Re: Ublox Toby Modem

[Yorn <yorn@gmx.net>]

[-- Attachment #1: Type: text/plain, Size: 3170 bytes --]

Hi Dragos,

Am 21.04.2016 um 11:03 schrieb Dragos Tatulea:
> Hi Yarn,
>
> On 04/20/2016 07:54 PM, Yorn wrote:
>> Hi Dragos,
>>
>> logs + comments inline
>>
>> Am 20.04.2016 um 17:01 schrieb Dragos Tatulea:
>>> Hi Yorn,
>>>
>>> On 04/20/2016 04:24 PM, Yorn wrote:
>>>> Hi Dragos,
>>>>
>>>> it is still active=0 :(
>>>>
>>>> root(a)colibri-vf:~/test# ./list-contexts
>>>> [ /ublox_0 ]
>>>>       [ /ublox_0/context1 ]
>>>>           Username =
>>>>           AuthenticationMethod = chap
>>>>           Protocol = ip
>>>>           Name = Internet
>>>>           Settings = { }
>>>>           IPv6.Settings = { }
>>>>           Active = 0
>>>>           AccessPointName =
>>>>           Password =
>>>>           Type = internet
>>>>
>>> Can you run only oFono (no connman) with OFONO_AT_DEBUG env variable set
>>> and run the following scripts:
>>>
>>> enable-modem
>>> online-modem
>>> activate-context
>>>
>>> Then send the logs.
>> Here they are [1]
>>
>> I set the context information now as follows:
>> root(a)colibri-vf:~/test# ./list-contexts
>> [ /ublox_0 ]
>>      [ /ublox_0/context1 ]
>>          Username = eplus
>>          AuthenticationMethod = chap
>>          Protocol = ip
>>          Name = Internet
>>          Settings = { }
>>          IPv6.Settings = { }
>>          Active = 0
>>          AccessPointName = m2m.tele2.com
>>          Password =
>>          Type = internet
>>
>>
> Okay. That's good for the next step.
>
>> I would expect AT Commands like this, however, I am not a modem AT command expert, so this is more or less taken from a tutorial (which set up my manual environment successfully)
>>
>> AT+COPS?
>> AT+CGDCONT=1,"IP","m2m.tele2.com"
>> ATD*99***1#
>> AT+CGACT=1,1
> It never gets to do a context activation because the modem is not gprs
> attached (see Attached state). The reason for that seems to be the
> RoamingAllowed property not being set to true/1. Try to set  it to true
> (set-roaming-allowed) and try again.
great, that works!

connmanctl> services
*AO Wired                ethernet_00142d4ac28f_cable
     Tele2 M2M (E-Plus)   cellular_240075810199181_context1
connmanctl> connect cellular_240075810199181_context1
connmanctl> services
*AO Wired                ethernet_00142d4ac28f_cable
   a Tele2 M2M (E-Plus)   cellular_240075810199181_context1
Error /net/connman/service/cellular_240075810199181_context1: Did not 
receive a reply. Possible causes include: the remote application did not 
send a reply, the message bus security policy blocked the reply, the 
reply timeout expired, or the network connection was broken.

now I just need to find out why connection is not done, I will have a 
look at the ofono/AT logs
Do you have any *known* parameters to check? I originally use pap for 
authentication and uses e-plus user/pw pair. There is no agent to help 
me, right!?

Thanks - Yorn
>> AT+CGDATA="PPP",1
>> CONNECT ""
>>
> Also, Toby doesn't use PPP in high throughput mode. It uses an ndis
> interface (you should see a usbX interface popping up when inserting
> the powered up modem on usb).
>
> Thanks