NVIDIA GPU driver infrastructure
 help / color / mirror / Atom feed
From: John Hubbard <jhubbard@nvidia.com>
To: Danilo Krummrich <dakr@kernel.org>,
	Alexandre Courbot <acourbot@nvidia.com>
Cc: "Timur Tabi" <ttabi@nvidia.com>,
	"Alistair Popple" <apopple@nvidia.com>,
	"Eliot Courtney" <ecourtney@nvidia.com>,
	"Zhi Wang" <zhiw@nvidia.com>, "David Airlie" <airlied@gmail.com>,
	"Simona Vetter" <simona@ffwll.ch>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Miguel Ojeda" <ojeda@kernel.org>,
	"Alex Gaynor" <alex.gaynor@gmail.com>,
	"Boqun Feng" <boqun.feng@gmail.com>,
	"Gary Guo" <gary@garyguo.net>,
	"Björn Roy Baron" <bjorn3_gh@protonmail.com>,
	"Benno Lossin" <lossin@kernel.org>,
	"Andreas Hindborg" <a.hindborg@kernel.org>,
	"Alice Ryhl" <aliceryhl@google.com>,
	"Trevor Gross" <tmgross@umich.edu>,
	nova-gpu@lists.linux.dev, LKML <linux-kernel@vger.kernel.org>,
	"John Hubbard" <jhubbard@nvidia.com>
Subject: [PATCH 21/27] gpu: nova-core: gsp: add the GMC boot event dispatcher
Date: Tue, 18 Aug 2026 20:52:14 -0700	[thread overview]
Message-ID: <20260819035221.336390-22-jhubbard@nvidia.com> (raw)
In-Reply-To: <20260819035221.336390-1-jhubbard@nvidia.com>

The r000 GSP boot protocol sends its two load-and-execute events as GMC
commands, each identified by a command id.

Nova-core has a handler for each of the two events, but nothing that
reads a command id and selects between them.

Add the dispatcher, keyed on the two command ids from the r000 bindings.

Assisted-by: Cursor:claude-opus-5
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
---
 drivers/gpu/nova-core/gsp/boot.rs | 62 +++++++++++++++++++++++++++++--
 drivers/gpu/nova-core/gsp/fw.rs   | 10 +++++
 2 files changed, 69 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/nova-core/gsp/boot.rs b/drivers/gpu/nova-core/gsp/boot.rs
index d62a5c834ccf..15933ecc061b 100644
--- a/drivers/gpu/nova-core/gsp/boot.rs
+++ b/drivers/gpu/nova-core/gsp/boot.rs
@@ -36,7 +36,11 @@
     },
     gsp::{
         cmdq::Cmdq,
-        commands, //
+        commands,
+        fw::{
+            GMCAPI_CMD_EXEC_GENERIC_BOOTLOADER,
+            GMCAPI_CMD_EXEC_HS_BINARY, //
+        }, //
     },
     regs, //
 };
@@ -162,6 +166,60 @@ fn core_resume(
         Ok(())
     }
 
+    /// Dispatch one GMC boot event to its load-and-execute handler.
+    ///
+    /// LIBOS2 chipsets send `GMCAPI_CMD_EXEC_GENERIC_BOOTLOADER` and LIBOS3 chipsets send
+    /// `GMCAPI_CMD_EXEC_HS_BINARY`, so a given GPU only ever reaches one of the two handlers.
+    ///
+    /// # Errors
+    ///
+    /// - `EINVAL` if `command_id` is not a load-and-execute command.
+    ///
+    /// Errors from the handlers are propagated as-is.
+    #[expect(dead_code)]
+    #[allow(clippy::too_many_arguments)]
+    fn dispatch_gmc_boot_event(
+        command_id: u32,
+        payload: &[u8],
+        bootloader: &GenericBootloader,
+        gsp_falcon: &Falcon<'_, Gsp>,
+        sec2_falcon: &Falcon<'_, Sec2>,
+        bar: Bar0<'_>,
+        dev: &device::Device,
+        bootloader_app_version: u32,
+        libos_dma_handle: u64,
+    ) -> Result {
+        match command_id {
+            GMCAPI_CMD_EXEC_GENERIC_BOOTLOADER => Self::handle_load_exec_bootloader(
+                payload,
+                bootloader,
+                gsp_falcon,
+                sec2_falcon,
+                bar,
+                dev,
+                bootloader_app_version,
+                libos_dma_handle,
+            ),
+            GMCAPI_CMD_EXEC_HS_BINARY => Self::handle_load_exec_hs_binary(
+                payload,
+                gsp_falcon,
+                sec2_falcon,
+                bar,
+                dev,
+                bootloader_app_version,
+                libos_dma_handle,
+            ),
+            _ => {
+                dev_err!(
+                    dev,
+                    "Unexpected GMC boot event: command_id={:#010x}\n",
+                    command_id
+                );
+                Err(EINVAL)
+            }
+        }
+    }
+
     /// Handle a `GSP_LOAD_EXEC_GENERIC_BOOTLOADER` event.
     ///
     /// The driver does not copy the image the GSP asks for. It writes the descriptor the event
@@ -175,7 +233,6 @@ fn core_resume(
     ///   size this driver mirrors, or the event names a context DMA slot or an aperture that does
     ///   not exist.
     /// - `ETIMEDOUT` if the GSP does not suspend, or the image does not halt, in time.
-    #[expect(dead_code)]
     #[allow(clippy::too_many_arguments)]
     fn handle_load_exec_bootloader(
         payload: &[u8],
@@ -268,7 +325,6 @@ fn handle_load_exec_bootloader(
     /// - `EINVAL` if the payload is shorter than the parameter block, or the ucode id does not
     ///   fit the BROM register field.
     /// - `ETIMEDOUT` if the GSP does not suspend, or the binary does not halt, in time.
-    #[expect(dead_code)]
     #[allow(clippy::too_many_arguments)]
     fn handle_load_exec_hs_binary(
         payload: &[u8],
diff --git a/drivers/gpu/nova-core/gsp/fw.rs b/drivers/gpu/nova-core/gsp/fw.rs
index 83f7d2042aa1..4772af362117 100644
--- a/drivers/gpu/nova-core/gsp/fw.rs
+++ b/drivers/gpu/nova-core/gsp/fw.rs
@@ -979,6 +979,16 @@ pub(crate) struct GmcApiHeader {
 /// `GMCAPI_HEADER_COMMAND_ID_MASK`. The remaining byte carries flags.
 const GMCAPI_COMMAND_ID_MASK: u32 = 0x00ff_ffff;
 
+/// GMC command asking the driver to run the generic falcon bootloader against a descriptor the
+/// GSP supplies.
+pub(crate) const GMCAPI_CMD_EXEC_GENERIC_BOOTLOADER: u32 =
+    r000_00::GMCAPI_COMMANDS_GMCAPI_CMD_EXEC_GENERIC_BOOTLOADER;
+
+/// GMC command asking the driver to run a high-security binary the GSP has placed in the
+/// framebuffer.
+pub(crate) const GMCAPI_CMD_EXEC_HS_BINARY: u32 =
+    r000_00::GMCAPI_COMMANDS_GMCAPI_CMD_EXEC_HS_BINARY;
+
 static_assert!(size_of::<GmcApiHeader>() == 40);
 
 impl GmcApiHeader {
-- 
2.55.0


  parent reply	other threads:[~2026-08-19  3:53 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-19  3:51 [PATCH 00/27] gpu: nova-core: boot on the r000 GSP firmware John Hubbard
2026-08-19  3:51 ` [PATCH 01/27] gpu: nova-core: firmware: add r000 bindings John Hubbard
2026-08-19  3:51 ` [PATCH 02/27] gpu: nova-core: extract radix3 page table into its own module John Hubbard
2026-08-19  3:51 ` [PATCH 03/27] gpu: nova-core: set MCTP transport header version to 1 John Hubbard
2026-08-19  3:51 ` [PATCH 04/27] gpu: nova-core: add Falcon helpers for r000 LOAD_EXEC events John Hubbard
2026-08-19  3:51 ` [PATCH 05/27] gpu: nova-core: zero-pad radix3 page table levels to page boundary John Hubbard
2026-08-19  3:51 ` [PATCH 06/27] gpu: nova-core: distinguish async GSP RPC traffic in debug logs John Hubbard
2026-08-19  3:52 ` [PATCH 07/27] gpu: nova-core: add optional ucodes firmware loading John Hubbard
2026-08-19  3:52 ` [PATCH 08/27] gpu: nova-core: add LIBOS3 log buffers and state monitor buffer John Hubbard
2026-08-19  3:52 ` [PATCH 09/27] gpu: nova-core: add build ID headers to debugfs log buffer dumps John Hubbard
2026-08-19  3:52 ` [PATCH 10/27] gpu: nova-core: rename the FbRanges elf field to fw_image John Hubbard
2026-08-19  3:52 ` [PATCH 11/27] gpu: nova-core: regs: add msgq v2 BAR0 register declarations John Hubbard
2026-08-19  3:52 ` [PATCH 12/27] gpu: nova-core: gsp: add msgq v2 internals John Hubbard
2026-08-19  3:52 ` [PATCH 13/27] gpu: nova-core: generalize allocate_command() for variable headers John Hubbard
2026-08-19  3:52 ` [PATCH 14/27] gpu: nova-core: add GMC API message types John Hubbard
2026-08-19  3:52 ` [PATCH 15/27] gpu: nova-core: add GMC send path John Hubbard
2026-08-19  3:52 ` [PATCH 16/27] gpu: nova-core: add GMC transport receive path John Hubbard
2026-08-19  3:52 ` [PATCH 17/27] gpu: nova-core: gsp: add GMC dispatch on receive John Hubbard
2026-08-19  3:52 ` [PATCH 18/27] gpu: nova-core: separate the generic falcon bootloader from FWSEC John Hubbard
2026-08-19  3:52 ` [PATCH 19/27] gpu: nova-core: handle the r000 load-and-execute HS binary event John Hubbard
2026-08-19  3:52 ` [PATCH 20/27] gpu: nova-core: handle the r000 load-and-execute bootloader event John Hubbard
2026-08-19  3:52 ` John Hubbard [this message]
2026-08-19  3:52 ` [PATCH 22/27] gpu: nova-core: gsp: add the GSP_INIT request builder John Hubbard
2026-08-19  3:52 ` [PATCH 23/27] gpu: nova-core: gsp: send GSP_INIT and decode its reply John Hubbard
2026-08-19  3:52 ` [PATCH 24/27] gpu: nova-core: gsp: pass the remaining log buffers to GSP-RM John Hubbard
2026-08-19  3:52 ` [PATCH 25/27] gpu: nova-core: switch to the r000 GSP firmware John Hubbard
2026-08-19  3:52 ` [PATCH 26/27] gpu: nova-core: gsp: remove the retired system-info and static-info RPCs John Hubbard
2026-08-19  3:52 ` [PATCH 27/27] gpu: nova-core: firmware: delete the r570 bindings John Hubbard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260819035221.336390-22-jhubbard@nvidia.com \
    --to=jhubbard@nvidia.com \
    --cc=a.hindborg@kernel.org \
    --cc=acourbot@nvidia.com \
    --cc=airlied@gmail.com \
    --cc=alex.gaynor@gmail.com \
    --cc=aliceryhl@google.com \
    --cc=apopple@nvidia.com \
    --cc=bhelgaas@google.com \
    --cc=bjorn3_gh@protonmail.com \
    --cc=boqun.feng@gmail.com \
    --cc=dakr@kernel.org \
    --cc=ecourtney@nvidia.com \
    --cc=gary@garyguo.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lossin@kernel.org \
    --cc=nova-gpu@lists.linux.dev \
    --cc=ojeda@kernel.org \
    --cc=simona@ffwll.ch \
    --cc=tmgross@umich.edu \
    --cc=ttabi@nvidia.com \
    --cc=zhiw@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox