From: Dragos Tatulea <dragos@endocode.com>
To: ofono@ofono.org
Subject: Re: Ublox Toby Modem
Date: Fri, 22 Apr 2016 17:36:00 +0200 [thread overview]
Message-ID: <571A44E0.6040201@endocode.com> (raw)
In-Reply-To: <571A1047.4040507@gmx.net>
[-- Attachment #1: Type: text/plain, Size: 4228 bytes --]
Hi Yorn,
On 04/22/2016 01:51 PM, Yorn wrote:
> Hi Dragos,
>
> many thanks for all the effort! Comments inline:
>
> Am 22.04.2016 um 12:23 schrieb Dragos Tatulea:
>> Hi Yorn,
>>
>> On 04/21/2016 08:37 PM, Yorn wrote:
>>> Hi Dragos
>>>
>>> Am 21.04.2016 um 11:03 schrieb Dragos Tatulea:
>>>> Hi Yarn,
>>>>
>>>> On 04/20/2016 07:54 PM, Yorn wrote:
>>>>> Hi Dragos,
>>>>>
>>>>> logs + comments inline
>>>>>
>>>>> Am 20.04.2016 um 17:01 schrieb Dragos Tatulea:
>>>>>> Hi Yorn,
>>>>>>
>>>>>> On 04/20/2016 04:24 PM, Yorn wrote:
>>>>>>> Hi Dragos,
>>>>>>>
>>>>>>> it is still active=0 :(
>>>>>>>
>>>>>>> root(a)colibri-vf:~/test# ./list-contexts
>>>>>>> [ /ublox_0 ]
>>>>>>> [ /ublox_0/context1 ]
>>>>>>> Username =
>>>>>>> AuthenticationMethod = chap
>>>>>>> Protocol = ip
>>>>>>> Name = Internet
>>>>>>> Settings = { }
>>>>>>> IPv6.Settings = { }
>>>>>>> Active = 0
>>>>>>> AccessPointName =
>>>>>>> Password =
>>>>>>> Type = internet
>>>>>>>
>>>>>> Can you run only oFono (no connman) with OFONO_AT_DEBUG env variable set
>>>>>> and run the following scripts:
>>>>>>
>>>>>> enable-modem
>>>>>> online-modem
>>>>>> activate-context
>>>>>>
>>>>>> Then send the logs.
>>>>> Here they are [1]
>>> I am actually a bit lost in the ublox AT Commands manual..
>>>
>>> Do you have a chance to see something at the ofonod+AT logs with your expertice!?
>>>
>> oFono was able to register on the network an activate the context. This
>> part is interesting for you:
>>
>> ofonod[369]: drivers/ubloxmodem/gprs-context.c:ublox_gprs_activate_primary() cid 1
>> ofonod[369]: Aux: > AT\r
>> ofonod[369]: Aux: < \r\nOK\r\n
>> ofonod[369]: Aux: Finally woke up the modem
>> ofonod[369]: Aux: > AT+CGDCONT=1,"IP","m2m.tele2.com"\r
>> *> context defined
>>
>> ofonod[369]: Aux: < \r\nOK\r\n
>> ofonod[369]: drivers/ubloxmodem/gprs-context.c:cgdcont_cb() ok 1
>> ofonod[369]: Aux: > AT+CGACT=1,1\r
>> *> context activated
>>
>> ofonod[369]: Aux: < \r\nOK\r\n
>> ofonod[369]: drivers/ubloxmodem/gprs-context.c:cgact_enable_cb() ok 1
>> ofonod[369]: Aux: > AT+CGCONTRDP=1\r
>> ofonod[369]: Aux: < \r\n+CREG: 5,"0000","00000010",4\r\n\r\n+CGEV: ME PDN ACT 1\r\n
>> ofonod[369]: src/network.c:ofono_netreg_status_notify() /ublox_0 status 5 tech 4
>> ofonod[369]: src/gprs.c:netreg_status_changed() 5
>> ofonod[369]: src/gprs.c:gprs_netreg_update() attach: 1, driver_attached: 1
>> ofonod[369]: Aux: < \r\n+CGCONTRDP: 1,0,"m2m.tele2.com","
>> ofonod[369]: Aux: < 100.98.55.207.255.255.255.255","100.98.55.207","130.244.127.161","130.244.127.169","0.0.0.0","0.0.0.0",0\r\n
>> ofonod[369]: Aux: < \r\nOK\r\n
>> *> connection properties read successfully
>>
>> ofonod[369]: drivers/ubloxmodem/gprs-context.c:cgcontrdp_cb() ok 1
>> ofonod[369]: src/modem.c:get_modem_property() modem 0x192a900 property NetworkInterface
>>
>>> The connman cellular service is set to "a" (association) from starting
>>> connect cellular_240075810199181_context1
>>> up until timeout.
>>>
>> Do you still run the oFono scripts? From the logs it looks like connman
>> is trying to activate an already active context.
> The technologie and the service is running, but the association does not end successfully. Do I need to set something else in connman? Where do I have to look?
>
> The try to connect ends up with:
> Error /net/connman/service/cellular_240075810199181_context1: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
>
Can you send the connman logs as well? I'm not really sure what's
happening here.
Thanks
--
Dragos Tatulea
Software Developer @ Endocode AG
dragos(a)endocode.com
Endocode AG, Brückenstraße 5A, 10179 Berlin
+49 30 1206 4472 | info(a)endocode.com | www.endocode.com
Vorstandsvorsitzender: Mirko Boehm
Vorstände: Dr. Thomas Fricke, Sebastian Sucker
Aufsichtsratsvorsitzende: Alexandra Boehm
Registergericht: Amtsgericht Charlottenburg - HRB 150748 B
next prev parent reply other threads:[~2016-04-22 15:36 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <57178134.7070200@endocode.com>
2016-04-20 14:11 ` Ublox Toby Modem Yorn
2016-04-20 14:18 ` Dragos Tatulea
2016-04-20 14:24 ` Yorn
2016-04-20 15:01 ` Dragos Tatulea
2016-04-20 17:54 ` Yorn
2016-04-21 9:03 ` Dragos Tatulea
2016-04-21 10:06 ` Yorn
2016-04-21 18:37 ` Yorn
2016-04-22 10:23 ` Dragos Tatulea
2016-04-22 11:51 ` Yorn
2016-04-22 15:36 ` Dragos Tatulea [this message]
2016-04-24 13:03 ` Yorn
2016-04-20 15:02 ` Denis Kenzior
2016-04-20 16:34 ` Yorn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=571A44E0.6040201@endocode.com \
--to=dragos@endocode.com \
--cc=ofono@ofono.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox