From: Xue jiufei <xuejiufei@huawei.com>
To: ocfs2-devel@oss.oracle.com
Subject: [Ocfs2-devel] [PATCH] ocfs2: do not set OCFS2_LOCK_UPCONVERT_FINISHING if nonblocking lock can not be granted at once
Date: Fri, 7 Nov 2014 14:36:02 +0800 [thread overview]
Message-ID: <545C6852.5020305@huawei.com> (raw)
In-Reply-To: <545C5E91.5000501@oracle.com>
Hi Junxiao
On 2014/11/7 13:54, Junxiao Bi wrote:
> Hi Jiufei,
>
> On 11/07/2014 11:41 AM, Xue jiufei wrote:
>> Function ocfs2_readpages() use nonblocking flag to avoid page lock
>> inversion. It will trigger cluster hang because that flag
>> OCFS2_LOCK_UPCONVERT_FINISHING is not cleared if nonblocking lock
>> cannot be granted at once. The flag would prevent dc thread from
>> downconverting. So other nodes cannot acheive this lockres for ever.
>>
>> So we should not set OCFS2_LOCK_UPCONVERT_FINISHING when receiving ast
>> if nonblocking lock had already returned.
>>
>
> Use OCFS2_LOCK_NONBLOCK_FINISHED can't fix this issue. Like there are
> two processes doing non-blocking lock in the following order.
I am wondering why these two processes can lock in such order.
> 1. Process A issue non-blocking lock fail, set OCFS2_LOCK_NONBLOCK_FINISHED.
We had set OCFS2_LOCK_BUSY flag before process A call ocfs2_dlm_lock(),
> 2. Process B issue non-blocking lock fail, set
> OCFS2_LOCK_NONBLOCK_FINISHED again.
So process B must wait until ast for Process A returns and clear OCFS2_LOCK_BUSY.
> 3. Ast for process A come, clear OCFS2_LOCK_NONBLOCK_FINISHED.
> 4. Ast for process B come, set OCFS2_LOCK_UPCONVERT_FINISHING.
>
> So down convert can still be blocked.
>
> To fix this issue, I think no need to call ocfs2_dlm_lock() for
> non-blocking lock, just check local lockres->l_level is enough, if
> request level equal or smaller than it, lock success, or lock fail.
>
> Thanks,
> Junxiao.
>
Thanks,
jiufei.
>> Signed-off-by: joyce.xue <xuejiufei@huawei.com>
>> ---
>> fs/ocfs2/dlmglue.c | 37 +++++++++++++++++++++++++++++++------
>> fs/ocfs2/ocfs2.h | 6 ++++++
>> 2 files changed, 37 insertions(+), 6 deletions(-)
>>
>> diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c
>> index 21262f2..1ddb6f1 100644
>> --- a/fs/ocfs2/dlmglue.c
>> +++ b/fs/ocfs2/dlmglue.c
>> @@ -861,8 +861,13 @@ static inline void ocfs2_generic_handle_convert_action(struct ocfs2_lock_res *lo
>> * We set the OCFS2_LOCK_UPCONVERT_FINISHING flag before clearing
>> * the OCFS2_LOCK_BUSY flag to prevent the dc thread from
>> * downconverting the lock before the upconvert has fully completed.
>> + * Do not prevent the dc thread from downconverting if NONBLOCK lock
>> + * had already returned.
>> */
>> - lockres_or_flags(lockres, OCFS2_LOCK_UPCONVERT_FINISHING);
>> + if (!(lockres->l_flags & OCFS2_LOCK_NONBLOCK_FINISHED))
>> + lockres_or_flags(lockres, OCFS2_LOCK_UPCONVERT_FINISHING);
>> + else
>> + lockres_clear_flags(lockres, OCFS2_LOCK_NONBLOCK_FINISHED);
>>
>> lockres_clear_flags(lockres, OCFS2_LOCK_BUSY);
>> }
>> @@ -1324,13 +1329,12 @@ static void lockres_add_mask_waiter(struct ocfs2_lock_res *lockres,
>>
>> /* returns 0 if the mw that was removed was already satisfied, -EBUSY
>> * if the mask still hadn't reached its goal */
>> -static int lockres_remove_mask_waiter(struct ocfs2_lock_res *lockres,
>> +static int __lockres_remove_mask_waiter(struct ocfs2_lock_res *lockres,
>> struct ocfs2_mask_waiter *mw)
>> {
>> - unsigned long flags;
>> int ret = 0;
>>
>> - spin_lock_irqsave(&lockres->l_lock, flags);
>> + assert_spin_locked(&lockres->l_lock);
>> if (!list_empty(&mw->mw_item)) {
>> if ((lockres->l_flags & mw->mw_mask) != mw->mw_goal)
>> ret = -EBUSY;
>> @@ -1338,6 +1342,18 @@ static int lockres_remove_mask_waiter(struct ocfs2_lock_res *lockres,
>> list_del_init(&mw->mw_item);
>> init_completion(&mw->mw_complete);
>> }
>> +
>> + return ret;
>> +}
>> +
>> +static int lockres_remove_mask_waiter(struct ocfs2_lock_res *lockres,
>> + struct ocfs2_mask_waiter *mw)
>> +{
>> + unsigned long flags;
>> + int ret = 0;
>> +
>> + spin_lock_irqsave(&lockres->l_lock, flags);
>> + ret = __lockres_remove_mask_waiter(lockres, mw);
>> spin_unlock_irqrestore(&lockres->l_lock, flags);
>>
>> return ret;
>> @@ -1373,6 +1389,7 @@ static int __ocfs2_cluster_lock(struct ocfs2_super *osb,
>> unsigned long flags;
>> unsigned int gen;
>> int noqueue_attempted = 0;
>> + int dlm_locked = 0;
>>
>> ocfs2_init_mask_waiter(&mw);
>>
>> @@ -1481,6 +1498,7 @@ again:
>> ocfs2_recover_from_dlm_error(lockres, 1);
>> goto out;
>> }
>> + dlm_locked = 1;
>>
>> mlog(0, "lock %s, successful return from ocfs2_dlm_lock\n",
>> lockres->l_name);
>> @@ -1514,10 +1532,17 @@ out:
>> if (wait && arg_flags & OCFS2_LOCK_NONBLOCK &&
>> mw.mw_mask & (OCFS2_LOCK_BUSY|OCFS2_LOCK_BLOCKED)) {
>> wait = 0;
>> - if (lockres_remove_mask_waiter(lockres, &mw))
>> + spin_lock_irqsave(&lockres->l_lock, flags);
>> + if (__lockres_remove_mask_waiter(lockres, &mw)) {
>> + if (dlm_locked)
>> + lockres_or_flags(lockres,
>> + OCFS2_LOCK_NONBLOCK_FINISHED);
>> + spin_unlock_irqrestore(&lockres->l_lock, flags);
>> ret = -EAGAIN;
>> - else
>> + } else {
>> + spin_unlock_irqrestore(&lockres->l_lock, flags);
>> goto again;
>> + }
>> }
>> if (wait) {
>> ret = ocfs2_wait_for_mask(&mw);
>> diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h
>> index bbec539..7d6b7d0 100644
>> --- a/fs/ocfs2/ocfs2.h
>> +++ b/fs/ocfs2/ocfs2.h
>> @@ -144,6 +144,12 @@ enum ocfs2_unlock_action {
>> * before the upconvert
>> * has completed */
>>
>> +#define OCFS2_LOCK_NONBLOCK_FINISHED (0x00001000) /* NONBLOCK cluster
>> + * lock has already
>> + * returned, do not block
>> + * dc thread from
>> + * downconverting */
>> +
>> struct ocfs2_lock_res_ops;
>>
>> typedef void (*ocfs2_lock_callback)(int status, unsigned long data);
>>
>
> .
>
next prev parent reply other threads:[~2014-11-07 6:36 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-07 3:41 [Ocfs2-devel] [PATCH] ocfs2: do not set OCFS2_LOCK_UPCONVERT_FINISHING if nonblocking lock can not be granted at once Xue jiufei
2014-11-07 5:54 ` Junxiao Bi
2014-11-07 6:36 ` Xue jiufei [this message]
2014-11-07 7:03 ` Junxiao Bi
2014-11-07 9:27 ` Xue jiufei
2014-11-10 1:52 ` Junxiao Bi
2014-11-11 1:41 ` Xue jiufei
2014-11-11 3:59 ` Junxiao Bi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=545C6852.5020305@huawei.com \
--to=xuejiufei@huawei.com \
--cc=ocfs2-devel@oss.oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox