* [RFC] Binutils upgrade to 2.24 @ 2013-12-16 20:03 Khem Raj 2013-12-16 20:08 ` Saul Wold 2013-12-19 15:21 ` Saul Wold 0 siblings, 2 replies; 9+ messages in thread From: Khem Raj @ 2013-12-16 20:03 UTC (permalink / raw) To: openembeded-devel, Patches and discussions about the oe-core layer Hi I have pushed a contrib branch for binutils 2.24 upgrade here http://git.openembedded.org/openembedded-core-contrib/log/?h=kraj/binutils-2.24 I have tested it on both uclibc/eglibc and qemu machines. But it would be nice if it gets more testing for machines I havent tested Thanks -Khem ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [RFC] Binutils upgrade to 2.24 2013-12-16 20:03 [RFC] Binutils upgrade to 2.24 Khem Raj @ 2013-12-16 20:08 ` Saul Wold 2013-12-19 15:21 ` Saul Wold 1 sibling, 0 replies; 9+ messages in thread From: Saul Wold @ 2013-12-16 20:08 UTC (permalink / raw) To: Khem Raj, openembeded-devel, Patches and discussions about the oe-core layer On 12/16/2013 12:03 PM, Khem Raj wrote: > Hi > > I have pushed a contrib branch for binutils 2.24 upgrade here > > http://git.openembedded.org/openembedded-core-contrib/log/?h=kraj/binutils-2.24 > > I have tested it on both uclibc/eglibc and qemu machines. But it would > be nice if > it gets more testing for machines I havent tested > I will throw it into the next MUT build for you. What's going on with the Python3 patches? Sau! > Thanks > > -Khem > _______________________________________________ > Openembedded-core mailing list > Openembedded-core@lists.openembedded.org > http://lists.openembedded.org/mailman/listinfo/openembedded-core > > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [RFC] Binutils upgrade to 2.24 2013-12-16 20:03 [RFC] Binutils upgrade to 2.24 Khem Raj 2013-12-16 20:08 ` Saul Wold @ 2013-12-19 15:21 ` Saul Wold 2014-01-30 4:33 ` Khem Raj 1 sibling, 1 reply; 9+ messages in thread From: Saul Wold @ 2013-12-19 15:21 UTC (permalink / raw) To: Khem Raj, openembeded-devel, Patches and discussions about the oe-core layer On 12/16/2013 12:03 PM, Khem Raj wrote: > Hi > > I have pushed a contrib branch for binutils 2.24 upgrade here > > http://git.openembedded.org/openembedded-core-contrib/log/?h=kraj/binutils-2.24 > > I have tested it on both uclibc/eglibc and qemu machines. But it would > be nice if > it gets more testing for machines I havent tested > Looks like we tickled an LD bug of somekind, we are seeing the following failure across all machines, this was a second build using binutils 2.24, so there was some shared state usage. RP pointed out the --as-needed option was used with -lm as those symbols are math related. > | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwconfig iwconfig.o libiw.so.29 -lm > | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwlist iwlist.o libiw.so.29 -lm > | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwpriv iwpriv.o libiw.so.29 -lm > | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwspy iwspy.o libiw.so.29 -lm > | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwgetid iwgetid.o libiw.so.29 -lm > | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwevent iwevent.o libiw.so.29 -lm > | libiw.so.29: undefined reference to `ceil' > | libiw.so.29: undefined reference to `pow' > | libiw.so.29: undefined reference to `log10' > | libiw.so.29: undefined reference to `floor' > | collect2: error: ld returned 1 exit status > | make: *** [iwconfig] Error 1 > | make: *** Waiting for unfinished jobs.... > | libiw.so.29: undefined reference to `ceil' > | libiw.so.29: undefined reference to `pow' > | libiw.so.29: undefined reference to `log10' > | libiw.so.29: undefined reference to `floor' > | collect2: error: ld returned 1 exit status > | make: *** [iwgetid] Error 1 > | libiw.so.29: undefined reference to `ceil' > | libiw.so.29: undefined reference to `pow' > | libiw.so.29: undefined reference to `log10' > | libiw.so.29: undefined reference to `floor' > | collect2: error: ld returned 1 exit status > | make: *** [iwspy] Error 1 > | libiw.so.29: undefined reference to `ceil' > | libiw.so.29: undefined reference to `pow' > | libiw.so.29: undefined reference to `log10' > | libiw.so.29: undefined reference to `floor' > | collect2: error: ld returned 1 exit status > | make: *** [iwpriv] Error 1 > | libiw.so.29: undefined reference to `ceil' > | libiw.so.29: undefined reference to `pow' > | libiw.so.29: undefined reference to `log10' > | libiw.so.29: undefined reference to `floor' > | collect2: error: ld returned 1 exit status > | make: *** [iwlist] Error 1 > | libiw.so.29: undefined reference to `ceil' > | libiw.so.29: undefined reference to `pow' > | libiw.so.29: undefined reference to `log10' > | libiw.so.29: undefined reference to `floor' > | collect2: error: ld returned 1 exit status > | make: *** [iwevent] Error 1 > | ERROR: oe_runmake failed Link to the AB example, this is one of many. http://autobuilder.yoctoproject.org/main/builders/nightly-ppc/builds/54/steps/Building%20Images/logs/stdio Sau! > Thanks > > -Khem > _______________________________________________ > Openembedded-core mailing list > Openembedded-core@lists.openembedded.org > http://lists.openembedded.org/mailman/listinfo/openembedded-core > > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [RFC] Binutils upgrade to 2.24 2013-12-19 15:21 ` Saul Wold @ 2014-01-30 4:33 ` Khem Raj 2014-01-31 21:36 ` Saul Wold 0 siblings, 1 reply; 9+ messages in thread From: Khem Raj @ 2014-01-30 4:33 UTC (permalink / raw) To: Saul Wold Cc: openembeded-devel, Patches and discussions about the oe-core layer On Thu, Dec 19, 2013 at 7:21 AM, Saul Wold <sgw@linux.intel.com> wrote: > On 12/16/2013 12:03 PM, Khem Raj wrote: >> >> Hi >> >> I have pushed a contrib branch for binutils 2.24 upgrade here >> >> >> http://git.openembedded.org/openembedded-core-contrib/log/?h=kraj/binutils-2.24 >> >> I have tested it on both uclibc/eglibc and qemu machines. But it would >> be nice if >> it gets more testing for machines I havent tested >> > > Looks like we tickled an LD bug of somekind, we are seeing the following > failure across all machines, this was a second build using binutils 2.24, so > there was some shared state usage. > > RP pointed out the --as-needed option was used with -lm as those symbols are > math related. > >> | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 >> --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc >> -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed >> -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 >> -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwconfig iwconfig.o >> libiw.so.29 -lm >> | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 >> --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc >> -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed >> -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 >> -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwlist iwlist.o >> libiw.so.29 -lm >> | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 >> --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc >> -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed >> -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 >> -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwpriv iwpriv.o >> libiw.so.29 -lm >> | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 >> --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc >> -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed >> -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 >> -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwspy iwspy.o >> libiw.so.29 -lm >> | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 >> --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc >> -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed >> -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 >> -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwgetid iwgetid.o >> libiw.so.29 -lm >> | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 >> --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc >> -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed >> -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 >> -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwevent iwevent.o >> libiw.so.29 -lm >> | libiw.so.29: undefined reference to `ceil' >> | libiw.so.29: undefined reference to `pow' >> | libiw.so.29: undefined reference to `log10' >> | libiw.so.29: undefined reference to `floor' >> | collect2: error: ld returned 1 exit status >> | make: *** [iwconfig] Error 1 >> | make: *** Waiting for unfinished jobs.... >> | libiw.so.29: undefined reference to `ceil' >> | libiw.so.29: undefined reference to `pow' >> | libiw.so.29: undefined reference to `log10' >> | libiw.so.29: undefined reference to `floor' >> | collect2: error: ld returned 1 exit status >> | make: *** [iwgetid] Error 1 >> | libiw.so.29: undefined reference to `ceil' >> | libiw.so.29: undefined reference to `pow' >> | libiw.so.29: undefined reference to `log10' >> | libiw.so.29: undefined reference to `floor' >> | collect2: error: ld returned 1 exit status >> | make: *** [iwspy] Error 1 >> | libiw.so.29: undefined reference to `ceil' >> | libiw.so.29: undefined reference to `pow' >> | libiw.so.29: undefined reference to `log10' >> | libiw.so.29: undefined reference to `floor' >> | collect2: error: ld returned 1 exit status >> | make: *** [iwpriv] Error 1 >> | libiw.so.29: undefined reference to `ceil' >> | libiw.so.29: undefined reference to `pow' >> | libiw.so.29: undefined reference to `log10' >> | libiw.so.29: undefined reference to `floor' >> | collect2: error: ld returned 1 exit status >> | make: *** [iwlist] Error 1 >> | libiw.so.29: undefined reference to `ceil' >> | libiw.so.29: undefined reference to `pow' >> | libiw.so.29: undefined reference to `log10' >> | libiw.so.29: undefined reference to `floor' >> | collect2: error: ld returned 1 exit status >> | make: *** [iwevent] Error 1 >> | ERROR: oe_runmake failed > > I tested OE-Core builds for qemuppc 1. build from scratch ( MACHINE=qemuppc bitbake wirelesstools) 2. build from sstate ( MACHINE=qemuppc bitbake -cclean wirelesstools and then step 1) 3. Build second time just wireless-tools ( MACHINE=qemuppc bitbake -ccleanall wirelesstools and then step 1 ) 4. Rebuild all from sstate ( rm -rf tmp/ and then step 1) I could not reproduce this issue at all. The differences are I did it with OE-Core and not with Poky autbuilders run with poky distro policies. we should also actually regress OE-Core alone My build machine here is debian/wheezy and ubuntu 12.04 both 64bit) I am on commit c3f3fed1b397b6ee6d44e7d39e63d084e4a88e30 of OE-Core At this point I am out of ideas how to reproduce this. If there is some other developer out there who can try this patch and get the same errors,that would be interesting and probably we will get to root of it. ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [RFC] Binutils upgrade to 2.24 2014-01-30 4:33 ` Khem Raj @ 2014-01-31 21:36 ` Saul Wold 2014-01-31 22:08 ` Khem Raj 0 siblings, 1 reply; 9+ messages in thread From: Saul Wold @ 2014-01-31 21:36 UTC (permalink / raw) To: Khem Raj; +Cc: openembeded-devel, Patches and discussions about the oe-core layer On 01/29/2014 08:33 PM, Khem Raj wrote: > On Thu, Dec 19, 2013 at 7:21 AM, Saul Wold <sgw@linux.intel.com> wrote: >> On 12/16/2013 12:03 PM, Khem Raj wrote: >>> >>> Hi >>> >>> I have pushed a contrib branch for binutils 2.24 upgrade here >>> >>> >>> http://git.openembedded.org/openembedded-core-contrib/log/?h=kraj/binutils-2.24 >>> >>> I have tested it on both uclibc/eglibc and qemu machines. But it would >>> be nice if >>> it gets more testing for machines I havent tested >>> >> >> Looks like we tickled an LD bug of somekind, we are seeing the following >> failure across all machines, this was a second build using binutils 2.24, so >> there was some shared state usage. >> >> RP pointed out the --as-needed option was used with -lm as those symbols are >> math related. >> >>> | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 >>> --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc >>> -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed >>> -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 >>> -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwconfig iwconfig.o >>> libiw.so.29 -lm >>> | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 >>> --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc >>> -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed >>> -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 >>> -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwlist iwlist.o >>> libiw.so.29 -lm >>> | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 >>> --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc >>> -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed >>> -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 >>> -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwpriv iwpriv.o >>> libiw.so.29 -lm >>> | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 >>> --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc >>> -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed >>> -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 >>> -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwspy iwspy.o >>> libiw.so.29 -lm >>> | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 >>> --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc >>> -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed >>> -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 >>> -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwgetid iwgetid.o >>> libiw.so.29 -lm >>> | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 >>> --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc >>> -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed >>> -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 >>> -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwevent iwevent.o >>> libiw.so.29 -lm >>> | libiw.so.29: undefined reference to `ceil' >>> | libiw.so.29: undefined reference to `pow' >>> | libiw.so.29: undefined reference to `log10' >>> | libiw.so.29: undefined reference to `floor' >>> | collect2: error: ld returned 1 exit status >>> | make: *** [iwconfig] Error 1 >>> | make: *** Waiting for unfinished jobs.... >>> | libiw.so.29: undefined reference to `ceil' >>> | libiw.so.29: undefined reference to `pow' >>> | libiw.so.29: undefined reference to `log10' >>> | libiw.so.29: undefined reference to `floor' >>> | collect2: error: ld returned 1 exit status >>> | make: *** [iwgetid] Error 1 >>> | libiw.so.29: undefined reference to `ceil' >>> | libiw.so.29: undefined reference to `pow' >>> | libiw.so.29: undefined reference to `log10' >>> | libiw.so.29: undefined reference to `floor' >>> | collect2: error: ld returned 1 exit status >>> | make: *** [iwspy] Error 1 >>> | libiw.so.29: undefined reference to `ceil' >>> | libiw.so.29: undefined reference to `pow' >>> | libiw.so.29: undefined reference to `log10' >>> | libiw.so.29: undefined reference to `floor' >>> | collect2: error: ld returned 1 exit status >>> | make: *** [iwpriv] Error 1 >>> | libiw.so.29: undefined reference to `ceil' >>> | libiw.so.29: undefined reference to `pow' >>> | libiw.so.29: undefined reference to `log10' >>> | libiw.so.29: undefined reference to `floor' >>> | collect2: error: ld returned 1 exit status >>> | make: *** [iwlist] Error 1 >>> | libiw.so.29: undefined reference to `ceil' >>> | libiw.so.29: undefined reference to `pow' >>> | libiw.so.29: undefined reference to `log10' >>> | libiw.so.29: undefined reference to `floor' >>> | collect2: error: ld returned 1 exit status >>> | make: *** [iwevent] Error 1 >>> | ERROR: oe_runmake failed >> >> > > I tested OE-Core builds for qemuppc > > 1. build from scratch ( MACHINE=qemuppc bitbake wirelesstools) > 2. build from sstate ( MACHINE=qemuppc bitbake -cclean wirelesstools > and then step 1) > 3. Build second time just wireless-tools ( MACHINE=qemuppc bitbake > -ccleanall wirelesstools and then step 1 ) > 4. Rebuild all from sstate ( rm -rf tmp/ and then step 1) > > I could not reproduce this issue at all. The differences are I did it > with OE-Core and not with Poky autbuilders run with poky distro > policies. > we should also actually regress OE-Core alone > > My build machine here is debian/wheezy and ubuntu 12.04 both 64bit) > > I am on commit c3f3fed1b397b6ee6d44e7d39e63d084e4a88e30 of OE-Core > > At this point I am out of ideas how to reproduce this. > > If there is some other developer out there who can try this patch and > get the same errors,that would be interesting and probably we > will get to root of it. > > Sorry Khem, failed again! Build Configuration: BB_VERSION = "1.21.1" BUILD_SYS = "x86_64-linux" NATIVELSBSTRING = "Ubuntu-13.10" TARGET_SYS = "powerpc-poky-linux" MACHINE = "qemuppc" DISTRO = "poky" DISTRO_VERSION = "1.5+snapshot-20140131" TUNE_FEATURES = "m32 fpu-hard ppc7400 altivec" TARGET_FPU = "" meta meta-yocto meta-yocto-bsp = "mut:980faeefaac3466aff38822479bf7d9fff4994eb" I did a bitbake -c cleansstate binutils-native eglibc wireless-tools followed by a bitbake of wireless-tools and I still get this same failure. My build info above. I tried with OE-Core alone and still got the same failure (this time with ARM!) Build Configuration: BB_VERSION = "1.21.1" BUILD_SYS = "x86_64-linux" NATIVELSBSTRING = "Ubuntu-13.10" TARGET_SYS = "arm-oe-linux-gnueabi" MACHINE = "qemuarm" DISTRO = "nodistro" DISTRO_VERSION = "nodistro.0" TUNE_FEATURES = "armv5 thumb dsp" TARGET_FPU = "soft" meta = "binutils:e20eeca128f362d500e19c5757e13cc7dab86b3a" Totally clean build area. Sau! ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [RFC] Binutils upgrade to 2.24 2014-01-31 21:36 ` Saul Wold @ 2014-01-31 22:08 ` Khem Raj 2014-01-31 22:35 ` Saul Wold 0 siblings, 1 reply; 9+ messages in thread From: Khem Raj @ 2014-01-31 22:08 UTC (permalink / raw) To: Saul Wold Cc: openembeded-devel, Patches and discussions about the oe-core layer On Fri, Jan 31, 2014 at 1:36 PM, Saul Wold <sgw@linux.intel.com> wrote: > On 01/29/2014 08:33 PM, Khem Raj wrote: >> >> On Thu, Dec 19, 2013 at 7:21 AM, Saul Wold <sgw@linux.intel.com> wrote: >>> >>> On 12/16/2013 12:03 PM, Khem Raj wrote: >>>> >>>> >>>> Hi >>>> >>>> I have pushed a contrib branch for binutils 2.24 upgrade here >>>> >>>> >>>> >>>> http://git.openembedded.org/openembedded-core-contrib/log/?h=kraj/binutils-2.24 >>>> >>>> I have tested it on both uclibc/eglibc and qemu machines. But it would >>>> be nice if >>>> it gets more testing for machines I havent tested >>>> >>> >>> Looks like we tickled an LD bug of somekind, we are seeing the following >>> failure across all machines, this was a second build using binutils 2.24, >>> so >>> there was some shared state usage. >>> >>> RP pointed out the --as-needed option was used with -lm as those symbols >>> are >>> math related. >>> >>>> | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 >>>> >>>> --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc >>>> -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed >>>> >>>> -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 >>>> -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwconfig >>>> iwconfig.o >>>> libiw.so.29 -lm >>>> | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 >>>> >>>> --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc >>>> -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed >>>> >>>> -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 >>>> -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwlist iwlist.o >>>> libiw.so.29 -lm >>>> | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 >>>> >>>> --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc >>>> -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed >>>> >>>> -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 >>>> -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwpriv iwpriv.o >>>> libiw.so.29 -lm >>>> | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 >>>> >>>> --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc >>>> -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed >>>> >>>> -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 >>>> -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwspy iwspy.o >>>> libiw.so.29 -lm >>>> | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 >>>> >>>> --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc >>>> -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed >>>> >>>> -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 >>>> -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwgetid >>>> iwgetid.o >>>> libiw.so.29 -lm >>>> | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 >>>> >>>> --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc >>>> -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed >>>> >>>> -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 >>>> -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwevent >>>> iwevent.o >>>> libiw.so.29 -lm >>>> | libiw.so.29: undefined reference to `ceil' >>>> | libiw.so.29: undefined reference to `pow' >>>> | libiw.so.29: undefined reference to `log10' >>>> | libiw.so.29: undefined reference to `floor' >>>> | collect2: error: ld returned 1 exit status >>>> | make: *** [iwconfig] Error 1 >>>> | make: *** Waiting for unfinished jobs.... >>>> | libiw.so.29: undefined reference to `ceil' >>>> | libiw.so.29: undefined reference to `pow' >>>> | libiw.so.29: undefined reference to `log10' >>>> | libiw.so.29: undefined reference to `floor' >>>> | collect2: error: ld returned 1 exit status >>>> | make: *** [iwgetid] Error 1 >>>> | libiw.so.29: undefined reference to `ceil' >>>> | libiw.so.29: undefined reference to `pow' >>>> | libiw.so.29: undefined reference to `log10' >>>> | libiw.so.29: undefined reference to `floor' >>>> | collect2: error: ld returned 1 exit status >>>> | make: *** [iwspy] Error 1 >>>> | libiw.so.29: undefined reference to `ceil' >>>> | libiw.so.29: undefined reference to `pow' >>>> | libiw.so.29: undefined reference to `log10' >>>> | libiw.so.29: undefined reference to `floor' >>>> | collect2: error: ld returned 1 exit status >>>> | make: *** [iwpriv] Error 1 >>>> | libiw.so.29: undefined reference to `ceil' >>>> | libiw.so.29: undefined reference to `pow' >>>> | libiw.so.29: undefined reference to `log10' >>>> | libiw.so.29: undefined reference to `floor' >>>> | collect2: error: ld returned 1 exit status >>>> | make: *** [iwlist] Error 1 >>>> | libiw.so.29: undefined reference to `ceil' >>>> | libiw.so.29: undefined reference to `pow' >>>> | libiw.so.29: undefined reference to `log10' >>>> | libiw.so.29: undefined reference to `floor' >>>> | collect2: error: ld returned 1 exit status >>>> | make: *** [iwevent] Error 1 >>>> | ERROR: oe_runmake failed >>> >>> >>> >> >> I tested OE-Core builds for qemuppc >> >> 1. build from scratch ( MACHINE=qemuppc bitbake wirelesstools) >> 2. build from sstate ( MACHINE=qemuppc bitbake -cclean wirelesstools >> and then step 1) >> 3. Build second time just wireless-tools ( MACHINE=qemuppc bitbake >> -ccleanall wirelesstools and then step 1 ) >> 4. Rebuild all from sstate ( rm -rf tmp/ and then step 1) >> >> I could not reproduce this issue at all. The differences are I did it >> with OE-Core and not with Poky autbuilders run with poky distro >> policies. >> we should also actually regress OE-Core alone >> >> My build machine here is debian/wheezy and ubuntu 12.04 both 64bit) >> >> I am on commit c3f3fed1b397b6ee6d44e7d39e63d084e4a88e30 of OE-Core >> >> At this point I am out of ideas how to reproduce this. >> >> If there is some other developer out there who can try this patch and >> get the same errors,that would be interesting and probably we >> will get to root of it. >> >> > Sorry Khem, failed again! > > Build Configuration: > BB_VERSION = "1.21.1" > BUILD_SYS = "x86_64-linux" > NATIVELSBSTRING = "Ubuntu-13.10" > TARGET_SYS = "powerpc-poky-linux" > MACHINE = "qemuppc" > DISTRO = "poky" > DISTRO_VERSION = "1.5+snapshot-20140131" > TUNE_FEATURES = "m32 fpu-hard ppc7400 altivec" > TARGET_FPU = "" > meta > meta-yocto > meta-yocto-bsp = "mut:980faeefaac3466aff38822479bf7d9fff4994eb" > > > I did a bitbake -c cleansstate binutils-native eglibc wireless-tools > followed by a bitbake of wireless-tools and I still get this same failure. > OK still cant get it here. For above, you did those cmds on clean tmp/ and sstate being around ? or tmp with previous build in there > My build info above. > > I tried with OE-Core alone and still got the same failure (this time with > ARM!) > > Build Configuration: > BB_VERSION = "1.21.1" > BUILD_SYS = "x86_64-linux" > NATIVELSBSTRING = "Ubuntu-13.10" > TARGET_SYS = "arm-oe-linux-gnueabi" > MACHINE = "qemuarm" > DISTRO = "nodistro" > DISTRO_VERSION = "nodistro.0" > TUNE_FEATURES = "armv5 thumb dsp" > TARGET_FPU = "soft" > meta = "binutils:e20eeca128f362d500e19c5757e13cc7dab86b3a" > > > Totally clean build area. > and no sstate ? > > > Sau! > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [RFC] Binutils upgrade to 2.24 2014-01-31 22:08 ` Khem Raj @ 2014-01-31 22:35 ` Saul Wold 2014-01-31 23:42 ` Khem Raj 0 siblings, 1 reply; 9+ messages in thread From: Saul Wold @ 2014-01-31 22:35 UTC (permalink / raw) To: Khem Raj; +Cc: openembeded-devel, Patches and discussions about the oe-core layer On 01/31/2014 02:08 PM, Khem Raj wrote: > On Fri, Jan 31, 2014 at 1:36 PM, Saul Wold <sgw@linux.intel.com> wrote: >> On 01/29/2014 08:33 PM, Khem Raj wrote: >>> >>> On Thu, Dec 19, 2013 at 7:21 AM, Saul Wold <sgw@linux.intel.com> wrote: >>>> >>>> On 12/16/2013 12:03 PM, Khem Raj wrote: >>>>> >>>>> >>>>> Hi >>>>> >>>>> I have pushed a contrib branch for binutils 2.24 upgrade here >>>>> >>>>> >>>>> >>>>> http://git.openembedded.org/openembedded-core-contrib/log/?h=kraj/binutils-2.24 >>>>> >>>>> I have tested it on both uclibc/eglibc and qemu machines. But it would >>>>> be nice if >>>>> it gets more testing for machines I havent tested >>>>> >>>> >>>> Looks like we tickled an LD bug of somekind, we are seeing the following >>>> failure across all machines, this was a second build using binutils 2.24, >>>> so >>>> there was some shared state usage. >>>> >>>> RP pointed out the --as-needed option was used with -lm as those symbols >>>> are >>>> math related. >>>> >>>>> | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 >>>>> >>>>> --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc >>>>> -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed >>>>> >>>>> -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 >>>>> -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwconfig >>>>> iwconfig.o >>>>> libiw.so.29 -lm >>>>> | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 >>>>> >>>>> --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc >>>>> -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed >>>>> >>>>> -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 >>>>> -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwlist iwlist.o >>>>> libiw.so.29 -lm >>>>> | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 >>>>> >>>>> --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc >>>>> -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed >>>>> >>>>> -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 >>>>> -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwpriv iwpriv.o >>>>> libiw.so.29 -lm >>>>> | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 >>>>> >>>>> --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc >>>>> -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed >>>>> >>>>> -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 >>>>> -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwspy iwspy.o >>>>> libiw.so.29 -lm >>>>> | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 >>>>> >>>>> --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc >>>>> -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed >>>>> >>>>> -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 >>>>> -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwgetid >>>>> iwgetid.o >>>>> libiw.so.29 -lm >>>>> | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 >>>>> >>>>> --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc >>>>> -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed >>>>> >>>>> -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 >>>>> -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwevent >>>>> iwevent.o >>>>> libiw.so.29 -lm >>>>> | libiw.so.29: undefined reference to `ceil' >>>>> | libiw.so.29: undefined reference to `pow' >>>>> | libiw.so.29: undefined reference to `log10' >>>>> | libiw.so.29: undefined reference to `floor' >>>>> | collect2: error: ld returned 1 exit status >>>>> | make: *** [iwconfig] Error 1 >>>>> | make: *** Waiting for unfinished jobs.... >>>>> | libiw.so.29: undefined reference to `ceil' >>>>> | libiw.so.29: undefined reference to `pow' >>>>> | libiw.so.29: undefined reference to `log10' >>>>> | libiw.so.29: undefined reference to `floor' >>>>> | collect2: error: ld returned 1 exit status >>>>> | make: *** [iwgetid] Error 1 >>>>> | libiw.so.29: undefined reference to `ceil' >>>>> | libiw.so.29: undefined reference to `pow' >>>>> | libiw.so.29: undefined reference to `log10' >>>>> | libiw.so.29: undefined reference to `floor' >>>>> | collect2: error: ld returned 1 exit status >>>>> | make: *** [iwspy] Error 1 >>>>> | libiw.so.29: undefined reference to `ceil' >>>>> | libiw.so.29: undefined reference to `pow' >>>>> | libiw.so.29: undefined reference to `log10' >>>>> | libiw.so.29: undefined reference to `floor' >>>>> | collect2: error: ld returned 1 exit status >>>>> | make: *** [iwpriv] Error 1 >>>>> | libiw.so.29: undefined reference to `ceil' >>>>> | libiw.so.29: undefined reference to `pow' >>>>> | libiw.so.29: undefined reference to `log10' >>>>> | libiw.so.29: undefined reference to `floor' >>>>> | collect2: error: ld returned 1 exit status >>>>> | make: *** [iwlist] Error 1 >>>>> | libiw.so.29: undefined reference to `ceil' >>>>> | libiw.so.29: undefined reference to `pow' >>>>> | libiw.so.29: undefined reference to `log10' >>>>> | libiw.so.29: undefined reference to `floor' >>>>> | collect2: error: ld returned 1 exit status >>>>> | make: *** [iwevent] Error 1 >>>>> | ERROR: oe_runmake failed >>>> >>>> >>>> >>> >>> I tested OE-Core builds for qemuppc >>> >>> 1. build from scratch ( MACHINE=qemuppc bitbake wirelesstools) >>> 2. build from sstate ( MACHINE=qemuppc bitbake -cclean wirelesstools >>> and then step 1) >>> 3. Build second time just wireless-tools ( MACHINE=qemuppc bitbake >>> -ccleanall wirelesstools and then step 1 ) >>> 4. Rebuild all from sstate ( rm -rf tmp/ and then step 1) >>> >>> I could not reproduce this issue at all. The differences are I did it >>> with OE-Core and not with Poky autbuilders run with poky distro >>> policies. >>> we should also actually regress OE-Core alone >>> >>> My build machine here is debian/wheezy and ubuntu 12.04 both 64bit) >>> >>> I am on commit c3f3fed1b397b6ee6d44e7d39e63d084e4a88e30 of OE-Core >>> >>> At this point I am out of ideas how to reproduce this. >>> >>> If there is some other developer out there who can try this patch and >>> get the same errors,that would be interesting and probably we >>> will get to root of it. >>> >>> >> Sorry Khem, failed again! >> >> Build Configuration: >> BB_VERSION = "1.21.1" >> BUILD_SYS = "x86_64-linux" >> NATIVELSBSTRING = "Ubuntu-13.10" >> TARGET_SYS = "powerpc-poky-linux" >> MACHINE = "qemuppc" >> DISTRO = "poky" >> DISTRO_VERSION = "1.5+snapshot-20140131" >> TUNE_FEATURES = "m32 fpu-hard ppc7400 altivec" >> TARGET_FPU = "" >> meta >> meta-yocto >> meta-yocto-bsp = "mut:980faeefaac3466aff38822479bf7d9fff4994eb" >> >> >> I did a bitbake -c cleansstate binutils-native eglibc wireless-tools >> followed by a bitbake of wireless-tools and I still get this same failure. >> > > OK still cant get it here. For above, you did those cmds on clean tmp/ > and sstate being around ? or tmp with previous build in there > Yes, but I just did another clean sstate, clean tmp dir of both of these build and they both still fail. Do you have a newer machine than 12.04? What's the compiler/binutils that you have on 12.04 for the native build. I have binutils-2.23.52 and gcc-4.8.1 on my Ubuntu 13.10. Sau! > >> My build info above. >> >> I tried with OE-Core alone and still got the same failure (this time with >> ARM!) >> >> Build Configuration: >> BB_VERSION = "1.21.1" >> BUILD_SYS = "x86_64-linux" >> NATIVELSBSTRING = "Ubuntu-13.10" >> TARGET_SYS = "arm-oe-linux-gnueabi" >> MACHINE = "qemuarm" >> DISTRO = "nodistro" >> DISTRO_VERSION = "nodistro.0" >> TUNE_FEATURES = "armv5 thumb dsp" >> TARGET_FPU = "soft" >> meta = "binutils:e20eeca128f362d500e19c5757e13cc7dab86b3a" >> >> >> Totally clean build area. >> > > and no sstate ? > Build again with NO Sstate and clean build area >> >> >> Sau! >> > > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [RFC] Binutils upgrade to 2.24 2014-01-31 22:35 ` Saul Wold @ 2014-01-31 23:42 ` Khem Raj 2014-02-01 9:05 ` Khem Raj 0 siblings, 1 reply; 9+ messages in thread From: Khem Raj @ 2014-01-31 23:42 UTC (permalink / raw) To: Saul Wold Cc: openembeded-devel, Patches and discussions about the oe-core layer On Fri, Jan 31, 2014 at 2:35 PM, Saul Wold <sgw@linux.intel.com> wrote: > On 01/31/2014 02:08 PM, Khem Raj wrote: >> >> On Fri, Jan 31, 2014 at 1:36 PM, Saul Wold <sgw@linux.intel.com> wrote: >>> >>> On 01/29/2014 08:33 PM, Khem Raj wrote: >>>> >>>> >>>> On Thu, Dec 19, 2013 at 7:21 AM, Saul Wold <sgw@linux.intel.com> wrote: >>>>> >>>>> >>>>> On 12/16/2013 12:03 PM, Khem Raj wrote: >>>>>> >>>>>> >>>>>> >>>>>> Hi >>>>>> >>>>>> I have pushed a contrib branch for binutils 2.24 upgrade here >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> http://git.openembedded.org/openembedded-core-contrib/log/?h=kraj/binutils-2.24 >>>>>> >>>>>> I have tested it on both uclibc/eglibc and qemu machines. But it would >>>>>> be nice if >>>>>> it gets more testing for machines I havent tested >>>>>> >>>>> >>>>> Looks like we tickled an LD bug of somekind, we are seeing the >>>>> following >>>>> failure across all machines, this was a second build using binutils >>>>> 2.24, >>>>> so >>>>> there was some shared state usage. >>>>> >>>>> RP pointed out the --as-needed option was used with -lm as those >>>>> symbols >>>>> are >>>>> math related. >>>>> >>>>>> | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 >>>>>> >>>>>> >>>>>> --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc >>>>>> -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed >>>>>> >>>>>> >>>>>> -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 >>>>>> -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwconfig >>>>>> iwconfig.o >>>>>> libiw.so.29 -lm >>>>>> | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 >>>>>> >>>>>> >>>>>> --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc >>>>>> -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed >>>>>> >>>>>> >>>>>> -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 >>>>>> -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwlist >>>>>> iwlist.o >>>>>> libiw.so.29 -lm >>>>>> | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 >>>>>> >>>>>> >>>>>> --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc >>>>>> -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed >>>>>> >>>>>> >>>>>> -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 >>>>>> -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwpriv >>>>>> iwpriv.o >>>>>> libiw.so.29 -lm >>>>>> | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 >>>>>> >>>>>> >>>>>> --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc >>>>>> -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed >>>>>> >>>>>> >>>>>> -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 >>>>>> -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwspy iwspy.o >>>>>> libiw.so.29 -lm >>>>>> | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 >>>>>> >>>>>> >>>>>> --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc >>>>>> -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed >>>>>> >>>>>> >>>>>> -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 >>>>>> -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwgetid >>>>>> iwgetid.o >>>>>> libiw.so.29 -lm >>>>>> | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 >>>>>> >>>>>> >>>>>> --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc >>>>>> -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed >>>>>> >>>>>> >>>>>> -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 >>>>>> -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwevent >>>>>> iwevent.o >>>>>> libiw.so.29 -lm >>>>>> | libiw.so.29: undefined reference to `ceil' >>>>>> | libiw.so.29: undefined reference to `pow' >>>>>> | libiw.so.29: undefined reference to `log10' >>>>>> | libiw.so.29: undefined reference to `floor' >>>>>> | collect2: error: ld returned 1 exit status >>>>>> | make: *** [iwconfig] Error 1 >>>>>> | make: *** Waiting for unfinished jobs.... >>>>>> | libiw.so.29: undefined reference to `ceil' >>>>>> | libiw.so.29: undefined reference to `pow' >>>>>> | libiw.so.29: undefined reference to `log10' >>>>>> | libiw.so.29: undefined reference to `floor' >>>>>> | collect2: error: ld returned 1 exit status >>>>>> | make: *** [iwgetid] Error 1 >>>>>> | libiw.so.29: undefined reference to `ceil' >>>>>> | libiw.so.29: undefined reference to `pow' >>>>>> | libiw.so.29: undefined reference to `log10' >>>>>> | libiw.so.29: undefined reference to `floor' >>>>>> | collect2: error: ld returned 1 exit status >>>>>> | make: *** [iwspy] Error 1 >>>>>> | libiw.so.29: undefined reference to `ceil' >>>>>> | libiw.so.29: undefined reference to `pow' >>>>>> | libiw.so.29: undefined reference to `log10' >>>>>> | libiw.so.29: undefined reference to `floor' >>>>>> | collect2: error: ld returned 1 exit status >>>>>> | make: *** [iwpriv] Error 1 >>>>>> | libiw.so.29: undefined reference to `ceil' >>>>>> | libiw.so.29: undefined reference to `pow' >>>>>> | libiw.so.29: undefined reference to `log10' >>>>>> | libiw.so.29: undefined reference to `floor' >>>>>> | collect2: error: ld returned 1 exit status >>>>>> | make: *** [iwlist] Error 1 >>>>>> | libiw.so.29: undefined reference to `ceil' >>>>>> | libiw.so.29: undefined reference to `pow' >>>>>> | libiw.so.29: undefined reference to `log10' >>>>>> | libiw.so.29: undefined reference to `floor' >>>>>> | collect2: error: ld returned 1 exit status >>>>>> | make: *** [iwevent] Error 1 >>>>>> | ERROR: oe_runmake failed >>>>> >>>>> >>>>> >>>>> >>>> >>>> I tested OE-Core builds for qemuppc >>>> >>>> 1. build from scratch ( MACHINE=qemuppc bitbake wirelesstools) >>>> 2. build from sstate ( MACHINE=qemuppc bitbake -cclean wirelesstools >>>> and then step 1) >>>> 3. Build second time just wireless-tools ( MACHINE=qemuppc bitbake >>>> -ccleanall wirelesstools and then step 1 ) >>>> 4. Rebuild all from sstate ( rm -rf tmp/ and then step 1) >>>> >>>> I could not reproduce this issue at all. The differences are I did it >>>> with OE-Core and not with Poky autbuilders run with poky distro >>>> policies. >>>> we should also actually regress OE-Core alone >>>> >>>> My build machine here is debian/wheezy and ubuntu 12.04 both 64bit) >>>> >>>> I am on commit c3f3fed1b397b6ee6d44e7d39e63d084e4a88e30 of OE-Core >>>> >>>> At this point I am out of ideas how to reproduce this. >>>> >>>> If there is some other developer out there who can try this patch and >>>> get the same errors,that would be interesting and probably we >>>> will get to root of it. >>>> >>>> >>> Sorry Khem, failed again! >>> >>> Build Configuration: >>> BB_VERSION = "1.21.1" >>> BUILD_SYS = "x86_64-linux" >>> NATIVELSBSTRING = "Ubuntu-13.10" >>> TARGET_SYS = "powerpc-poky-linux" >>> MACHINE = "qemuppc" >>> DISTRO = "poky" >>> DISTRO_VERSION = "1.5+snapshot-20140131" >>> TUNE_FEATURES = "m32 fpu-hard ppc7400 altivec" >>> TARGET_FPU = "" >>> meta >>> meta-yocto >>> meta-yocto-bsp = "mut:980faeefaac3466aff38822479bf7d9fff4994eb" >>> >>> >>> I did a bitbake -c cleansstate binutils-native eglibc wireless-tools >>> followed by a bitbake of wireless-tools and I still get this same >>> failure. >>> >> >> OK still cant get it here. For above, you did those cmds on clean tmp/ >> and sstate being around ? or tmp with previous build in there >> > Yes, but I just did another clean sstate, clean tmp dir of both of these > build and they both still fail. > > Do you have a newer machine than 12.04? What's the compiler/binutils that > you have on 12.04 for the native build. I have binutils-2.23.52 and > gcc-4.8.1 on my Ubuntu 13.10. Mine is debian/wheezy here. I think I have access to 13.10 box somewhere, let me try it there > > Sau! > > >> >>> My build info above. >>> >>> I tried with OE-Core alone and still got the same failure (this time with >>> ARM!) >>> >>> Build Configuration: >>> BB_VERSION = "1.21.1" >>> BUILD_SYS = "x86_64-linux" >>> NATIVELSBSTRING = "Ubuntu-13.10" >>> TARGET_SYS = "arm-oe-linux-gnueabi" >>> MACHINE = "qemuarm" >>> DISTRO = "nodistro" >>> DISTRO_VERSION = "nodistro.0" >>> TUNE_FEATURES = "armv5 thumb dsp" >>> TARGET_FPU = "soft" >>> meta = "binutils:e20eeca128f362d500e19c5757e13cc7dab86b3a" >>> >>> >>> Totally clean build area. >>> >> >> and no sstate ? >> > > Build again with NO Sstate and clean build area > >>> >>> >>> Sau! >>> >> >> > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [RFC] Binutils upgrade to 2.24 2014-01-31 23:42 ` Khem Raj @ 2014-02-01 9:05 ` Khem Raj 0 siblings, 0 replies; 9+ messages in thread From: Khem Raj @ 2014-02-01 9:05 UTC (permalink / raw) To: Saul Wold Cc: openembeded-devel, Patches and discussions about the oe-core layer On Fri, Jan 31, 2014 at 3:42 PM, Khem Raj <raj.khem@gmail.com> wrote: > On Fri, Jan 31, 2014 at 2:35 PM, Saul Wold <sgw@linux.intel.com> wrote: >> On 01/31/2014 02:08 PM, Khem Raj wrote: >>> >>> On Fri, Jan 31, 2014 at 1:36 PM, Saul Wold <sgw@linux.intel.com> wrote: >>>> >>>> On 01/29/2014 08:33 PM, Khem Raj wrote: >>>>> >>>>> >>>>> On Thu, Dec 19, 2013 at 7:21 AM, Saul Wold <sgw@linux.intel.com> wrote: >>>>>> >>>>>> >>>>>> On 12/16/2013 12:03 PM, Khem Raj wrote: >>>>>>> >>>>>>> >>>>>>> >>>>>>> Hi >>>>>>> >>>>>>> I have pushed a contrib branch for binutils 2.24 upgrade here >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> http://git.openembedded.org/openembedded-core-contrib/log/?h=kraj/binutils-2.24 >>>>>>> >>>>>>> I have tested it on both uclibc/eglibc and qemu machines. But it would >>>>>>> be nice if >>>>>>> it gets more testing for machines I havent tested >>>>>>> >>>>>> >>>>>> Looks like we tickled an LD bug of somekind, we are seeing the >>>>>> following >>>>>> failure across all machines, this was a second build using binutils >>>>>> 2.24, >>>>>> so >>>>>> there was some shared state usage. >>>>>> >>>>>> RP pointed out the --as-needed option was used with -lm as those >>>>>> symbols >>>>>> are >>>>>> math related. >>>>>> >>>>>>> | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 >>>>>>> >>>>>>> >>>>>>> --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc >>>>>>> -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed >>>>>>> >>>>>>> >>>>>>> -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 >>>>>>> -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwconfig >>>>>>> iwconfig.o >>>>>>> libiw.so.29 -lm >>>>>>> | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 >>>>>>> >>>>>>> >>>>>>> --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc >>>>>>> -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed >>>>>>> >>>>>>> >>>>>>> -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 >>>>>>> -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwlist >>>>>>> iwlist.o >>>>>>> libiw.so.29 -lm >>>>>>> | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 >>>>>>> >>>>>>> >>>>>>> --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc >>>>>>> -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed >>>>>>> >>>>>>> >>>>>>> -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 >>>>>>> -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwpriv >>>>>>> iwpriv.o >>>>>>> libiw.so.29 -lm >>>>>>> | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 >>>>>>> >>>>>>> >>>>>>> --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc >>>>>>> -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed >>>>>>> >>>>>>> >>>>>>> -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 >>>>>>> -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwspy iwspy.o >>>>>>> libiw.so.29 -lm >>>>>>> | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 >>>>>>> >>>>>>> >>>>>>> --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc >>>>>>> -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed >>>>>>> >>>>>>> >>>>>>> -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 >>>>>>> -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwgetid >>>>>>> iwgetid.o >>>>>>> libiw.so.29 -lm >>>>>>> | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 >>>>>>> >>>>>>> >>>>>>> --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/qemuppc >>>>>>> -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed >>>>>>> >>>>>>> >>>>>>> -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/ppc7400-poky-linux/wireless-tools/1_29-r4/wireless_tools.29 >>>>>>> -O2 -pipe -g -feliminate-unused-debug-types -MMD -o iwevent >>>>>>> iwevent.o >>>>>>> libiw.so.29 -lm >>>>>>> | libiw.so.29: undefined reference to `ceil' >>>>>>> | libiw.so.29: undefined reference to `pow' >>>>>>> | libiw.so.29: undefined reference to `log10' >>>>>>> | libiw.so.29: undefined reference to `floor' >>>>>>> | collect2: error: ld returned 1 exit status >>>>>>> | make: *** [iwconfig] Error 1 >>>>>>> | make: *** Waiting for unfinished jobs.... >>>>>>> | libiw.so.29: undefined reference to `ceil' >>>>>>> | libiw.so.29: undefined reference to `pow' >>>>>>> | libiw.so.29: undefined reference to `log10' >>>>>>> | libiw.so.29: undefined reference to `floor' >>>>>>> | collect2: error: ld returned 1 exit status >>>>>>> | make: *** [iwgetid] Error 1 >>>>>>> | libiw.so.29: undefined reference to `ceil' >>>>>>> | libiw.so.29: undefined reference to `pow' >>>>>>> | libiw.so.29: undefined reference to `log10' >>>>>>> | libiw.so.29: undefined reference to `floor' >>>>>>> | collect2: error: ld returned 1 exit status >>>>>>> | make: *** [iwspy] Error 1 >>>>>>> | libiw.so.29: undefined reference to `ceil' >>>>>>> | libiw.so.29: undefined reference to `pow' >>>>>>> | libiw.so.29: undefined reference to `log10' >>>>>>> | libiw.so.29: undefined reference to `floor' >>>>>>> | collect2: error: ld returned 1 exit status >>>>>>> | make: *** [iwpriv] Error 1 >>>>>>> | libiw.so.29: undefined reference to `ceil' >>>>>>> | libiw.so.29: undefined reference to `pow' >>>>>>> | libiw.so.29: undefined reference to `log10' >>>>>>> | libiw.so.29: undefined reference to `floor' >>>>>>> | collect2: error: ld returned 1 exit status >>>>>>> | make: *** [iwlist] Error 1 >>>>>>> | libiw.so.29: undefined reference to `ceil' >>>>>>> | libiw.so.29: undefined reference to `pow' >>>>>>> | libiw.so.29: undefined reference to `log10' >>>>>>> | libiw.so.29: undefined reference to `floor' >>>>>>> | collect2: error: ld returned 1 exit status >>>>>>> | make: *** [iwevent] Error 1 >>>>>>> | ERROR: oe_runmake failed >>>>>> >>>>>> >>>>>> >>>>>> >>>>> >>>>> I tested OE-Core builds for qemuppc >>>>> >>>>> 1. build from scratch ( MACHINE=qemuppc bitbake wirelesstools) >>>>> 2. build from sstate ( MACHINE=qemuppc bitbake -cclean wirelesstools >>>>> and then step 1) >>>>> 3. Build second time just wireless-tools ( MACHINE=qemuppc bitbake >>>>> -ccleanall wirelesstools and then step 1 ) >>>>> 4. Rebuild all from sstate ( rm -rf tmp/ and then step 1) >>>>> >>>>> I could not reproduce this issue at all. The differences are I did it >>>>> with OE-Core and not with Poky autbuilders run with poky distro >>>>> policies. >>>>> we should also actually regress OE-Core alone >>>>> >>>>> My build machine here is debian/wheezy and ubuntu 12.04 both 64bit) >>>>> >>>>> I am on commit c3f3fed1b397b6ee6d44e7d39e63d084e4a88e30 of OE-Core >>>>> >>>>> At this point I am out of ideas how to reproduce this. >>>>> >>>>> If there is some other developer out there who can try this patch and >>>>> get the same errors,that would be interesting and probably we >>>>> will get to root of it. >>>>> >>>>> >>>> Sorry Khem, failed again! >>>> >>>> Build Configuration: >>>> BB_VERSION = "1.21.1" >>>> BUILD_SYS = "x86_64-linux" >>>> NATIVELSBSTRING = "Ubuntu-13.10" >>>> TARGET_SYS = "powerpc-poky-linux" >>>> MACHINE = "qemuppc" >>>> DISTRO = "poky" >>>> DISTRO_VERSION = "1.5+snapshot-20140131" >>>> TUNE_FEATURES = "m32 fpu-hard ppc7400 altivec" >>>> TARGET_FPU = "" >>>> meta >>>> meta-yocto >>>> meta-yocto-bsp = "mut:980faeefaac3466aff38822479bf7d9fff4994eb" >>>> >>>> >>>> I did a bitbake -c cleansstate binutils-native eglibc wireless-tools >>>> followed by a bitbake of wireless-tools and I still get this same >>>> failure. >>>> >>> >>> OK still cant get it here. For above, you did those cmds on clean tmp/ >>> and sstate being around ? or tmp with previous build in there >>> >> Yes, but I just did another clean sstate, clean tmp dir of both of these >> build and they both still fail. >> >> Do you have a newer machine than 12.04? What's the compiler/binutils that >> you have on 12.04 for the native build. I have binutils-2.23.52 and >> gcc-4.8.1 on my Ubuntu 13.10. > > Mine is debian/wheezy here. I think I have access to 13.10 box > somewhere, let me try it there > > >> >> Sau! >> >> >>> >>>> My build info above. >>>> >>>> I tried with OE-Core alone and still got the same failure (this time with >>>> ARM!) >>>> >>>> Build Configuration: >>>> BB_VERSION = "1.21.1" >>>> BUILD_SYS = "x86_64-linux" >>>> NATIVELSBSTRING = "Ubuntu-13.10" >>>> TARGET_SYS = "arm-oe-linux-gnueabi" >>>> MACHINE = "qemuarm" >>>> DISTRO = "nodistro" >>>> DISTRO_VERSION = "nodistro.0" >>>> TUNE_FEATURES = "armv5 thumb dsp" >>>> TARGET_FPU = "soft" >>>> meta = "binutils:e20eeca128f362d500e19c5757e13cc7dab86b3a" >>>> >>>> >>>> Totally clean build area. >>>> >>> >>> and no sstate ? >>> >> >> Build again with NO Sstate and clean build area I was able to reproduce it, I have fixed it in wireless-tools and sent out a new patchset to ml as pull request, test it out in your setup >> >>>> >>>> >>>> Sau! >>>> >>> >>> >> ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2014-02-01 9:05 UTC | newest] Thread overview: 9+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2013-12-16 20:03 [RFC] Binutils upgrade to 2.24 Khem Raj 2013-12-16 20:08 ` Saul Wold 2013-12-19 15:21 ` Saul Wold 2014-01-30 4:33 ` Khem Raj 2014-01-31 21:36 ` Saul Wold 2014-01-31 22:08 ` Khem Raj 2014-01-31 22:35 ` Saul Wold 2014-01-31 23:42 ` Khem Raj 2014-02-01 9:05 ` Khem Raj
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox