Re: Ublox Toby Modem

[Dragos Tatulea <dragos@endocode.com>]

[-- Attachment #1: Type: text/plain, Size: 2480 bytes --]

Hi Yarn,

On 04/20/2016 07:54 PM, Yorn wrote:
> Hi Dragos,
> 
> logs + comments inline
> 
> Am 20.04.2016 um 17:01 schrieb Dragos Tatulea:
>> Hi Yorn,
>>
>> On 04/20/2016 04:24 PM, Yorn wrote:
>>> Hi Dragos,
>>>
>>> it is still active=0 :(
>>>
>>> root(a)colibri-vf:~/test# ./list-contexts
>>> [ /ublox_0 ]
>>>      [ /ublox_0/context1 ]
>>>          Username =
>>>          AuthenticationMethod = chap
>>>          Protocol = ip
>>>          Name = Internet
>>>          Settings = { }
>>>          IPv6.Settings = { }
>>>          Active = 0
>>>          AccessPointName =
>>>          Password =
>>>          Type = internet
>>>
>> Can you run only oFono (no connman) with OFONO_AT_DEBUG env variable set
>> and run the following scripts:
>>
>> enable-modem
>> online-modem
>> activate-context
>>
>> Then send the logs.
> Here they are [1]
> 
> I set the context information now as follows:
> root(a)colibri-vf:~/test# ./list-contexts
> [ /ublox_0 ]
>     [ /ublox_0/context1 ]
>         Username = eplus
>         AuthenticationMethod = chap
>         Protocol = ip
>         Name = Internet
>         Settings = { }
>         IPv6.Settings = { }
>         Active = 0
>         AccessPointName = m2m.tele2.com
>         Password =
>         Type = internet
> 
> 
Okay. That's good for the next step.

> I would expect AT Commands like this, however, I am not a modem AT command expert, so this is more or less taken from a tutorial (which set up my manual environment successfully)
> 
> AT+COPS?
> AT+CGDCONT=1,"IP","m2m.tele2.com"
> ATD*99***1#
> AT+CGACT=1,1
It never gets to do a context activation because the modem is not gprs
attached (see Attached state). The reason for that seems to be the
RoamingAllowed property not being set to true/1. Try to set  it to true
(set-roaming-allowed) and try again.

> AT+CGDATA="PPP",1
> CONNECT ""
> 

Also, Toby doesn't use PPP in high throughput mode. It uses an ndis
interface (you should see a usbX interface popping up when inserting
the powered up modem on usb).

Thanks
-- 
Dragos Tatulea
Software Developer @ Endocode AG
dragos(a)endocode.com

Endocode AG, Brückenstraße 5A, 10179 Berlin
+49 30 1206 4472 | info(a)endocode.com | www.endocode.com

Vorstandsvorsitzender: Mirko Boehm
Vorstände: Dr. Thomas Fricke, Sebastian Sucker
Aufsichtsratsvorsitzende: Alexandra Boehm

Registergericht: Amtsgericht Charlottenburg - HRB 150748 B