed_db_rec_flush_queue(struct qed_hwfn *p_hwfn,
+ struct qed_ptt *p_ptt)
+{
+ u32 count = QED_DB_REC_COUNT;
+ u32 usage = 1;
+
+ /* Wait for usage to zero or count to run out. This is necessary since
+ * EDPM doorbell transactions can take multiple 64b cycles, and as such
+ * can "split" over the pci. Possibly, the doorbell drop can happen with
+ * half an EDPM in the queue and other half dropped. Another EDPM
+ * doorbell to the same address (from doorbell recovery mechanism or
+ * from the doorbelling entity) could have first half dropped and second
+ * half interpreted as continuation of the first. To prevent such
+ * malformed doorbells from reaching the device, flush the queue before
+ * releasing the overflow sticky indication.
+ */
+ while (count-- && usage) {
+ usage = qed_rd(p_hwfn, p_ptt, DORQ_REG_PF_USAGE_CNT);
+ udelay(QED_DB_REC_INTERVAL);
+ }
+
+ /* should have been depleted by now */
+ if (usage) {
+ DP_NOTICE(p_hwfn->cdev,
+ "DB recovery: doorbell usage failed to zero after %d usec. usage was %x\n",
+ QED_DB_REC_INTERVAL * QED_DB_REC_COUNT, usage);
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+int qed_db_rec_handler(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
+{
+ u32 overflow;
+ int rc;
+
+ overflow = qed_rd(p_hwfn, p_ptt, DORQ_REG_PF_OVFL_STICKY);
+ DP_NOTICE(p_hwfn, "PF Overflow sticky 0x%x\n", overflow);
+ if (!overflow) {
+ qed_db_recovery_execute(p_hwfn, DB_REC_ONCE);
+ return 0;
+ }
+
+ if (qed_edpm_enabled(p_hwfn)) {
+ rc = qed_db_rec_flush_queue(p_hwfn, p_ptt);
+ if (rc)
+ return rc;
+ }
+
+ /* Flush any pending (e)dpm as they may never arrive */
+ qed_wr(p_hwfn, p_ptt, DORQ_REG_DPM_FORCE_ABORT, 0x1);
+
+ /* Release overflow sticky indication (stop silently dropping everything) */
+ qed_wr(p_hwfn, p_ptt, DORQ_REG_PF_OVFL_STICKY, 0x0);
+
+ /* Repeat all last doorbells (doorbell drop recovery) */
+ qed_db_recovery_execute(p_hwfn, DB_REC_REAL_DEAL);
+
+ return 0;
+}
+
static int qed_dorq_attn_cb(struct qed_hwfn *p_hwfn)
{
- u32 reason;
+ u32 int_sts, first_drop_reason, details, address, all_drops_reason;
+ struct qed_ptt *p_ptt = p_hwfn->p_dpc_ptt;
+ int rc;
- reason = qed_rd(p_hwfn, p_hwfn->p_dpc_ptt, DORQ_REG_DB_DROP_REASON) &
- QED_DORQ_ATTENTION_REASON_MASK;
- if (reason) {
- u32 details = qed_rd(p_hwfn, p_hwfn->p_dpc_ptt,
- DORQ_REG_DB_DROP_DETAILS);
+ int_sts = qed_rd(p_hwfn, p_ptt, DORQ_REG_INT_STS);
+ DP_NOTICE(p_hwfn->cdev, "DORQ attention. int_sts was %x\n", int_sts);
- DP_INFO(p_hwfn->cdev,
- "DORQ db_drop: address 0x%08x Opaque FID 0x%04x Size [bytes] 0x%08x Reason: 0x%08x\n",
- qed_rd(p_hwfn, p_hwfn->p_dpc_ptt,
- DORQ_REG_DB_DROP_DETAILS_ADDRESS),
- (u16)(details & QED_DORQ_ATTENTION_OPAQUE_MASK),
- GET_FIELD(details, QED_DORQ_ATTENTION_SIZE) * 4,
- reason);
+ /* int_sts may be zero since all PFs were interrupted for doorbell
+ * overflow but another one already handled it. Can abort here. If
+ * This PF also requires overflow recovery we will be interrupted again.
+ * The masked almost full indication may also be set. Ignoring.
+ */
+ if (!(int_sts & ~DORQ_REG_INT_STS_DORQ_FIFO_AFULL))
+ return 0;
+
+ /* check if db_drop or overflow happened */
+ if (int_sts & (DORQ_REG_INT_STS_DB_DROP |
+ DORQ_REG_INT_STS_DORQ_FIFO_OVFL_ERR)) {
+ /* Obtain data about db drop/overflow */
+ first_drop_reason = qed_rd(p_hwfn, p_ptt,
+ DORQ_REG_DB_DROP_REASON) &
+ QED_DORQ_ATTENTION_REASON_MASK;
+ details = qed_rd(p_hwfn, p_ptt, DORQ_REG_DB_DROP_DETAILS);
+ address = qed_rd(p_hwfn, p_ptt,
+ DORQ_REG_DB_DROP_DETAILS_ADDRESS);
+ all_drops_reason = qed_rd(p_hwfn, p_ptt,
+ DORQ_REG_DB_DROP_DETAILS_REASON);
+
+ /* Log info */
+ DP_NOTICE(p_hwfn->cdev,
+ "Doorbell drop occurred\n"
+ "Address\t\t0x%08x\t(second BAR address)\n"
+ "FID\t\t0x%04x\t\t(Opaque FID)\n"
+ "Size\t\t0x%04x\t\t(in bytes)\n"
+ "1st drop reason\t0x%08x\t(details on first drop since last handling)\n"
+ "Sticky reasons\t0x%08x\t(all drop reasons since last handling)\n",
+ address,
+ GET_FIELD(details, QED_DORQ_ATTENTION_OPAQUE),
+ GET_FIELD(details, QED_DORQ_ATTENTION_SIZE) * 4,
+ first_drop_reason, all_drops_reason);
+
+ rc = qed_db_rec_handler(p_hwfn, p_ptt);
+ qed_periodic_db_rec_start(p_hwfn);
+ if (rc)
+ return rc;
+
+ /* Clear the doorbell drop details and prepare for next drop */
+ qed_wr(p_hwfn, p_ptt, DORQ_REG_DB_DROP_DETAILS_REL, 0);
+
+ /* Mark interrupt as handled (note: even if drop was due to a different
+ * reason than overflow we mark as handled)
+ */
+ qed_wr(p_hwfn,
+ p_ptt,
+ DORQ_REG_INT_STS_WR,
+ DORQ_REG_INT_STS_DB_DROP |
+ DORQ_REG_INT_STS_DORQ_FIFO_OVFL_ERR);
+
+ /* If there are no indications other than drop indications, success */
+ if ((int_sts & ~(DORQ_REG_INT_STS_DB_DROP |
+ DORQ_REG_INT_STS_DORQ_FIFO_OVFL_ERR |
+ DORQ_REG_INT_STS_DORQ_FIFO_AFULL)) == 0)
+ return 0;
}
+ /* Some other indication was present - non recoverable */
+ DP_INFO(p_hwfn, "DORQ fatal attention\n");
+
return -EINVAL;
}
diff --git a/drivers/net/ethernet/qlogic/qed/qed_int.h b/drivers/net/ethernet/qlogic/qed/qed_int.h
index 54b4ee0..d81a62e 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_int.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_int.h
@@ -190,6 +190,16 @@ void qed_int_get_num_sbs(struct qed_hwfn *p_hwfn,
*/
void qed_int_disable_post_isr_release(struct qed_dev *cdev);
+/**
+ * @brief - Doorbell Recovery handler.
+ * Run DB_REAL_DEAL doorbell recovery in case of PF overflow
+ * (and flush DORQ if needed), otherwise run DB_REC_ONCE.
+ *
+ * @param p_hwfn
+ * @param p_ptt
+ */
+int qed_db_rec_handler(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt);
+
#define QED_CAU_DEF_RX_TIMER_RES 0
#define QED_CAU_DEF_TX_TIMER_RES 0
diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c
index 75d217a..f2c50ef 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_main.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_main.c
@@ -965,9 +965,47 @@ static void qed_update_pf_params(struct qed_dev *cdev,
}
}
+#define QED_PERIODIC_DB_REC_COUNT 100
+#define QED_PERIODIC_DB_REC_INTERVAL_MS 100
+#define QED_PERIODIC_DB_REC_INTERVAL \
+ msecs_to_jiffies(QED_PERIODIC_DB_REC_INTERVAL_MS)
+#define QED_PERIODIC_DB_REC_WAIT_COUNT 10
+#define QED_PERIODIC_DB_REC_WAIT_INTERVAL \
+ (QED_PERIODIC_DB_REC_INTERVAL_MS / QED_PERIODIC_DB_REC_WAIT_COUNT)
+
+static int qed_slowpath_delayed_work(struct qed_hwfn *hwfn,
+ enum qed_slowpath_wq_flag wq_flag,
+ unsigned long delay)
+{
+ if (!hwfn->slowpath_wq_active)
+ return -EINVAL;
+
+ /* Memory barrier for setting atomic bit */
+ smp_mb__before_atomic();
+ set_bit(wq_flag, &hwfn->slowpath_task_flags);
+ smp_mb__after_atomic();
+ queue_delayed_work(hwfn->slowpath_wq, &hwfn->slowpath_task, delay);
+
+ return 0;
+}
+
+void qed_periodic_db_rec_start(struct qed_hwfn *p_hwfn)
+{
+ /* Reset periodic Doorbell Recovery counter */
+ p_hwfn->periodic_db_rec_count = QED_PERIODIC_DB_REC_COUNT;
+
+ /* Don't schedule periodic Doorbell Recovery if already scheduled */
+ if (test_bit(QED_SLOWPATH_PERIODIC_DB_REC,
+ &p_hwfn->slowpath_task_flags))
+ return;
+
+ qed_slowpath_delayed_work(p_hwfn, QED_SLOWPATH_PERIODIC_DB_REC,
+ QED_PERIODIC_DB_REC_INTERVAL);
+}
+
static void qed_slowpath_wq_stop(struct qed_dev *cdev)
{
- int i;
+ int i, sleep_count = QED_PERIODIC_DB_REC_WAIT_COUNT;
if (IS_VF(cdev))
return;
@@ -976,6 +1014,15 @@ static void qed_slowpath_wq_stop(struct qed_dev *cdev)
if (!cdev->hwfns[i].slowpath_wq)
continue;
+ /* Stop queuing new delayed works */
+ cdev->hwfns[i].slowpath_wq_active = false;
+
+ /* Wait until the last periodic doorbell recovery is executed */
+ while (test_bit(QED_SLOWPATH_PERIODIC_DB_REC,
+ &cdev->hwfns[i].slowpath_task_flags) &&
+ sleep_count--)
+ msleep(QED_PERIODIC_DB_REC_WAIT_INTERVAL);
+
flush_workqueue(cdev->hwfns[i].slowpath_wq);
destroy_workqueue(cdev->hwfns[i].slowpath_wq);
}
@@ -988,7 +1035,10 @@ static void qed_slowpath_task(struct work_struct *work)
struct qed_ptt *ptt = qed_ptt_acquire(hwfn);
if (!ptt) {
- queue_delayed_work(hwfn->slowpath_wq, &hwfn->slowpath_task, 0);
+ if (hwfn->slowpath_wq_active)
+ queue_delayed_work(hwfn->slowpath_wq,
+ &hwfn->slowpath_task, 0);
+
return;
}
@@ -996,6 +1046,15 @@ static void qed_slowpath_task(struct work_struct *work)
&hwfn->slowpath_task_flags))
qed_mfw_process_tlv_req(hwfn, ptt);
+ if (test_and_clear_bit(QED_SLOWPATH_PERIODIC_DB_REC,
+ &hwfn->slowpath_task_flags)) {
+ qed_db_rec_handler(hwfn, ptt);
+ if (hwfn->periodic_db_rec_count--)
+ qed_slowpath_delayed_work(hwfn,
+ QED_SLOWPATH_PERIODIC_DB_REC,
+ QED_PERIODIC_DB_REC_INTERVAL);
+ }
+
qed_ptt_release(hwfn, ptt);
}
@@ -1022,6 +1081,7 @@ static int qed_slowpath_wq_start(struct qed_dev *cdev)
}
INIT_DELAYED_WORK(&hwfn->slowpath_task, qed_slowpath_task);
+ hwfn->slowpath_wq_active = true;
}
return 0;
diff --git a/drivers/net/ethernet/qlogic/qed/qed_reg_addr.h b/drivers/net/ethernet/qlogic/qed/qed_reg_addr.h
index 2440970..8939ed6 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_reg_addr.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_reg_addr.h
@@ -1243,6 +1243,56 @@
0x1701534UL
#define TSEM_REG_DBG_FORCE_FRAME \
0x1701538UL
+#define DORQ_REG_PF_USAGE_CNT \
+ 0x1009c0UL
+#define DORQ_REG_PF_OVFL_STICKY \
+ 0x1009d0UL
+#define DORQ_REG_DPM_FORCE_ABORT \
+ 0x1009d8UL
+#define DORQ_REG_INT_STS \
+ 0x100180UL
+#define DORQ_REG_INT_STS_ADDRESS_ERROR \
+ (0x1UL << 0)
+#define DORQ_REG_INT_STS_WR \
+ 0x100188UL
+#define DORQ_REG_DB_DROP_DETAILS_REL \
+ 0x100a28UL
+#define DORQ_REG_INT_STS_ADDRESS_ERROR_SHIFT \
+ 0
+#define DORQ_REG_INT_STS_DB_DROP \
+ (0x1UL << 1)
+#define DORQ_REG_INT_STS_DB_DROP_SHIFT \
+ 1
+#define DORQ_REG_INT_STS_DORQ_FIFO_OVFL_ERR \
+ (0x1UL << 2)
+#define DORQ_REG_INT_STS_DORQ_FIFO_OVFL_ERR_SHIFT \
+ 2
+#define DORQ_REG_INT_STS_DORQ_FIFO_AFULL\
+ (0x1UL << 3)
+#define DORQ_REG_INT_STS_DORQ_FIFO_AFULL_SHIFT \
+ 3
+#define DORQ_REG_INT_STS_CFC_BYP_VALIDATION_ERR \
+ (0x1UL << 4)
+#define DORQ_REG_INT_STS_CFC_BYP_VALIDATION_ERR_SHIFT \
+ 4
+#define DORQ_REG_INT_STS_CFC_LD_RESP_ERR \
+ (0x1UL << 5)
+#define DORQ_REG_INT_STS_CFC_LD_RESP_ERR_SHIFT \
+ 5
+#define DORQ_REG_INT_STS_XCM_DONE_CNT_ERR \
+ (0x1UL << 6)
+#define DORQ_REG_INT_STS_XCM_DONE_CNT_ERR_SHIFT \
+ 6
+#define DORQ_REG_INT_STS_CFC_LD_REQ_FIFO_OVFL_ERR \
+ (0x1UL << 7)
+#define DORQ_REG_INT_STS_CFC_LD_REQ_FIFO_OVFL_ERR_SHIFT \
+ 7
+#define DORQ_REG_INT_STS_CFC_LD_REQ_FIFO_UNDER_ERR \
+ (0x1UL << 8)
+#define DORQ_REG_INT_STS_CFC_LD_REQ_FIFO_UNDER_ERR_SHIFT \
+ 8
+#define DORQ_REG_DB_DROP_DETAILS_REASON \
+ 0x100a20UL
#define MSEM_REG_DBG_SELECT \
0x1801528UL
#define MSEM_REG_DBG_DWORD_ENABLE \
--
1.8.3.1
^ permalink raw reply related
* [PATCH net-next 1/6] qed: Add doorbell overflow recovery mechanism
From: Ariel Elior @ 2018-10-22 12:27 UTC (permalink / raw)
To: davem; +Cc: netdev, Ariel Elior, Michal Kalderon, Tomer Tayar
In-Reply-To: <20181022122743.20384-1-Ariel.Elior@cavium.com>
Add the database used to register doorbelling entities, and APIs for adding
and deleting entries, and logic for traversing the database and doorbelling
once on behalf of all entities.
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
---
drivers/net/ethernet/qlogic/qed/qed.h | 17 ++
drivers/net/ethernet/qlogic/qed/qed_dev.c | 320 ++++++++++++++++++++++++++
drivers/net/ethernet/qlogic/qed/qed_dev_api.h | 28 +++
include/linux/qed/qed_if.h | 15 ++
4 files changed, 380 insertions(+)
diff --git a/drivers/net/ethernet/qlogic/qed/qed.h b/drivers/net/ethernet/qlogic/qed/qed.h
index 5f0962d..882279e 100644
--- a/drivers/net/ethernet/qlogic/qed/qed.h
+++ b/drivers/net/ethernet/qlogic/qed/qed.h
@@ -296,6 +296,12 @@ enum qed_wol_support {
QED_WOL_SUPPORT_PME,
};
+enum qed_db_rec_exec {
+ DB_REC_DRY_RUN,
+ DB_REC_REAL_DEAL,
+ DB_REC_ONCE,
+};
+
struct qed_hw_info {
/* PCI personality */
enum qed_pci_personality personality;
@@ -425,6 +431,14 @@ struct qed_qm_info {
u8 num_pf_rls;
};
+struct qed_db_recovery_info {
+ struct list_head list;
+
+ /* Lock to protect the doorbell recovery mechanism list */
+ spinlock_t lock;
+ u32 db_recovery_counter;
+};
+
struct storm_stats {
u32 address;
u32 len;
@@ -640,6 +654,9 @@ struct qed_hwfn {
/* L2-related */
struct qed_l2_info *p_l2_info;
+ /* Mechanism for recovering from doorbell drop */
+ struct qed_db_recovery_info db_recovery_info;
+
/* Nvm images number and attributes */
struct qed_nvm_image_info nvm_info;
diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c
index 7ceb2b9..9cdc267 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_dev.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c
@@ -66,6 +66,318 @@
static DEFINE_SPINLOCK(qm_lock);
+/******************** Doorbell Recovery *******************/
+/* The doorbell recovery mechanism consists of a list of entries which represent
+ * doorbelling entities (l2 queues, roce sq/rq/cqs, the slowpath spq, etc). Each
+ * entity needs to register with the mechanism and provide the parameters
+ * describing it's doorbell, including a location where last used doorbell data
+ * can be found. The doorbell execute function will traverse the list and
+ * doorbell all of the registered entries.
+ */
+struct qed_db_recovery_entry {
+ struct list_head list_entry;
+ void __iomem *db_addr;
+ void *db_data;
+ enum qed_db_rec_width db_width;
+ enum qed_db_rec_space db_space;
+ u8 hwfn_idx;
+};
+
+/* Display a single doorbell recovery entry */
+static void qed_db_recovery_dp_entry(struct qed_hwfn *p_hwfn,
+ struct qed_db_recovery_entry *db_entry,
+ char *action)
+{
+ DP_VERBOSE(p_hwfn,
+ QED_MSG_SPQ,
+ "(%s: db_entry %p, addr %p, data %p, width %s, %s space, hwfn %d)\n",
+ action,
+ db_entry,
+ db_entry->db_addr,
+ db_entry->db_data,
+ db_entry->db_width == DB_REC_WIDTH_32B ? "32b" : "64b",
+ db_entry->db_space == DB_REC_USER ? "user" : "kernel",
+ db_entry->hwfn_idx);
+}
+
+/* Doorbell address sanity (address within doorbell bar range) */
+static bool qed_db_rec_sanity(struct qed_dev *cdev,
+ void __iomem *db_addr, void *db_data)
+{
+ /* Make sure doorbell address is within the doorbell bar */
+ if (db_addr < cdev->doorbells ||
+ (u8 __iomem *)db_addr >
+ (u8 __iomem *)cdev->doorbells + cdev->db_size) {
+ WARN(true,
+ "Illegal doorbell address: %p. Legal range for doorbell addresses is [%p..%p]\n",
+ db_addr,
+ cdev->doorbells,
+ (u8 __iomem *)cdev->doorbells + cdev->db_size);
+ return false;
+ }
+
+ /* ake sure doorbell data pointer is not null */
+ if (!db_data) {
+ WARN(true, "Illegal doorbell data pointer: %p", db_data);
+ return false;
+ }
+
+ return true;
+}
+
+/* Find hwfn according to the doorbell address */
+static struct qed_hwfn *qed_db_rec_find_hwfn(struct qed_dev *cdev,
+ void __iomem *db_addr)
+{
+ struct qed_hwfn *p_hwfn;
+
+ /* In CMT doorbell bar is split down the middle between engine 0 and enigne 1 */
+ if (cdev->num_hwfns > 1)
+ p_hwfn = db_addr < cdev->hwfns[1].doorbells ?
+ &cdev->hwfns[0] : &cdev->hwfns[1];
+ else
+ p_hwfn = QED_LEADING_HWFN(cdev);
+
+ return p_hwfn;
+}
+
+/* Add a new entry to the doorbell recovery mechanism */
+int qed_db_recovery_add(struct qed_dev *cdev,
+ void __iomem *db_addr,
+ void *db_data,
+ enum qed_db_rec_width db_width,
+ enum qed_db_rec_space db_space)
+{
+ struct qed_db_recovery_entry *db_entry;
+ struct qed_hwfn *p_hwfn;
+
+ /* Shortcircuit VFs, for now */
+ if (IS_VF(cdev)) {
+ DP_VERBOSE(cdev,
+ QED_MSG_IOV, "db recovery - skipping VF doorbell\n");
+ return 0;
+ }
+
+ /* Sanitize doorbell address */
+ if (!qed_db_rec_sanity(cdev, db_addr, db_data))
+ return -EINVAL;
+
+ /* Obtain hwfn from doorbell address */
+ p_hwfn = qed_db_rec_find_hwfn(cdev, db_addr);
+
+ /* Create entry */
+ db_entry = kzalloc(sizeof(*db_entry), GFP_KERNEL);
+ if (!db_entry) {
+ DP_NOTICE(cdev, "Failed to allocate a db recovery entry\n");
+ return -ENOMEM;
+ }
+
+ /* Populate entry */
+ db_entry->db_addr = db_addr;
+ db_entry->db_data = db_data;
+ db_entry->db_width = db_width;
+ db_entry->db_space = db_space;
+ db_entry->hwfn_idx = p_hwfn->my_id;
+
+ /* Display */
+ qed_db_recovery_dp_entry(p_hwfn, db_entry, "Adding");
+
+ /* Protect the list */
+ spin_lock_bh(&p_hwfn->db_recovery_info.lock);
+ list_add_tail(&db_entry->list_entry, &p_hwfn->db_recovery_info.list);
+ spin_unlock_bh(&p_hwfn->db_recovery_info.lock);
+
+ return 0;
+}
+
+/* Remove an entry from the doorbell recovery mechanism */
+int qed_db_recovery_del(struct qed_dev *cdev,
+ void __iomem *db_addr, void *db_data)
+{
+ struct qed_db_recovery_entry *db_entry = NULL;
+ struct qed_hwfn *p_hwfn;
+ int rc = -EINVAL;
+
+ /* Shortcircuit VFs, for now */
+ if (IS_VF(cdev)) {
+ DP_VERBOSE(cdev,
+ QED_MSG_IOV, "db recovery - skipping VF doorbell\n");
+ return 0;
+ }
+
+ /* Sanitize doorbell address */
+ if (!qed_db_rec_sanity(cdev, db_addr, db_data))
+ return -EINVAL;
+
+ /* Obtain hwfn from doorbell address */
+ p_hwfn = qed_db_rec_find_hwfn(cdev, db_addr);
+
+ /* Protect the list */
+ spin_lock_bh(&p_hwfn->db_recovery_info.lock);
+ list_for_each_entry(db_entry,
+ &p_hwfn->db_recovery_info.list, list_entry) {
+ /* search according to db_data addr since db_addr is not unique (roce) */
+ if (db_entry->db_data == db_data) {
+ qed_db_recovery_dp_entry(p_hwfn, db_entry, "Deleting");
+ list_del(&db_entry->list_entry);
+ rc = 0;
+ break;
+ }
+ }
+
+ spin_unlock_bh(&p_hwfn->db_recovery_info.lock);
+
+ if (rc == -EINVAL)
+
+ DP_NOTICE(p_hwfn,
+ "Failed to find element in list. Key (db_data addr) was %p. db_addr was %p\n",
+ db_data, db_addr);
+ else
+ kfree(db_entry);
+
+ return rc;
+}
+
+/* Initialize the doorbell recovery mechanism */
+static int qed_db_recovery_setup(struct qed_hwfn *p_hwfn)
+{
+ DP_VERBOSE(p_hwfn, QED_MSG_SPQ, "Setting up db recovery\n");
+
+ /* Make sure db_size was set in cdev */
+ if (!p_hwfn->cdev->db_size) {
+ DP_ERR(p_hwfn->cdev, "db_size not set\n");
+ return -EINVAL;
+ }
+
+ INIT_LIST_HEAD(&p_hwfn->db_recovery_info.list);
+ spin_lock_init(&p_hwfn->db_recovery_info.lock);
+ p_hwfn->db_recovery_info.db_recovery_counter = 0;
+
+ return 0;
+}
+
+/* Destroy the doorbell recovery mechanism */
+static void qed_db_recovery_teardown(struct qed_hwfn *p_hwfn)
+{
+ struct qed_db_recovery_entry *db_entry = NULL;
+
+ DP_VERBOSE(p_hwfn, QED_MSG_SPQ, "Tearing down db recovery\n");
+ if (!list_empty(&p_hwfn->db_recovery_info.list)) {
+ DP_VERBOSE(p_hwfn,
+ QED_MSG_SPQ,
+ "Doorbell Recovery teardown found the doorbell recovery list was not empty (Expected in disorderly driver unload (e.g. recovery) otherwise this probably means some flow forgot to db_recovery_del). Prepare to purge doorbell recovery list...\n");
+ while (!list_empty(&p_hwfn->db_recovery_info.list)) {
+ db_entry =
+ list_first_entry(&p_hwfn->db_recovery_info.list,
+ struct qed_db_recovery_entry,
+ list_entry);
+ qed_db_recovery_dp_entry(p_hwfn, db_entry, "Purging");
+ list_del(&db_entry->list_entry);
+ kfree(db_entry);
+ }
+ }
+ p_hwfn->db_recovery_info.db_recovery_counter = 0;
+}
+
+/* Print the content of the doorbell recovery mechanism */
+void qed_db_recovery_dp(struct qed_hwfn *p_hwfn)
+{
+ struct qed_db_recovery_entry *db_entry = NULL;
+
+ DP_NOTICE(p_hwfn,
+ "Dispalying doorbell recovery database. Counter was %d\n",
+ p_hwfn->db_recovery_info.db_recovery_counter);
+
+ /* Protect the list */
+ spin_lock_bh(&p_hwfn->db_recovery_info.lock);
+ list_for_each_entry(db_entry,
+ &p_hwfn->db_recovery_info.list, list_entry) {
+ qed_db_recovery_dp_entry(p_hwfn, db_entry, "Printing");
+ }
+
+ spin_unlock_bh(&p_hwfn->db_recovery_info.lock);
+}
+
+/* Ring the doorbell of a single doorbell recovery entry */
+static void qed_db_recovery_ring(struct qed_hwfn *p_hwfn,
+ struct qed_db_recovery_entry *db_entry,
+ enum qed_db_rec_exec db_exec)
+{
+ if (db_exec != DB_REC_ONCE) {
+ /* Print according to width */
+ if (db_entry->db_width == DB_REC_WIDTH_32B) {
+ DP_VERBOSE(p_hwfn, QED_MSG_SPQ,
+ "%s doorbell address %p data %x\n",
+ db_exec == DB_REC_DRY_RUN ?
+ "would have rung" : "ringing",
+ db_entry->db_addr,
+ *(u32 *)db_entry->db_data);
+ } else {
+ DP_VERBOSE(p_hwfn, QED_MSG_SPQ,
+ "%s doorbell address %p data %llx\n",
+ db_exec == DB_REC_DRY_RUN ?
+ "would have rung" : "ringing",
+ db_entry->db_addr,
+ *(u64 *)(db_entry->db_data));
+ }
+ }
+
+ /* Sanity */
+ if (!qed_db_rec_sanity(p_hwfn->cdev, db_entry->db_addr,
+ db_entry->db_data))
+ return;
+
+ /* Flush the write combined buffer. Since there are multiple doorbelling
+ * entities using the same address, if we don't flush, a transaction
+ * could be lost.
+ */
+ wmb();
+
+ /* Ring the doorbell */
+ if (db_exec == DB_REC_REAL_DEAL || db_exec == DB_REC_ONCE) {
+ if (db_entry->db_width == DB_REC_WIDTH_32B)
+ DIRECT_REG_WR(db_entry->db_addr,
+ *(u32 *)(db_entry->db_data));
+ else
+ DIRECT_REG_WR64(db_entry->db_addr,
+ *(u64 *)(db_entry->db_data));
+ }
+
+ /* Flush the write combined buffer. Next doorbell may come from a
+ * different entity to the same address...
+ */
+ wmb();
+}
+
+/* Traverse the doorbell recovery entry list and ring all the doorbells */
+void qed_db_recovery_execute(struct qed_hwfn *p_hwfn,
+ enum qed_db_rec_exec db_exec)
+{
+ struct qed_db_recovery_entry *db_entry = NULL;
+
+ if (db_exec != DB_REC_ONCE) {
+ DP_NOTICE(p_hwfn,
+ "Executing doorbell recovery. Counter was %d\n",
+ p_hwfn->db_recovery_info.db_recovery_counter);
+
+ /* Track amount of times recovery was executed */
+ p_hwfn->db_recovery_info.db_recovery_counter++;
+ }
+
+ /* Protect the list */
+ spin_lock_bh(&p_hwfn->db_recovery_info.lock);
+ list_for_each_entry(db_entry,
+ &p_hwfn->db_recovery_info.list, list_entry) {
+ qed_db_recovery_ring(p_hwfn, db_entry, db_exec);
+ if (db_exec == DB_REC_ONCE)
+ break;
+ }
+
+ spin_unlock_bh(&p_hwfn->db_recovery_info.lock);
+}
+
+/******************** Doorbell Recovery end ****************/
+
#define QED_MIN_DPIS (4)
#define QED_MIN_PWM_REGION (QED_WID_SIZE * QED_MIN_DPIS)
@@ -190,6 +502,9 @@ void qed_resc_free(struct qed_dev *cdev)
qed_dmae_info_free(p_hwfn);
qed_dcbx_info_free(p_hwfn);
qed_dbg_user_data_free(p_hwfn);
+
+ /* Destroy doorbell recovery mechanism */
+ qed_db_recovery_teardown(p_hwfn);
}
}
@@ -946,6 +1261,11 @@ int qed_resc_alloc(struct qed_dev *cdev)
struct qed_hwfn *p_hwfn = &cdev->hwfns[i];
u32 n_eqes, num_cons;
+ /* Initialize the doorbell recovery mechanism */
+ rc = qed_db_recovery_setup(p_hwfn);
+ if (rc)
+ goto alloc_err;
+
/* First allocate the context manager structure */
rc = qed_cxt_mngr_alloc(p_hwfn);
if (rc)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev_api.h b/drivers/net/ethernet/qlogic/qed/qed_dev_api.h
index defdda1..acccd85 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_dev_api.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_dev_api.h
@@ -472,6 +472,34 @@ int qed_final_cleanup(struct qed_hwfn *p_hwfn,
int
qed_set_queue_coalesce(u16 rx_coal, u16 tx_coal, void *p_handle);
+/**
+ * @brief db_recovery_add - add doorbell information to the doorbell
+ * recovery mechanism.
+ *
+ * @param cdev
+ * @param db_addr - doorbell address
+ * @param db_data - address of where db_data is stored
+ * @param db_width - doorbell is 32b pr 64b
+ * @param db_space - doorbell recovery addresses are user or kernel space
+ */
+int qed_db_recovery_add(struct qed_dev *cdev,
+ void __iomem *db_addr,
+ void *db_data,
+ enum qed_db_rec_width db_width,
+ enum qed_db_rec_space db_space);
+
+/**
+ * @brief db_recovery_del - remove doorbell information from the doorbell
+ * recovery mechanism. db_data serves as key (db_addr is not unique).
+ *
+ * @param cdev
+ * @param db_addr - doorbell address
+ * @param db_data - address where db_data is stored. Serves as key for the
+ * entry to delete.
+ */
+int qed_db_recovery_del(struct qed_dev *cdev,
+ void __iomem *db_addr, void *db_data);
+
const char *qed_hw_get_resc_name(enum qed_resources res_id);
#endif
diff --git a/include/linux/qed/qed_if.h b/include/linux/qed/qed_if.h
index dee3c9c..c3f9844 100644
--- a/include/linux/qed/qed_if.h
+++ b/include/linux/qed/qed_if.h
@@ -448,11 +448,26 @@ struct qed_mfw_tlv_iscsi {
bool tx_bytes_set;
};
+enum qed_db_rec_width {
+ DB_REC_WIDTH_32B,
+ DB_REC_WIDTH_64B,
+};
+
+enum qed_db_rec_space {
+ DB_REC_KERNEL,
+ DB_REC_USER,
+};
+
#define DIRECT_REG_WR(reg_addr, val) writel((u32)val, \
(void __iomem *)(reg_addr))
#define DIRECT_REG_RD(reg_addr) readl((void __iomem *)(reg_addr))
+#define DIRECT_REG_WR64(reg_addr, val) writeq((u32)val, \
+ (void __iomem *)(reg_addr))
+
+#define DIRECT_REG_RD64(reg_addr) readq((void __iomem *)(reg_addr))
+
#define QED_COALESCE_MAX 0x1FF
#define QED_DEFAULT_RX_USECS 12
#define QED_DEFAULT_TX_USECS 48
--
1.8.3.1
^ permalink raw reply related
* [PATCH 20/20] zd1201: mark expected switch fall-through
From: Gustavo A. R. Silva @ 2018-10-22 20:48 UTC (permalink / raw)
To: Kalle Valo
Cc: Kalle Valo, linux-wireless, David S. Miller, netdev, linux-kernel,
Gustavo A. R. Silva
In-Reply-To: <cover.1540239684.git.gustavo@embeddedor.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
---
drivers/net/wireless/zydas/zd1201.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/zydas/zd1201.c b/drivers/net/wireless/zydas/zd1201.c
index 2534038..22c70f1 100644
--- a/drivers/net/wireless/zydas/zd1201.c
+++ b/drivers/net/wireless/zydas/zd1201.c
@@ -969,6 +969,7 @@ static int zd1201_set_mode(struct net_device *dev,
*/
zd1201_join(zd, "\0-*#\0", 5);
/* Put port in pIBSS */
+ /* Fall through */
case 8: /* No pseudo-IBSS in wireless extensions (yet) */
porttype = ZD1201_PORTTYPE_PSEUDOIBSS;
break;
--
2.7.4
^ permalink raw reply related
* [PATCH 19/20] rtlwifi: rtl8821ae: phy: Mark expected switch fall-through
From: Gustavo A. R. Silva @ 2018-10-22 20:47 UTC (permalink / raw)
To: Ping-Ke Shih
Cc: Kalle Valo, linux-wireless, David S. Miller, netdev, linux-kernel,
Gustavo A. R. Silva
In-Reply-To: <cover.1540239684.git.gustavo@embeddedor.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
---
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c
index 176deb2..a75451c 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c
@@ -394,6 +394,7 @@ static void _rtl8812ae_phy_set_rfe_reg_24g(struct ieee80211_hw *hw)
rtl_set_bbreg(hw, RB_RFE_INV, BMASKRFEINV, 0x000);
break;
}
+ /* fall through */
case 0:
case 2:
default:
--
2.7.4
^ permalink raw reply related
* [PATCH 18/20] ray_cs: mark expected switch fall-throughs
From: Gustavo A. R. Silva @ 2018-10-22 20:47 UTC (permalink / raw)
To: Kalle Valo
Cc: linux-wireless, David S. Miller, netdev, linux-kernel,
Gustavo A. R. Silva
In-Reply-To: <cover.1540239684.git.gustavo@embeddedor.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 114948 ("Missing break in switch")
Addresses-Coverity-ID: 114949 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
---
drivers/net/wireless/ray_cs.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 08c607c..33ad875 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -889,8 +889,10 @@ static int ray_hw_xmit(unsigned char *data, int len, struct net_device *dev,
switch (ccsindex = get_free_tx_ccs(local)) {
case ECCSBUSY:
pr_debug("ray_hw_xmit tx_ccs table busy\n");
+ /* fall through */
case ECCSFULL:
pr_debug("ray_hw_xmit No free tx ccs\n");
+ /* fall through */
case ECARDGONE:
netif_stop_queue(dev);
return XMIT_NO_CCS;
--
2.7.4
^ permalink raw reply related
* Re: [PATCH net-next 3/4] net: phy-c45: Implement reset/suspend/resume callbacks
From: Andrew Lunn @ 2018-10-22 12:28 UTC (permalink / raw)
To: Jose Abreu; +Cc: netdev, Florian Fainelli, David S. Miller, Joao Pinto
In-Reply-To: <b65cd0978587224eb1496ad60d224394525b8ba6.1540204183.git.joabreu@synopsys.com>
> EXPORT_SYMBOL_GPL(gen10g_resume);
> @@ -327,7 +381,7 @@ struct phy_driver genphy_10g_driver = {
> .phy_id = 0xffffffff,
> .phy_id_mask = 0xffffffff,
> .name = "Generic 10G PHY",
> - .soft_reset = gen10g_no_soft_reset,
> + .soft_reset = gen10g_soft_reset,
> .config_init = gen10g_config_init,
> .features = 0,
> .aneg_done = genphy_c45_aneg_done,
Hi Jose
You need to be careful here. There is a reason this is called
gen10g_no_soft_reset, rather than having an empty
gen10g_soft_reset. Some PHYs break when you do a reset. So adding a
gen10g_soft_reset is fine, but don't change this here, without first
understanding the history, and talking to Russell King.
Andrew
^ permalink raw reply
* [PATCH 16/20] rt2x00: rt2800lib: mark expected switch fall-throughs
From: Gustavo A. R. Silva @ 2018-10-22 20:46 UTC (permalink / raw)
To: Stanislaw Gruszka, Helmut Schaa
Cc: Kalle Valo, linux-wireless, David S. Miller, netdev, linux-kernel,
Gustavo A. R. Silva
In-Reply-To: <cover.1540239684.git.gustavo@embeddedor.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 145198 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
---
drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
index 9e7b893..0e95555 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -2482,6 +2482,7 @@ static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev,
switch (rt2x00dev->default_ant.tx_chain_num) {
case 1:
rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
+ /* fall through */
case 2:
rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1);
break;
@@ -2490,6 +2491,7 @@ static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev,
switch (rt2x00dev->default_ant.rx_chain_num) {
case 1:
rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
+ /* fall through */
case 2:
rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1);
break;
@@ -9457,8 +9459,10 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
switch (rx_chains) {
case 3:
spec->ht.mcs.rx_mask[2] = 0xff;
+ /* fall through */
case 2:
spec->ht.mcs.rx_mask[1] = 0xff;
+ /* fall through */
case 1:
spec->ht.mcs.rx_mask[0] = 0xff;
spec->ht.mcs.rx_mask[4] = 0x1; /* MCS32 */
--
2.7.4
^ permalink raw reply related
* [PATCH 15/20] rt2x00: rt2500pci: mark expected switch fall-through
From: Gustavo A. R. Silva @ 2018-10-22 20:45 UTC (permalink / raw)
To: Stanislaw Gruszka, Helmut Schaa
Cc: Kalle Valo, linux-wireless-u79uwXL29TY76Z2rM5mHXA,
David S. Miller, netdev-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Gustavo A. R. Silva
In-Reply-To: <cover.1540239684.git.gustavo-L1vi/lXTdts+Va1GwOuvDg@public.gmane.org>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <gustavo-L1vi/lXTdts+Va1GwOuvDg@public.gmane.org>
---
drivers/net/wireless/ralink/rt2x00/rt2500pci.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2500pci.c b/drivers/net/wireless/ralink/rt2x00/rt2500pci.c
index 1ff5434..e8e7bfe 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2500pci.c
@@ -1430,7 +1430,7 @@ static void rt2500pci_txdone(struct rt2x00_dev *rt2x00dev,
break;
case 2: /* Failure, excessive retries */
__set_bit(TXDONE_EXCESSIVE_RETRY, &txdesc.flags);
- /* Don't break, this is a failed frame! */
+ /* Fall through - this is a failed frame! */
default: /* Failure */
__set_bit(TXDONE_FAILURE, &txdesc.flags);
}
--
2.7.4
^ permalink raw reply related
* [PATCH 14/20] rt2x00: rt2400pci: mark expected switch fall-through
From: Gustavo A. R. Silva @ 2018-10-22 20:44 UTC (permalink / raw)
To: Stanislaw Gruszka, Helmut Schaa
Cc: Kalle Valo, linux-wireless, David S. Miller, netdev, linux-kernel,
Gustavo A. R. Silva
In-Reply-To: <cover.1540239684.git.gustavo@embeddedor.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
---
drivers/net/wireless/ralink/rt2x00/rt2400pci.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2400pci.c b/drivers/net/wireless/ralink/rt2x00/rt2400pci.c
index 0bc8b02..49a7327 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2400pci.c
@@ -1302,7 +1302,7 @@ static void rt2400pci_txdone(struct rt2x00_dev *rt2x00dev,
break;
case 2: /* Failure, excessive retries */
__set_bit(TXDONE_EXCESSIVE_RETRY, &txdesc.flags);
- /* Don't break, this is a failed frame! */
+ /* Fall through - this is a failed frame! */
default: /* Failure */
__set_bit(TXDONE_FAILURE, &txdesc.flags);
}
--
2.7.4
^ permalink raw reply related
* [PATCH 13/20] mwifiex: Mark expected switch fall-through
From: Gustavo A. R. Silva @ 2018-10-22 20:43 UTC (permalink / raw)
To: Amitkumar Karwar, Nishant Sarmukadam, Ganapathi Bhat, Xinming Hu
Cc: Kalle Valo, linux-wireless-u79uwXL29TY76Z2rM5mHXA,
David S. Miller, netdev-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Gustavo A. R. Silva
In-Reply-To: <cover.1540239684.git.gustavo-L1vi/lXTdts+Va1GwOuvDg@public.gmane.org>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <gustavo-L1vi/lXTdts+Va1GwOuvDg@public.gmane.org>
---
drivers/net/wireless/marvell/mwifiex/ie.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/marvell/mwifiex/ie.c b/drivers/net/wireless/marvell/mwifiex/ie.c
index 75cbd60..6845eb5 100644
--- a/drivers/net/wireless/marvell/mwifiex/ie.c
+++ b/drivers/net/wireless/marvell/mwifiex/ie.c
@@ -363,6 +363,7 @@ static int mwifiex_uap_parse_tail_ies(struct mwifiex_private *priv,
(const u8 *)hdr,
hdr->len + sizeof(struct ieee_types_header)))
break;
+ /* fall through */
default:
memcpy(gen_ie->ie_buffer + ie_len, hdr,
hdr->len + sizeof(struct ieee_types_header));
--
2.7.4
^ permalink raw reply related
* [PATCH 11/20] prism54: isl_ioctl: mark expected switch fall-through
From: Gustavo A. R. Silva @ 2018-10-22 20:42 UTC (permalink / raw)
To: Luis R. Rodriguez
Cc: Kalle Valo, linux-wireless, David S. Miller, netdev, linux-kernel,
Gustavo A. R. Silva
In-Reply-To: <cover.1540239684.git.gustavo@embeddedor.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
---
drivers/net/wireless/intersil/prism54/isl_ioctl.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/intersil/prism54/isl_ioctl.c b/drivers/net/wireless/intersil/prism54/isl_ioctl.c
index 334717b0..3ccf2a4 100644
--- a/drivers/net/wireless/intersil/prism54/isl_ioctl.c
+++ b/drivers/net/wireless/intersil/prism54/isl_ioctl.c
@@ -1691,6 +1691,7 @@ static int prism54_get_encodeext(struct net_device *ndev,
case DOT11_AUTH_BOTH:
case DOT11_AUTH_SK:
wrqu->encoding.flags |= IW_ENCODE_RESTRICTED;
+ /* fall through */
case DOT11_AUTH_OS:
default:
wrqu->encoding.flags |= IW_ENCODE_OPEN;
--
2.7.4
^ permalink raw reply related
* [PATCH 10/20] prism54: isl_38xx: Mark expected switch fall-through
From: Gustavo A. R. Silva @ 2018-10-22 20:42 UTC (permalink / raw)
To: Luis R. Rodriguez
Cc: Kalle Valo, linux-wireless, David S. Miller, netdev, linux-kernel,
Gustavo A. R. Silva
In-Reply-To: <cover.1540239684.git.gustavo@embeddedor.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 114944 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
---
drivers/net/wireless/intersil/prism54/isl_38xx.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/intersil/prism54/isl_38xx.c b/drivers/net/wireless/intersil/prism54/isl_38xx.c
index ce9d4db..b0eb58a 100644
--- a/drivers/net/wireless/intersil/prism54/isl_38xx.c
+++ b/drivers/net/wireless/intersil/prism54/isl_38xx.c
@@ -235,6 +235,7 @@ isl38xx_in_queue(isl38xx_control_block *cb, int queue)
/* send queues */
case ISL38XX_CB_TX_MGMTQ:
BUG_ON(delta > ISL38XX_CB_MGMT_QSIZE);
+ /* fall through */
case ISL38XX_CB_TX_DATA_LQ:
case ISL38XX_CB_TX_DATA_HQ:
--
2.7.4
^ permalink raw reply related
* [PATCH 09/20] orinoco_usb: mark expected switch fall-through
From: Gustavo A. R. Silva @ 2018-10-22 20:42 UTC (permalink / raw)
To: Kalle Valo
Cc: linux-wireless, David S. Miller, netdev, linux-kernel,
Gustavo A. R. Silva
In-Reply-To: <cover.1540239684.git.gustavo@embeddedor.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
---
drivers/net/wireless/intersil/orinoco/orinoco_usb.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/intersil/orinoco/orinoco_usb.c b/drivers/net/wireless/intersil/orinoco/orinoco_usb.c
index 21bb684..40a8b941 100644
--- a/drivers/net/wireless/intersil/orinoco/orinoco_usb.c
+++ b/drivers/net/wireless/intersil/orinoco/orinoco_usb.c
@@ -908,6 +908,7 @@ static int ezusb_access_ltv(struct ezusb_priv *upriv,
case EZUSB_CTX_REQ_SUBMITTED:
if (!ctx->in_rid)
break;
+ /* fall through */
default:
err("%s: Unexpected context state %d", __func__,
state);
--
2.7.4
^ permalink raw reply related
* [PATCH 08/20] iwlegacy: common: mark expected switch fall-throughs
From: Gustavo A. R. Silva @ 2018-10-22 20:41 UTC (permalink / raw)
To: Stanislaw Gruszka
Cc: Kalle Valo, linux-wireless, David S. Miller, netdev, linux-kernel,
Gustavo A. R. Silva
In-Reply-To: <cover.1540239684.git.gustavo@embeddedor.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 201384 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
---
drivers/net/wireless/intel/iwlegacy/common.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/wireless/intel/iwlegacy/common.c b/drivers/net/wireless/intel/iwlegacy/common.c
index 6514baf..a2f86cb 100644
--- a/drivers/net/wireless/intel/iwlegacy/common.c
+++ b/drivers/net/wireless/intel/iwlegacy/common.c
@@ -2695,6 +2695,7 @@ il_set_decrypted_flag(struct il_priv *il, struct ieee80211_hdr *hdr,
if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) ==
RX_RES_STATUS_BAD_KEY_TTAK)
break;
+ /* fall through */
case RX_RES_STATUS_SEC_TYPE_WEP:
if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) ==
@@ -2704,6 +2705,7 @@ il_set_decrypted_flag(struct il_priv *il, struct ieee80211_hdr *hdr,
D_RX("Packet destroyed\n");
return -1;
}
+ /* fall through */
case RX_RES_STATUS_SEC_TYPE_CCMP:
if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) ==
RX_RES_STATUS_DECRYPT_OK) {
--
2.7.4
^ permalink raw reply related
* [PATCH 07/20] iwlegacy: 4965-mac: mark expected switch fall-through
From: Gustavo A. R. Silva @ 2018-10-22 20:40 UTC (permalink / raw)
To: Stanislaw Gruszka
Cc: Kalle Valo, linux-wireless, David S. Miller, netdev, linux-kernel,
Gustavo A. R. Silva
In-Reply-To: <cover.1540239684.git.gustavo@embeddedor.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
---
drivers/net/wireless/intel/iwlegacy/4965-mac.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/intel/iwlegacy/4965-mac.c b/drivers/net/wireless/intel/iwlegacy/4965-mac.c
index 280cd8a..6b4488a 100644
--- a/drivers/net/wireless/intel/iwlegacy/4965-mac.c
+++ b/drivers/net/wireless/intel/iwlegacy/4965-mac.c
@@ -559,7 +559,7 @@ il4965_translate_rx_status(struct il_priv *il, u32 decrypt_in)
decrypt_out |= RX_RES_STATUS_BAD_KEY_TTAK;
break;
}
- /* fall through if TTAK OK */
+ /* fall through - if TTAK OK */
default:
if (!(decrypt_in & RX_MPDU_RES_STATUS_ICV_OK))
decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC;
--
2.7.4
^ permalink raw reply related
* [PATCH 06/20] carl9170: tx: mark expected switch fall-throughs
From: Gustavo A. R. Silva @ 2018-10-22 20:40 UTC (permalink / raw)
To: Christian Lamparter
Cc: Kalle Valo, linux-wireless, David S. Miller, netdev, linux-kernel,
Gustavo A. R. Silva
In-Reply-To: <cover.1540239684.git.gustavo@embeddedor.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
---
drivers/net/wireless/ath/carl9170/tx.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/wireless/ath/carl9170/tx.c b/drivers/net/wireless/ath/carl9170/tx.c
index 8c75651..2407931 100644
--- a/drivers/net/wireless/ath/carl9170/tx.c
+++ b/drivers/net/wireless/ath/carl9170/tx.c
@@ -830,10 +830,12 @@ static bool carl9170_tx_rts_check(struct ar9170 *ar,
case CARL9170_ERP_AUTO:
if (ampdu)
break;
+ /* fall through */
case CARL9170_ERP_MAC80211:
if (!(rate->flags & IEEE80211_TX_RC_USE_RTS_CTS))
break;
+ /* fall through */
case CARL9170_ERP_RTS:
if (likely(!multi))
@@ -854,6 +856,7 @@ static bool carl9170_tx_cts_check(struct ar9170 *ar,
case CARL9170_ERP_MAC80211:
if (!(rate->flags & IEEE80211_TX_RC_USE_CTS_PROTECT))
break;
+ /* fall through */
case CARL9170_ERP_CTS:
return true;
--
2.7.4
^ permalink raw reply related
* Re: [PATCH net-next 2/4] net: phy-c45: Populate autoneg_done callback
From: Andrew Lunn @ 2018-10-22 12:21 UTC (permalink / raw)
To: Jose Abreu; +Cc: netdev, Florian Fainelli, David S. Miller, Joao Pinto
In-Reply-To: <65a0791a760dc488f62445343e041baf4a2db17e.1540204183.git.joabreu@synopsys.com>
On Mon, Oct 22, 2018 at 11:32:47AM +0100, Jose Abreu wrote:
> We already have this callback implemented. Use it in driver structure.
>
> Signed-off-by: Jose Abreu <joabreu@synopsys.com>
> Cc: Andrew Lunn <andrew@lunn.ch>
> Cc: Florian Fainelli <f.fainelli@gmail.com>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Joao Pinto <joao.pinto@synopsys.com>
> ---
> drivers/net/phy/phy-c45.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
> index e1225545362d..c0135217b81f 100644
> --- a/drivers/net/phy/phy-c45.c
> +++ b/drivers/net/phy/phy-c45.c
> @@ -330,6 +330,7 @@ struct phy_driver genphy_10g_driver = {
> .soft_reset = gen10g_no_soft_reset,
> .config_init = gen10g_config_init,
> .features = 0,
> + .aneg_done = genphy_c45_aneg_done,
> .config_aneg = gen10g_config_aneg,
> .read_status = gen10g_read_status,
> .suspend = gen10g_suspend,
We should probably do something about the naming. I need to look at
the history to understand why we have gen10g_ and genphy_c45_.
Andrew
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox