* [PATCH 0/3] toshiba_acpi: Fix USB Sleep & Charge mode and documentation updates @ 2015-03-27 21:09 Azael Avalos 2015-03-27 21:09 ` [PATCH 1/3] toshiba_acpi: Update and fix USB Sleep and Charge modes Azael Avalos 2015-03-27 21:09 ` [PATCH 2/3] toshiba_acpi: Fix typos in pr_* messages from USB Fleep Functions Azael Avalos 0 siblings, 2 replies; 7+ messages in thread From: Azael Avalos @ 2015-03-27 21:09 UTC (permalink / raw) To: Darren Hart, platform-driver-x86, linux-kernel; +Cc: Azael Avalos This patch fixes the USB Sleep & Charge charging mode on certain models, fixes some typos in pr_* messages and also adds the missing entries in the documentation file. Azael Avalos (3): toshiba_acpi: Update and fix USB Sleep and Charge modes toshiba_acpi: Fix typos in pr_* messages from USB Fleep Functions Documentation/ABI: Update sysfs-driver-toshiba_acpi entry .../ABI/testing/sysfs-driver-toshiba_acpi | 93 +++++++++++++++++++--- drivers/platform/x86/toshiba_acpi.c | 77 ++++++++++++++---- 2 files changed, 140 insertions(+), 30 deletions(-) -- 2.2.2 ^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 1/3] toshiba_acpi: Update and fix USB Sleep and Charge modes 2015-03-27 21:09 [PATCH 0/3] toshiba_acpi: Fix USB Sleep & Charge mode and documentation updates Azael Avalos @ 2015-03-27 21:09 ` Azael Avalos 2015-03-28 2:53 ` Darren Hart 2015-03-27 21:09 ` [PATCH 2/3] toshiba_acpi: Fix typos in pr_* messages from USB Fleep Functions Azael Avalos 1 sibling, 1 reply; 7+ messages in thread From: Azael Avalos @ 2015-03-27 21:09 UTC (permalink / raw) To: Darren Hart, platform-driver-x86, linux-kernel; +Cc: Azael Avalos This patch fixes the USB Sleep and Charge mode on certain models where the value returned by the BIOS is different, and thus, making this feature not to work for those models. Also, the "Typical" charging mode was added as a supported mode. Signed-off-by: Azael Avalos <coproscefalo@gmail.com> --- drivers/platform/x86/toshiba_acpi.c | 61 +++++++++++++++++++++++++++++++------ 1 file changed, 52 insertions(+), 9 deletions(-) diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c index 17a259e..595f12c 100644 --- a/drivers/platform/x86/toshiba_acpi.c +++ b/drivers/platform/x86/toshiba_acpi.c @@ -150,9 +150,10 @@ MODULE_LICENSE("GPL"); #define SCI_KBD_MODE_OFF 0x10 #define SCI_KBD_TIME_MAX 0x3c001a #define SCI_USB_CHARGE_MODE_MASK 0xff -#define SCI_USB_CHARGE_DISABLED 0x30000 -#define SCI_USB_CHARGE_ALTERNATE 0x30009 -#define SCI_USB_CHARGE_AUTO 0x30021 +#define SCI_USB_CHARGE_DISABLED 0x00 +#define SCI_USB_CHARGE_ALTERNATE 0x09 +#define SCI_USB_CHARGE_TYPICAL 0x11 +#define SCI_USB_CHARGE_AUTO 0x21 #define SCI_USB_CHARGE_BAT_MASK 0x7 #define SCI_USB_CHARGE_BAT_LVL_OFF 0x1 #define SCI_USB_CHARGE_BAT_LVL_ON 0x4 @@ -177,6 +178,7 @@ struct toshiba_acpi_dev { int kbd_mode; int kbd_time; int usbsc_bat_level; + int usbsc_mode_base; int hotkey_event_type; unsigned int illumination_supported:1; @@ -800,6 +802,44 @@ static int toshiba_accelerometer_get(struct toshiba_acpi_dev *dev, } /* Sleep (Charge and Music) utilities support */ +static void toshiba_usb_sleep_charge_available(struct toshiba_acpi_dev *dev) +{ + u32 in[TCI_WORDS] = { SCI_GET, SCI_USB_SLEEP_CHARGE, 0, 0, 0, 0 }; + u32 out[TCI_WORDS]; + acpi_status status; + + if (!sci_open(dev)) + return; + + status = tci_raw(dev, in, out); + if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) { + pr_err("ACPI call to get USB S&C mode failed\n"); + sci_close(dev); + return; + } else if (out[0] == TOS_NOT_SUPPORTED) { + pr_info("USB Sleep and Charge not supported\n"); + sci_close(dev); + return; + } + dev->usbsc_mode_base = out[4]; + + in[5] = SCI_USB_CHARGE_BAT_LVL; + status = tci_raw(dev, in, out); + if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) { + pr_err("ACPI call to get USB S&C battery level failed\n"); + sci_close(dev); + return; + } else if (out[0] == TOS_NOT_SUPPORTED) { + pr_info("USB Sleep and Charge not supported\n"); + sci_close(dev); + return; + } + dev->usbsc_bat_level = out[2]; + dev->usb_sleep_charge_supported = 1; + + sci_close(dev); +} + static int toshiba_usb_sleep_charge_get(struct toshiba_acpi_dev *dev, u32 *mode) { @@ -1976,17 +2016,21 @@ static ssize_t usb_sleep_charge_store(struct device *dev, * 0 - Disabled * 1 - Alternate (Non USB conformant devices that require more power) * 2 - Auto (USB conformant devices) + * 3 - Typical */ - if (state != 0 && state != 1 && state != 2) + if (state != 0 && state != 1 && state != 2 && state != 3) return -EINVAL; /* Set the USB charging mode to internal value */ + mode = toshiba->usbsc_mode_base; if (state == 0) - mode = SCI_USB_CHARGE_DISABLED; + mode |= SCI_USB_CHARGE_DISABLED; else if (state == 1) - mode = SCI_USB_CHARGE_ALTERNATE; + mode |= SCI_USB_CHARGE_ALTERNATE; else if (state == 2) - mode = SCI_USB_CHARGE_AUTO; + mode |= SCI_USB_CHARGE_AUTO; + else if (state == 3) + mode |= SCI_USB_CHARGE_TYPICAL; ret = toshiba_usb_sleep_charge_set(toshiba, mode); if (ret) @@ -2756,8 +2800,7 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev) ret = toshiba_accelerometer_supported(dev); dev->accelerometer_supported = !ret; - ret = toshiba_usb_sleep_charge_get(dev, &dummy); - dev->usb_sleep_charge_supported = !ret; + toshiba_usb_sleep_charge_available(dev); ret = toshiba_usb_rapid_charge_get(dev, &dummy); dev->usb_rapid_charge_supported = !ret; -- 2.2.2 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH 1/3] toshiba_acpi: Update and fix USB Sleep and Charge modes 2015-03-27 21:09 ` [PATCH 1/3] toshiba_acpi: Update and fix USB Sleep and Charge modes Azael Avalos @ 2015-03-28 2:53 ` Darren Hart 2015-03-30 0:17 ` Azael Avalos 0 siblings, 1 reply; 7+ messages in thread From: Darren Hart @ 2015-03-28 2:53 UTC (permalink / raw) To: Azael Avalos; +Cc: platform-driver-x86, linux-kernel On Fri, Mar 27, 2015 at 03:09:24PM -0600, Azael Avalos wrote: > This patch fixes the USB Sleep and Charge mode on certain models > where the value returned by the BIOS is different, and thus, making > this feature not to work for those models. > > Also, the "Typical" charging mode was added as a supported mode. What does typical mean? > > Signed-off-by: Azael Avalos <coproscefalo@gmail.com> > --- > drivers/platform/x86/toshiba_acpi.c | 61 +++++++++++++++++++++++++++++++------ > 1 file changed, 52 insertions(+), 9 deletions(-) > > diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c > index 17a259e..595f12c 100644 > --- a/drivers/platform/x86/toshiba_acpi.c > +++ b/drivers/platform/x86/toshiba_acpi.c > @@ -150,9 +150,10 @@ MODULE_LICENSE("GPL"); > #define SCI_KBD_MODE_OFF 0x10 > #define SCI_KBD_TIME_MAX 0x3c001a > #define SCI_USB_CHARGE_MODE_MASK 0xff > -#define SCI_USB_CHARGE_DISABLED 0x30000 > -#define SCI_USB_CHARGE_ALTERNATE 0x30009 > -#define SCI_USB_CHARGE_AUTO 0x30021 > +#define SCI_USB_CHARGE_DISABLED 0x00 > +#define SCI_USB_CHARGE_ALTERNATE 0x09 > +#define SCI_USB_CHARGE_TYPICAL 0x11 > +#define SCI_USB_CHARGE_AUTO 0x21 > #define SCI_USB_CHARGE_BAT_MASK 0x7 > #define SCI_USB_CHARGE_BAT_LVL_OFF 0x1 > #define SCI_USB_CHARGE_BAT_LVL_ON 0x4 > @@ -177,6 +178,7 @@ struct toshiba_acpi_dev { > int kbd_mode; > int kbd_time; > int usbsc_bat_level; > + int usbsc_mode_base; > int hotkey_event_type; > > unsigned int illumination_supported:1; > @@ -800,6 +802,44 @@ static int toshiba_accelerometer_get(struct toshiba_acpi_dev *dev, > } > > /* Sleep (Charge and Music) utilities support */ > +static void toshiba_usb_sleep_charge_available(struct toshiba_acpi_dev *dev) > +{ > + u32 in[TCI_WORDS] = { SCI_GET, SCI_USB_SLEEP_CHARGE, 0, 0, 0, 0 }; > + u32 out[TCI_WORDS]; > + acpi_status status; > + > + if (!sci_open(dev)) > + return; > + Hrm, might be a good idea to set usb_sleep_charge_supported to 0 first so if we error out here, it is disabled. > + status = tci_raw(dev, in, out); > + if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) { > + pr_err("ACPI call to get USB S&C mode failed\n"); > + sci_close(dev); > + return; > + } else if (out[0] == TOS_NOT_SUPPORTED) { > + pr_info("USB Sleep and Charge not supported\n"); > + sci_close(dev); > + return; > + } > + dev->usbsc_mode_base = out[4]; > + > + in[5] = SCI_USB_CHARGE_BAT_LVL; > + status = tci_raw(dev, in, out); > + if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) { > + pr_err("ACPI call to get USB S&C battery level failed\n"); Sleep and Charge here too please. This keeps it consistent with the other messages as well as explicit for those who may not map S&C to Sleep and Charge. > + sci_close(dev); > + return; > + } else if (out[0] == TOS_NOT_SUPPORTED) { > + pr_info("USB Sleep and Charge not supported\n"); > + sci_close(dev); > + return; > + } > + dev->usbsc_bat_level = out[2]; > + dev->usb_sleep_charge_supported = 1; > + > + sci_close(dev); > +} > + > static int toshiba_usb_sleep_charge_get(struct toshiba_acpi_dev *dev, > u32 *mode) > { > @@ -1976,17 +2016,21 @@ static ssize_t usb_sleep_charge_store(struct device *dev, > * 0 - Disabled > * 1 - Alternate (Non USB conformant devices that require more power) > * 2 - Auto (USB conformant devices) > + * 3 - Typical > */ > - if (state != 0 && state != 1 && state != 2) > + if (state != 0 && state != 1 && state != 2 && state != 3) > return -EINVAL; > > /* Set the USB charging mode to internal value */ > + mode = toshiba->usbsc_mode_base; > if (state == 0) > - mode = SCI_USB_CHARGE_DISABLED; > + mode |= SCI_USB_CHARGE_DISABLED; > else if (state == 1) > - mode = SCI_USB_CHARGE_ALTERNATE; > + mode |= SCI_USB_CHARGE_ALTERNATE; > else if (state == 2) > - mode = SCI_USB_CHARGE_AUTO; > + mode |= SCI_USB_CHARGE_AUTO; > + else if (state == 3) > + mode |= SCI_USB_CHARGE_TYPICAL; > > ret = toshiba_usb_sleep_charge_set(toshiba, mode); > if (ret) > @@ -2756,8 +2800,7 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev) > ret = toshiba_accelerometer_supported(dev); > dev->accelerometer_supported = !ret; > > - ret = toshiba_usb_sleep_charge_get(dev, &dummy); > - dev->usb_sleep_charge_supported = !ret; > + toshiba_usb_sleep_charge_available(dev); > > ret = toshiba_usb_rapid_charge_get(dev, &dummy); > dev->usb_rapid_charge_supported = !ret; The rest looks good. -- Darren Hart Intel Open Source Technology Center ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 1/3] toshiba_acpi: Update and fix USB Sleep and Charge modes 2015-03-28 2:53 ` Darren Hart @ 2015-03-30 0:17 ` Azael Avalos 0 siblings, 0 replies; 7+ messages in thread From: Azael Avalos @ 2015-03-30 0:17 UTC (permalink / raw) To: Darren Hart Cc: platform-driver-x86@vger.kernel.org, linux-kernel@vger.kernel.org Hi Darren, 2015-03-27 20:53 GMT-06:00 Darren Hart <dvhart@infradead.org>: > On Fri, Mar 27, 2015 at 03:09:24PM -0600, Azael Avalos wrote: >> This patch fixes the USB Sleep and Charge mode on certain models >> where the value returned by the BIOS is different, and thus, making >> this feature not to work for those models. >> >> Also, the "Typical" charging mode was added as a supported mode. > > What does typical mean? Can't really help you here :-( Toshiba does not provide specifics as to what each mode does or represent, they simply state that if one mode does not work, try another... There are more charging modes but I will add them as soon as I find their values, the following list the charging modes currently not known. - Mode 1 - Mode 2 - Tablet One can infer what the "Tablet" mode does, but as for the rest... > >> >> Signed-off-by: Azael Avalos <coproscefalo@gmail.com> >> --- >> drivers/platform/x86/toshiba_acpi.c | 61 +++++++++++++++++++++++++++++++------ >> 1 file changed, 52 insertions(+), 9 deletions(-) >> >> diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c >> index 17a259e..595f12c 100644 >> --- a/drivers/platform/x86/toshiba_acpi.c >> +++ b/drivers/platform/x86/toshiba_acpi.c >> @@ -150,9 +150,10 @@ MODULE_LICENSE("GPL"); >> #define SCI_KBD_MODE_OFF 0x10 >> #define SCI_KBD_TIME_MAX 0x3c001a >> #define SCI_USB_CHARGE_MODE_MASK 0xff >> -#define SCI_USB_CHARGE_DISABLED 0x30000 >> -#define SCI_USB_CHARGE_ALTERNATE 0x30009 >> -#define SCI_USB_CHARGE_AUTO 0x30021 >> +#define SCI_USB_CHARGE_DISABLED 0x00 >> +#define SCI_USB_CHARGE_ALTERNATE 0x09 >> +#define SCI_USB_CHARGE_TYPICAL 0x11 >> +#define SCI_USB_CHARGE_AUTO 0x21 >> #define SCI_USB_CHARGE_BAT_MASK 0x7 >> #define SCI_USB_CHARGE_BAT_LVL_OFF 0x1 >> #define SCI_USB_CHARGE_BAT_LVL_ON 0x4 >> @@ -177,6 +178,7 @@ struct toshiba_acpi_dev { >> int kbd_mode; >> int kbd_time; >> int usbsc_bat_level; >> + int usbsc_mode_base; >> int hotkey_event_type; >> >> unsigned int illumination_supported:1; >> @@ -800,6 +802,44 @@ static int toshiba_accelerometer_get(struct toshiba_acpi_dev *dev, >> } >> >> /* Sleep (Charge and Music) utilities support */ >> +static void toshiba_usb_sleep_charge_available(struct toshiba_acpi_dev *dev) >> +{ >> + u32 in[TCI_WORDS] = { SCI_GET, SCI_USB_SLEEP_CHARGE, 0, 0, 0, 0 }; >> + u32 out[TCI_WORDS]; >> + acpi_status status; >> + >> + if (!sci_open(dev)) >> + return; >> + > > Hrm, might be a good idea to set usb_sleep_charge_supported to 0 first so if we > error out here, it is disabled. Ok, will do in v2. > >> + status = tci_raw(dev, in, out); >> + if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) { >> + pr_err("ACPI call to get USB S&C mode failed\n"); >> + sci_close(dev); >> + return; >> + } else if (out[0] == TOS_NOT_SUPPORTED) { >> + pr_info("USB Sleep and Charge not supported\n"); >> + sci_close(dev); >> + return; >> + } >> + dev->usbsc_mode_base = out[4]; >> + >> + in[5] = SCI_USB_CHARGE_BAT_LVL; >> + status = tci_raw(dev, in, out); >> + if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) { >> + pr_err("ACPI call to get USB S&C battery level failed\n"); > > Sleep and Charge here too please. This keeps it consistent with the other > messages as well as explicit for those who may not map S&C to Sleep and Charge. Ok, will do in v2. > >> + sci_close(dev); >> + return; >> + } else if (out[0] == TOS_NOT_SUPPORTED) { >> + pr_info("USB Sleep and Charge not supported\n"); >> + sci_close(dev); >> + return; >> + } >> + dev->usbsc_bat_level = out[2]; >> + dev->usb_sleep_charge_supported = 1; >> + >> + sci_close(dev); >> +} >> + >> static int toshiba_usb_sleep_charge_get(struct toshiba_acpi_dev *dev, >> u32 *mode) >> { >> @@ -1976,17 +2016,21 @@ static ssize_t usb_sleep_charge_store(struct device *dev, >> * 0 - Disabled >> * 1 - Alternate (Non USB conformant devices that require more power) >> * 2 - Auto (USB conformant devices) >> + * 3 - Typical >> */ >> - if (state != 0 && state != 1 && state != 2) >> + if (state != 0 && state != 1 && state != 2 && state != 3) >> return -EINVAL; >> >> /* Set the USB charging mode to internal value */ >> + mode = toshiba->usbsc_mode_base; >> if (state == 0) >> - mode = SCI_USB_CHARGE_DISABLED; >> + mode |= SCI_USB_CHARGE_DISABLED; >> else if (state == 1) >> - mode = SCI_USB_CHARGE_ALTERNATE; >> + mode |= SCI_USB_CHARGE_ALTERNATE; >> else if (state == 2) >> - mode = SCI_USB_CHARGE_AUTO; >> + mode |= SCI_USB_CHARGE_AUTO; >> + else if (state == 3) >> + mode |= SCI_USB_CHARGE_TYPICAL; >> >> ret = toshiba_usb_sleep_charge_set(toshiba, mode); >> if (ret) >> @@ -2756,8 +2800,7 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev) >> ret = toshiba_accelerometer_supported(dev); >> dev->accelerometer_supported = !ret; >> >> - ret = toshiba_usb_sleep_charge_get(dev, &dummy); >> - dev->usb_sleep_charge_supported = !ret; >> + toshiba_usb_sleep_charge_available(dev); >> >> ret = toshiba_usb_rapid_charge_get(dev, &dummy); >> dev->usb_rapid_charge_supported = !ret; > > The rest looks good. > > -- > Darren Hart > Intel Open Source Technology Center Cheers Azael -- -- El mundo apesta y vosotros apestais tambien -- ^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 2/3] toshiba_acpi: Fix typos in pr_* messages from USB Fleep Functions 2015-03-27 21:09 [PATCH 0/3] toshiba_acpi: Fix USB Sleep & Charge mode and documentation updates Azael Avalos 2015-03-27 21:09 ` [PATCH 1/3] toshiba_acpi: Update and fix USB Sleep and Charge modes Azael Avalos @ 2015-03-27 21:09 ` Azael Avalos 2015-03-28 2:58 ` Darren Hart 1 sibling, 1 reply; 7+ messages in thread From: Azael Avalos @ 2015-03-27 21:09 UTC (permalink / raw) To: Darren Hart, platform-driver-x86, linux-kernel; +Cc: Azael Avalos This patch fixes typos in the pr_* messages from the USB Sleep Functions. Signed-off-by: Azael Avalos <coproscefalo@gmail.com> --- drivers/platform/x86/toshiba_acpi.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c index 595f12c..3bb456c 100644 --- a/drivers/platform/x86/toshiba_acpi.c +++ b/drivers/platform/x86/toshiba_acpi.c @@ -955,11 +955,11 @@ static int toshiba_usb_rapid_charge_get(struct toshiba_acpi_dev *dev, status = tci_raw(dev, in, out); sci_close(dev); if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) { - pr_err("ACPI call to get USB S&C battery level failed\n"); + pr_err("ACPI call to get USB Rapid Charge failed\n"); return -EIO; } else if (out[0] == TOS_NOT_SUPPORTED || out[0] == TOS_INPUT_DATA_ERROR) { - pr_info("USB Sleep and Charge not supported\n"); + pr_info("USB Rapid Charge not supported\n"); return -ENODEV; } @@ -983,10 +983,10 @@ static int toshiba_usb_rapid_charge_set(struct toshiba_acpi_dev *dev, status = tci_raw(dev, in, out); sci_close(dev); if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) { - pr_err("ACPI call to set USB S&C battery level failed\n"); + pr_err("ACPI call to set USB Rapid Charge failed\n"); return -EIO; } else if (out[0] == TOS_NOT_SUPPORTED) { - pr_info("USB Sleep and Charge not supported\n"); + pr_info("USB Rapid Charge not supported\n"); return -ENODEV; } else if (out[0] == TOS_INPUT_DATA_ERROR) { return -EIO; @@ -1005,10 +1005,10 @@ static int toshiba_usb_sleep_music_get(struct toshiba_acpi_dev *dev, u32 *state) result = sci_read(dev, SCI_USB_SLEEP_MUSIC, state); sci_close(dev); if (result == TOS_FAILURE) { - pr_err("ACPI call to set USB S&C mode failed\n"); + pr_err("ACPI call to set Sleep and Music mode failed\n"); return -EIO; } else if (result == TOS_NOT_SUPPORTED) { - pr_info("USB Sleep and Charge not supported\n"); + pr_info("Sleep and Music not supported\n"); return -ENODEV; } else if (result == TOS_INPUT_DATA_ERROR) { return -EIO; @@ -1027,10 +1027,10 @@ static int toshiba_usb_sleep_music_set(struct toshiba_acpi_dev *dev, u32 state) result = sci_write(dev, SCI_USB_SLEEP_MUSIC, state); sci_close(dev); if (result == TOS_FAILURE) { - pr_err("ACPI call to set USB S&C mode failed\n"); + pr_err("ACPI call to set Sleep and Music mode failed\n"); return -EIO; } else if (result == TOS_NOT_SUPPORTED) { - pr_info("USB Sleep and Charge not supported\n"); + pr_info("Sleep and Music not supported\n"); return -ENODEV; } else if (result == TOS_INPUT_DATA_ERROR) { return -EIO; -- 2.2.2 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH 2/3] toshiba_acpi: Fix typos in pr_* messages from USB Fleep Functions 2015-03-27 21:09 ` [PATCH 2/3] toshiba_acpi: Fix typos in pr_* messages from USB Fleep Functions Azael Avalos @ 2015-03-28 2:58 ` Darren Hart 2015-03-30 0:19 ` Azael Avalos 0 siblings, 1 reply; 7+ messages in thread From: Darren Hart @ 2015-03-28 2:58 UTC (permalink / raw) To: Azael Avalos; +Cc: platform-driver-x86, linux-kernel On Fri, Mar 27, 2015 at 03:09:25PM -0600, Azael Avalos wrote: > This patch fixes typos in the pr_* messages from the USB Sleep > Functions. > > Signed-off-by: Azael Avalos <coproscefalo@gmail.com> > --- > drivers/platform/x86/toshiba_acpi.c | 16 ++++++++-------- > 1 file changed, 8 insertions(+), 8 deletions(-) > > diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c > index 595f12c..3bb456c 100644 > --- a/drivers/platform/x86/toshiba_acpi.c > +++ b/drivers/platform/x86/toshiba_acpi.c > @@ -955,11 +955,11 @@ static int toshiba_usb_rapid_charge_get(struct toshiba_acpi_dev *dev, > status = tci_raw(dev, in, out); > sci_close(dev); > if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) { > - pr_err("ACPI call to get USB S&C battery level failed\n"); > + pr_err("ACPI call to get USB Rapid Charge failed\n"); > return -EIO; > } else if (out[0] == TOS_NOT_SUPPORTED || > out[0] == TOS_INPUT_DATA_ERROR) { > - pr_info("USB Sleep and Charge not supported\n"); > + pr_info("USB Rapid Charge not supported\n"); This is a name change, not a typo fix. You added a comment in 1/3 using Sleep and Charge, should this patch perhaps come first? Or... hrm... this is using the correct name for each state, and 1/3 added Sleep and Charge to the correct one... right, probably just need a better commit message. Not a type, but fixing the messages reporting the wrong states. -- Darren Hart Intel Open Source Technology Center ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 2/3] toshiba_acpi: Fix typos in pr_* messages from USB Fleep Functions 2015-03-28 2:58 ` Darren Hart @ 2015-03-30 0:19 ` Azael Avalos 0 siblings, 0 replies; 7+ messages in thread From: Azael Avalos @ 2015-03-30 0:19 UTC (permalink / raw) To: Darren Hart Cc: platform-driver-x86@vger.kernel.org, linux-kernel@vger.kernel.org Hi Darren, 2015-03-27 20:58 GMT-06:00 Darren Hart <dvhart@infradead.org>: > On Fri, Mar 27, 2015 at 03:09:25PM -0600, Azael Avalos wrote: >> This patch fixes typos in the pr_* messages from the USB Sleep >> Functions. >> >> Signed-off-by: Azael Avalos <coproscefalo@gmail.com> >> --- >> drivers/platform/x86/toshiba_acpi.c | 16 ++++++++-------- >> 1 file changed, 8 insertions(+), 8 deletions(-) >> >> diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c >> index 595f12c..3bb456c 100644 >> --- a/drivers/platform/x86/toshiba_acpi.c >> +++ b/drivers/platform/x86/toshiba_acpi.c >> @@ -955,11 +955,11 @@ static int toshiba_usb_rapid_charge_get(struct toshiba_acpi_dev *dev, >> status = tci_raw(dev, in, out); >> sci_close(dev); >> if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) { >> - pr_err("ACPI call to get USB S&C battery level failed\n"); >> + pr_err("ACPI call to get USB Rapid Charge failed\n"); >> return -EIO; >> } else if (out[0] == TOS_NOT_SUPPORTED || >> out[0] == TOS_INPUT_DATA_ERROR) { >> - pr_info("USB Sleep and Charge not supported\n"); >> + pr_info("USB Rapid Charge not supported\n"); > > This is a name change, not a typo fix. You added a comment in 1/3 using Sleep > and Charge, should this patch perhaps come first? > > Or... hrm... this is using the correct name for each state, and 1/3 added Sleep > and Charge to the correct one... right, probably just need a better commit > message. Not a type, but fixing the messages reporting the wrong states. Ok, will change in v2 and resend in a few minutes. > > -- > Darren Hart > Intel Open Source Technology Center Cheers Azael -- -- El mundo apesta y vosotros apestais tambien -- ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2015-03-30 0:19 UTC | newest] Thread overview: 7+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2015-03-27 21:09 [PATCH 0/3] toshiba_acpi: Fix USB Sleep & Charge mode and documentation updates Azael Avalos 2015-03-27 21:09 ` [PATCH 1/3] toshiba_acpi: Update and fix USB Sleep and Charge modes Azael Avalos 2015-03-28 2:53 ` Darren Hart 2015-03-30 0:17 ` Azael Avalos 2015-03-27 21:09 ` [PATCH 2/3] toshiba_acpi: Fix typos in pr_* messages from USB Fleep Functions Azael Avalos 2015-03-28 2:58 ` Darren Hart 2015-03-30 0:19 ` Azael Avalos
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox