From: John Hubbard <jhubbard@nvidia.com>
To: Danilo Krummrich <dakr@kernel.org>,
Alexandre Courbot <acourbot@nvidia.com>
Cc: "Timur Tabi" <ttabi@nvidia.com>,
"Alistair Popple" <apopple@nvidia.com>,
"Eliot Courtney" <ecourtney@nvidia.com>,
"Zhi Wang" <zhiw@nvidia.com>, "David Airlie" <airlied@gmail.com>,
"Simona Vetter" <simona@ffwll.ch>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Miguel Ojeda" <ojeda@kernel.org>,
"Alex Gaynor" <alex.gaynor@gmail.com>,
"Boqun Feng" <boqun.feng@gmail.com>,
"Gary Guo" <gary@garyguo.net>,
"Björn Roy Baron" <bjorn3_gh@protonmail.com>,
"Benno Lossin" <lossin@kernel.org>,
"Andreas Hindborg" <a.hindborg@kernel.org>,
"Alice Ryhl" <aliceryhl@google.com>,
"Trevor Gross" <tmgross@umich.edu>,
nova-gpu@lists.linux.dev, LKML <linux-kernel@vger.kernel.org>,
"John Hubbard" <jhubbard@nvidia.com>
Subject: [PATCH 26/27] gpu: nova-core: gsp: remove the retired system-info and static-info RPCs
Date: Tue, 18 Aug 2026 20:52:19 -0700 [thread overview]
Message-ID: <20260819035221.336390-27-jhubbard@nvidia.com> (raw)
In-Reply-To: <20260819035221.336390-1-jhubbard@nvidia.com>
The r000 boot path folds the system information and the static GPU
configuration into the GSP_INIT request, whose reply carries that
configuration back to the driver.
The set-system-info and get-static-info commands stayed behind after the
switch, unreachable and marked dead, along with the two payload
structures that encoded them.
Remove both commands and their payloads, and keep the decoded static
configuration that the GSP_INIT reply fills in. The two message-function
entries stay, because that table catalogs the wire protocol rather than
what the driver implements, and already names many functions nova-core
never sends.
Assisted-by: Cursor:claude-opus-5
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
---
drivers/gpu/nova-core/gsp.rs | 8 --
drivers/gpu/nova-core/gsp/commands.rs | 65 +------------
drivers/gpu/nova-core/gsp/fw/commands.rs | 115 +----------------------
3 files changed, 3 insertions(+), 185 deletions(-)
diff --git a/drivers/gpu/nova-core/gsp.rs b/drivers/gpu/nova-core/gsp.rs
index 8e912eaf8e2e..b128153fda86 100644
--- a/drivers/gpu/nova-core/gsp.rs
+++ b/drivers/gpu/nova-core/gsp.rs
@@ -407,14 +407,6 @@ pub(crate) fn new(
})
}
- /// Query the GSP for the static GPU information.
- ///
- /// The r000 boot path gets the same information from the `GSP_INIT` reply instead.
- #[expect(dead_code)]
- pub(crate) fn get_static_info(&self, bar: Bar0<'_>) -> Result<commands::GetGspStaticInfoReply> {
- self.cmdq.send_command(bar, commands::GetGspStaticInfo)
- }
-
/// Returns a shared handle to the GSP command queue.
pub(crate) fn cmdq(&self) -> Arc<Cmdq> {
self.cmdq.clone()
diff --git a/drivers/gpu/nova-core/gsp/commands.rs b/drivers/gpu/nova-core/gsp/commands.rs
index 26ea07dc4a28..9079393da0b3 100644
--- a/drivers/gpu/nova-core/gsp/commands.rs
+++ b/drivers/gpu/nova-core/gsp/commands.rs
@@ -49,34 +49,6 @@
vgpu::VgpuState, //
};
-/// The `GspSetSystemInfo` command.
-///
-/// The r000 boot path folds this into the `GSP_INIT` payload instead.
-pub(crate) struct SetSystemInfo<'a> {
- pdev: &'a pci::Device<device::Bound>,
- chipset: Chipset,
-}
-
-#[expect(dead_code)]
-impl<'a> SetSystemInfo<'a> {
- /// Creates a new `GspSetSystemInfo` command using the parameters of `pdev`.
- pub(crate) fn new(pdev: &'a pci::Device<device::Bound>, chipset: Chipset) -> Self {
- Self { pdev, chipset }
- }
-}
-
-impl<'a> CommandToGsp for SetSystemInfo<'a> {
- const FUNCTION: MsgFunction = MsgFunction::GspSetSystemInfo;
- const IS_ASYNC: bool = true;
- type Command = fw::commands::GspSetSystemInfo;
- type Reply = NoReply;
- type InitError = Error;
-
- fn init(&self) -> impl Init<Self::Command, Self::InitError> {
- Self::Command::init(self.pdev, self.chipset)
- }
-}
-
struct RegistryEntry {
key: &'static str,
value: u32,
@@ -186,48 +158,13 @@ fn init_variable_payload(
}
}
-/// The `GetGspStaticInfo` command.
-pub(crate) struct GetGspStaticInfo;
-
-impl CommandToGsp for GetGspStaticInfo {
- const FUNCTION: MsgFunction = MsgFunction::GetGspStaticInfo;
- type Command = fw::commands::GspStaticConfigInfo;
- type Reply = GetGspStaticInfoReply;
- type InitError = Infallible;
-
- fn init(&self) -> impl Init<Self::Command, Self::InitError> {
- Self::Command::init_zeroed()
- }
-}
-
-/// The reply from the GSP to the [`GetGspStaticInfo`] command.
+/// The static GPU configuration, as decoded from the `GSP_INIT` reply.
pub(crate) struct GetGspStaticInfoReply {
gpu_name: [u8; 64],
/// Usable FB (VRAM) regions for driver memory allocation.
pub(crate) usable_fb_regions: KVec<Range<u64>>,
}
-impl MessageFromGsp for GetGspStaticInfoReply {
- const FUNCTION: MsgFunction = MsgFunction::GetGspStaticInfo;
- type Message = fw::commands::GspStaticConfigInfo;
- type InitError = Error;
-
- fn read(
- msg: &Self::Message,
- _sbuffer: &mut SBufferIter<array::IntoIter<&[u8], 2>>,
- ) -> Result<Self, Self::InitError> {
- let mut usable_fb_regions = KVec::new();
- for region in msg.usable_fb_regions() {
- usable_fb_regions.push(region, GFP_KERNEL)?;
- }
-
- Ok(GetGspStaticInfoReply {
- gpu_name: msg.gpu_name_str(),
- usable_fb_regions,
- })
- }
-}
-
/// Error type for [`GetGspStaticInfoReply::gpu_name`].
#[derive(Debug)]
pub(crate) enum GpuNameError {
diff --git a/drivers/gpu/nova-core/gsp/fw/commands.rs b/drivers/gpu/nova-core/gsp/fw/commands.rs
index 00e40a435053..e49234f35d0f 100644
--- a/drivers/gpu/nova-core/gsp/fw/commands.rs
+++ b/drivers/gpu/nova-core/gsp/fw/commands.rs
@@ -14,11 +14,7 @@
}, //
};
-use crate::{
- gpu::Chipset,
- gsp::GSP_PAGE_SIZE,
- num::IntoSafeCast, //
-};
+use crate::gpu::Chipset;
use crate::gsp::nvkv::{
nvkv_decode,
@@ -37,56 +33,6 @@
use super::bindings;
-/// Payload of the `GspSetSystemInfo` command.
-#[repr(transparent)]
-pub(crate) struct GspSetSystemInfo {
- inner: bindings::GspSystemInfo,
-}
-static_assert!(size_of::<GspSetSystemInfo>() < GSP_PAGE_SIZE);
-
-impl GspSetSystemInfo {
- /// Returns an in-place initializer for the `GspSetSystemInfo` command.
- pub(crate) fn init<'a>(
- dev: &'a pci::Device<device::Bound>,
- chipset: Chipset,
- ) -> impl Init<Self, Error> + 'a {
- type InnerGspSystemInfo = bindings::GspSystemInfo;
- let pci_config_mirror_range = chipset.pci_config_mirror_range();
- let init_inner = try_init!(InnerGspSystemInfo {
- gpuPhysAddr: dev.resource_start(0)?,
- gpuPhysFbAddr: dev.resource_start(1)?,
- gpuPhysInstAddr: dev.resource_start(3)?,
- nvDomainBusDeviceFunc: u64::from(dev.dev_id()),
-
- // Using TASK_SIZE in r535_gsp_rpc_set_system_info() seems wrong because
- // TASK_SIZE is per-task. That's probably a design issue in GSP-RM though.
- maxUserVa: (1 << 47) - 4096,
- pciConfigMirrorBase: pci_config_mirror_range.start,
- pciConfigMirrorSize: pci_config_mirror_range.end - pci_config_mirror_range.start,
-
- PCIDeviceID: (u32::from(dev.device_id()) << 16) | u32::from(dev.vendor_id().as_raw()),
- PCISubDeviceID: (u32::from(dev.subsystem_device_id()) << 16)
- | u32::from(dev.subsystem_vendor_id()),
- PCIRevisionID: u32::from(dev.revision_id()),
- bIsPrimary: 0,
- bPreserveVideoMemoryAllocations: 0,
- ..Zeroable::init_zeroed()
- });
-
- try_init!(GspSetSystemInfo {
- inner <- init_inner,
- })
- }
-}
-
-// SAFETY: These structs don't meet the no-padding requirements of AsBytes but
-// that is not a problem because they are not used outside the kernel.
-unsafe impl AsBytes for GspSetSystemInfo {}
-
-// SAFETY: These structs don't meet the no-padding requirements of FromBytes but
-// that is not a problem because they are not used outside the kernel.
-unsafe impl FromBytes for GspSetSystemInfo {}
-
#[repr(transparent)]
pub(crate) struct PackedRegistryEntry(bindings::PACKED_REGISTRY_ENTRY);
@@ -136,60 +82,6 @@ unsafe impl AsBytes for PackedRegistryTable {}
// are valid.
unsafe impl FromBytes for PackedRegistryTable {}
-/// Payload of the `GetGspStaticInfo` command and message.
-#[repr(transparent)]
-#[derive(Zeroable)]
-pub(crate) struct GspStaticConfigInfo(bindings::GspStaticConfigInfo_t);
-
-impl GspStaticConfigInfo {
- /// Returns a bytes array containing the (hopefully) zero-terminated name of this GPU.
- pub(crate) fn gpu_name_str(&self) -> [u8; 64] {
- self.0.gpuNameString
- }
-
- /// Returns an iterator over valid FB regions from GSP firmware data.
- fn fb_regions(
- &self,
- ) -> impl Iterator<Item = &bindings::NV2080_CTRL_CMD_FB_GET_FB_REGION_FB_REGION_INFO> {
- let fb_info = &self.0.fbRegionInfoParams;
- fb_info
- .fbRegion
- .iter()
- .take(fb_info.numFBRegions.into_safe_cast())
- .filter(|reg| reg.limit >= reg.base)
- }
-
- /// Iterates over usable FB regions from GSP firmware data.
- ///
- /// Each yielded region is a [`Range<u64>`] suitable for driver memory allocation.
- /// Usable regions are those that satisfy all the following properties:
- /// - Are not reserved for firmware internal use.
- /// - Are not protected (hardware-enforced access restrictions).
- /// - Support compression (can use GPU memory compression for bandwidth).
- /// - Support ISO (isochronous memory for display requiring guaranteed bandwidth).
- pub(crate) fn usable_fb_regions(&self) -> impl Iterator<Item = Range<u64>> + '_ {
- self.fb_regions().filter_map(|reg| {
- // Filter: not reserved, not protected, supports compression and ISO.
- if reg.reserved == 0
- && reg.bProtected == 0
- && reg.supportCompressed != 0
- && reg.supportISO != 0
- {
- reg.limit.checked_add(1).map(|end| reg.base..end)
- } else {
- None
- }
- })
- }
-}
-
-// SAFETY: Padding is explicit and will not contain uninitialized data.
-unsafe impl AsBytes for GspStaticConfigInfo {}
-
-// SAFETY: This struct only contains integer types for which all bit patterns
-// are valid.
-unsafe impl FromBytes for GspStaticConfigInfo {}
-
/// Power level requested to the [`UnloadingGuestDriver`] command.
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
#[repr(u32)]
@@ -369,8 +261,6 @@ impl GspInitRequest {
const NV_DOMAIN_BUS_DEVICE_FUNC_KEY: KeyId = 0x1020;
/// Describes `dev` to GSP-RM and asks it to apply `regkeys`.
- ///
- /// The same identifiers reach GSP-RM through [`GspSetSystemInfo::init`] on the RPC path.
pub(crate) fn new(
dev: &pci::Device<device::Bound>,
chipset: Chipset,
@@ -442,8 +332,7 @@ pub(crate) fn gpu_name(&self) -> &[u8] {
/// Iterates over the FB regions the driver may allocate from.
///
/// A region qualifies when it is untagged, unprotected, and supports both compression and
- /// isochronous access, which is the same set the RPC path selects from
- /// [`GspStaticConfigInfo::usable_fb_regions`].
+ /// isochronous access.
pub(crate) fn usable_fb_regions(&self) -> impl Iterator<Item = Range<u64>> + '_ {
self.fb_regions.iter().filter_map(|region| {
if region.limit >= region.base
--
2.55.0
next prev parent reply other threads:[~2026-08-19 3:53 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-19 3:51 [PATCH 00/27] gpu: nova-core: boot on the r000 GSP firmware John Hubbard
2026-08-19 3:51 ` [PATCH 01/27] gpu: nova-core: firmware: add r000 bindings John Hubbard
2026-08-19 3:51 ` [PATCH 02/27] gpu: nova-core: extract radix3 page table into its own module John Hubbard
2026-08-19 3:51 ` [PATCH 03/27] gpu: nova-core: set MCTP transport header version to 1 John Hubbard
2026-08-19 3:51 ` [PATCH 04/27] gpu: nova-core: add Falcon helpers for r000 LOAD_EXEC events John Hubbard
2026-08-19 3:51 ` [PATCH 05/27] gpu: nova-core: zero-pad radix3 page table levels to page boundary John Hubbard
2026-08-19 3:51 ` [PATCH 06/27] gpu: nova-core: distinguish async GSP RPC traffic in debug logs John Hubbard
2026-08-19 3:52 ` [PATCH 07/27] gpu: nova-core: add optional ucodes firmware loading John Hubbard
2026-08-19 3:52 ` [PATCH 08/27] gpu: nova-core: add LIBOS3 log buffers and state monitor buffer John Hubbard
2026-08-19 3:52 ` [PATCH 09/27] gpu: nova-core: add build ID headers to debugfs log buffer dumps John Hubbard
2026-08-19 3:52 ` [PATCH 10/27] gpu: nova-core: rename the FbRanges elf field to fw_image John Hubbard
2026-08-19 3:52 ` [PATCH 11/27] gpu: nova-core: regs: add msgq v2 BAR0 register declarations John Hubbard
2026-08-19 3:52 ` [PATCH 12/27] gpu: nova-core: gsp: add msgq v2 internals John Hubbard
2026-08-19 3:52 ` [PATCH 13/27] gpu: nova-core: generalize allocate_command() for variable headers John Hubbard
2026-08-19 3:52 ` [PATCH 14/27] gpu: nova-core: add GMC API message types John Hubbard
2026-08-19 3:52 ` [PATCH 15/27] gpu: nova-core: add GMC send path John Hubbard
2026-08-19 3:52 ` [PATCH 16/27] gpu: nova-core: add GMC transport receive path John Hubbard
2026-08-19 3:52 ` [PATCH 17/27] gpu: nova-core: gsp: add GMC dispatch on receive John Hubbard
2026-08-19 3:52 ` [PATCH 18/27] gpu: nova-core: separate the generic falcon bootloader from FWSEC John Hubbard
2026-08-19 3:52 ` [PATCH 19/27] gpu: nova-core: handle the r000 load-and-execute HS binary event John Hubbard
2026-08-19 3:52 ` [PATCH 20/27] gpu: nova-core: handle the r000 load-and-execute bootloader event John Hubbard
2026-08-19 3:52 ` [PATCH 21/27] gpu: nova-core: gsp: add the GMC boot event dispatcher John Hubbard
2026-08-19 3:52 ` [PATCH 22/27] gpu: nova-core: gsp: add the GSP_INIT request builder John Hubbard
2026-08-19 3:52 ` [PATCH 23/27] gpu: nova-core: gsp: send GSP_INIT and decode its reply John Hubbard
2026-08-19 3:52 ` [PATCH 24/27] gpu: nova-core: gsp: pass the remaining log buffers to GSP-RM John Hubbard
2026-08-19 3:52 ` [PATCH 25/27] gpu: nova-core: switch to the r000 GSP firmware John Hubbard
2026-08-19 3:52 ` John Hubbard [this message]
2026-08-19 3:52 ` [PATCH 27/27] gpu: nova-core: firmware: delete the r570 bindings John Hubbard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260819035221.336390-27-jhubbard@nvidia.com \
--to=jhubbard@nvidia.com \
--cc=a.hindborg@kernel.org \
--cc=acourbot@nvidia.com \
--cc=airlied@gmail.com \
--cc=alex.gaynor@gmail.com \
--cc=aliceryhl@google.com \
--cc=apopple@nvidia.com \
--cc=bhelgaas@google.com \
--cc=bjorn3_gh@protonmail.com \
--cc=boqun.feng@gmail.com \
--cc=dakr@kernel.org \
--cc=ecourtney@nvidia.com \
--cc=gary@garyguo.net \
--cc=linux-kernel@vger.kernel.org \
--cc=lossin@kernel.org \
--cc=nova-gpu@lists.linux.dev \
--cc=ojeda@kernel.org \
--cc=simona@ffwll.ch \
--cc=tmgross@umich.edu \
--cc=ttabi@nvidia.com \
--cc=zhiw@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox