* Re: [patch net-next 3/3] netdevsim: create devlink and netdev instances in namespace
From: Jakub Kicinski @ 2019-07-29 18:59 UTC (permalink / raw)
To: Jiri Pirko; +Cc: netdev, davem, sthemmin, dsahern, mlxsw
In-Reply-To: <20190727094459.26345-4-jiri@resnulli.us>
On Sat, 27 Jul 2019 11:44:59 +0200, Jiri Pirko wrote:
> From: Jiri Pirko <jiri@mellanox.com>
>
> When user does create new netdevsim instance using sysfs bus file,
> create the devlink instance and related netdev instance in the namespace
> of the caller.
>
> Signed-off-by: Jiri Pirko <jiri@mellanox.com>
> diff --git a/drivers/net/netdevsim/bus.c b/drivers/net/netdevsim/bus.c
> index 1a0ff3d7747b..6aeed0c600f8 100644
> --- a/drivers/net/netdevsim/bus.c
> +++ b/drivers/net/netdevsim/bus.c
> @@ -283,6 +283,7 @@ nsim_bus_dev_new(unsigned int id, unsigned int port_count)
> nsim_bus_dev->dev.bus = &nsim_bus;
> nsim_bus_dev->dev.type = &nsim_bus_dev_type;
> nsim_bus_dev->port_count = port_count;
> + nsim_bus_dev->initial_net = current->nsproxy->net_ns;
>
> err = device_register(&nsim_bus_dev->dev);
> if (err)
The saved initial_net is only to carry the net info from the adding
process to the probe callback, because probe can be asynchronous?
I'm not entirely sure netdevsim can probe asynchronously in practice
given we never return EPROBE_DEFER, but would you mind at least adding
a comment stating that next to the definition of the field, otherwise
I worry someone may mistakenly use this field instead of the up-to-date
devlink's netns.
> diff --git a/drivers/net/netdevsim/netdevsim.h b/drivers/net/netdevsim/netdevsim.h
> index 79c05af2a7c0..cdf53d0e0c49 100644
> --- a/drivers/net/netdevsim/netdevsim.h
> +++ b/drivers/net/netdevsim/netdevsim.h
> @@ -19,6 +19,7 @@
> #include <linux/netdevice.h>
> #include <linux/u64_stats_sync.h>
> #include <net/devlink.h>
> +#include <net/net_namespace.h>
You can just do a forward declaration, no need to pull in the header.
> #include <net/xdp.h>
>
> #define DRV_NAME "netdevsim"
> @@ -213,6 +215,7 @@ struct nsim_bus_dev {
> struct device dev;
> struct list_head list;
> unsigned int port_count;
> + struct net *initial_net;
> unsigned int num_vfs;
> struct nsim_vf_config *vfconfigs;
> };
Otherwise makes perfect sense, with the above nits addressed feel free
to add:
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
^ permalink raw reply
* [PATCH] net: sctp: drop unneeded likely() call around IS_ERR()
From: Enrico Weigelt, metux IT consult @ 2019-07-29 18:55 UTC (permalink / raw)
To: linux-kernel
Cc: vyasevich, nhorman, marcelo.leitner, davem, linux-sctp, netdev
From: Enrico Weigelt <info@metux.net>
IS_ERR() already calls unlikely(), so this extra unlikely() call
around IS_ERR() is not needed.
Signed-off-by: Enrico Weigelt <info@metux.net>
---
net/sctp/socket.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index aa80cda..9d1f83b 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -985,7 +985,7 @@ static int sctp_setsockopt_bindx(struct sock *sk,
return -EINVAL;
kaddrs = memdup_user(addrs, addrs_size);
- if (unlikely(IS_ERR(kaddrs)))
+ if (IS_ERR(kaddrs))
return PTR_ERR(kaddrs);
/* Walk through the addrs buffer and count the number of addresses. */
@@ -1315,7 +1315,7 @@ static int __sctp_setsockopt_connectx(struct sock *sk,
return -EINVAL;
kaddrs = memdup_user(addrs, addrs_size);
- if (unlikely(IS_ERR(kaddrs)))
+ if (IS_ERR(kaddrs))
return PTR_ERR(kaddrs);
/* Allow security module to validate connectx addresses. */
--
1.9.1
^ permalink raw reply related
* Re: [PATCH] net/mlx5: fix -Wtype-limits compilation warnings
From: Saeed Mahameed @ 2019-07-29 18:51 UTC (permalink / raw)
To: cai@lca.pw, Leon Romanovsky
Cc: Yishai Hadas, davem@davemloft.net, netdev@vger.kernel.org,
linux-rdma@vger.kernel.org, linux-kernel@vger.kernel.org
In-Reply-To: <1563820482-10302-1-git-send-email-cai@lca.pw>
On Mon, 2019-07-22 at 14:34 -0400, Qian Cai wrote:
> The commit b9a7ba556207 ("net/mlx5: Use event mask based on device
> capabilities") introduced a few compilation warnings due to it bumps
> MLX5_EVENT_TYPE_MAX from 0x27 to 0x100 which is always greater than
> an "struct {mlx5_eqe|mlx5_nb}.type" that is an "u8".
>
> drivers/net/ethernet/mellanox/mlx5/core/eq.c: In function
> 'mlx5_eq_notifier_register':
> drivers/net/ethernet/mellanox/mlx5/core/eq.c:948:21: warning:
> comparison
> is always false due to limited range of data type [-Wtype-limits]
> if (nb->event_type >= MLX5_EVENT_TYPE_MAX)
> ^~
> drivers/net/ethernet/mellanox/mlx5/core/eq.c: In function
> 'mlx5_eq_notifier_unregister':
> drivers/net/ethernet/mellanox/mlx5/core/eq.c:959:21: warning:
> comparison
> is always false due to limited range of data type [-Wtype-limits]
> if (nb->event_type >= MLX5_EVENT_TYPE_MAX)
>
> Fix them by removing unnecessary checkings.
>
> Fixes: b9a7ba556207 ("net/mlx5: Use event mask based on device
> capabilities")
> Signed-off-by: Qian Cai <cai@lca.pw>
>
Applied to mlx5-next.
Thanks,
Saeed.
^ permalink raw reply
* Re: [PATCH] tcp: add new tcp_mtu_probe_floor sysctl
From: Josh Hunt @ 2019-07-29 18:50 UTC (permalink / raw)
To: Neal Cardwell; +Cc: Eric Dumazet, netdev, David Miller
In-Reply-To: <CADVnQykOFxm5ms-z0KwxrjFLcOQvixSPosXXn7+4MC3Qee9gKQ@mail.gmail.com>
On 7/29/19 6:12 AM, Neal Cardwell wrote:
> On Sun, Jul 28, 2019 at 5:14 PM Josh Hunt <johunt@akamai.com> wrote:
>>
>> On 7/28/19 6:54 AM, Eric Dumazet wrote:
>>> On Sun, Jul 28, 2019 at 1:21 AM Josh Hunt <johunt@akamai.com> wrote:
>>>>
>>>> On 7/27/19 12:05 AM, Eric Dumazet wrote:
>>>>> On Sat, Jul 27, 2019 at 4:23 AM Josh Hunt <johunt@akamai.com> wrote:
>>>>>>
>>>>>> The current implementation of TCP MTU probing can considerably
>>>>>> underestimate the MTU on lossy connections allowing the MSS to get down to
>>>>>> 48. We have found that in almost all of these cases on our networks these
>>>>>> paths can handle much larger MTUs meaning the connections are being
>>>>>> artificially limited. Even though TCP MTU probing can raise the MSS back up
>>>>>> we have seen this not to be the case causing connections to be "stuck" with
>>>>>> an MSS of 48 when heavy loss is present.
>>>>>>
>>>>>> Prior to pushing out this change we could not keep TCP MTU probing enabled
>>>>>> b/c of the above reasons. Now with a reasonble floor set we've had it
>>>>>> enabled for the past 6 months.
>>>>>
>>>>> And what reasonable value have you used ???
>>>>
>>>> Reasonable for some may not be reasonable for others hence the new
>>>> sysctl :) We're currently running with a fairly high value based off of
>>>> the v6 min MTU minus headers and options, etc. We went conservative with
>>>> our setting initially as it seemed a reasonable first step when
>>>> re-enabling TCP MTU probing since with no configurable floor we saw a #
>>>> of cases where connections were using severely reduced mss b/c of loss
>>>> and not b/c of actual path restriction. I plan to reevaluate the setting
>>>> at some point, but since the probing method is still the same it means
>>>> the same clients who got stuck with mss of 48 before will land at
>>>> whatever floor we set. Looking forward we are interested in trying to
>>>> improve TCP MTU probing so it does not penalize clients like this.
>>>>
>>>> A suggestion for a more reasonable floor default would be 512, which is
>>>> the same as the min_pmtu. Given both mechanisms are trying to achieve
>>>> the same goal it seems like they should have a similar min/floor.
>>>>
>>>>>
>>>>>>
>>>>>> The new sysctl will still default to TCP_MIN_SND_MSS (48), but gives
>>>>>> administrators the ability to control the floor of MSS probing.
>>>>>>
>>>>>> Signed-off-by: Josh Hunt <johunt@akamai.com>
>>>>>> ---
>>>>>> Documentation/networking/ip-sysctl.txt | 6 ++++++
>>>>>> include/net/netns/ipv4.h | 1 +
>>>>>> net/ipv4/sysctl_net_ipv4.c | 9 +++++++++
>>>>>> net/ipv4/tcp_ipv4.c | 1 +
>>>>>> net/ipv4/tcp_timer.c | 2 +-
>>>>>> 5 files changed, 18 insertions(+), 1 deletion(-)
>>>>>>
>>>>>> diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
>>>>>> index df33674799b5..49e95f438ed7 100644
>>>>>> --- a/Documentation/networking/ip-sysctl.txt
>>>>>> +++ b/Documentation/networking/ip-sysctl.txt
>>>>>> @@ -256,6 +256,12 @@ tcp_base_mss - INTEGER
>>>>>> Path MTU discovery (MTU probing). If MTU probing is enabled,
>>>>>> this is the initial MSS used by the connection.
>>>>>>
>>>>>> +tcp_mtu_probe_floor - INTEGER
>>>>>> + If MTU probing is enabled this caps the minimum MSS used for search_low
>>>>>> + for the connection.
>>>>>> +
>>>>>> + Default : 48
>>>>>> +
>>>>>> tcp_min_snd_mss - INTEGER
>>>>>> TCP SYN and SYNACK messages usually advertise an ADVMSS option,
>>>>>> as described in RFC 1122 and RFC 6691.
>>>>>> diff --git a/include/net/netns/ipv4.h b/include/net/netns/ipv4.h
>>>>>> index bc24a8ec1ce5..c0c0791b1912 100644
>>>>>> --- a/include/net/netns/ipv4.h
>>>>>> +++ b/include/net/netns/ipv4.h
>>>>>> @@ -116,6 +116,7 @@ struct netns_ipv4 {
>>>>>> int sysctl_tcp_l3mdev_accept;
>>>>>> #endif
>>>>>> int sysctl_tcp_mtu_probing;
>>>>>> + int sysctl_tcp_mtu_probe_floor;
>>>>>> int sysctl_tcp_base_mss;
>>>>>> int sysctl_tcp_min_snd_mss;
>>>>>> int sysctl_tcp_probe_threshold;
>>>>>> diff --git a/net/ipv4/sysctl_net_ipv4.c b/net/ipv4/sysctl_net_ipv4.c
>>>>>> index 0b980e841927..59ded25acd04 100644
>>>>>> --- a/net/ipv4/sysctl_net_ipv4.c
>>>>>> +++ b/net/ipv4/sysctl_net_ipv4.c
>>>>>> @@ -820,6 +820,15 @@ static struct ctl_table ipv4_net_table[] = {
>>>>>> .extra2 = &tcp_min_snd_mss_max,
>>>>>> },
>>>>>> {
>>>>>> + .procname = "tcp_mtu_probe_floor",
>>>>>> + .data = &init_net.ipv4.sysctl_tcp_mtu_probe_floor,
>>>>>> + .maxlen = sizeof(int),
>>>>>> + .mode = 0644,
>>>>>> + .proc_handler = proc_dointvec_minmax,
>>>>>> + .extra1 = &tcp_min_snd_mss_min,
>>>>>> + .extra2 = &tcp_min_snd_mss_max,
>>>>>> + },
>>>>>> + {
>>>>>> .procname = "tcp_probe_threshold",
>>>>>> .data = &init_net.ipv4.sysctl_tcp_probe_threshold,
>>>>>> .maxlen = sizeof(int),
>>>>>> diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
>>>>>> index d57641cb3477..e0a372676329 100644
>>>>>> --- a/net/ipv4/tcp_ipv4.c
>>>>>> +++ b/net/ipv4/tcp_ipv4.c
>>>>>> @@ -2637,6 +2637,7 @@ static int __net_init tcp_sk_init(struct net *net)
>>>>>> net->ipv4.sysctl_tcp_min_snd_mss = TCP_MIN_SND_MSS;
>>>>>> net->ipv4.sysctl_tcp_probe_threshold = TCP_PROBE_THRESHOLD;
>>>>>> net->ipv4.sysctl_tcp_probe_interval = TCP_PROBE_INTERVAL;
>>>>>> + net->ipv4.sysctl_tcp_mtu_probe_floor = TCP_MIN_SND_MSS;
>>>>>>
>>>>>> net->ipv4.sysctl_tcp_keepalive_time = TCP_KEEPALIVE_TIME;
>>>>>> net->ipv4.sysctl_tcp_keepalive_probes = TCP_KEEPALIVE_PROBES;
>>>>>> diff --git a/net/ipv4/tcp_timer.c b/net/ipv4/tcp_timer.c
>>>>>> index c801cd37cc2a..dbd9d2d0ee63 100644
>>>>>> --- a/net/ipv4/tcp_timer.c
>>>>>> +++ b/net/ipv4/tcp_timer.c
>>>>>> @@ -154,7 +154,7 @@ static void tcp_mtu_probing(struct inet_connection_sock *icsk, struct sock *sk)
>>>>>> } else {
>>>>>> mss = tcp_mtu_to_mss(sk, icsk->icsk_mtup.search_low) >> 1;
>>>>>> mss = min(net->ipv4.sysctl_tcp_base_mss, mss);
>>>>>> - mss = max(mss, 68 - tcp_sk(sk)->tcp_header_len);
>>>>>> + mss = max(mss, net->ipv4.sysctl_tcp_mtu_probe_floor);
>>>>>> mss = max(mss, net->ipv4.sysctl_tcp_min_snd_mss);
>>>>>> icsk->icsk_mtup.search_low = tcp_mss_to_mtu(sk, mss);
>>>>>> }
>>>>>
>>>>>
>>>>> Existing sysctl should be enough ?
>>>>
>>>> I don't think so. Changing tcp_min_snd_mss could impact clients that
>>>> really want/need a small mss. When you added the new sysctl I tried to
>>>> analyze the mss values we're seeing to understand what we could possibly
>>>> raise it to. While not a huge amount, we see more clients than I
>>>> expected announcing mss values in the 180-512 range. Given that I would
>>>> not feel comfortable setting tcp_min_snd_mss to say 512 as I suggested
>>>> above.
>>>
>>> If these clients need mss values in 180-512 ranges, how MTU probing
>>> would work for them,
>>> if you set a floor to 512 ?
>>
>> First, we already seem to be fine with ignoring these paths with ICMP
>> based PMTU discovery b/c of our min_pmtu default of 512 and that is
>> configurable. Second by adding this sysctl we're giving administrators
>> the choice to decide if they'd like to attempt to support these very
>> very small # of paths which may be below 512 (MSS <= 512 does not mean
>> MTU <= 512) or cover themselves by being able to raise the floor to not
>> penalize clients who may be on very lossy networks.
>>
>>>
>>> Are we sure the intent of tcp_base_mss was not to act as a floor ?
>>
>> My understanding is that tcp_base_mss is meant to be the initial value
>> of search_low (as per Docs). Then in RFC 4821 [1] Sections 7.2, shows
>> search_low should be configurable, and 7.7 we see that in response to
>> successive black hole detection search_low should be halved. So I don't
>> think it was meant to be a floor, but just the initial search_low param.
>
> That matches my reading of the RFC and code as well. But in that case
> IMHO an additional commit should fix this comment to reflect the fact
> thatTCP_BASE_MSS is the initial value, rather than a floor:
>
> diff --git a/include/net/tcp.h b/include/net/tcp.h
> index 42728239cdbe..05575ac70333 100644
> --- a/include/net/tcp.h
> +++ b/include/net/tcp.h
> @@ -75,7 +75,7 @@ void tcp_time_wait(struct sock *sk, int state, int timeo);
> /* Minimal accepted MSS. It is (60+60+8) - (20+20). */
> #define TCP_MIN_MSS 88U
>
> -/* The least MTU to use for probing */
> +/* The initial MTU to use for probing */
> #define TCP_BASE_MSS 1024
>
> /* probing interval, default to 10 minutes as per RFC4821 */
Good catch. Agreed. That comment is misleading.
Josh
^ permalink raw reply
* Re: [PATCH v3 5/7] mfd: ioc3: Add driver for SGI IOC3 chip
From: Thomas Bogendoerfer @ 2019-07-29 18:45 UTC (permalink / raw)
To: Lee Jones
Cc: Ralf Baechle, Paul Burton, James Hogan, Dmitry Torokhov,
David S. Miller, Srinivas Kandagatla, Alessandro Zummo,
Alexandre Belloni, Greg Kroah-Hartman, Jiri Slaby, linux-mips,
linux-kernel, linux-input, netdev, linux-rtc, linux-serial
In-Reply-To: <20190725114716.GB23883@dell>
On Thu, 25 Jul 2019 12:47:16 +0100
Lee Jones <lee.jones@linaro.org> wrote:
> On Thu, 13 Jun 2019, Thomas Bogendoerfer wrote:
> > +/*
> > + * On IP30 the RTC (a DS1687) is behind the IOC3 on the generic
> > + * ByteBus regions. We have to write the RTC address of interest to
> > + * IOC3_BYTEBUS_DEV1, then read the data from IOC3_BYTEBUS_DEV2.
> > + * rtc->regs already points to IOC3_BYTEBUS_DEV1.
> > + */
> > +#define IP30_RTC_ADDR(rtc) (rtc->regs)
> > +#define IP30_RTC_DATA(rtc) ((rtc->regs) + IOC3_BYTEBUS_DEV2 - IOC3_BYTEBUS_DEV1)
> > +
> > +static u8 ip30_rtc_read(struct ds1685_priv *rtc, int reg)
> > +{
> > + writeb((reg & 0x7f), IP30_RTC_ADDR(rtc));
> > + return readb(IP30_RTC_DATA(rtc));
> > +}
> > +
> > +static void ip30_rtc_write(struct ds1685_priv *rtc, int reg, u8 value)
> > +{
> > + writeb((reg & 0x7f), IP30_RTC_ADDR(rtc));
> > + writeb(value, IP30_RTC_DATA(rtc));
> > +}
>
> Why is this not in the RTC driver?
because rtc1685 is used in different systems and accessing the chip
differs between those systems.
> > +static struct ds1685_rtc_platform_data ip30_rtc_platform_data = {
> > + .bcd_mode = false,
> > + .no_irq = false,
> > + .uie_unsupported = true,
> > + .alloc_io_resources = true,
>
> > + .plat_read = ip30_rtc_read,
> > + .plat_write = ip30_rtc_write,
>
> Call-backs in a non-subsystem API is pretty ugly IMHO.
I agree
> Where are these called from?
drivers/rtc/rtc-ds1685.c
I could do the same as done for serial8250 and add an additional .c file
in drivers/rtc which handles this for SGI-IP30. Alexandre would this work
for you as well ?
> > +#define IOC3_SID(_name, _sid, _setup) \
> > + { \
> > + .name = _name, \
> > + .sid = (PCI_VENDOR_ID_SGI << 16) | IOC3_SUBSYS_ ## _sid, \
> > + .setup = _setup, \
> > + }
> > +
> > +static struct {
> > + const char *name;
> > + u32 sid;
> > + int (*setup)(struct ioc3_priv_data *ipd);
> > +} ioc3_infos[] = {
>
> IMHO it's neater if you separate the definition and static data part.
I don't quite understand what you mean here. Should I move the #define at
the beginning of the file ? Why is it neater ?
Thomas.
--
SUSE Linux GmbH
GF: Felix Imendörffer, Mary Higgins, Sri Rasiah
HRB 21284 (AG Nürnberg)
^ permalink raw reply
* Re: [PULL] vhost,virtio: cleanups and fixes
From: pr-tracker-bot @ 2019-07-29 18:40 UTC (permalink / raw)
To: Michael S. Tsirkin
Cc: Linus Torvalds, kvm, virtualization, netdev, linux-kernel,
eric.auger, jean-philippe, jroedel, mst, namit, wei.w.wang
In-Reply-To: <20190729121605-mutt-send-email-mst@kernel.org>
The pull request you sent on Mon, 29 Jul 2019 12:16:05 -0400:
> git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost.git tags/for_linus
has been merged into torvalds/linux.git:
https://git.kernel.org/torvalds/c/2a11c76e5301dddefcb618dac04f74e6314df6bc
Thank you!
--
Deet-doot-dot, I am a bot.
https://korg.wiki.kernel.org/userdoc/prtracker
^ permalink raw reply
* [PATCH net v2] mlxsw: spectrum_ptp: Increase parsing depth when PTP is enabled
From: Petr Machata @ 2019-07-29 18:26 UTC (permalink / raw)
To: netdev@vger.kernel.org
Cc: Petr Machata, Jiri Pirko, Ido Schimmel, davem@davemloft.net
Spectrum systems have a configurable limit on how far into the packet they
parse. By default, the limit is 96 bytes.
An IPv6 PTP packet is layered as Ethernet/IPv6/UDP (14+40+8 bytes), and
sequence ID of a PTP event is only available 32 bytes into payload, for a
total of 94 bytes. When an additional 802.1q header is present as
well (such as when ptp4l is running on a VLAN port), the parsing limit is
exceeded. Such packets are not recognized as PTP, and are not timestamped.
Therefore generalize the current VXLAN-specific parsing depth setting to
allow reference-counted requests from other modules as well. Keep it in the
VXLAN module, because the MPRS register also configures UDP destination
port number used for VXLAN, and is thus closely tied to the VXLAN code
anyway.
Then invoke the new interfaces from both VXLAN (in obvious places), as well
as from PTP code, when the (global) timestamping configuration changes from
disabled to enabled or vice versa.
Fixes: 8748642751ed ("mlxsw: spectrum: PTP: Support SIOCGHWTSTAMP, SIOCSHWTSTAMP ioctls")
Signed-off-by: Petr Machata <petrm@mellanox.com>
---
Notes:
v2:
- Preserve RXT in mlxsw_sp1_ptp_mtpppc_update()
.../net/ethernet/mellanox/mlxsw/spectrum.h | 4 +
.../ethernet/mellanox/mlxsw/spectrum_nve.c | 1 +
.../ethernet/mellanox/mlxsw/spectrum_nve.h | 1 +
.../mellanox/mlxsw/spectrum_nve_vxlan.c | 76 ++++++++++++++-----
.../ethernet/mellanox/mlxsw/spectrum_ptp.c | 17 +++++
5 files changed, 82 insertions(+), 17 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h
index 131f62ce9297..6664119fb0c8 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h
@@ -951,4 +951,8 @@ void mlxsw_sp_port_nve_fini(struct mlxsw_sp_port *mlxsw_sp_port);
int mlxsw_sp_nve_init(struct mlxsw_sp *mlxsw_sp);
void mlxsw_sp_nve_fini(struct mlxsw_sp *mlxsw_sp);
+/* spectrum_nve_vxlan.c */
+int mlxsw_sp_nve_inc_parsing_depth_get(struct mlxsw_sp *mlxsw_sp);
+void mlxsw_sp_nve_inc_parsing_depth_put(struct mlxsw_sp *mlxsw_sp);
+
#endif
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.c
index 1df164a4b06d..17f334b46c40 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.c
@@ -775,6 +775,7 @@ static void mlxsw_sp_nve_tunnel_fini(struct mlxsw_sp *mlxsw_sp)
ops->fini(nve);
mlxsw_sp_kvdl_free(mlxsw_sp, MLXSW_SP_KVDL_ENTRY_TYPE_ADJ, 1,
nve->tunnel_index);
+ memset(&nve->config, 0, sizeof(nve->config));
}
nve->num_nve_tunnels--;
}
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.h b/drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.h
index 0035640156a1..12f664f42f21 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.h
@@ -29,6 +29,7 @@ struct mlxsw_sp_nve {
unsigned int num_max_mc_entries[MLXSW_SP_L3_PROTO_MAX];
u32 tunnel_index;
u16 ul_rif_index; /* Reserved for Spectrum */
+ unsigned int inc_parsing_depth_refs;
};
struct mlxsw_sp_nve_ops {
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_nve_vxlan.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_nve_vxlan.c
index 93ccd9fc2266..05517c7feaa5 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_nve_vxlan.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_nve_vxlan.c
@@ -103,9 +103,9 @@ static void mlxsw_sp_nve_vxlan_config(const struct mlxsw_sp_nve *nve,
config->udp_dport = cfg->dst_port;
}
-static int mlxsw_sp_nve_parsing_set(struct mlxsw_sp *mlxsw_sp,
- unsigned int parsing_depth,
- __be16 udp_dport)
+static int __mlxsw_sp_nve_parsing_set(struct mlxsw_sp *mlxsw_sp,
+ unsigned int parsing_depth,
+ __be16 udp_dport)
{
char mprs_pl[MLXSW_REG_MPRS_LEN];
@@ -113,6 +113,56 @@ static int mlxsw_sp_nve_parsing_set(struct mlxsw_sp *mlxsw_sp,
return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(mprs), mprs_pl);
}
+static int mlxsw_sp_nve_parsing_set(struct mlxsw_sp *mlxsw_sp,
+ __be16 udp_dport)
+{
+ int parsing_depth = mlxsw_sp->nve->inc_parsing_depth_refs ?
+ MLXSW_SP_NVE_VXLAN_PARSING_DEPTH :
+ MLXSW_SP_NVE_DEFAULT_PARSING_DEPTH;
+
+ return __mlxsw_sp_nve_parsing_set(mlxsw_sp, parsing_depth, udp_dport);
+}
+
+static int
+__mlxsw_sp_nve_inc_parsing_depth_get(struct mlxsw_sp *mlxsw_sp,
+ __be16 udp_dport)
+{
+ int err;
+
+ mlxsw_sp->nve->inc_parsing_depth_refs++;
+
+ err = mlxsw_sp_nve_parsing_set(mlxsw_sp, udp_dport);
+ if (err)
+ goto err_nve_parsing_set;
+ return 0;
+
+err_nve_parsing_set:
+ mlxsw_sp->nve->inc_parsing_depth_refs--;
+ return err;
+}
+
+static void
+__mlxsw_sp_nve_inc_parsing_depth_put(struct mlxsw_sp *mlxsw_sp,
+ __be16 udp_dport)
+{
+ mlxsw_sp->nve->inc_parsing_depth_refs--;
+ mlxsw_sp_nve_parsing_set(mlxsw_sp, udp_dport);
+}
+
+int mlxsw_sp_nve_inc_parsing_depth_get(struct mlxsw_sp *mlxsw_sp)
+{
+ __be16 udp_dport = mlxsw_sp->nve->config.udp_dport;
+
+ return __mlxsw_sp_nve_inc_parsing_depth_get(mlxsw_sp, udp_dport);
+}
+
+void mlxsw_sp_nve_inc_parsing_depth_put(struct mlxsw_sp *mlxsw_sp)
+{
+ __be16 udp_dport = mlxsw_sp->nve->config.udp_dport;
+
+ __mlxsw_sp_nve_inc_parsing_depth_put(mlxsw_sp, udp_dport);
+}
+
static void
mlxsw_sp_nve_vxlan_config_prepare(char *tngcr_pl,
const struct mlxsw_sp_nve_config *config)
@@ -176,9 +226,7 @@ static int mlxsw_sp1_nve_vxlan_init(struct mlxsw_sp_nve *nve,
struct mlxsw_sp *mlxsw_sp = nve->mlxsw_sp;
int err;
- err = mlxsw_sp_nve_parsing_set(mlxsw_sp,
- MLXSW_SP_NVE_VXLAN_PARSING_DEPTH,
- config->udp_dport);
+ err = __mlxsw_sp_nve_inc_parsing_depth_get(mlxsw_sp, config->udp_dport);
if (err)
return err;
@@ -203,8 +251,7 @@ static int mlxsw_sp1_nve_vxlan_init(struct mlxsw_sp_nve *nve,
err_rtdp_set:
mlxsw_sp1_nve_vxlan_config_clear(mlxsw_sp);
err_config_set:
- mlxsw_sp_nve_parsing_set(mlxsw_sp, MLXSW_SP_NVE_DEFAULT_PARSING_DEPTH,
- config->udp_dport);
+ __mlxsw_sp_nve_inc_parsing_depth_put(mlxsw_sp, 0);
return err;
}
@@ -216,8 +263,7 @@ static void mlxsw_sp1_nve_vxlan_fini(struct mlxsw_sp_nve *nve)
mlxsw_sp_router_nve_demote_decap(mlxsw_sp, config->ul_tb_id,
config->ul_proto, &config->ul_sip);
mlxsw_sp1_nve_vxlan_config_clear(mlxsw_sp);
- mlxsw_sp_nve_parsing_set(mlxsw_sp, MLXSW_SP_NVE_DEFAULT_PARSING_DEPTH,
- config->udp_dport);
+ __mlxsw_sp_nve_inc_parsing_depth_put(mlxsw_sp, 0);
}
static int
@@ -320,9 +366,7 @@ static int mlxsw_sp2_nve_vxlan_init(struct mlxsw_sp_nve *nve,
struct mlxsw_sp *mlxsw_sp = nve->mlxsw_sp;
int err;
- err = mlxsw_sp_nve_parsing_set(mlxsw_sp,
- MLXSW_SP_NVE_VXLAN_PARSING_DEPTH,
- config->udp_dport);
+ err = __mlxsw_sp_nve_inc_parsing_depth_get(mlxsw_sp, config->udp_dport);
if (err)
return err;
@@ -348,8 +392,7 @@ static int mlxsw_sp2_nve_vxlan_init(struct mlxsw_sp_nve *nve,
err_rtdp_set:
mlxsw_sp2_nve_vxlan_config_clear(mlxsw_sp);
err_config_set:
- mlxsw_sp_nve_parsing_set(mlxsw_sp, MLXSW_SP_NVE_DEFAULT_PARSING_DEPTH,
- config->udp_dport);
+ __mlxsw_sp_nve_inc_parsing_depth_put(mlxsw_sp, 0);
return err;
}
@@ -361,8 +404,7 @@ static void mlxsw_sp2_nve_vxlan_fini(struct mlxsw_sp_nve *nve)
mlxsw_sp_router_nve_demote_decap(mlxsw_sp, config->ul_tb_id,
config->ul_proto, &config->ul_sip);
mlxsw_sp2_nve_vxlan_config_clear(mlxsw_sp);
- mlxsw_sp_nve_parsing_set(mlxsw_sp, MLXSW_SP_NVE_DEFAULT_PARSING_DEPTH,
- config->udp_dport);
+ __mlxsw_sp_nve_inc_parsing_depth_put(mlxsw_sp, 0);
}
const struct mlxsw_sp_nve_ops mlxsw_sp2_nve_vxlan_ops = {
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c
index bd9c2bc2d5d6..98c5ba3200bc 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c
@@ -979,6 +979,9 @@ static int mlxsw_sp1_ptp_mtpppc_update(struct mlxsw_sp_port *mlxsw_sp_port,
{
struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp;
struct mlxsw_sp_port *tmp;
+ u16 orig_ing_types = 0;
+ u16 orig_egr_types = 0;
+ int err;
int i;
/* MTPPPC configures timestamping globally, not per port. Find the
@@ -986,12 +989,26 @@ static int mlxsw_sp1_ptp_mtpppc_update(struct mlxsw_sp_port *mlxsw_sp_port,
*/
for (i = 1; i < mlxsw_core_max_ports(mlxsw_sp->core); i++) {
tmp = mlxsw_sp->ports[i];
+ if (tmp) {
+ orig_ing_types |= tmp->ptp.ing_types;
+ orig_egr_types |= tmp->ptp.egr_types;
+ }
if (tmp && tmp != mlxsw_sp_port) {
ing_types |= tmp->ptp.ing_types;
egr_types |= tmp->ptp.egr_types;
}
}
+ if ((ing_types || egr_types) && !(orig_egr_types || orig_egr_types)) {
+ err = mlxsw_sp_nve_inc_parsing_depth_get(mlxsw_sp);
+ if (err) {
+ netdev_err(mlxsw_sp_port->dev, "Failed to increase parsing depth");
+ return err;
+ }
+ }
+ if (!(ing_types || egr_types) && (orig_egr_types || orig_egr_types))
+ mlxsw_sp_nve_inc_parsing_depth_put(mlxsw_sp);
+
return mlxsw_sp1_ptp_mtpppc_set(mlxsw_sp_port->mlxsw_sp,
ing_types, egr_types);
}
--
2.20.1
^ permalink raw reply related
* Re: [PATCH net] net/mlx5e: Fix unnecessary flow_block_cb_is_busy call
From: Saeed Mahameed @ 2019-07-29 18:25 UTC (permalink / raw)
To: wenxu@ucloud.cn, netdev@vger.kernel.org, davem@davemloft.net
In-Reply-To: <1564239595-23786-1-git-send-email-wenxu@ucloud.cn>
On Sat, 2019-07-27 at 22:59 +0800, wenxu@ucloud.cn wrote:
> From: wenxu <wenxu@ucloud.cn>
>
> When call flow_block_cb_is_busy. The indr_priv is guaranteed to
> NULL ptr. So there is no need to call flow_bock_cb_is_busy.
>
> Fixes: 0d4fd02e7199 ("net: flow_offload: add flow_block_cb_is_busy()
> and use it")
> Signed-off-by: wenxu <wenxu@ucloud.cn>
> ---
> drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 4 ----
> 1 file changed, 4 deletions(-)
>
> diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
> b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
> index 7f747cb..496d303 100644
> --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
> +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
> @@ -722,10 +722,6 @@ static void mlx5e_rep_indr_tc_block_unbind(void
> *cb_priv)
> if (indr_priv)
> return -EEXIST;
>
> - if
> (flow_block_cb_is_busy(mlx5e_rep_indr_setup_block_cb,
> - indr_priv,
> &mlx5e_block_cb_list))
> - return -EBUSY;
> -
> indr_priv = kmalloc(sizeof(*indr_priv), GFP_KERNEL);
> if (!indr_priv)
> return -ENOMEM;
Indeed flow_block_cb_is_busy is redundant and will always return false
in this path.
This is net-next material.
Dave let me know if you want me to take it to my branch.
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
^ permalink raw reply
* Re: [PATCH net] mlxsw: spectrum_ptp: Increase parsing depth when PTP is enabled
From: Petr Machata @ 2019-07-29 18:16 UTC (permalink / raw)
To: David Miller
Cc: idosch@idosch.org, netdev@vger.kernel.org, Jiri Pirko, mlxsw,
Ido Schimmel
In-Reply-To: <20190729.105623.1884187062066808743.davem@davemloft.net>
David Miller <davem@davemloft.net> writes:
> From: Ido Schimmel <idosch@idosch.org>
> Date: Sat, 27 Jul 2019 20:35:32 +0300
>
>> @@ -979,19 +979,36 @@ static int mlxsw_sp1_ptp_mtpppc_update(struct mlxsw_sp_port *mlxsw_sp_port,
>> {
>> struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp;
>> struct mlxsw_sp_port *tmp;
>> + u16 orig_ing_types = 0;
>> + u16 orig_egr_types = 0;
>> int i;
>> + int err;
>
> Please preserve the reverse christmas tree here, thank you.
All right, will respin momentarily.
^ permalink raw reply
* Re: [PATCH] net: spider_net: Mark expected switch fall-through
From: David Miller @ 2019-07-29 18:12 UTC (permalink / raw)
To: gustavo; +Cc: kou.ishizaki, netdev, linux-kernel, sfr, keescook
In-Reply-To: <20190729003251.GA25556@embeddedor>
From: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Date: Sun, 28 Jul 2019 19:32:51 -0500
> Mark switch cases where we are expecting to fall through.
>
> This patch fixes the following warning:
>
> drivers/net/ethernet/toshiba/spider_net.c: In function 'spider_net_release_tx_chain':
> drivers/net/ethernet/toshiba/spider_net.c:783:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
> if (!brutal) {
> ^
> drivers/net/ethernet/toshiba/spider_net.c:792:3: note: here
> case SPIDER_NET_DESCR_RESPONSE_ERROR:
> ^~~~
>
> Notice that, in this particular case, the code comment is
> modified in accordance with what GCC is expecting to find.
>
> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Applied.
^ permalink raw reply
* Re: [PATCH] net: ehea: Mark expected switch fall-through
From: David Miller @ 2019-07-29 18:12 UTC (permalink / raw)
To: gustavo; +Cc: dougmill, netdev, linux-kernel, sfr, keescook
In-Reply-To: <20190729003009.GA25425@embeddedor>
From: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Date: Sun, 28 Jul 2019 19:30:09 -0500
> Mark switch cases where we are expecting to fall through.
>
> This patch fixes the following warning:
>
> drivers/net/ethernet/ibm/ehea/ehea_main.c: In function 'ehea_mem_notifier':
> include/linux/printk.h:311:2: warning: this statement may fall through [-Wimplicit-fallthrough=]
> printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> drivers/net/ethernet/ibm/ehea/ehea_main.c:3253:3: note: in expansion of macro 'pr_info'
> pr_info("memory offlining canceled");
> ^~~~~~~
> drivers/net/ethernet/ibm/ehea/ehea_main.c:3256:2: note: here
> case MEM_ONLINE:
> ^~~~
>
> Notice that, in this particular case, the code comment is
> modified in accordance with what GCC is expecting to find.
>
> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Applied.
^ permalink raw reply
* Re: [PATCH net v2] mvpp2: refactor the HW checksum setup
From: David Miller @ 2019-07-29 18:09 UTC (permalink / raw)
To: mcroce; +Cc: netdev, antoine.tenart, maxime.chevallier, mw, stefanc,
linux-kernel
In-Reply-To: <20190728173549.32034-1-mcroce@redhat.com>
From: Matteo Croce <mcroce@redhat.com>
Date: Sun, 28 Jul 2019 19:35:49 +0200
> The hardware can only offload checksum calculation on first port due to
> the Tx FIFO size limitation, and has a maximum L3 offset of 128 bytes.
> Document this in a comment and move duplicated code in a function.
>
> Fixes: 576193f2d579 ("net: mvpp2: jumbo frames support")
> Signed-off-by: Matteo Croce <mcroce@redhat.com>
Applied.
^ permalink raw reply
* Re: [patch net] net: fix ifindex collision during namespace removal
From: David Miller @ 2019-07-29 18:08 UTC (permalink / raw)
To: jiri
Cc: netdev, xemul, edumazet, pabeni, idosch, petrm, sd, f.fainelli,
stephen, mlxsw, jiri
In-Reply-To: <20190728125636.13895-1-jiri@resnulli.us>
From: Jiri Pirko <jiri@resnulli.us>
Date: Sun, 28 Jul 2019 14:56:36 +0200
> From: Jiri Pirko <jiri@mellanox.com>
>
> Commit aca51397d014 ("netns: Fix arbitrary net_device-s corruptions
> on net_ns stop.") introduced a possibility to hit a BUG in case device
> is returning back to init_net and two following conditions are met:
> 1) dev->ifindex value is used in a name of another "dev%d"
> device in init_net.
> 2) dev->name is used by another device in init_net.
>
> Under real life circumstances this is hard to get. Therefore this has
> been present happily for over 10 years. To reproduce:
...
> Fix this by checking if a device with the same name exists in init_net
> and fallback to original code - dev%d to allocate name - in case it does.
>
> This was found using syzkaller.
>
> Fixes: aca51397d014 ("netns: Fix arbitrary net_device-s corruptions on net_ns stop.")
> Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Very interesting :)
Applied and queued up for -stable, thanks.
^ permalink raw reply
* Re: tcan4x5x on a Raspberry Pi
From: Dan Murphy @ 2019-07-29 18:07 UTC (permalink / raw)
To: FIXED-TERM Buecheler Konstantin (ETAS-SEC/ECT-Mu),
linux-can@vger.kernel.org, netdev@vger.kernel.org
In-Reply-To: <845ea24f71b74b42821c7fce20bc0476@escrypt.com>
Konstantin
On 7/29/19 6:19 AM, FIXED-TERM Buecheler Konstantin (ETAS-SEC/ECT-Mu) wrote:
> Hi all,
>
> I am currently working on a project where I am trying to use the tcan4550 chip with a Raspberry PI 3B.
> I am struggling to create a working device tree overlay file for the Raspberry Pi.
> Has anyone here tried this already? I would appreciate any help.
Are you using the driver from net-next?
https://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git/tree/drivers/net/can/m_can
DT documentation here
https://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git/tree/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
I did the development on a BeagleBone Black.
Dan
> Thanks,
> Konstantin
>
^ permalink raw reply
* Re: [PATCH net-next] r8169: make use of xmit_more
From: David Miller @ 2019-07-29 18:05 UTC (permalink / raw)
To: hkallweit1; +Cc: nic_swsd, netdev, linux, edumazet
In-Reply-To: <2950b2f7-7460-cce0-d964-ad654d897295@gmail.com>
From: Heiner Kallweit <hkallweit1@gmail.com>
Date: Sun, 28 Jul 2019 11:25:19 +0200
> There was a previous attempt to use xmit_more, but the change had to be
> reverted because under load sometimes a transmit timeout occurred [0].
> Maybe this was caused by a missing memory barrier, the new attempt
> keeps the memory barrier before the call to netif_stop_queue like it
> is used by the driver as of today. The new attempt also changes the
> order of some calls as suggested by Eric.
>
> [0] https://lkml.org/lkml/2019/2/10/39
>
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Applied.
^ permalink raw reply
* Re: [PATCH net-next v3 2/2] qed: Add driver API for flashing the config attributes.
From: David Miller @ 2019-07-29 18:03 UTC (permalink / raw)
To: skalluru; +Cc: netdev, mkalderon, aelior
In-Reply-To: <20190728015549.27051-3-skalluru@marvell.com>
From: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Date: Sat, 27 Jul 2019 18:55:49 -0700
> @@ -2268,6 +2330,9 @@ static int qed_nvm_flash(struct qed_dev *cdev, const char *name)
> rc = qed_nvm_flash_image_access(cdev, &data,
> &check_resp);
> break;
> + case QED_NVM_FLASH_CMD_NVM_CFG_ID:
> + rc = qed_nvm_flash_cfg_write(cdev, &data);
> + break;
> default:
> DP_ERR(cdev, "Unknown command %08x\n", cmd_type);
I don't see how any existing portable interface can cause this new code to
actually be used.
You have to explain this to me.
^ permalink raw reply
* Re: [PATCH net v2] mvpp2: refactor MTU change code
From: David Miller @ 2019-07-29 18:01 UTC (permalink / raw)
To: mcroce; +Cc: netdev, antoine.tenart, maxime.chevallier, mw, stefanc,
linux-kernel
In-Reply-To: <20190728004645.4807-1-mcroce@redhat.com>
From: Matteo Croce <mcroce@redhat.com>
Date: Sun, 28 Jul 2019 02:46:45 +0200
> The MTU change code can call napi_disable() with the device already down,
> leading to a deadlock. Also, lot of code is duplicated unnecessarily.
>
> Rework mvpp2_change_mtu() to avoid the deadlock and remove duplicated code.
>
> Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
> Signed-off-by: Matteo Croce <mcroce@redhat.com>
Applied and queued up for -stable, thanks.
^ permalink raw reply
* Re: [PATCH] rocker: fix memory leaks of fib_work on two error return paths
From: David Miller @ 2019-07-29 17:59 UTC (permalink / raw)
To: colin.king; +Cc: dsahern, jiri, netdev, kernel-janitors, linux-kernel
In-Reply-To: <20190727233726.3121-1-colin.king@canonical.com>
From: Colin King <colin.king@canonical.com>
Date: Sun, 28 Jul 2019 00:37:26 +0100
> From: Colin Ian King <colin.king@canonical.com>
>
> Currently there are two error return paths that leak memory allocated
> to fib_work. Fix this by kfree'ing fib_work before returning.
>
> Addresses-Coverity: ("Resource leak")
> Fixes: 19a9d136f198 ("ipv4: Flag fib_info with a fib_nh using IPv6 gateway")
> Fixes: dbcc4fa718ee ("rocker: Fail attempts to use routes with nexthop objects")
> Signed-off-by: Colin Ian King <colin.king@canonical.com>
Applied.
^ permalink raw reply
* Re: [PATCH] net: stmmac: manage errors returned by of_get_mac_address()
From: David Miller @ 2019-07-29 17:57 UTC (permalink / raw)
To: martin.blumenstingl
Cc: peppe.cavallaro, alexandre.torgue, joabreu, netdev,
linux-arm-kernel, linux-kernel, linux-amlogic
In-Reply-To: <20190727192137.27881-1-martin.blumenstingl@googlemail.com>
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Date: Sat, 27 Jul 2019 21:21:37 +0200
> Commit d01f449c008a ("of_net: add NVMEM support to of_get_mac_address")
> added support for reading the MAC address from an nvmem-cell. This
> required changing the logic to return an error pointer upon failure.
>
> If stmmac is loaded before the nvmem provider driver then
> of_get_mac_address() return an error pointer with -EPROBE_DEFER.
>
> Propagate this error so the stmmac driver will be probed again after the
> nvmem provider driver is loaded.
> Default to a random generated MAC address in case of any other error,
> instead of using the error pointer as MAC address.
>
> Fixes: d01f449c008a ("of_net: add NVMEM support to of_get_mac_address")
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Applied, thanks.
^ permalink raw reply
* Re: [PATCH net] mlxsw: spectrum_ptp: Increase parsing depth when PTP is enabled
From: David Miller @ 2019-07-29 17:56 UTC (permalink / raw)
To: idosch; +Cc: netdev, jiri, petrm, mlxsw, idosch
In-Reply-To: <20190727173532.7231-1-idosch@idosch.org>
From: Ido Schimmel <idosch@idosch.org>
Date: Sat, 27 Jul 2019 20:35:32 +0300
> @@ -979,19 +979,36 @@ static int mlxsw_sp1_ptp_mtpppc_update(struct mlxsw_sp_port *mlxsw_sp_port,
> {
> struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp;
> struct mlxsw_sp_port *tmp;
> + u16 orig_ing_types = 0;
> + u16 orig_egr_types = 0;
> int i;
> + int err;
Please preserve the reverse christmas tree here, thank you.
^ permalink raw reply
* Re: [PATCH net] net/mlx5e: Fix unnecessary flow_block_cb_is_busy call
From: David Miller @ 2019-07-29 17:56 UTC (permalink / raw)
To: wenxu; +Cc: netdev, saeedm
In-Reply-To: <1564239595-23786-1-git-send-email-wenxu@ucloud.cn>
From: wenxu@ucloud.cn
Date: Sat, 27 Jul 2019 22:59:55 +0800
> From: wenxu <wenxu@ucloud.cn>
>
> When call flow_block_cb_is_busy. The indr_priv is guaranteed to
> NULL ptr. So there is no need to call flow_bock_cb_is_busy.
>
> Fixes: 0d4fd02e7199 ("net: flow_offload: add flow_block_cb_is_busy() and use it")
> Signed-off-by: wenxu <wenxu@ucloud.cn>
I need a review on this.
^ permalink raw reply
* [PATCH V4 3/3] net: dsa: ksz: Add Microchip KSZ8795 DSA driver
From: Marek Vasut @ 2019-07-29 17:49 UTC (permalink / raw)
To: netdev
Cc: Tristram Ha, Marek Vasut, Andrew Lunn, David S . Miller,
Florian Fainelli, Vivien Didelot, Woojung Huh
In-Reply-To: <20190729174947.10103-1-marex@denx.de>
From: Tristram Ha <Tristram.Ha@microchip.com>
Add Microchip KSZ8795 DSA driver.
Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: David S. Miller <davem@davemloft.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Woojung Huh <woojung.huh@microchip.com>
---
V2: - Use reverse xmas tree for variable declaration
- Use BIT() macro where applicable
- Use regmap_update_bits() where applicable
- Replace ad-hoc stp_multicast_addr[] with ether_addr_copy(..., eth_stp_addr)
V3: - Drop ksz8795_phy_setup()
V4: - Update Kconfig entries, to not select the KSZ8795_DSA_TAG, which was removed
---
drivers/net/dsa/microchip/Kconfig | 17 +
drivers/net/dsa/microchip/Makefile | 2 +
drivers/net/dsa/microchip/ksz8795.c | 1311 +++++++++++++++++++++++
drivers/net/dsa/microchip/ksz8795_reg.h | 1004 +++++++++++++++++
drivers/net/dsa/microchip/ksz8795_spi.c | 104 ++
drivers/net/dsa/microchip/ksz_common.c | 3 +-
drivers/net/dsa/microchip/ksz_common.h | 28 +
drivers/net/dsa/microchip/ksz_priv.h | 1 +
8 files changed, 2469 insertions(+), 1 deletion(-)
create mode 100644 drivers/net/dsa/microchip/ksz8795.c
create mode 100644 drivers/net/dsa/microchip/ksz8795_reg.h
create mode 100644 drivers/net/dsa/microchip/ksz8795_spi.c
diff --git a/drivers/net/dsa/microchip/Kconfig b/drivers/net/dsa/microchip/Kconfig
index fe0a13b79c4b..5e4f74286ea3 100644
--- a/drivers/net/dsa/microchip/Kconfig
+++ b/drivers/net/dsa/microchip/Kconfig
@@ -16,3 +16,20 @@ config NET_DSA_MICROCHIP_KSZ9477_SPI
select REGMAP_SPI
help
Select to enable support for registering switches configured through SPI.
+
+menuconfig NET_DSA_MICROCHIP_KSZ8795
+ tristate "Microchip KSZ8795 series switch support"
+ depends on NET_DSA
+ select NET_DSA_MICROCHIP_KSZ_COMMON
+ help
+ This driver adds support for Microchip KSZ8795 switch chips.
+
+config NET_DSA_MICROCHIP_KSZ8795_SPI
+ tristate "KSZ8795 series SPI connected switch driver"
+ depends on NET_DSA_MICROCHIP_KSZ8795 && SPI
+ select REGMAP_SPI
+ help
+ This driver accesses KSZ8795 chip through SPI.
+
+ It is required to use the KSZ8795 switch driver as the only access
+ is through SPI.
diff --git a/drivers/net/dsa/microchip/Makefile b/drivers/net/dsa/microchip/Makefile
index 68451b02f775..e3d799b95d7d 100644
--- a/drivers/net/dsa/microchip/Makefile
+++ b/drivers/net/dsa/microchip/Makefile
@@ -2,3 +2,5 @@
obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON) += ksz_common.o
obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ9477) += ksz9477.o
obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ9477_SPI) += ksz9477_spi.o
+obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ8795) += ksz8795.o
+obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ8795_SPI) += ksz8795_spi.o
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
new file mode 100644
index 000000000000..ae80b3c6dea2
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -0,0 +1,1311 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Microchip KSZ8795 switch driver
+ *
+ * Copyright (C) 2017 Microchip Technology Inc.
+ * Tristram Ha <Tristram.Ha@microchip.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_data/microchip-ksz.h>
+#include <linux/phy.h>
+#include <linux/etherdevice.h>
+#include <linux/if_bridge.h>
+#include <net/dsa.h>
+#include <net/switchdev.h>
+
+#include "ksz_priv.h"
+#include "ksz_common.h"
+#include "ksz8795_reg.h"
+
+static const struct {
+ char string[ETH_GSTRING_LEN];
+} mib_names[TOTAL_SWITCH_COUNTER_NUM] = {
+ { "rx_hi" },
+ { "rx_undersize" },
+ { "rx_fragments" },
+ { "rx_oversize" },
+ { "rx_jabbers" },
+ { "rx_symbol_err" },
+ { "rx_crc_err" },
+ { "rx_align_err" },
+ { "rx_mac_ctrl" },
+ { "rx_pause" },
+ { "rx_bcast" },
+ { "rx_mcast" },
+ { "rx_ucast" },
+ { "rx_64_or_less" },
+ { "rx_65_127" },
+ { "rx_128_255" },
+ { "rx_256_511" },
+ { "rx_512_1023" },
+ { "rx_1024_1522" },
+ { "rx_1523_2000" },
+ { "rx_2001" },
+ { "tx_hi" },
+ { "tx_late_col" },
+ { "tx_pause" },
+ { "tx_bcast" },
+ { "tx_mcast" },
+ { "tx_ucast" },
+ { "tx_deferred" },
+ { "tx_total_col" },
+ { "tx_exc_col" },
+ { "tx_single_col" },
+ { "tx_mult_col" },
+ { "rx_total" },
+ { "tx_total" },
+ { "rx_discards" },
+ { "tx_discards" },
+};
+
+static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set)
+{
+ regmap_update_bits(dev->regmap[0], addr, bits, set ? bits : 0);
+}
+
+static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits,
+ bool set)
+{
+ regmap_update_bits(dev->regmap[0], PORT_CTRL_ADDR(port, offset),
+ bits, set ? bits : 0);
+}
+
+static int ksz8795_reset_switch(struct ksz_device *dev)
+{
+ /* reset switch */
+ ksz_write8(dev, REG_POWER_MANAGEMENT_1,
+ SW_SOFTWARE_POWER_DOWN << SW_POWER_MANAGEMENT_MODE_S);
+ ksz_write8(dev, REG_POWER_MANAGEMENT_1, 0);
+
+ return 0;
+}
+
+static void ksz8795_set_prio_queue(struct ksz_device *dev, int port, int queue)
+{
+ u8 hi, lo;
+
+ /* Number of queues can only be 1, 2, or 4. */
+ switch (queue) {
+ case 4:
+ case 3:
+ queue = PORT_QUEUE_SPLIT_4;
+ break;
+ case 2:
+ queue = PORT_QUEUE_SPLIT_2;
+ break;
+ default:
+ queue = PORT_QUEUE_SPLIT_1;
+ }
+ ksz_pread8(dev, port, REG_PORT_CTRL_0, &lo);
+ ksz_pread8(dev, port, P_DROP_TAG_CTRL, &hi);
+ lo &= ~PORT_QUEUE_SPLIT_L;
+ if (queue & PORT_QUEUE_SPLIT_2)
+ lo |= PORT_QUEUE_SPLIT_L;
+ hi &= ~PORT_QUEUE_SPLIT_H;
+ if (queue & PORT_QUEUE_SPLIT_4)
+ hi |= PORT_QUEUE_SPLIT_H;
+ ksz_pwrite8(dev, port, REG_PORT_CTRL_0, lo);
+ ksz_pwrite8(dev, port, P_DROP_TAG_CTRL, hi);
+
+ /* Default is port based for egress rate limit. */
+ if (queue != PORT_QUEUE_SPLIT_1)
+ ksz_cfg(dev, REG_SW_CTRL_19, SW_OUT_RATE_LIMIT_QUEUE_BASED,
+ true);
+}
+
+static void ksz8795_r_mib_cnt(struct ksz_device *dev, int port, u16 addr,
+ u64 *cnt)
+{
+ u16 ctrl_addr;
+ u32 data;
+ u8 check;
+ int loop;
+
+ ctrl_addr = addr + SWITCH_COUNTER_NUM * port;
+ ctrl_addr |= IND_ACC_TABLE(TABLE_MIB | TABLE_READ);
+
+ mutex_lock(&dev->alu_mutex);
+ ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr);
+
+ /* It is almost guaranteed to always read the valid bit because of
+ * slow SPI speed.
+ */
+ for (loop = 2; loop > 0; loop--) {
+ ksz_read8(dev, REG_IND_MIB_CHECK, &check);
+
+ if (check & MIB_COUNTER_VALID) {
+ ksz_read32(dev, REG_IND_DATA_LO, &data);
+ if (check & MIB_COUNTER_OVERFLOW)
+ *cnt += MIB_COUNTER_VALUE + 1;
+ *cnt += data & MIB_COUNTER_VALUE;
+ break;
+ }
+ }
+ mutex_unlock(&dev->alu_mutex);
+}
+
+static void ksz8795_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
+ u64 *dropped, u64 *cnt)
+{
+ u16 ctrl_addr;
+ u32 data;
+ u8 check;
+ int loop;
+
+ addr -= SWITCH_COUNTER_NUM;
+ ctrl_addr = (KS_MIB_TOTAL_RX_1 - KS_MIB_TOTAL_RX_0) * port;
+ ctrl_addr += addr + KS_MIB_TOTAL_RX_0;
+ ctrl_addr |= IND_ACC_TABLE(TABLE_MIB | TABLE_READ);
+
+ mutex_lock(&dev->alu_mutex);
+ ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr);
+
+ /* It is almost guaranteed to always read the valid bit because of
+ * slow SPI speed.
+ */
+ for (loop = 2; loop > 0; loop--) {
+ ksz_read8(dev, REG_IND_MIB_CHECK, &check);
+
+ if (check & MIB_COUNTER_VALID) {
+ ksz_read32(dev, REG_IND_DATA_LO, &data);
+ if (addr < 2) {
+ u64 total;
+
+ total = check & MIB_TOTAL_BYTES_H;
+ total <<= 32;
+ *cnt += total;
+ *cnt += data;
+ if (check & MIB_COUNTER_OVERFLOW) {
+ total = MIB_TOTAL_BYTES_H + 1;
+ total <<= 32;
+ *cnt += total;
+ }
+ } else {
+ if (check & MIB_COUNTER_OVERFLOW)
+ *cnt += MIB_PACKET_DROPPED + 1;
+ *cnt += data & MIB_PACKET_DROPPED;
+ }
+ break;
+ }
+ }
+ mutex_unlock(&dev->alu_mutex);
+}
+
+static void ksz8795_freeze_mib(struct ksz_device *dev, int port, bool freeze)
+{
+ /* enable the port for flush/freeze function */
+ if (freeze)
+ ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), true);
+ ksz_cfg(dev, REG_SW_CTRL_6, SW_MIB_COUNTER_FREEZE, freeze);
+
+ /* disable the port after freeze is done */
+ if (!freeze)
+ ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), false);
+}
+
+static void ksz8795_port_init_cnt(struct ksz_device *dev, int port)
+{
+ struct ksz_port_mib *mib = &dev->ports[port].mib;
+
+ /* flush all enabled port MIB counters */
+ ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), true);
+ ksz_cfg(dev, REG_SW_CTRL_6, SW_MIB_COUNTER_FLUSH, true);
+ ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), false);
+
+ mib->cnt_ptr = 0;
+
+ /* Some ports may not have MIB counters before SWITCH_COUNTER_NUM. */
+ while (mib->cnt_ptr < dev->reg_mib_cnt) {
+ dev->dev_ops->r_mib_cnt(dev, port, mib->cnt_ptr,
+ &mib->counters[mib->cnt_ptr]);
+ ++mib->cnt_ptr;
+ }
+
+ /* Some ports may not have MIB counters after SWITCH_COUNTER_NUM. */
+ while (mib->cnt_ptr < dev->mib_cnt) {
+ dev->dev_ops->r_mib_pkt(dev, port, mib->cnt_ptr,
+ NULL, &mib->counters[mib->cnt_ptr]);
+ ++mib->cnt_ptr;
+ }
+ mib->cnt_ptr = 0;
+ memset(mib->counters, 0, dev->mib_cnt * sizeof(u64));
+}
+
+static void ksz8795_r_table(struct ksz_device *dev, int table, u16 addr,
+ u64 *data)
+{
+ u16 ctrl_addr;
+
+ ctrl_addr = IND_ACC_TABLE(table | TABLE_READ) | addr;
+
+ mutex_lock(&dev->alu_mutex);
+ ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr);
+ ksz_read64(dev, REG_IND_DATA_HI, data);
+ mutex_unlock(&dev->alu_mutex);
+}
+
+static void ksz8795_w_table(struct ksz_device *dev, int table, u16 addr,
+ u64 data)
+{
+ u16 ctrl_addr;
+
+ ctrl_addr = IND_ACC_TABLE(table) | addr;
+
+ mutex_lock(&dev->alu_mutex);
+ ksz_write64(dev, REG_IND_DATA_HI, data);
+ ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr);
+ mutex_unlock(&dev->alu_mutex);
+}
+
+static int ksz8795_valid_dyn_entry(struct ksz_device *dev, u8 *data)
+{
+ int timeout = 100;
+
+ do {
+ ksz_read8(dev, REG_IND_DATA_CHECK, data);
+ timeout--;
+ } while ((*data & DYNAMIC_MAC_TABLE_NOT_READY) && timeout);
+
+ /* Entry is not ready for accessing. */
+ if (*data & DYNAMIC_MAC_TABLE_NOT_READY) {
+ return -EAGAIN;
+ /* Entry is ready for accessing. */
+ } else {
+ ksz_read8(dev, REG_IND_DATA_8, data);
+
+ /* There is no valid entry in the table. */
+ if (*data & DYNAMIC_MAC_TABLE_MAC_EMPTY)
+ return -ENXIO;
+ }
+ return 0;
+}
+
+static int ksz8795_r_dyn_mac_table(struct ksz_device *dev, u16 addr,
+ u8 *mac_addr, u8 *fid, u8 *src_port,
+ u8 *timestamp, u16 *entries)
+{
+ u32 data_hi, data_lo;
+ u16 ctrl_addr;
+ u8 data;
+ int rc;
+
+ ctrl_addr = IND_ACC_TABLE(TABLE_DYNAMIC_MAC | TABLE_READ) | addr;
+
+ mutex_lock(&dev->alu_mutex);
+ ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr);
+
+ rc = ksz8795_valid_dyn_entry(dev, &data);
+ if (rc == -EAGAIN) {
+ if (addr == 0)
+ *entries = 0;
+ } else if (rc == -ENXIO) {
+ *entries = 0;
+ /* At least one valid entry in the table. */
+ } else {
+ u64 buf = 0;
+ int cnt;
+
+ ksz_read64(dev, REG_IND_DATA_HI, &buf);
+ data_hi = (u32)(buf >> 32);
+ data_lo = (u32)buf;
+
+ /* Check out how many valid entry in the table. */
+ cnt = data & DYNAMIC_MAC_TABLE_ENTRIES_H;
+ cnt <<= DYNAMIC_MAC_ENTRIES_H_S;
+ cnt |= (data_hi & DYNAMIC_MAC_TABLE_ENTRIES) >>
+ DYNAMIC_MAC_ENTRIES_S;
+ *entries = cnt + 1;
+
+ *fid = (data_hi & DYNAMIC_MAC_TABLE_FID) >>
+ DYNAMIC_MAC_FID_S;
+ *src_port = (data_hi & DYNAMIC_MAC_TABLE_SRC_PORT) >>
+ DYNAMIC_MAC_SRC_PORT_S;
+ *timestamp = (data_hi & DYNAMIC_MAC_TABLE_TIMESTAMP) >>
+ DYNAMIC_MAC_TIMESTAMP_S;
+
+ mac_addr[5] = (u8)data_lo;
+ mac_addr[4] = (u8)(data_lo >> 8);
+ mac_addr[3] = (u8)(data_lo >> 16);
+ mac_addr[2] = (u8)(data_lo >> 24);
+
+ mac_addr[1] = (u8)data_hi;
+ mac_addr[0] = (u8)(data_hi >> 8);
+ rc = 0;
+ }
+ mutex_unlock(&dev->alu_mutex);
+
+ return rc;
+}
+
+static int ksz8795_r_sta_mac_table(struct ksz_device *dev, u16 addr,
+ struct alu_struct *alu)
+{
+ u32 data_hi, data_lo;
+ u64 data;
+
+ ksz8795_r_table(dev, TABLE_STATIC_MAC, addr, &data);
+ data_hi = data >> 32;
+ data_lo = (u32)data;
+ if (data_hi & (STATIC_MAC_TABLE_VALID | STATIC_MAC_TABLE_OVERRIDE)) {
+ alu->mac[5] = (u8)data_lo;
+ alu->mac[4] = (u8)(data_lo >> 8);
+ alu->mac[3] = (u8)(data_lo >> 16);
+ alu->mac[2] = (u8)(data_lo >> 24);
+ alu->mac[1] = (u8)data_hi;
+ alu->mac[0] = (u8)(data_hi >> 8);
+ alu->port_forward = (data_hi & STATIC_MAC_TABLE_FWD_PORTS) >>
+ STATIC_MAC_FWD_PORTS_S;
+ alu->is_override =
+ (data_hi & STATIC_MAC_TABLE_OVERRIDE) ? 1 : 0;
+ data_hi >>= 1;
+ alu->is_use_fid = (data_hi & STATIC_MAC_TABLE_USE_FID) ? 1 : 0;
+ alu->fid = (data_hi & STATIC_MAC_TABLE_FID) >>
+ STATIC_MAC_FID_S;
+ return 0;
+ }
+ return -ENXIO;
+}
+
+static void ksz8795_w_sta_mac_table(struct ksz_device *dev, u16 addr,
+ struct alu_struct *alu)
+{
+ u32 data_hi, data_lo;
+ u64 data;
+
+ data_lo = ((u32)alu->mac[2] << 24) |
+ ((u32)alu->mac[3] << 16) |
+ ((u32)alu->mac[4] << 8) | alu->mac[5];
+ data_hi = ((u32)alu->mac[0] << 8) | alu->mac[1];
+ data_hi |= (u32)alu->port_forward << STATIC_MAC_FWD_PORTS_S;
+
+ if (alu->is_override)
+ data_hi |= STATIC_MAC_TABLE_OVERRIDE;
+ if (alu->is_use_fid) {
+ data_hi |= STATIC_MAC_TABLE_USE_FID;
+ data_hi |= (u32)alu->fid << STATIC_MAC_FID_S;
+ }
+ if (alu->is_static)
+ data_hi |= STATIC_MAC_TABLE_VALID;
+ else
+ data_hi &= ~STATIC_MAC_TABLE_OVERRIDE;
+
+ data = (u64)data_hi << 32 | data_lo;
+ ksz8795_w_table(dev, TABLE_STATIC_MAC, addr, data);
+}
+
+static void ksz8795_from_vlan(u16 vlan, u8 *fid, u8 *member, u8 *valid)
+{
+ *fid = vlan & VLAN_TABLE_FID;
+ *member = (vlan & VLAN_TABLE_MEMBERSHIP) >> VLAN_TABLE_MEMBERSHIP_S;
+ *valid = !!(vlan & VLAN_TABLE_VALID);
+}
+
+static void ksz8795_to_vlan(u8 fid, u8 member, u8 valid, u16 *vlan)
+{
+ *vlan = fid;
+ *vlan |= (u16)member << VLAN_TABLE_MEMBERSHIP_S;
+ if (valid)
+ *vlan |= VLAN_TABLE_VALID;
+}
+
+static void ksz8795_r_vlan_entries(struct ksz_device *dev, u16 addr)
+{
+ u64 data;
+ int i;
+
+ ksz8795_r_table(dev, TABLE_VLAN, addr, &data);
+ addr *= 4;
+ for (i = 0; i < 4; i++) {
+ dev->vlan_cache[addr + i].table[0] = (u16)data;
+ data >>= VLAN_TABLE_S;
+ }
+}
+
+static void ksz8795_r_vlan_table(struct ksz_device *dev, u16 vid, u16 *vlan)
+{
+ int index;
+ u16 *data;
+ u16 addr;
+ u64 buf;
+
+ data = (u16 *)&buf;
+ addr = vid / 4;
+ index = vid & 3;
+ ksz8795_r_table(dev, TABLE_VLAN, addr, &buf);
+ *vlan = data[index];
+}
+
+static void ksz8795_w_vlan_table(struct ksz_device *dev, u16 vid, u16 vlan)
+{
+ int index;
+ u16 *data;
+ u16 addr;
+ u64 buf;
+
+ data = (u16 *)&buf;
+ addr = vid / 4;
+ index = vid & 3;
+ ksz8795_r_table(dev, TABLE_VLAN, addr, &buf);
+ data[index] = vlan;
+ dev->vlan_cache[vid].table[0] = vlan;
+ ksz8795_w_table(dev, TABLE_VLAN, addr, buf);
+}
+
+static void ksz8795_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val)
+{
+ u8 restart, speed, ctrl, link;
+ int processed = true;
+ u16 data = 0;
+ u8 p = phy;
+
+ switch (reg) {
+ case PHY_REG_CTRL:
+ ksz_pread8(dev, p, P_NEG_RESTART_CTRL, &restart);
+ ksz_pread8(dev, p, P_SPEED_STATUS, &speed);
+ ksz_pread8(dev, p, P_FORCE_CTRL, &ctrl);
+ if (restart & PORT_PHY_LOOPBACK)
+ data |= PHY_LOOPBACK;
+ if (ctrl & PORT_FORCE_100_MBIT)
+ data |= PHY_SPEED_100MBIT;
+ if (!(ctrl & PORT_AUTO_NEG_DISABLE))
+ data |= PHY_AUTO_NEG_ENABLE;
+ if (restart & PORT_POWER_DOWN)
+ data |= PHY_POWER_DOWN;
+ if (restart & PORT_AUTO_NEG_RESTART)
+ data |= PHY_AUTO_NEG_RESTART;
+ if (ctrl & PORT_FORCE_FULL_DUPLEX)
+ data |= PHY_FULL_DUPLEX;
+ if (speed & PORT_HP_MDIX)
+ data |= PHY_HP_MDIX;
+ if (restart & PORT_FORCE_MDIX)
+ data |= PHY_FORCE_MDIX;
+ if (restart & PORT_AUTO_MDIX_DISABLE)
+ data |= PHY_AUTO_MDIX_DISABLE;
+ if (restart & PORT_TX_DISABLE)
+ data |= PHY_TRANSMIT_DISABLE;
+ if (restart & PORT_LED_OFF)
+ data |= PHY_LED_DISABLE;
+ break;
+ case PHY_REG_STATUS:
+ ksz_pread8(dev, p, P_LINK_STATUS, &link);
+ data = PHY_100BTX_FD_CAPABLE |
+ PHY_100BTX_CAPABLE |
+ PHY_10BT_FD_CAPABLE |
+ PHY_10BT_CAPABLE |
+ PHY_AUTO_NEG_CAPABLE;
+ if (link & PORT_AUTO_NEG_COMPLETE)
+ data |= PHY_AUTO_NEG_ACKNOWLEDGE;
+ if (link & PORT_STAT_LINK_GOOD)
+ data |= PHY_LINK_STATUS;
+ break;
+ case PHY_REG_ID_1:
+ data = KSZ8795_ID_HI;
+ break;
+ case PHY_REG_ID_2:
+ data = KSZ8795_ID_LO;
+ break;
+ case PHY_REG_AUTO_NEGOTIATION:
+ ksz_pread8(dev, p, P_LOCAL_CTRL, &ctrl);
+ data = PHY_AUTO_NEG_802_3;
+ if (ctrl & PORT_AUTO_NEG_SYM_PAUSE)
+ data |= PHY_AUTO_NEG_SYM_PAUSE;
+ if (ctrl & PORT_AUTO_NEG_100BTX_FD)
+ data |= PHY_AUTO_NEG_100BTX_FD;
+ if (ctrl & PORT_AUTO_NEG_100BTX)
+ data |= PHY_AUTO_NEG_100BTX;
+ if (ctrl & PORT_AUTO_NEG_10BT_FD)
+ data |= PHY_AUTO_NEG_10BT_FD;
+ if (ctrl & PORT_AUTO_NEG_10BT)
+ data |= PHY_AUTO_NEG_10BT;
+ break;
+ case PHY_REG_REMOTE_CAPABILITY:
+ ksz_pread8(dev, p, P_REMOTE_STATUS, &link);
+ data = PHY_AUTO_NEG_802_3;
+ if (link & PORT_REMOTE_SYM_PAUSE)
+ data |= PHY_AUTO_NEG_SYM_PAUSE;
+ if (link & PORT_REMOTE_100BTX_FD)
+ data |= PHY_AUTO_NEG_100BTX_FD;
+ if (link & PORT_REMOTE_100BTX)
+ data |= PHY_AUTO_NEG_100BTX;
+ if (link & PORT_REMOTE_10BT_FD)
+ data |= PHY_AUTO_NEG_10BT_FD;
+ if (link & PORT_REMOTE_10BT)
+ data |= PHY_AUTO_NEG_10BT;
+ if (data & ~PHY_AUTO_NEG_802_3)
+ data |= PHY_REMOTE_ACKNOWLEDGE_NOT;
+ break;
+ default:
+ processed = false;
+ break;
+ }
+ if (processed)
+ *val = data;
+}
+
+static void ksz8795_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val)
+{
+ u8 p = phy;
+ u8 restart, speed, ctrl, data;
+
+ switch (reg) {
+ case PHY_REG_CTRL:
+
+ /* Do not support PHY reset function. */
+ if (val & PHY_RESET)
+ break;
+ ksz_pread8(dev, p, P_SPEED_STATUS, &speed);
+ data = speed;
+ if (val & PHY_HP_MDIX)
+ data |= PORT_HP_MDIX;
+ else
+ data &= ~PORT_HP_MDIX;
+ if (data != speed)
+ ksz_pwrite8(dev, p, P_SPEED_STATUS, data);
+ ksz_pread8(dev, p, P_FORCE_CTRL, &ctrl);
+ data = ctrl;
+ if (!(val & PHY_AUTO_NEG_ENABLE))
+ data |= PORT_AUTO_NEG_DISABLE;
+ else
+ data &= ~PORT_AUTO_NEG_DISABLE;
+
+ /* Fiber port does not support auto-negotiation. */
+ if (dev->ports[p].fiber)
+ data |= PORT_AUTO_NEG_DISABLE;
+ if (val & PHY_SPEED_100MBIT)
+ data |= PORT_FORCE_100_MBIT;
+ else
+ data &= ~PORT_FORCE_100_MBIT;
+ if (val & PHY_FULL_DUPLEX)
+ data |= PORT_FORCE_FULL_DUPLEX;
+ else
+ data &= ~PORT_FORCE_FULL_DUPLEX;
+ if (data != ctrl)
+ ksz_pwrite8(dev, p, P_FORCE_CTRL, data);
+ ksz_pread8(dev, p, P_NEG_RESTART_CTRL, &restart);
+ data = restart;
+ if (val & PHY_LED_DISABLE)
+ data |= PORT_LED_OFF;
+ else
+ data &= ~PORT_LED_OFF;
+ if (val & PHY_TRANSMIT_DISABLE)
+ data |= PORT_TX_DISABLE;
+ else
+ data &= ~PORT_TX_DISABLE;
+ if (val & PHY_AUTO_NEG_RESTART)
+ data |= PORT_AUTO_NEG_RESTART;
+ else
+ data &= ~(PORT_AUTO_NEG_RESTART);
+ if (val & PHY_POWER_DOWN)
+ data |= PORT_POWER_DOWN;
+ else
+ data &= ~PORT_POWER_DOWN;
+ if (val & PHY_AUTO_MDIX_DISABLE)
+ data |= PORT_AUTO_MDIX_DISABLE;
+ else
+ data &= ~PORT_AUTO_MDIX_DISABLE;
+ if (val & PHY_FORCE_MDIX)
+ data |= PORT_FORCE_MDIX;
+ else
+ data &= ~PORT_FORCE_MDIX;
+ if (val & PHY_LOOPBACK)
+ data |= PORT_PHY_LOOPBACK;
+ else
+ data &= ~PORT_PHY_LOOPBACK;
+ if (data != restart)
+ ksz_pwrite8(dev, p, P_NEG_RESTART_CTRL, data);
+ break;
+ case PHY_REG_AUTO_NEGOTIATION:
+ ksz_pread8(dev, p, P_LOCAL_CTRL, &ctrl);
+ data = ctrl;
+ data &= ~(PORT_AUTO_NEG_SYM_PAUSE |
+ PORT_AUTO_NEG_100BTX_FD |
+ PORT_AUTO_NEG_100BTX |
+ PORT_AUTO_NEG_10BT_FD |
+ PORT_AUTO_NEG_10BT);
+ if (val & PHY_AUTO_NEG_SYM_PAUSE)
+ data |= PORT_AUTO_NEG_SYM_PAUSE;
+ if (val & PHY_AUTO_NEG_100BTX_FD)
+ data |= PORT_AUTO_NEG_100BTX_FD;
+ if (val & PHY_AUTO_NEG_100BTX)
+ data |= PORT_AUTO_NEG_100BTX;
+ if (val & PHY_AUTO_NEG_10BT_FD)
+ data |= PORT_AUTO_NEG_10BT_FD;
+ if (val & PHY_AUTO_NEG_10BT)
+ data |= PORT_AUTO_NEG_10BT;
+ if (data != ctrl)
+ ksz_pwrite8(dev, p, P_LOCAL_CTRL, data);
+ break;
+ default:
+ break;
+ }
+}
+
+static enum dsa_tag_protocol ksz8795_get_tag_protocol(struct dsa_switch *ds,
+ int port)
+{
+ return DSA_TAG_PROTO_KSZ8795;
+}
+
+static void ksz8795_get_strings(struct dsa_switch *ds, int port,
+ u32 stringset, uint8_t *buf)
+{
+ int i;
+
+ for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) {
+ memcpy(buf + i * ETH_GSTRING_LEN, mib_names[i].string,
+ ETH_GSTRING_LEN);
+ }
+}
+
+static void ksz8795_cfg_port_member(struct ksz_device *dev, int port,
+ u8 member)
+{
+ u8 data;
+
+ ksz_pread8(dev, port, P_MIRROR_CTRL, &data);
+ data &= ~PORT_VLAN_MEMBERSHIP;
+ data |= (member & dev->port_mask);
+ ksz_pwrite8(dev, port, P_MIRROR_CTRL, data);
+ dev->ports[port].member = member;
+}
+
+static void ksz8795_port_stp_state_set(struct dsa_switch *ds, int port,
+ u8 state)
+{
+ struct ksz_device *dev = ds->priv;
+ int forward = dev->member;
+ struct ksz_port *p;
+ int member = -1;
+ u8 data;
+
+ p = &dev->ports[port];
+
+ ksz_pread8(dev, port, P_STP_CTRL, &data);
+ data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE | PORT_LEARN_DISABLE);
+
+ switch (state) {
+ case BR_STATE_DISABLED:
+ data |= PORT_LEARN_DISABLE;
+ if (port < SWITCH_PORT_NUM)
+ member = 0;
+ break;
+ case BR_STATE_LISTENING:
+ data |= (PORT_RX_ENABLE | PORT_LEARN_DISABLE);
+ if (port < SWITCH_PORT_NUM &&
+ p->stp_state == BR_STATE_DISABLED)
+ member = dev->host_mask | p->vid_member;
+ break;
+ case BR_STATE_LEARNING:
+ data |= PORT_RX_ENABLE;
+ break;
+ case BR_STATE_FORWARDING:
+ data |= (PORT_TX_ENABLE | PORT_RX_ENABLE);
+
+ /* This function is also used internally. */
+ if (port == dev->cpu_port)
+ break;
+
+ /* Port is a member of a bridge. */
+ if (dev->br_member & BIT(port)) {
+ dev->member |= BIT(port);
+ member = dev->member;
+ } else {
+ member = dev->host_mask | p->vid_member;
+ }
+ break;
+ case BR_STATE_BLOCKING:
+ data |= PORT_LEARN_DISABLE;
+ if (port < SWITCH_PORT_NUM &&
+ p->stp_state == BR_STATE_DISABLED)
+ member = dev->host_mask | p->vid_member;
+ break;
+ default:
+ dev_err(ds->dev, "invalid STP state: %d\n", state);
+ return;
+ }
+
+ ksz_pwrite8(dev, port, P_STP_CTRL, data);
+ p->stp_state = state;
+ if (data & PORT_RX_ENABLE)
+ dev->rx_ports |= BIT(port);
+ else
+ dev->rx_ports &= ~BIT(port);
+ if (data & PORT_TX_ENABLE)
+ dev->tx_ports |= BIT(port);
+ else
+ dev->tx_ports &= ~BIT(port);
+
+ /* Port membership may share register with STP state. */
+ if (member >= 0 && member != p->member)
+ ksz8795_cfg_port_member(dev, port, (u8)member);
+
+ /* Check if forwarding needs to be updated. */
+ if (state != BR_STATE_FORWARDING) {
+ if (dev->br_member & BIT(port))
+ dev->member &= ~BIT(port);
+ }
+
+ /* When topology has changed the function ksz_update_port_member
+ * should be called to modify port forwarding behavior.
+ */
+ if (forward != dev->member)
+ ksz_update_port_member(dev, port);
+}
+
+static void ksz8795_flush_dyn_mac_table(struct ksz_device *dev, int port)
+{
+ u8 learn[TOTAL_PORT_NUM];
+ int first, index, cnt;
+ struct ksz_port *p;
+
+ if ((uint)port < TOTAL_PORT_NUM) {
+ first = port;
+ cnt = port + 1;
+ } else {
+ /* Flush all ports. */
+ first = 0;
+ cnt = dev->mib_port_cnt;
+ }
+ for (index = first; index < cnt; index++) {
+ p = &dev->ports[index];
+ if (!p->on)
+ continue;
+ ksz_pread8(dev, index, P_STP_CTRL, &learn[index]);
+ if (!(learn[index] & PORT_LEARN_DISABLE))
+ ksz_pwrite8(dev, index, P_STP_CTRL,
+ learn[index] | PORT_LEARN_DISABLE);
+ }
+ ksz_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_DYN_MAC_TABLE, true);
+ for (index = first; index < cnt; index++) {
+ p = &dev->ports[index];
+ if (!p->on)
+ continue;
+ if (!(learn[index] & PORT_LEARN_DISABLE))
+ ksz_pwrite8(dev, index, P_STP_CTRL, learn[index]);
+ }
+}
+
+static int ksz8795_port_vlan_filtering(struct dsa_switch *ds, int port,
+ bool flag)
+{
+ struct ksz_device *dev = ds->priv;
+
+ ksz_cfg(dev, S_MIRROR_CTRL, SW_VLAN_ENABLE, flag);
+
+ return 0;
+}
+
+static void ksz8795_port_vlan_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan)
+{
+ bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
+ struct ksz_device *dev = ds->priv;
+ u16 data, vid, new_pvid = 0;
+ u8 fid, member, valid;
+
+ ksz_port_cfg(dev, port, P_TAG_CTRL, PORT_REMOVE_TAG, untagged);
+
+ for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
+ ksz8795_r_vlan_table(dev, vid, &data);
+ ksz8795_from_vlan(data, &fid, &member, &valid);
+
+ /* First time to setup the VLAN entry. */
+ if (!valid) {
+ /* Need to find a way to map VID to FID. */
+ fid = 1;
+ valid = 1;
+ }
+ member |= BIT(port);
+
+ ksz8795_to_vlan(fid, member, valid, &data);
+ ksz8795_w_vlan_table(dev, vid, data);
+
+ /* change PVID */
+ if (vlan->flags & BRIDGE_VLAN_INFO_PVID)
+ new_pvid = vid;
+ }
+
+ if (new_pvid) {
+ ksz_pread16(dev, port, REG_PORT_CTRL_VID, &vid);
+ vid &= 0xfff;
+ vid |= new_pvid;
+ ksz_pwrite16(dev, port, REG_PORT_CTRL_VID, vid);
+ }
+}
+
+static int ksz8795_port_vlan_del(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan)
+{
+ bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
+ struct ksz_device *dev = ds->priv;
+ u16 data, vid, pvid, new_pvid = 0;
+ u8 fid, member, valid;
+
+ ksz_pread16(dev, port, REG_PORT_CTRL_VID, &pvid);
+ pvid = pvid & 0xFFF;
+
+ ksz_port_cfg(dev, port, P_TAG_CTRL, PORT_REMOVE_TAG, untagged);
+
+ for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
+ ksz8795_r_vlan_table(dev, vid, &data);
+ ksz8795_from_vlan(data, &fid, &member, &valid);
+
+ member &= ~BIT(port);
+
+ /* Invalidate the entry if no more member. */
+ if (!member) {
+ fid = 0;
+ valid = 0;
+ }
+
+ if (pvid == vid)
+ new_pvid = 1;
+
+ ksz8795_to_vlan(fid, member, valid, &data);
+ ksz8795_w_vlan_table(dev, vid, data);
+ }
+
+ if (new_pvid != pvid)
+ ksz_pwrite16(dev, port, REG_PORT_CTRL_VID, pvid);
+
+ return 0;
+}
+
+static int ksz8795_port_mirror_add(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror,
+ bool ingress)
+{
+ struct ksz_device *dev = ds->priv;
+
+ if (ingress) {
+ ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, true);
+ dev->mirror_rx |= BIT(port);
+ } else {
+ ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, true);
+ dev->mirror_tx |= BIT(port);
+ }
+
+ ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_SNIFFER, false);
+
+ /* configure mirror port */
+ if (dev->mirror_rx || dev->mirror_tx)
+ ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
+ PORT_MIRROR_SNIFFER, true);
+
+ return 0;
+}
+
+static void ksz8795_port_mirror_del(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror)
+{
+ struct ksz_device *dev = ds->priv;
+ u8 data;
+
+ if (mirror->ingress) {
+ ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, false);
+ dev->mirror_rx &= ~BIT(port);
+ } else {
+ ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, false);
+ dev->mirror_tx &= ~BIT(port);
+ }
+
+ ksz_pread8(dev, port, P_MIRROR_CTRL, &data);
+
+ if (!dev->mirror_rx && !dev->mirror_tx)
+ ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
+ PORT_MIRROR_SNIFFER, false);
+}
+
+static void ksz8795_port_setup(struct ksz_device *dev, int port, bool cpu_port)
+{
+ struct ksz_port *p = &dev->ports[port];
+ u8 data8, member;
+
+ /* enable broadcast storm limit */
+ ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true);
+
+ ksz8795_set_prio_queue(dev, port, 4);
+
+ /* disable DiffServ priority */
+ ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_ENABLE, false);
+
+ /* replace priority */
+ ksz_port_cfg(dev, port, P_802_1P_CTRL, PORT_802_1P_REMAPPING, false);
+
+ /* enable 802.1p priority */
+ ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_ENABLE, true);
+
+ if (cpu_port) {
+ /* Configure MII interface for proper network communication. */
+ ksz_read8(dev, REG_PORT_5_CTRL_6, &data8);
+ data8 &= ~PORT_INTERFACE_TYPE;
+ data8 &= ~PORT_GMII_1GPS_MODE;
+ switch (dev->interface) {
+ case PHY_INTERFACE_MODE_MII:
+ p->phydev.speed = SPEED_100;
+ break;
+ case PHY_INTERFACE_MODE_RMII:
+ data8 |= PORT_INTERFACE_RMII;
+ p->phydev.speed = SPEED_100;
+ break;
+ case PHY_INTERFACE_MODE_GMII:
+ data8 |= PORT_GMII_1GPS_MODE;
+ data8 |= PORT_INTERFACE_GMII;
+ p->phydev.speed = SPEED_1000;
+ break;
+ default:
+ data8 &= ~PORT_RGMII_ID_IN_ENABLE;
+ data8 &= ~PORT_RGMII_ID_OUT_ENABLE;
+ if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+ dev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
+ data8 |= PORT_RGMII_ID_IN_ENABLE;
+ if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+ dev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
+ data8 |= PORT_RGMII_ID_OUT_ENABLE;
+ data8 |= PORT_GMII_1GPS_MODE;
+ data8 |= PORT_INTERFACE_RGMII;
+ p->phydev.speed = SPEED_1000;
+ break;
+ }
+ ksz_write8(dev, REG_PORT_5_CTRL_6, data8);
+ p->phydev.duplex = 1;
+
+ member = dev->port_mask;
+ dev->on_ports = dev->host_mask;
+ dev->live_ports = dev->host_mask;
+ } else {
+ member = dev->host_mask | p->vid_member;
+ dev->on_ports |= BIT(port);
+
+ /* Link was detected before port is enabled. */
+ if (p->phydev.link)
+ dev->live_ports |= BIT(port);
+ }
+ ksz8795_cfg_port_member(dev, port, member);
+}
+
+static void ksz8795_config_cpu_port(struct dsa_switch *ds)
+{
+ struct ksz_device *dev = ds->priv;
+ struct ksz_port *p;
+ u8 remote;
+ int i;
+
+ ds->num_ports = dev->port_cnt + 1;
+
+ /* Switch marks the maximum frame with extra byte as oversize. */
+ ksz_cfg(dev, REG_SW_CTRL_2, SW_LEGAL_PACKET_DISABLE, true);
+ ksz_cfg(dev, S_TAIL_TAG_CTRL, SW_TAIL_TAG_ENABLE, true);
+
+ p = &dev->ports[dev->cpu_port];
+ p->vid_member = dev->port_mask;
+ p->on = 1;
+
+ ksz8795_port_setup(dev, dev->cpu_port, true);
+ dev->member = dev->host_mask;
+
+ for (i = 0; i < SWITCH_PORT_NUM; i++) {
+ p = &dev->ports[i];
+
+ /* Initialize to non-zero so that ksz_cfg_port_member() will
+ * be called.
+ */
+ p->vid_member = BIT(i);
+ p->member = dev->port_mask;
+ ksz8795_port_stp_state_set(ds, i, BR_STATE_DISABLED);
+
+ /* Last port may be disabled. */
+ if (i == dev->port_cnt)
+ break;
+ p->on = 1;
+ p->phy = 1;
+ }
+ for (i = 0; i < dev->phy_port_cnt; i++) {
+ p = &dev->ports[i];
+ if (!p->on)
+ continue;
+ ksz_pread8(dev, i, P_REMOTE_STATUS, &remote);
+ if (remote & PORT_FIBER_MODE)
+ p->fiber = 1;
+ if (p->fiber)
+ ksz_port_cfg(dev, i, P_STP_CTRL, PORT_FORCE_FLOW_CTRL,
+ true);
+ else
+ ksz_port_cfg(dev, i, P_STP_CTRL, PORT_FORCE_FLOW_CTRL,
+ false);
+ }
+}
+
+static int ksz8795_setup(struct dsa_switch *ds)
+{
+ struct ksz_device *dev = ds->priv;
+ struct alu_struct alu;
+ int i, ret = 0;
+
+ dev->vlan_cache = devm_kcalloc(dev->dev, sizeof(struct vlan_table),
+ dev->num_vlans, GFP_KERNEL);
+ if (!dev->vlan_cache)
+ return -ENOMEM;
+
+ ret = ksz8795_reset_switch(dev);
+ if (ret) {
+ dev_err(ds->dev, "failed to reset switch\n");
+ return ret;
+ }
+
+ ksz_cfg(dev, S_REPLACE_VID_CTRL, SW_FLOW_CTRL, true);
+
+ /* Enable automatic fast aging when link changed detected. */
+ ksz_cfg(dev, S_LINK_AGING_CTRL, SW_LINK_AUTO_AGING, true);
+
+ /* Enable aggressive back off algorithm in half duplex mode. */
+ regmap_update_bits(dev->regmap[0], REG_SW_CTRL_1,
+ SW_AGGR_BACKOFF, SW_AGGR_BACKOFF);
+
+ /*
+ * Make sure unicast VLAN boundary is set as default and
+ * enable no excessive collision drop.
+ */
+ regmap_update_bits(dev->regmap[0], REG_SW_CTRL_2,
+ UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP,
+ UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP);
+
+ ksz8795_config_cpu_port(ds);
+
+ ksz_cfg(dev, REG_SW_CTRL_2, MULTICAST_STORM_DISABLE, true);
+
+ ksz_cfg(dev, S_REPLACE_VID_CTRL, SW_REPLACE_VID, false);
+
+ ksz_cfg(dev, S_MIRROR_CTRL, SW_MIRROR_RX_TX, false);
+
+ /* set broadcast storm protection 10% rate */
+ regmap_update_bits(dev->regmap[1], S_REPLACE_VID_CTRL,
+ BROADCAST_STORM_RATE,
+ (BROADCAST_STORM_VALUE *
+ BROADCAST_STORM_PROT_RATE) / 100);
+
+ for (i = 0; i < VLAN_TABLE_ENTRIES; i++)
+ ksz8795_r_vlan_entries(dev, i);
+
+ /* Setup STP address for STP operation. */
+ memset(&alu, 0, sizeof(alu));
+ ether_addr_copy(alu.mac, eth_stp_addr);
+ alu.is_static = true;
+ alu.is_override = true;
+ alu.port_forward = dev->host_mask;
+
+ ksz8795_w_sta_mac_table(dev, 0, &alu);
+
+ ksz_init_mib_timer(dev);
+
+ return 0;
+}
+
+static const struct dsa_switch_ops ksz8795_switch_ops = {
+ .get_tag_protocol = ksz8795_get_tag_protocol,
+ .setup = ksz8795_setup,
+ .phy_read = ksz_phy_read16,
+ .phy_write = ksz_phy_write16,
+ .adjust_link = ksz_adjust_link,
+ .port_enable = ksz_enable_port,
+ .port_disable = ksz_disable_port,
+ .get_strings = ksz8795_get_strings,
+ .get_ethtool_stats = ksz_get_ethtool_stats,
+ .get_sset_count = ksz_sset_count,
+ .port_bridge_join = ksz_port_bridge_join,
+ .port_bridge_leave = ksz_port_bridge_leave,
+ .port_stp_state_set = ksz8795_port_stp_state_set,
+ .port_fast_age = ksz_port_fast_age,
+ .port_vlan_filtering = ksz8795_port_vlan_filtering,
+ .port_vlan_prepare = ksz_port_vlan_prepare,
+ .port_vlan_add = ksz8795_port_vlan_add,
+ .port_vlan_del = ksz8795_port_vlan_del,
+ .port_fdb_dump = ksz_port_fdb_dump,
+ .port_mdb_prepare = ksz_port_mdb_prepare,
+ .port_mdb_add = ksz_port_mdb_add,
+ .port_mdb_del = ksz_port_mdb_del,
+ .port_mirror_add = ksz8795_port_mirror_add,
+ .port_mirror_del = ksz8795_port_mirror_del,
+};
+
+static u32 ksz8795_get_port_addr(int port, int offset)
+{
+ return PORT_CTRL_ADDR(port, offset);
+}
+
+static int ksz8795_switch_detect(struct ksz_device *dev)
+{
+ u8 id1, id2;
+ u16 id16;
+ int ret;
+
+ /* read chip id */
+ ret = ksz_read16(dev, REG_CHIP_ID0, &id16);
+ if (ret)
+ return ret;
+
+ id1 = id16 >> 8;
+ id2 = id16 & SW_CHIP_ID_M;
+ if (id1 != FAMILY_ID ||
+ (id2 != CHIP_ID_94 && id2 != CHIP_ID_95))
+ return -ENODEV;
+
+ dev->mib_port_cnt = TOTAL_PORT_NUM;
+ dev->phy_port_cnt = SWITCH_PORT_NUM;
+ dev->port_cnt = SWITCH_PORT_NUM;
+
+ if (id2 == CHIP_ID_95) {
+ u8 val;
+
+ id2 = 0x95;
+ ksz_read8(dev, REG_PORT_1_STATUS_0, &val);
+ if (val & PORT_FIBER_MODE)
+ id2 = 0x65;
+ } else if (id2 == CHIP_ID_94) {
+ dev->port_cnt--;
+ dev->last_port = dev->port_cnt;
+ id2 = 0x94;
+ }
+ id16 &= ~0xff;
+ id16 |= id2;
+ dev->chip_id = id16;
+
+ dev->cpu_port = dev->mib_port_cnt - 1;
+ dev->host_mask = BIT(dev->cpu_port);
+
+ return 0;
+}
+
+struct ksz_chip_data {
+ u16 chip_id;
+ const char *dev_name;
+ int num_vlans;
+ int num_alus;
+ int num_statics;
+ int cpu_ports;
+ int port_cnt;
+};
+
+static const struct ksz_chip_data ksz8795_switch_chips[] = {
+ {
+ .chip_id = 0x8795,
+ .dev_name = "KSZ8795",
+ .num_vlans = 4096,
+ .num_alus = 0,
+ .num_statics = 8,
+ .cpu_ports = 0x10, /* can be configured as cpu port */
+ .port_cnt = 4, /* total physical port count */
+ },
+ {
+ .chip_id = 0x8794,
+ .dev_name = "KSZ8794",
+ .num_vlans = 4096,
+ .num_alus = 0,
+ .num_statics = 8,
+ .cpu_ports = 0x10, /* can be configured as cpu port */
+ .port_cnt = 3, /* total physical port count */
+ },
+ {
+ .chip_id = 0x8765,
+ .dev_name = "KSZ8765",
+ .num_vlans = 4096,
+ .num_alus = 0,
+ .num_statics = 8,
+ .cpu_ports = 0x10, /* can be configured as cpu port */
+ .port_cnt = 4, /* total physical port count */
+ },
+};
+
+static int ksz8795_switch_init(struct ksz_device *dev)
+{
+ int i;
+
+ mutex_init(&dev->stats_mutex);
+ mutex_init(&dev->alu_mutex);
+ mutex_init(&dev->vlan_mutex);
+
+ dev->ds->ops = &ksz8795_switch_ops;
+
+ for (i = 0; i < ARRAY_SIZE(ksz8795_switch_chips); i++) {
+ const struct ksz_chip_data *chip = &ksz8795_switch_chips[i];
+
+ if (dev->chip_id == chip->chip_id) {
+ dev->name = chip->dev_name;
+ dev->num_vlans = chip->num_vlans;
+ dev->num_alus = chip->num_alus;
+ dev->num_statics = chip->num_statics;
+ dev->port_cnt = chip->port_cnt;
+ dev->cpu_ports = chip->cpu_ports;
+
+ break;
+ }
+ }
+
+ /* no switch found */
+ if (!dev->cpu_ports)
+ return -ENODEV;
+
+ dev->port_mask = BIT(dev->port_cnt) - 1;
+ dev->port_mask |= dev->host_mask;
+
+ dev->reg_mib_cnt = SWITCH_COUNTER_NUM;
+ dev->mib_cnt = TOTAL_SWITCH_COUNTER_NUM;
+
+ i = dev->mib_port_cnt;
+ dev->ports = devm_kzalloc(dev->dev, sizeof(struct ksz_port) * i,
+ GFP_KERNEL);
+ if (!dev->ports)
+ return -ENOMEM;
+ for (i = 0; i < dev->mib_port_cnt; i++) {
+ mutex_init(&dev->ports[i].mib.cnt_mutex);
+ dev->ports[i].mib.counters =
+ devm_kzalloc(dev->dev,
+ sizeof(u64) *
+ (TOTAL_SWITCH_COUNTER_NUM + 1),
+ GFP_KERNEL);
+ if (!dev->ports[i].mib.counters)
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static void ksz8795_switch_exit(struct ksz_device *dev)
+{
+ ksz8795_reset_switch(dev);
+}
+
+static const struct ksz_dev_ops ksz8795_dev_ops = {
+ .get_port_addr = ksz8795_get_port_addr,
+ .cfg_port_member = ksz8795_cfg_port_member,
+ .flush_dyn_mac_table = ksz8795_flush_dyn_mac_table,
+ .port_setup = ksz8795_port_setup,
+ .r_phy = ksz8795_r_phy,
+ .w_phy = ksz8795_w_phy,
+ .r_dyn_mac_table = ksz8795_r_dyn_mac_table,
+ .r_sta_mac_table = ksz8795_r_sta_mac_table,
+ .w_sta_mac_table = ksz8795_w_sta_mac_table,
+ .r_mib_cnt = ksz8795_r_mib_cnt,
+ .r_mib_pkt = ksz8795_r_mib_pkt,
+ .freeze_mib = ksz8795_freeze_mib,
+ .port_init_cnt = ksz8795_port_init_cnt,
+ .shutdown = ksz8795_reset_switch,
+ .detect = ksz8795_switch_detect,
+ .init = ksz8795_switch_init,
+ .exit = ksz8795_switch_exit,
+};
+
+int ksz8795_switch_register(struct ksz_device *dev)
+{
+ return ksz_switch_register(dev, &ksz8795_dev_ops);
+}
+EXPORT_SYMBOL(ksz8795_switch_register);
+
+MODULE_AUTHOR("Tristram Ha <Tristram.Ha@microchip.com>");
+MODULE_DESCRIPTION("Microchip KSZ8795 Series Switch DSA Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/dsa/microchip/ksz8795_reg.h b/drivers/net/dsa/microchip/ksz8795_reg.h
new file mode 100644
index 000000000000..3a50462df8fa
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz8795_reg.h
@@ -0,0 +1,1004 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Microchip KSZ8795 register definitions
+ *
+ * Copyright (c) 2017 Microchip Technology Inc.
+ * Tristram Ha <Tristram.Ha@microchip.com>
+ */
+
+#ifndef __KSZ8795_REG_H
+#define __KSZ8795_REG_H
+
+#define KS_PORT_M 0x1F
+
+#define KS_PRIO_M 0x3
+#define KS_PRIO_S 2
+
+#define REG_CHIP_ID0 0x00
+
+#define FAMILY_ID 0x87
+
+#define REG_CHIP_ID1 0x01
+
+#define SW_CHIP_ID_M 0xF0
+#define SW_CHIP_ID_S 4
+#define SW_REVISION_M 0x0E
+#define SW_REVISION_S 1
+#define SW_START 0x01
+
+#define CHIP_ID_94 0x60
+#define CHIP_ID_95 0x90
+
+#define REG_SW_CTRL_0 0x02
+
+#define SW_NEW_BACKOFF BIT(7)
+#define SW_GLOBAL_RESET BIT(6)
+#define SW_FLUSH_DYN_MAC_TABLE BIT(5)
+#define SW_FLUSH_STA_MAC_TABLE BIT(4)
+#define SW_LINK_AUTO_AGING BIT(0)
+
+#define REG_SW_CTRL_1 0x03
+
+#define SW_HUGE_PACKET BIT(6)
+#define SW_TX_FLOW_CTRL_DISABLE BIT(5)
+#define SW_RX_FLOW_CTRL_DISABLE BIT(4)
+#define SW_CHECK_LENGTH BIT(3)
+#define SW_AGING_ENABLE BIT(2)
+#define SW_FAST_AGING BIT(1)
+#define SW_AGGR_BACKOFF BIT(0)
+
+#define REG_SW_CTRL_2 0x04
+
+#define UNICAST_VLAN_BOUNDARY BIT(7)
+#define MULTICAST_STORM_DISABLE BIT(6)
+#define SW_BACK_PRESSURE BIT(5)
+#define FAIR_FLOW_CTRL BIT(4)
+#define NO_EXC_COLLISION_DROP BIT(3)
+#define SW_LEGAL_PACKET_DISABLE BIT(1)
+
+#define REG_SW_CTRL_3 0x05
+ #define WEIGHTED_FAIR_QUEUE_ENABLE BIT(3)
+
+#define SW_VLAN_ENABLE BIT(7)
+#define SW_IGMP_SNOOP BIT(6)
+#define SW_MIRROR_RX_TX BIT(0)
+
+#define REG_SW_CTRL_4 0x06
+
+#define SW_HALF_DUPLEX_FLOW_CTRL BIT(7)
+#define SW_HALF_DUPLEX BIT(6)
+#define SW_FLOW_CTRL BIT(5)
+#define SW_10_MBIT BIT(4)
+#define SW_REPLACE_VID BIT(3)
+#define BROADCAST_STORM_RATE_HI 0x07
+
+#define REG_SW_CTRL_5 0x07
+
+#define BROADCAST_STORM_RATE_LO 0xFF
+#define BROADCAST_STORM_RATE 0x07FF
+
+#define REG_SW_CTRL_6 0x08
+
+#define SW_MIB_COUNTER_FLUSH BIT(7)
+#define SW_MIB_COUNTER_FREEZE BIT(6)
+#define SW_MIB_COUNTER_CTRL_ENABLE KS_PORT_M
+
+#define REG_SW_CTRL_9 0x0B
+
+#define SPI_CLK_125_MHZ 0x80
+#define SPI_CLK_62_5_MHZ 0x40
+#define SPI_CLK_31_25_MHZ 0x00
+
+#define SW_LED_MODE_M 0x3
+#define SW_LED_MODE_S 4
+#define SW_LED_LINK_ACT_SPEED 0
+#define SW_LED_LINK_ACT 1
+#define SW_LED_LINK_ACT_DUPLEX 2
+#define SW_LED_LINK_DUPLEX 3
+
+#define REG_SW_CTRL_10 0x0C
+
+#define SW_TAIL_TAG_ENABLE BIT(1)
+#define SW_PASS_PAUSE BIT(0)
+
+#define REG_SW_CTRL_11 0x0D
+
+#define REG_POWER_MANAGEMENT_1 0x0E
+
+#define SW_PLL_POWER_DOWN BIT(5)
+#define SW_POWER_MANAGEMENT_MODE_M 0x3
+#define SW_POWER_MANAGEMENT_MODE_S 3
+#define SW_POWER_NORMAL 0
+#define SW_ENERGY_DETECTION 1
+#define SW_SOFTWARE_POWER_DOWN 2
+
+#define REG_POWER_MANAGEMENT_2 0x0F
+
+#define REG_PORT_1_CTRL_0 0x10
+#define REG_PORT_2_CTRL_0 0x20
+#define REG_PORT_3_CTRL_0 0x30
+#define REG_PORT_4_CTRL_0 0x40
+#define REG_PORT_5_CTRL_0 0x50
+
+#define PORT_BROADCAST_STORM BIT(7)
+#define PORT_DIFFSERV_ENABLE BIT(6)
+#define PORT_802_1P_ENABLE BIT(5)
+#define PORT_BASED_PRIO_S 3
+#define PORT_BASED_PRIO_M KS_PRIO_M
+#define PORT_BASED_PRIO_0 0
+#define PORT_BASED_PRIO_1 1
+#define PORT_BASED_PRIO_2 2
+#define PORT_BASED_PRIO_3 3
+#define PORT_INSERT_TAG BIT(2)
+#define PORT_REMOVE_TAG BIT(1)
+#define PORT_QUEUE_SPLIT_L BIT(0)
+
+#define REG_PORT_1_CTRL_1 0x11
+#define REG_PORT_2_CTRL_1 0x21
+#define REG_PORT_3_CTRL_1 0x31
+#define REG_PORT_4_CTRL_1 0x41
+#define REG_PORT_5_CTRL_1 0x51
+
+#define PORT_MIRROR_SNIFFER BIT(7)
+#define PORT_MIRROR_RX BIT(6)
+#define PORT_MIRROR_TX BIT(5)
+#define PORT_VLAN_MEMBERSHIP KS_PORT_M
+
+#define REG_PORT_1_CTRL_2 0x12
+#define REG_PORT_2_CTRL_2 0x22
+#define REG_PORT_3_CTRL_2 0x32
+#define REG_PORT_4_CTRL_2 0x42
+#define REG_PORT_5_CTRL_2 0x52
+
+#define PORT_802_1P_REMAPPING BIT(7)
+#define PORT_INGRESS_FILTER BIT(6)
+#define PORT_DISCARD_NON_VID BIT(5)
+#define PORT_FORCE_FLOW_CTRL BIT(4)
+#define PORT_BACK_PRESSURE BIT(3)
+#define PORT_TX_ENABLE BIT(2)
+#define PORT_RX_ENABLE BIT(1)
+#define PORT_LEARN_DISABLE BIT(0)
+
+#define REG_PORT_1_CTRL_3 0x13
+#define REG_PORT_2_CTRL_3 0x23
+#define REG_PORT_3_CTRL_3 0x33
+#define REG_PORT_4_CTRL_3 0x43
+#define REG_PORT_5_CTRL_3 0x53
+#define REG_PORT_1_CTRL_4 0x14
+#define REG_PORT_2_CTRL_4 0x24
+#define REG_PORT_3_CTRL_4 0x34
+#define REG_PORT_4_CTRL_4 0x44
+#define REG_PORT_5_CTRL_4 0x54
+
+#define PORT_DEFAULT_VID 0x0001
+
+#define REG_PORT_1_CTRL_5 0x15
+#define REG_PORT_2_CTRL_5 0x25
+#define REG_PORT_3_CTRL_5 0x35
+#define REG_PORT_4_CTRL_5 0x45
+#define REG_PORT_5_CTRL_5 0x55
+
+#define PORT_ACL_ENABLE BIT(2)
+#define PORT_AUTHEN_MODE 0x3
+#define PORT_AUTHEN_PASS 0
+#define PORT_AUTHEN_BLOCK 1
+#define PORT_AUTHEN_TRAP 2
+
+#define REG_PORT_5_CTRL_6 0x56
+
+#define PORT_MII_INTERNAL_CLOCK BIT(7)
+#define PORT_GMII_1GPS_MODE BIT(6)
+#define PORT_RGMII_ID_IN_ENABLE BIT(4)
+#define PORT_RGMII_ID_OUT_ENABLE BIT(3)
+#define PORT_GMII_MAC_MODE BIT(2)
+#define PORT_INTERFACE_TYPE 0x3
+#define PORT_INTERFACE_MII 0
+#define PORT_INTERFACE_RMII 1
+#define PORT_INTERFACE_GMII 2
+#define PORT_INTERFACE_RGMII 3
+
+#define REG_PORT_1_CTRL_7 0x17
+#define REG_PORT_2_CTRL_7 0x27
+#define REG_PORT_3_CTRL_7 0x37
+#define REG_PORT_4_CTRL_7 0x47
+
+#define PORT_AUTO_NEG_ASYM_PAUSE BIT(5)
+#define PORT_AUTO_NEG_SYM_PAUSE BIT(4)
+#define PORT_AUTO_NEG_100BTX_FD BIT(3)
+#define PORT_AUTO_NEG_100BTX BIT(2)
+#define PORT_AUTO_NEG_10BT_FD BIT(1)
+#define PORT_AUTO_NEG_10BT BIT(0)
+
+#define REG_PORT_1_STATUS_0 0x18
+#define REG_PORT_2_STATUS_0 0x28
+#define REG_PORT_3_STATUS_0 0x38
+#define REG_PORT_4_STATUS_0 0x48
+
+/* For KSZ8765. */
+#define PORT_FIBER_MODE BIT(7)
+
+#define PORT_REMOTE_ASYM_PAUSE BIT(5)
+#define PORT_REMOTE_SYM_PAUSE BIT(4)
+#define PORT_REMOTE_100BTX_FD BIT(3)
+#define PORT_REMOTE_100BTX BIT(2)
+#define PORT_REMOTE_10BT_FD BIT(1)
+#define PORT_REMOTE_10BT BIT(0)
+
+#define REG_PORT_1_STATUS_1 0x19
+#define REG_PORT_2_STATUS_1 0x29
+#define REG_PORT_3_STATUS_1 0x39
+#define REG_PORT_4_STATUS_1 0x49
+
+#define PORT_HP_MDIX BIT(7)
+#define PORT_REVERSED_POLARITY BIT(5)
+#define PORT_TX_FLOW_CTRL BIT(4)
+#define PORT_RX_FLOW_CTRL BIT(3)
+#define PORT_STAT_SPEED_100MBIT BIT(2)
+#define PORT_STAT_FULL_DUPLEX BIT(1)
+
+#define PORT_REMOTE_FAULT BIT(0)
+
+#define REG_PORT_1_LINK_MD_CTRL 0x1A
+#define REG_PORT_2_LINK_MD_CTRL 0x2A
+#define REG_PORT_3_LINK_MD_CTRL 0x3A
+#define REG_PORT_4_LINK_MD_CTRL 0x4A
+
+#define PORT_CABLE_10M_SHORT BIT(7)
+#define PORT_CABLE_DIAG_RESULT_M 0x3
+#define PORT_CABLE_DIAG_RESULT_S 5
+#define PORT_CABLE_STAT_NORMAL 0
+#define PORT_CABLE_STAT_OPEN 1
+#define PORT_CABLE_STAT_SHORT 2
+#define PORT_CABLE_STAT_FAILED 3
+#define PORT_START_CABLE_DIAG BIT(4)
+#define PORT_FORCE_LINK BIT(3)
+#define PORT_POWER_SAVING BIT(2)
+#define PORT_PHY_REMOTE_LOOPBACK BIT(1)
+#define PORT_CABLE_FAULT_COUNTER_H 0x01
+
+#define REG_PORT_1_LINK_MD_RESULT 0x1B
+#define REG_PORT_2_LINK_MD_RESULT 0x2B
+#define REG_PORT_3_LINK_MD_RESULT 0x3B
+#define REG_PORT_4_LINK_MD_RESULT 0x4B
+
+#define PORT_CABLE_FAULT_COUNTER_L 0xFF
+#define PORT_CABLE_FAULT_COUNTER 0x1FF
+
+#define REG_PORT_1_CTRL_9 0x1C
+#define REG_PORT_2_CTRL_9 0x2C
+#define REG_PORT_3_CTRL_9 0x3C
+#define REG_PORT_4_CTRL_9 0x4C
+
+#define PORT_AUTO_NEG_DISABLE BIT(7)
+#define PORT_FORCE_100_MBIT BIT(6)
+#define PORT_FORCE_FULL_DUPLEX BIT(5)
+
+#define REG_PORT_1_CTRL_10 0x1D
+#define REG_PORT_2_CTRL_10 0x2D
+#define REG_PORT_3_CTRL_10 0x3D
+#define REG_PORT_4_CTRL_10 0x4D
+
+#define PORT_LED_OFF BIT(7)
+#define PORT_TX_DISABLE BIT(6)
+#define PORT_AUTO_NEG_RESTART BIT(5)
+#define PORT_POWER_DOWN BIT(3)
+#define PORT_AUTO_MDIX_DISABLE BIT(2)
+#define PORT_FORCE_MDIX BIT(1)
+#define PORT_MAC_LOOPBACK BIT(0)
+
+#define REG_PORT_1_STATUS_2 0x1E
+#define REG_PORT_2_STATUS_2 0x2E
+#define REG_PORT_3_STATUS_2 0x3E
+#define REG_PORT_4_STATUS_2 0x4E
+
+#define PORT_MDIX_STATUS BIT(7)
+#define PORT_AUTO_NEG_COMPLETE BIT(6)
+#define PORT_STAT_LINK_GOOD BIT(5)
+
+#define REG_PORT_1_STATUS_3 0x1F
+#define REG_PORT_2_STATUS_3 0x2F
+#define REG_PORT_3_STATUS_3 0x3F
+#define REG_PORT_4_STATUS_3 0x4F
+
+#define PORT_PHY_LOOPBACK BIT(7)
+#define PORT_PHY_ISOLATE BIT(5)
+#define PORT_PHY_SOFT_RESET BIT(4)
+#define PORT_PHY_FORCE_LINK BIT(3)
+#define PORT_PHY_MODE_M 0x7
+#define PHY_MODE_IN_AUTO_NEG 1
+#define PHY_MODE_10BT_HALF 2
+#define PHY_MODE_100BT_HALF 3
+#define PHY_MODE_10BT_FULL 5
+#define PHY_MODE_100BT_FULL 6
+#define PHY_MODE_ISOLDATE 7
+
+#define REG_PORT_CTRL_0 0x00
+#define REG_PORT_CTRL_1 0x01
+#define REG_PORT_CTRL_2 0x02
+#define REG_PORT_CTRL_VID 0x03
+
+#define REG_PORT_CTRL_5 0x05
+
+#define REG_PORT_CTRL_7 0x07
+#define REG_PORT_STATUS_0 0x08
+#define REG_PORT_STATUS_1 0x09
+#define REG_PORT_LINK_MD_CTRL 0x0A
+#define REG_PORT_LINK_MD_RESULT 0x0B
+#define REG_PORT_CTRL_9 0x0C
+#define REG_PORT_CTRL_10 0x0D
+#define REG_PORT_STATUS_2 0x0E
+#define REG_PORT_STATUS_3 0x0F
+
+#define REG_PORT_CTRL_12 0xA0
+#define REG_PORT_CTRL_13 0xA1
+#define REG_PORT_RATE_CTRL_3 0xA2
+#define REG_PORT_RATE_CTRL_2 0xA3
+#define REG_PORT_RATE_CTRL_1 0xA4
+#define REG_PORT_RATE_CTRL_0 0xA5
+#define REG_PORT_RATE_LIMIT 0xA6
+#define REG_PORT_IN_RATE_0 0xA7
+#define REG_PORT_IN_RATE_1 0xA8
+#define REG_PORT_IN_RATE_2 0xA9
+#define REG_PORT_IN_RATE_3 0xAA
+#define REG_PORT_OUT_RATE_0 0xAB
+#define REG_PORT_OUT_RATE_1 0xAC
+#define REG_PORT_OUT_RATE_2 0xAD
+#define REG_PORT_OUT_RATE_3 0xAE
+
+#define PORT_CTRL_ADDR(port, addr) \
+ ((addr) + REG_PORT_1_CTRL_0 + (port) * \
+ (REG_PORT_2_CTRL_0 - REG_PORT_1_CTRL_0))
+
+#define REG_SW_MAC_ADDR_0 0x68
+#define REG_SW_MAC_ADDR_1 0x69
+#define REG_SW_MAC_ADDR_2 0x6A
+#define REG_SW_MAC_ADDR_3 0x6B
+#define REG_SW_MAC_ADDR_4 0x6C
+#define REG_SW_MAC_ADDR_5 0x6D
+
+#define REG_IND_CTRL_0 0x6E
+
+#define TABLE_EXT_SELECT_S 5
+#define TABLE_EEE_V 1
+#define TABLE_ACL_V 2
+#define TABLE_PME_V 4
+#define TABLE_LINK_MD_V 5
+#define TABLE_EEE (TABLE_EEE_V << TABLE_EXT_SELECT_S)
+#define TABLE_ACL (TABLE_ACL_V << TABLE_EXT_SELECT_S)
+#define TABLE_PME (TABLE_PME_V << TABLE_EXT_SELECT_S)
+#define TABLE_LINK_MD (TABLE_LINK_MD << TABLE_EXT_SELECT_S)
+#define TABLE_READ BIT(4)
+#define TABLE_SELECT_S 2
+#define TABLE_STATIC_MAC_V 0
+#define TABLE_VLAN_V 1
+#define TABLE_DYNAMIC_MAC_V 2
+#define TABLE_MIB_V 3
+#define TABLE_STATIC_MAC (TABLE_STATIC_MAC_V << TABLE_SELECT_S)
+#define TABLE_VLAN (TABLE_VLAN_V << TABLE_SELECT_S)
+#define TABLE_DYNAMIC_MAC (TABLE_DYNAMIC_MAC_V << TABLE_SELECT_S)
+#define TABLE_MIB (TABLE_MIB_V << TABLE_SELECT_S)
+
+#define REG_IND_CTRL_1 0x6F
+
+#define TABLE_ENTRY_MASK 0x03FF
+#define TABLE_EXT_ENTRY_MASK 0x0FFF
+
+#define REG_IND_DATA_8 0x70
+#define REG_IND_DATA_7 0x71
+#define REG_IND_DATA_6 0x72
+#define REG_IND_DATA_5 0x73
+#define REG_IND_DATA_4 0x74
+#define REG_IND_DATA_3 0x75
+#define REG_IND_DATA_2 0x76
+#define REG_IND_DATA_1 0x77
+#define REG_IND_DATA_0 0x78
+
+#define REG_IND_DATA_PME_EEE_ACL 0xA0
+
+#define REG_IND_DATA_CHECK REG_IND_DATA_6
+#define REG_IND_MIB_CHECK REG_IND_DATA_4
+#define REG_IND_DATA_HI REG_IND_DATA_7
+#define REG_IND_DATA_LO REG_IND_DATA_3
+
+#define REG_INT_STATUS 0x7C
+#define REG_INT_ENABLE 0x7D
+
+#define INT_PME BIT(4)
+
+#define REG_ACL_INT_STATUS 0x7E
+#define REG_ACL_INT_ENABLE 0x7F
+
+#define INT_PORT_5 BIT(4)
+#define INT_PORT_4 BIT(3)
+#define INT_PORT_3 BIT(2)
+#define INT_PORT_2 BIT(1)
+#define INT_PORT_1 BIT(0)
+
+#define INT_PORT_ALL \
+ (INT_PORT_5 | INT_PORT_4 | INT_PORT_3 | INT_PORT_2 | INT_PORT_1)
+
+#define REG_SW_CTRL_12 0x80
+#define REG_SW_CTRL_13 0x81
+
+#define SWITCH_802_1P_MASK 3
+#define SWITCH_802_1P_BASE 3
+#define SWITCH_802_1P_SHIFT 2
+
+#define SW_802_1P_MAP_M KS_PRIO_M
+#define SW_802_1P_MAP_S KS_PRIO_S
+
+#define REG_SWITCH_CTRL_14 0x82
+
+#define SW_PRIO_MAPPING_M KS_PRIO_M
+#define SW_PRIO_MAPPING_S 6
+#define SW_PRIO_MAP_3_HI 0
+#define SW_PRIO_MAP_2_HI 2
+#define SW_PRIO_MAP_0_LO 3
+
+#define REG_SW_CTRL_15 0x83
+#define REG_SW_CTRL_16 0x84
+#define REG_SW_CTRL_17 0x85
+#define REG_SW_CTRL_18 0x86
+
+#define SW_SELF_ADDR_FILTER_ENABLE BIT(6)
+
+#define REG_SW_UNK_UCAST_CTRL 0x83
+#define REG_SW_UNK_MCAST_CTRL 0x84
+#define REG_SW_UNK_VID_CTRL 0x85
+#define REG_SW_UNK_IP_MCAST_CTRL 0x86
+
+#define SW_UNK_FWD_ENABLE BIT(5)
+#define SW_UNK_FWD_MAP KS_PORT_M
+
+#define REG_SW_CTRL_19 0x87
+
+#define SW_IN_RATE_LIMIT_PERIOD_M 0x3
+#define SW_IN_RATE_LIMIT_PERIOD_S 4
+#define SW_IN_RATE_LIMIT_16_MS 0
+#define SW_IN_RATE_LIMIT_64_MS 1
+#define SW_IN_RATE_LIMIT_256_MS 2
+#define SW_OUT_RATE_LIMIT_QUEUE_BASED BIT(3)
+#define SW_INS_TAG_ENABLE BIT(2)
+
+#define REG_TOS_PRIO_CTRL_0 0x90
+#define REG_TOS_PRIO_CTRL_1 0x91
+#define REG_TOS_PRIO_CTRL_2 0x92
+#define REG_TOS_PRIO_CTRL_3 0x93
+#define REG_TOS_PRIO_CTRL_4 0x94
+#define REG_TOS_PRIO_CTRL_5 0x95
+#define REG_TOS_PRIO_CTRL_6 0x96
+#define REG_TOS_PRIO_CTRL_7 0x97
+#define REG_TOS_PRIO_CTRL_8 0x98
+#define REG_TOS_PRIO_CTRL_9 0x99
+#define REG_TOS_PRIO_CTRL_10 0x9A
+#define REG_TOS_PRIO_CTRL_11 0x9B
+#define REG_TOS_PRIO_CTRL_12 0x9C
+#define REG_TOS_PRIO_CTRL_13 0x9D
+#define REG_TOS_PRIO_CTRL_14 0x9E
+#define REG_TOS_PRIO_CTRL_15 0x9F
+
+#define TOS_PRIO_M KS_PRIO_M
+#define TOS_PRIO_S KS_PRIO_S
+
+#define REG_SW_CTRL_20 0xA3
+
+#define SW_GMII_DRIVE_STRENGTH_S 4
+#define SW_DRIVE_STRENGTH_M 0x7
+#define SW_DRIVE_STRENGTH_2MA 0
+#define SW_DRIVE_STRENGTH_4MA 1
+#define SW_DRIVE_STRENGTH_8MA 2
+#define SW_DRIVE_STRENGTH_12MA 3
+#define SW_DRIVE_STRENGTH_16MA 4
+#define SW_DRIVE_STRENGTH_20MA 5
+#define SW_DRIVE_STRENGTH_24MA 6
+#define SW_DRIVE_STRENGTH_28MA 7
+#define SW_MII_DRIVE_STRENGTH_S 0
+
+#define REG_SW_CTRL_21 0xA4
+
+#define SW_IPV6_MLD_OPTION BIT(3)
+#define SW_IPV6_MLD_SNOOP BIT(2)
+
+#define REG_PORT_1_CTRL_12 0xB0
+#define REG_PORT_2_CTRL_12 0xC0
+#define REG_PORT_3_CTRL_12 0xD0
+#define REG_PORT_4_CTRL_12 0xE0
+#define REG_PORT_5_CTRL_12 0xF0
+
+#define PORT_PASS_ALL BIT(6)
+#define PORT_INS_TAG_FOR_PORT_5_S 3
+#define PORT_INS_TAG_FOR_PORT_5 BIT(3)
+#define PORT_INS_TAG_FOR_PORT_4 BIT(2)
+#define PORT_INS_TAG_FOR_PORT_3 BIT(1)
+#define PORT_INS_TAG_FOR_PORT_2 BIT(0)
+
+#define REG_PORT_1_CTRL_13 0xB1
+#define REG_PORT_2_CTRL_13 0xC1
+#define REG_PORT_3_CTRL_13 0xD1
+#define REG_PORT_4_CTRL_13 0xE1
+#define REG_PORT_5_CTRL_13 0xF1
+
+#define PORT_QUEUE_SPLIT_H BIT(1)
+#define PORT_QUEUE_SPLIT_1 0
+#define PORT_QUEUE_SPLIT_2 1
+#define PORT_QUEUE_SPLIT_4 2
+#define PORT_DROP_TAG BIT(0)
+
+#define REG_PORT_1_CTRL_14 0xB2
+#define REG_PORT_2_CTRL_14 0xC2
+#define REG_PORT_3_CTRL_14 0xD2
+#define REG_PORT_4_CTRL_14 0xE2
+#define REG_PORT_5_CTRL_14 0xF2
+#define REG_PORT_1_CTRL_15 0xB3
+#define REG_PORT_2_CTRL_15 0xC3
+#define REG_PORT_3_CTRL_15 0xD3
+#define REG_PORT_4_CTRL_15 0xE3
+#define REG_PORT_5_CTRL_15 0xF3
+#define REG_PORT_1_CTRL_16 0xB4
+#define REG_PORT_2_CTRL_16 0xC4
+#define REG_PORT_3_CTRL_16 0xD4
+#define REG_PORT_4_CTRL_16 0xE4
+#define REG_PORT_5_CTRL_16 0xF4
+#define REG_PORT_1_CTRL_17 0xB5
+#define REG_PORT_2_CTRL_17 0xC5
+#define REG_PORT_3_CTRL_17 0xD5
+#define REG_PORT_4_CTRL_17 0xE5
+#define REG_PORT_5_CTRL_17 0xF5
+
+#define REG_PORT_1_RATE_CTRL_3 0xB2
+#define REG_PORT_1_RATE_CTRL_2 0xB3
+#define REG_PORT_1_RATE_CTRL_1 0xB4
+#define REG_PORT_1_RATE_CTRL_0 0xB5
+#define REG_PORT_2_RATE_CTRL_3 0xC2
+#define REG_PORT_2_RATE_CTRL_2 0xC3
+#define REG_PORT_2_RATE_CTRL_1 0xC4
+#define REG_PORT_2_RATE_CTRL_0 0xC5
+#define REG_PORT_3_RATE_CTRL_3 0xD2
+#define REG_PORT_3_RATE_CTRL_2 0xD3
+#define REG_PORT_3_RATE_CTRL_1 0xD4
+#define REG_PORT_3_RATE_CTRL_0 0xD5
+#define REG_PORT_4_RATE_CTRL_3 0xE2
+#define REG_PORT_4_RATE_CTRL_2 0xE3
+#define REG_PORT_4_RATE_CTRL_1 0xE4
+#define REG_PORT_4_RATE_CTRL_0 0xE5
+#define REG_PORT_5_RATE_CTRL_3 0xF2
+#define REG_PORT_5_RATE_CTRL_2 0xF3
+#define REG_PORT_5_RATE_CTRL_1 0xF4
+#define REG_PORT_5_RATE_CTRL_0 0xF5
+
+#define RATE_CTRL_ENABLE BIT(7)
+#define RATE_RATIO_M (BIT(7) - 1)
+
+#define PORT_OUT_RATE_ENABLE BIT(7)
+
+#define REG_PORT_1_RATE_LIMIT 0xB6
+#define REG_PORT_2_RATE_LIMIT 0xC6
+#define REG_PORT_3_RATE_LIMIT 0xD6
+#define REG_PORT_4_RATE_LIMIT 0xE6
+#define REG_PORT_5_RATE_LIMIT 0xF6
+
+#define PORT_IN_PORT_BASED_S 6
+#define PORT_RATE_PACKET_BASED_S 5
+#define PORT_IN_FLOW_CTRL_S 4
+#define PORT_IN_LIMIT_MODE_M 0x3
+#define PORT_IN_LIMIT_MODE_S 2
+#define PORT_COUNT_IFG_S 1
+#define PORT_COUNT_PREAMBLE_S 0
+#define PORT_IN_PORT_BASED BIT(PORT_IN_PORT_BASED_S)
+#define PORT_RATE_PACKET_BASED BIT(PORT_RATE_PACKET_BASED_S)
+#define PORT_IN_FLOW_CTRL BIT(PORT_IN_FLOW_CTRL_S)
+#define PORT_IN_ALL 0
+#define PORT_IN_UNICAST 1
+#define PORT_IN_MULTICAST 2
+#define PORT_IN_BROADCAST 3
+#define PORT_COUNT_IFG BIT(PORT_COUNT_IFG_S)
+#define PORT_COUNT_PREAMBLE BIT(PORT_COUNT_PREAMBLE_S)
+
+#define REG_PORT_1_IN_RATE_0 0xB7
+#define REG_PORT_2_IN_RATE_0 0xC7
+#define REG_PORT_3_IN_RATE_0 0xD7
+#define REG_PORT_4_IN_RATE_0 0xE7
+#define REG_PORT_5_IN_RATE_0 0xF7
+#define REG_PORT_1_IN_RATE_1 0xB8
+#define REG_PORT_2_IN_RATE_1 0xC8
+#define REG_PORT_3_IN_RATE_1 0xD8
+#define REG_PORT_4_IN_RATE_1 0xE8
+#define REG_PORT_5_IN_RATE_1 0xF8
+#define REG_PORT_1_IN_RATE_2 0xB9
+#define REG_PORT_2_IN_RATE_2 0xC9
+#define REG_PORT_3_IN_RATE_2 0xD9
+#define REG_PORT_4_IN_RATE_2 0xE9
+#define REG_PORT_5_IN_RATE_2 0xF9
+#define REG_PORT_1_IN_RATE_3 0xBA
+#define REG_PORT_2_IN_RATE_3 0xCA
+#define REG_PORT_3_IN_RATE_3 0xDA
+#define REG_PORT_4_IN_RATE_3 0xEA
+#define REG_PORT_5_IN_RATE_3 0xFA
+
+#define PORT_IN_RATE_ENABLE BIT(7)
+#define PORT_RATE_LIMIT_M (BIT(7) - 1)
+
+#define REG_PORT_1_OUT_RATE_0 0xBB
+#define REG_PORT_2_OUT_RATE_0 0xCB
+#define REG_PORT_3_OUT_RATE_0 0xDB
+#define REG_PORT_4_OUT_RATE_0 0xEB
+#define REG_PORT_5_OUT_RATE_0 0xFB
+#define REG_PORT_1_OUT_RATE_1 0xBC
+#define REG_PORT_2_OUT_RATE_1 0xCC
+#define REG_PORT_3_OUT_RATE_1 0xDC
+#define REG_PORT_4_OUT_RATE_1 0xEC
+#define REG_PORT_5_OUT_RATE_1 0xFC
+#define REG_PORT_1_OUT_RATE_2 0xBD
+#define REG_PORT_2_OUT_RATE_2 0xCD
+#define REG_PORT_3_OUT_RATE_2 0xDD
+#define REG_PORT_4_OUT_RATE_2 0xED
+#define REG_PORT_5_OUT_RATE_2 0xFD
+#define REG_PORT_1_OUT_RATE_3 0xBE
+#define REG_PORT_2_OUT_RATE_3 0xCE
+#define REG_PORT_3_OUT_RATE_3 0xDE
+#define REG_PORT_4_OUT_RATE_3 0xEE
+#define REG_PORT_5_OUT_RATE_3 0xFE
+
+/* PME */
+
+#define SW_PME_OUTPUT_ENABLE BIT(1)
+#define SW_PME_ACTIVE_HIGH BIT(0)
+
+#define PORT_MAGIC_PACKET_DETECT BIT(2)
+#define PORT_LINK_UP_DETECT BIT(1)
+#define PORT_ENERGY_DETECT BIT(0)
+
+/* ACL */
+
+#define ACL_FIRST_RULE_M 0xF
+
+#define ACL_MODE_M 0x3
+#define ACL_MODE_S 4
+#define ACL_MODE_DISABLE 0
+#define ACL_MODE_LAYER_2 1
+#define ACL_MODE_LAYER_3 2
+#define ACL_MODE_LAYER_4 3
+#define ACL_ENABLE_M 0x3
+#define ACL_ENABLE_S 2
+#define ACL_ENABLE_2_COUNT 0
+#define ACL_ENABLE_2_TYPE 1
+#define ACL_ENABLE_2_MAC 2
+#define ACL_ENABLE_2_BOTH 3
+#define ACL_ENABLE_3_IP 1
+#define ACL_ENABLE_3_SRC_DST_COMP 2
+#define ACL_ENABLE_4_PROTOCOL 0
+#define ACL_ENABLE_4_TCP_PORT_COMP 1
+#define ACL_ENABLE_4_UDP_PORT_COMP 2
+#define ACL_ENABLE_4_TCP_SEQN_COMP 3
+#define ACL_SRC BIT(1)
+#define ACL_EQUAL BIT(0)
+
+#define ACL_MAX_PORT 0xFFFF
+
+#define ACL_MIN_PORT 0xFFFF
+#define ACL_IP_ADDR 0xFFFFFFFF
+#define ACL_TCP_SEQNUM 0xFFFFFFFF
+
+#define ACL_RESERVED 0xF8
+#define ACL_PORT_MODE_M 0x3
+#define ACL_PORT_MODE_S 1
+#define ACL_PORT_MODE_DISABLE 0
+#define ACL_PORT_MODE_EITHER 1
+#define ACL_PORT_MODE_IN_RANGE 2
+#define ACL_PORT_MODE_OUT_OF_RANGE 3
+
+#define ACL_TCP_FLAG_ENABLE BIT(0)
+
+#define ACL_TCP_FLAG_M 0xFF
+
+#define ACL_TCP_FLAG 0xFF
+#define ACL_ETH_TYPE 0xFFFF
+#define ACL_IP_M 0xFFFFFFFF
+
+#define ACL_PRIO_MODE_M 0x3
+#define ACL_PRIO_MODE_S 6
+#define ACL_PRIO_MODE_DISABLE 0
+#define ACL_PRIO_MODE_HIGHER 1
+#define ACL_PRIO_MODE_LOWER 2
+#define ACL_PRIO_MODE_REPLACE 3
+#define ACL_PRIO_M 0x7
+#define ACL_PRIO_S 3
+#define ACL_VLAN_PRIO_REPLACE BIT(2)
+#define ACL_VLAN_PRIO_M 0x7
+#define ACL_VLAN_PRIO_HI_M 0x3
+
+#define ACL_VLAN_PRIO_LO_M 0x8
+#define ACL_VLAN_PRIO_S 7
+#define ACL_MAP_MODE_M 0x3
+#define ACL_MAP_MODE_S 5
+#define ACL_MAP_MODE_DISABLE 0
+#define ACL_MAP_MODE_OR 1
+#define ACL_MAP_MODE_AND 2
+#define ACL_MAP_MODE_REPLACE 3
+#define ACL_MAP_PORT_M 0x1F
+
+#define ACL_CNT_M (BIT(11) - 1)
+#define ACL_CNT_S 5
+#define ACL_MSEC_UNIT BIT(4)
+#define ACL_INTR_MODE BIT(3)
+
+#define REG_PORT_ACL_BYTE_EN_MSB 0x10
+
+#define ACL_BYTE_EN_MSB_M 0x3F
+
+#define REG_PORT_ACL_BYTE_EN_LSB 0x11
+
+#define ACL_ACTION_START 0xA
+#define ACL_ACTION_LEN 2
+#define ACL_INTR_CNT_START 0xB
+#define ACL_RULESET_START 0xC
+#define ACL_RULESET_LEN 2
+#define ACL_TABLE_LEN 14
+
+#define ACL_ACTION_ENABLE 0x000C
+#define ACL_MATCH_ENABLE 0x1FF0
+#define ACL_RULESET_ENABLE 0x2003
+#define ACL_BYTE_ENABLE ((ACL_BYTE_EN_MSB_M << 8) | 0xFF)
+#define ACL_MODE_ENABLE (0x10 << 8)
+
+#define REG_PORT_ACL_CTRL_0 0x12
+
+#define PORT_ACL_WRITE_DONE BIT(6)
+#define PORT_ACL_READ_DONE BIT(5)
+#define PORT_ACL_WRITE BIT(4)
+#define PORT_ACL_INDEX_M 0xF
+
+#define REG_PORT_ACL_CTRL_1 0x13
+
+#define PORT_ACL_FORCE_DLR_MISS BIT(0)
+
+#ifndef PHY_REG_CTRL
+#define PHY_REG_CTRL 0
+
+#define PHY_RESET BIT(15)
+#define PHY_LOOPBACK BIT(14)
+#define PHY_SPEED_100MBIT BIT(13)
+#define PHY_AUTO_NEG_ENABLE BIT(12)
+#define PHY_POWER_DOWN BIT(11)
+#define PHY_MII_DISABLE BIT(10)
+#define PHY_AUTO_NEG_RESTART BIT(9)
+#define PHY_FULL_DUPLEX BIT(8)
+#define PHY_COLLISION_TEST_NOT BIT(7)
+#define PHY_HP_MDIX BIT(5)
+#define PHY_FORCE_MDIX BIT(4)
+#define PHY_AUTO_MDIX_DISABLE BIT(3)
+#define PHY_REMOTE_FAULT_DISABLE BIT(2)
+#define PHY_TRANSMIT_DISABLE BIT(1)
+#define PHY_LED_DISABLE BIT(0)
+
+#define PHY_REG_STATUS 1
+
+#define PHY_100BT4_CAPABLE BIT(15)
+#define PHY_100BTX_FD_CAPABLE BIT(14)
+#define PHY_100BTX_CAPABLE BIT(13)
+#define PHY_10BT_FD_CAPABLE BIT(12)
+#define PHY_10BT_CAPABLE BIT(11)
+#define PHY_MII_SUPPRESS_CAPABLE_NOT BIT(6)
+#define PHY_AUTO_NEG_ACKNOWLEDGE BIT(5)
+#define PHY_REMOTE_FAULT BIT(4)
+#define PHY_AUTO_NEG_CAPABLE BIT(3)
+#define PHY_LINK_STATUS BIT(2)
+#define PHY_JABBER_DETECT_NOT BIT(1)
+#define PHY_EXTENDED_CAPABILITY BIT(0)
+
+#define PHY_REG_ID_1 2
+#define PHY_REG_ID_2 3
+
+#define PHY_REG_AUTO_NEGOTIATION 4
+
+#define PHY_AUTO_NEG_NEXT_PAGE_NOT BIT(15)
+#define PHY_AUTO_NEG_REMOTE_FAULT_NOT BIT(13)
+#define PHY_AUTO_NEG_SYM_PAUSE BIT(10)
+#define PHY_AUTO_NEG_100BT4 BIT(9)
+#define PHY_AUTO_NEG_100BTX_FD BIT(8)
+#define PHY_AUTO_NEG_100BTX BIT(7)
+#define PHY_AUTO_NEG_10BT_FD BIT(6)
+#define PHY_AUTO_NEG_10BT BIT(5)
+#define PHY_AUTO_NEG_SELECTOR 0x001F
+#define PHY_AUTO_NEG_802_3 0x0001
+
+#define PHY_REG_REMOTE_CAPABILITY 5
+
+#define PHY_REMOTE_NEXT_PAGE_NOT BIT(15)
+#define PHY_REMOTE_ACKNOWLEDGE_NOT BIT(14)
+#define PHY_REMOTE_REMOTE_FAULT_NOT BIT(13)
+#define PHY_REMOTE_SYM_PAUSE BIT(10)
+#define PHY_REMOTE_100BTX_FD BIT(8)
+#define PHY_REMOTE_100BTX BIT(7)
+#define PHY_REMOTE_10BT_FD BIT(6)
+#define PHY_REMOTE_10BT BIT(5)
+#endif
+
+#define KSZ8795_ID_HI 0x0022
+#define KSZ8795_ID_LO 0x1550
+
+#define KSZ8795_SW_ID 0x8795
+
+#define PHY_REG_LINK_MD 0x1D
+
+#define PHY_START_CABLE_DIAG BIT(15)
+#define PHY_CABLE_DIAG_RESULT 0x6000
+#define PHY_CABLE_STAT_NORMAL 0x0000
+#define PHY_CABLE_STAT_OPEN 0x2000
+#define PHY_CABLE_STAT_SHORT 0x4000
+#define PHY_CABLE_STAT_FAILED 0x6000
+#define PHY_CABLE_10M_SHORT BIT(12)
+#define PHY_CABLE_FAULT_COUNTER 0x01FF
+
+#define PHY_REG_PHY_CTRL 0x1F
+
+#define PHY_MODE_M 0x7
+#define PHY_MODE_S 8
+#define PHY_STAT_REVERSED_POLARITY BIT(5)
+#define PHY_STAT_MDIX BIT(4)
+#define PHY_FORCE_LINK BIT(3)
+#define PHY_POWER_SAVING_ENABLE BIT(2)
+#define PHY_REMOTE_LOOPBACK BIT(1)
+
+/* Chip resource */
+
+#define PRIO_QUEUES 4
+
+#define KS_PRIO_IN_REG 4
+
+#define TOTAL_PORT_NUM 5
+
+/* Host port can only be last of them. */
+#define SWITCH_PORT_NUM (TOTAL_PORT_NUM - 1)
+
+#define KSZ8795_COUNTER_NUM 0x20
+#define TOTAL_KSZ8795_COUNTER_NUM (KSZ8795_COUNTER_NUM + 4)
+
+#define SWITCH_COUNTER_NUM KSZ8795_COUNTER_NUM
+#define TOTAL_SWITCH_COUNTER_NUM TOTAL_KSZ8795_COUNTER_NUM
+
+/* Common names used by other drivers */
+
+#define P_BCAST_STORM_CTRL REG_PORT_CTRL_0
+#define P_PRIO_CTRL REG_PORT_CTRL_0
+#define P_TAG_CTRL REG_PORT_CTRL_0
+#define P_MIRROR_CTRL REG_PORT_CTRL_1
+#define P_802_1P_CTRL REG_PORT_CTRL_2
+#define P_STP_CTRL REG_PORT_CTRL_2
+#define P_LOCAL_CTRL REG_PORT_CTRL_7
+#define P_REMOTE_STATUS REG_PORT_STATUS_0
+#define P_FORCE_CTRL REG_PORT_CTRL_9
+#define P_NEG_RESTART_CTRL REG_PORT_CTRL_10
+#define P_SPEED_STATUS REG_PORT_STATUS_1
+#define P_LINK_STATUS REG_PORT_STATUS_2
+#define P_PASS_ALL_CTRL REG_PORT_CTRL_12
+#define P_INS_SRC_PVID_CTRL REG_PORT_CTRL_12
+#define P_DROP_TAG_CTRL REG_PORT_CTRL_13
+#define P_RATE_LIMIT_CTRL REG_PORT_RATE_LIMIT
+
+#define S_UNKNOWN_DA_CTRL REG_SWITCH_CTRL_12
+#define S_FORWARD_INVALID_VID_CTRL REG_FORWARD_INVALID_VID
+
+#define S_FLUSH_TABLE_CTRL REG_SW_CTRL_0
+#define S_LINK_AGING_CTRL REG_SW_CTRL_0
+#define S_HUGE_PACKET_CTRL REG_SW_CTRL_1
+#define S_MIRROR_CTRL REG_SW_CTRL_3
+#define S_REPLACE_VID_CTRL REG_SW_CTRL_4
+#define S_PASS_PAUSE_CTRL REG_SW_CTRL_10
+#define S_TAIL_TAG_CTRL REG_SW_CTRL_10
+#define S_802_1P_PRIO_CTRL REG_SW_CTRL_12
+#define S_TOS_PRIO_CTRL REG_TOS_PRIO_CTRL_0
+#define S_IPV6_MLD_CTRL REG_SW_CTRL_21
+
+#define IND_ACC_TABLE(table) ((table) << 8)
+
+/* Driver set switch broadcast storm protection at 10% rate. */
+#define BROADCAST_STORM_PROT_RATE 10
+
+/* 148,800 frames * 67 ms / 100 */
+#define BROADCAST_STORM_VALUE 9969
+
+/**
+ * STATIC_MAC_TABLE_ADDR 00-0000FFFF-FFFFFFFF
+ * STATIC_MAC_TABLE_FWD_PORTS 00-001F0000-00000000
+ * STATIC_MAC_TABLE_VALID 00-00200000-00000000
+ * STATIC_MAC_TABLE_OVERRIDE 00-00400000-00000000
+ * STATIC_MAC_TABLE_USE_FID 00-00800000-00000000
+ * STATIC_MAC_TABLE_FID 00-7F000000-00000000
+ */
+
+#define STATIC_MAC_TABLE_ADDR 0x0000FFFF
+#define STATIC_MAC_TABLE_FWD_PORTS 0x001F0000
+#define STATIC_MAC_TABLE_VALID 0x00200000
+#define STATIC_MAC_TABLE_OVERRIDE 0x00400000
+#define STATIC_MAC_TABLE_USE_FID 0x00800000
+#define STATIC_MAC_TABLE_FID 0x7F000000
+
+#define STATIC_MAC_FWD_PORTS_S 16
+#define STATIC_MAC_FID_S 24
+
+/**
+ * VLAN_TABLE_FID 00-007F007F-007F007F
+ * VLAN_TABLE_MEMBERSHIP 00-0F800F80-0F800F80
+ * VLAN_TABLE_VALID 00-10001000-10001000
+ */
+
+#define VLAN_TABLE_FID 0x007F
+#define VLAN_TABLE_MEMBERSHIP 0x0F80
+#define VLAN_TABLE_VALID 0x1000
+
+#define VLAN_TABLE_MEMBERSHIP_S 7
+#define VLAN_TABLE_S 16
+
+/**
+ * DYNAMIC_MAC_TABLE_ADDR 00-0000FFFF-FFFFFFFF
+ * DYNAMIC_MAC_TABLE_FID 00-007F0000-00000000
+ * DYNAMIC_MAC_TABLE_NOT_READY 00-00800000-00000000
+ * DYNAMIC_MAC_TABLE_SRC_PORT 00-07000000-00000000
+ * DYNAMIC_MAC_TABLE_TIMESTAMP 00-18000000-00000000
+ * DYNAMIC_MAC_TABLE_ENTRIES 7F-E0000000-00000000
+ * DYNAMIC_MAC_TABLE_MAC_EMPTY 80-00000000-00000000
+ */
+
+#define DYNAMIC_MAC_TABLE_ADDR 0x0000FFFF
+#define DYNAMIC_MAC_TABLE_FID 0x007F0000
+#define DYNAMIC_MAC_TABLE_SRC_PORT 0x07000000
+#define DYNAMIC_MAC_TABLE_TIMESTAMP 0x18000000
+#define DYNAMIC_MAC_TABLE_ENTRIES 0xE0000000
+
+#define DYNAMIC_MAC_TABLE_NOT_READY 0x80
+
+#define DYNAMIC_MAC_TABLE_ENTRIES_H 0x7F
+#define DYNAMIC_MAC_TABLE_MAC_EMPTY 0x80
+
+#define DYNAMIC_MAC_FID_S 16
+#define DYNAMIC_MAC_SRC_PORT_S 24
+#define DYNAMIC_MAC_TIMESTAMP_S 27
+#define DYNAMIC_MAC_ENTRIES_S 29
+#define DYNAMIC_MAC_ENTRIES_H_S 3
+
+/**
+ * MIB_COUNTER_VALUE 00-00000000-3FFFFFFF
+ * MIB_TOTAL_BYTES 00-0000000F-FFFFFFFF
+ * MIB_PACKET_DROPPED 00-00000000-0000FFFF
+ * MIB_COUNTER_VALID 00-00000020-00000000
+ * MIB_COUNTER_OVERFLOW 00-00000040-00000000
+ */
+
+#define MIB_COUNTER_OVERFLOW BIT(6)
+#define MIB_COUNTER_VALID BIT(5)
+
+#define MIB_COUNTER_VALUE 0x3FFFFFFF
+
+#define KS_MIB_TOTAL_RX_0 0x100
+#define KS_MIB_TOTAL_TX_0 0x101
+#define KS_MIB_PACKET_DROPPED_RX_0 0x102
+#define KS_MIB_PACKET_DROPPED_TX_0 0x103
+#define KS_MIB_TOTAL_RX_1 0x104
+#define KS_MIB_TOTAL_TX_1 0x105
+#define KS_MIB_PACKET_DROPPED_TX_1 0x106
+#define KS_MIB_PACKET_DROPPED_RX_1 0x107
+#define KS_MIB_TOTAL_RX_2 0x108
+#define KS_MIB_TOTAL_TX_2 0x109
+#define KS_MIB_PACKET_DROPPED_TX_2 0x10A
+#define KS_MIB_PACKET_DROPPED_RX_2 0x10B
+#define KS_MIB_TOTAL_RX_3 0x10C
+#define KS_MIB_TOTAL_TX_3 0x10D
+#define KS_MIB_PACKET_DROPPED_TX_3 0x10E
+#define KS_MIB_PACKET_DROPPED_RX_3 0x10F
+#define KS_MIB_TOTAL_RX_4 0x110
+#define KS_MIB_TOTAL_TX_4 0x111
+#define KS_MIB_PACKET_DROPPED_TX_4 0x112
+#define KS_MIB_PACKET_DROPPED_RX_4 0x113
+
+#define MIB_PACKET_DROPPED 0x0000FFFF
+
+#define MIB_TOTAL_BYTES_H 0x0000000F
+
+#define TAIL_TAG_OVERRIDE BIT(6)
+#define TAIL_TAG_LOOKUP BIT(7)
+
+#define VLAN_TABLE_ENTRIES (4096 / 4)
+#define FID_ENTRIES 128
+
+#endif
diff --git a/drivers/net/dsa/microchip/ksz8795_spi.c b/drivers/net/dsa/microchip/ksz8795_spi.c
new file mode 100644
index 000000000000..50aa0d24effb
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz8795_spi.c
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Microchip KSZ8795 series register access through SPI
+ *
+ * Copyright (C) 2017 Microchip Technology Inc.
+ * Tristram Ha <Tristram.Ha@microchip.com>
+ */
+
+#include <asm/unaligned.h>
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+
+#include "ksz_priv.h"
+#include "ksz_common.h"
+
+#define SPI_ADDR_SHIFT 12
+#define SPI_ADDR_ALIGN 3
+#define SPI_TURNAROUND_SHIFT 1
+
+KSZ_REGMAP_TABLE(ksz8795, 16, SPI_ADDR_SHIFT,
+ SPI_TURNAROUND_SHIFT, SPI_ADDR_ALIGN);
+
+static int ksz8795_spi_probe(struct spi_device *spi)
+{
+ struct ksz_device *dev;
+ int i, ret;
+
+ dev = ksz_switch_alloc(&spi->dev, spi);
+ if (!dev)
+ return -ENOMEM;
+
+ for (i = 0; i < ARRAY_SIZE(ksz8795_regmap_config); i++) {
+ dev->regmap[i] = devm_regmap_init_spi(spi,
+ &ksz8795_regmap_config
+ [i]);
+ if (IS_ERR(dev->regmap[i])) {
+ ret = PTR_ERR(dev->regmap[i]);
+ dev_err(&spi->dev,
+ "Failed to initialize regmap%i: %d\n",
+ ksz8795_regmap_config[i].val_bits, ret);
+ return ret;
+ }
+ }
+
+ if (spi->dev.platform_data)
+ dev->pdata = spi->dev.platform_data;
+
+ ret = ksz8795_switch_register(dev);
+
+ /* Main DSA driver may not be started yet. */
+ if (ret)
+ return ret;
+
+ spi_set_drvdata(spi, dev);
+
+ return 0;
+}
+
+static int ksz8795_spi_remove(struct spi_device *spi)
+{
+ struct ksz_device *dev = spi_get_drvdata(spi);
+
+ if (dev)
+ ksz_switch_remove(dev);
+
+ return 0;
+}
+
+static void ksz8795_spi_shutdown(struct spi_device *spi)
+{
+ struct ksz_device *dev = spi_get_drvdata(spi);
+
+ if (dev && dev->dev_ops->shutdown)
+ dev->dev_ops->shutdown(dev);
+}
+
+static const struct of_device_id ksz8795_dt_ids[] = {
+ { .compatible = "microchip,ksz8765" },
+ { .compatible = "microchip,ksz8794" },
+ { .compatible = "microchip,ksz8795" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ksz8795_dt_ids);
+
+static struct spi_driver ksz8795_spi_driver = {
+ .driver = {
+ .name = "ksz8795-switch",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(ksz8795_dt_ids),
+ },
+ .probe = ksz8795_spi_probe,
+ .remove = ksz8795_spi_remove,
+ .shutdown = ksz8795_spi_shutdown,
+};
+
+module_spi_driver(ksz8795_spi_driver);
+
+MODULE_AUTHOR("Tristram Ha <Tristram.Ha@microchip.com>");
+MODULE_DESCRIPTION("Microchip KSZ8795 Series Switch SPI Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index a3d2d67894bd..ce20cc90f9ef 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -373,7 +373,8 @@ int ksz_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy)
/* setup slave port */
dev->dev_ops->port_setup(dev, port, false);
- dev->dev_ops->phy_setup(dev, port, phy);
+ if (dev->dev_ops->phy_setup)
+ dev->dev_ops->phy_setup(dev, port, phy);
/* port_stp_state_set() will be called after to enable the port so
* there is no need to do anything.
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index ee7096d8af07..84fed4a2578b 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -68,6 +68,22 @@ static inline int ksz_read32(struct ksz_device *dev, u32 reg, u32 *val)
return ret;
}
+static inline int ksz_read64(struct ksz_device *dev, u32 reg, u64 *val)
+{
+ u32 value[2];
+ int ret;
+
+ ret = regmap_bulk_read(dev->regmap[2], reg, value, 2);
+ if (!ret) {
+ /* Ick! ToDo: Add 64bit R/W to regmap on 32bit systems */
+ value[0] = swab32(value[0]);
+ value[1] = swab32(value[1]);
+ *val = swab64((u64)*value);
+ }
+
+ return ret;
+}
+
static inline int ksz_write8(struct ksz_device *dev, u32 reg, u8 value)
{
return regmap_write(dev->regmap[0], reg, value);
@@ -83,6 +99,18 @@ static inline int ksz_write32(struct ksz_device *dev, u32 reg, u32 value)
return regmap_write(dev->regmap[2], reg, value);
}
+static inline int ksz_write64(struct ksz_device *dev, u32 reg, u64 value)
+{
+ u32 val[2];
+
+ /* Ick! ToDo: Add 64bit R/W to regmap on 32bit systems */
+ value = swab64(value);
+ val[0] = swab32(value & 0xffffffffULL);
+ val[1] = swab32(value >> 32ULL);
+
+ return regmap_bulk_write(dev->regmap[2], reg, val, 2);
+}
+
static inline void ksz_pread8(struct ksz_device *dev, int port, int offset,
u8 *data)
{
diff --git a/drivers/net/dsa/microchip/ksz_priv.h b/drivers/net/dsa/microchip/ksz_priv.h
index beacf0e40f42..44c16aaf775c 100644
--- a/drivers/net/dsa/microchip/ksz_priv.h
+++ b/drivers/net/dsa/microchip/ksz_priv.h
@@ -150,6 +150,7 @@ int ksz_switch_register(struct ksz_device *dev,
const struct ksz_dev_ops *ops);
void ksz_switch_remove(struct ksz_device *dev);
+int ksz8795_switch_register(struct ksz_device *dev);
int ksz9477_switch_register(struct ksz_device *dev);
#endif
--
2.20.1
^ permalink raw reply related
* [PATCH V4 2/3] net: dsa: ksz: Add KSZ8795 tag code
From: Marek Vasut @ 2019-07-29 17:49 UTC (permalink / raw)
To: netdev
Cc: Tristram Ha, Marek Vasut, Andrew Lunn, David S . Miller,
Florian Fainelli, Vivien Didelot, Woojung Huh
In-Reply-To: <20190729174947.10103-1-marex@denx.de>
From: Tristram Ha <Tristram.Ha@microchip.com>
Add DSA tag code for Microchip KSZ8795 switch. The switch is simpler
and the tag is only 1 byte, instead of 2 as is the case with KSZ9477.
Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: David S. Miller <davem@davemloft.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Woojung Huh <woojung.huh@microchip.com>
---
V2: No change
V3: No change
V4: Drop Kconfig entry
---
include/net/dsa.h | 2 ++
net/dsa/tag_ksz.c | 62 +++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 64 insertions(+)
diff --git a/include/net/dsa.h b/include/net/dsa.h
index 1e8650fa8acc..147b757ef8ea 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -41,6 +41,7 @@ struct phylink_link_state;
#define DSA_TAG_PROTO_TRAILER_VALUE 11
#define DSA_TAG_PROTO_8021Q_VALUE 12
#define DSA_TAG_PROTO_SJA1105_VALUE 13
+#define DSA_TAG_PROTO_KSZ8795_VALUE 14
enum dsa_tag_protocol {
DSA_TAG_PROTO_NONE = DSA_TAG_PROTO_NONE_VALUE,
@@ -57,6 +58,7 @@ enum dsa_tag_protocol {
DSA_TAG_PROTO_TRAILER = DSA_TAG_PROTO_TRAILER_VALUE,
DSA_TAG_PROTO_8021Q = DSA_TAG_PROTO_8021Q_VALUE,
DSA_TAG_PROTO_SJA1105 = DSA_TAG_PROTO_SJA1105_VALUE,
+ DSA_TAG_PROTO_KSZ8795 = DSA_TAG_PROTO_KSZ8795_VALUE,
};
struct packet_type;
diff --git a/net/dsa/tag_ksz.c b/net/dsa/tag_ksz.c
index adc6c1e03a4c..7af71db91c54 100644
--- a/net/dsa/tag_ksz.c
+++ b/net/dsa/tag_ksz.c
@@ -69,6 +69,67 @@ static struct sk_buff *ksz_common_rcv(struct sk_buff *skb,
return skb;
}
+/*
+ * For Ingress (Host -> KSZ8795), 1 byte is added before FCS.
+ * ---------------------------------------------------------------------------
+ * DA(6bytes)|SA(6bytes)|....|Data(nbytes)|tag(1byte)|FCS(4bytes)
+ * ---------------------------------------------------------------------------
+ * tag : each bit represents port (eg, 0x01=port1, 0x02=port2, 0x10=port5)
+ *
+ * For Egress (KSZ8795 -> Host), 1 byte is added before FCS.
+ * ---------------------------------------------------------------------------
+ * DA(6bytes)|SA(6bytes)|....|Data(nbytes)|tag0(1byte)|FCS(4bytes)
+ * ---------------------------------------------------------------------------
+ * tag0 : zero-based value represents port
+ * (eg, 0x00=port1, 0x02=port3, 0x06=port7)
+ */
+
+#define KSZ8795_INGRESS_TAG_LEN 1
+
+#define KSZ8795_TAIL_TAG_OVERRIDE BIT(6)
+#define KSZ8795_TAIL_TAG_LOOKUP BIT(7)
+
+static struct sk_buff *ksz8795_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct dsa_port *dp = dsa_slave_to_port(dev);
+ struct sk_buff *nskb;
+ u8 *tag;
+ u8 *addr;
+
+ nskb = ksz_common_xmit(skb, dev, KSZ8795_INGRESS_TAG_LEN);
+ if (!nskb)
+ return NULL;
+
+ /* Tag encoding */
+ tag = skb_put(nskb, KSZ8795_INGRESS_TAG_LEN);
+ addr = skb_mac_header(nskb);
+
+ *tag = 1 << dp->index;
+ if (is_link_local_ether_addr(addr))
+ *tag |= KSZ8795_TAIL_TAG_OVERRIDE;
+
+ return nskb;
+}
+
+static struct sk_buff *ksz8795_rcv(struct sk_buff *skb, struct net_device *dev,
+ struct packet_type *pt)
+{
+ u8 *tag = skb_tail_pointer(skb) - KSZ_EGRESS_TAG_LEN;
+
+ return ksz_common_rcv(skb, dev, tag[0] & 7, KSZ_EGRESS_TAG_LEN);
+}
+
+static const struct dsa_device_ops ksz8795_netdev_ops = {
+ .name = "ksz8795",
+ .proto = DSA_TAG_PROTO_KSZ8795,
+ .xmit = ksz8795_xmit,
+ .rcv = ksz8795_rcv,
+ .overhead = KSZ8795_INGRESS_TAG_LEN,
+};
+
+DSA_TAG_DRIVER(ksz8795_netdev_ops);
+MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_KSZ8795);
+
/*
* For Ingress (Host -> KSZ9477), 2 bytes are added before FCS.
* ---------------------------------------------------------------------------
@@ -183,6 +244,7 @@ DSA_TAG_DRIVER(ksz9893_netdev_ops);
MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_KSZ9893);
static struct dsa_tag_driver *dsa_tag_driver_array[] = {
+ &DSA_TAG_DRIVER_NAME(ksz8795_netdev_ops),
&DSA_TAG_DRIVER_NAME(ksz9477_netdev_ops),
&DSA_TAG_DRIVER_NAME(ksz9893_netdev_ops),
};
--
2.20.1
^ permalink raw reply related
* [PATCH V4 0/3] net: dsa: ksz: Add Microchip KSZ87xx support
From: Marek Vasut @ 2019-07-29 17:49 UTC (permalink / raw)
To: netdev
Cc: Marek Vasut, Andrew Lunn, David S . Miller, Florian Fainelli,
Tristram Ha, Vivien Didelot, Woojung Huh
This series adds support for Microchip KSZ87xx switches, which are
slightly simpler compared to KSZ9xxx .
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: David S. Miller <davem@davemloft.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Woojung Huh <woojung.huh@microchip.com>
Marek Vasut (1):
dt-bindings: net: dsa: ksz: document Microchip KSZ87xx family switches
Tristram Ha (2):
net: dsa: ksz: Add KSZ8795 tag code
net: dsa: ksz: Add Microchip KSZ8795 DSA driver
.../devicetree/bindings/net/dsa/ksz.txt | 3 +
drivers/net/dsa/microchip/Kconfig | 17 +
drivers/net/dsa/microchip/Makefile | 2 +
drivers/net/dsa/microchip/ksz8795.c | 1311 +++++++++++++++++
drivers/net/dsa/microchip/ksz8795_reg.h | 1004 +++++++++++++
drivers/net/dsa/microchip/ksz8795_spi.c | 104 ++
drivers/net/dsa/microchip/ksz_common.c | 3 +-
drivers/net/dsa/microchip/ksz_common.h | 28 +
drivers/net/dsa/microchip/ksz_priv.h | 1 +
include/net/dsa.h | 2 +
net/dsa/tag_ksz.c | 62 +
11 files changed, 2536 insertions(+), 1 deletion(-)
create mode 100644 drivers/net/dsa/microchip/ksz8795.c
create mode 100644 drivers/net/dsa/microchip/ksz8795_reg.h
create mode 100644 drivers/net/dsa/microchip/ksz8795_spi.c
--
2.20.1
^ permalink raw reply
* [PATCH V4 1/3] dt-bindings: net: dsa: ksz: document Microchip KSZ87xx family switches
From: Marek Vasut @ 2019-07-29 17:49 UTC (permalink / raw)
To: netdev
Cc: Marek Vasut, Andrew Lunn, David S . Miller, Florian Fainelli,
Rob Herring, Tristram Ha, Vivien Didelot, Woojung Huh, devicetree
In-Reply-To: <20190729174947.10103-1-marex@denx.de>
Document Microchip KSZ87xx family switches. These include
KSZ8765 - 5 port switch
KSZ8794 - 4 port switch
KSZ8795 - 5 port switch
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: David S. Miller <davem@davemloft.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Woojung Huh <woojung.huh@microchip.com>
Cc: devicetree@vger.kernel.org
---
V2: No change
V3: No change
V4: No change
---
Documentation/devicetree/bindings/net/dsa/ksz.txt | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt
index 4ac21cef370e..5e8429b6f9ca 100644
--- a/Documentation/devicetree/bindings/net/dsa/ksz.txt
+++ b/Documentation/devicetree/bindings/net/dsa/ksz.txt
@@ -5,6 +5,9 @@ Required properties:
- compatible: For external switch chips, compatible string must be exactly one
of the following:
+ - "microchip,ksz8765"
+ - "microchip,ksz8794"
+ - "microchip,ksz8795"
- "microchip,ksz9477"
- "microchip,ksz9897"
- "microchip,ksz9896"
--
2.20.1
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox